Itunes on my pc will not open or do anything.

I have been trying to open Itunes on my desktop pc for days and nothing happens, everytime I click on it nothing happens, nothing comes up, no error messages or anything, tried to open in safemode and nothing happened. My computer and all my other programs are working same as always. Itunes used to work, I didn't update or change it recently. I have tried uninstalling and reinstalling it many times, I tried installing an older version of it, I also tried uninstalling Quicktime because I saw people said to do that online but that didn't work so I installed the newest version of Quicktime. I don;t know what to do to fix it and have spent several hours trying to fix it. I even emailed customer service and all I got back was an email repeating the problems I said like it was helpful and then telling me to come here.

Hi there turtlecereal,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issueshttp://support.apple.com/kb/ts1717
-Griff W. 

Similar Messages

  • Downloaded new version of itunes and now it will not open on my Macbook

    downloaded new version of itunes and now it will not open on my Macbook

    downloaded new version of itunes and now it will not open on my Macbook

  • ITunes U Course Manager will not open on my PC. When I open the web address the page loads blank.

    iTunes U Course Manager will not open on my PC. When I open the web address the page loads blank. Would like to design a new course.

    Try to using the latest version of Safari Browser or Mozilla Firefox.

  • Just installed latest upgrade to iTunes and now it will not open

    Just installed the latest upgrade to itunes and now it will not open.  I have followed all of the troubleshooting steps i could find online and still nothing.  I have even restored my computer three times to 3 different restore points and that had no effect.  Please help.

    Hi Jeff,
    see for your problem:
    http://pcsupport.about.com/od/findbyerrormessage/a/msvcr80-dll-not-found-missing -error.htm
    it worked for me.
    Grtz

  • Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

    Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
    I took a very quick look at the app, so I may be a missing something about its capability.

  • HT2311 Help! iTunes update 10.7 will not open: What to do??

    Help! iTunes update 10.7 will not open: WHAT TO DO?
    Recently I updated to Snow Leopard from 10.5.8  and then updated to 10.6.8. The recent update to itunes 10.7 has completely failed as iTunes fails to boot up and just send a message to Apple. So now I cannot access my music library. I tried deleting the new iTunes 10.7 and reinstalling iTunes 10.6.3 and also 10.3.1 with exactly the same result. I did the installation after turning off as many background software items as I could like Sophos Anti Virus and Little Snitch. This makes one want to give up on software updates - I have had an increasing number of failures as my machine gets to 5 years old.
    Macbook:
    Model: MacBook3,1, BootROM MB31.008E.B02, 2 processors, Intel Core 2 Duo, 2.2 GHz, 4 GB, SMC 1.24f3
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB

    OK  - I have found my own fix in an older thread / discussion:-
    iTunes 10 for Mac: May quit unexpectedly on launch
    http://support.apple.com/kb/TS3494
    basically from home/Library/Quicktime one has to remove the file: DesktopVideoOut.component
    Is this to do with Flip4Mac?

  • Itunes 10.4.1 will not open. I am using Lion.

    I am using Lion and Itunes 10.4.1 will not open. It goes into an ongoing loop that only allows a force quit. I repaired permissions but it didn't help. The only way to upgrade my OS for ipod is through Itunes on the computer!

    It looks like the iPhoto window but stays on a blank white screen with the spinning ball. I have to force quit to stop it.

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • I downloaded the new version of iTunes and now it will not open.

    I opened my iTunes a day ago, and the "Download new version" came up.
    I went and downloaded it and ever since iTunes will not open no matter what, I have tryed many ways to open it and it still wont open.
    When I go to log off, shutdown, or restart my computer, it will not. I can only shut it down and I have to do it maunally. But if I wait around for it to shutdown, ect. a "Ending Program" annoucement comes up and has the iTunes icon, but for the name of the progrom it is only a bunch of little and big boxes.
    I do not know what to do, I have unistalled iTunes and Quicktime, then installed it again and still nothing. I even tryed to do the "Repair" that comes up when you already have it installed and still nothing.
    Can anyone help me? Or does anyone else have this problem?
    hp   Windows XP  

    hey peeps i got a possible answer to our prolems. i contacted apple support and this is what they gave me:
    Using MSCONFIG to troubleshoot conflicts in Windows
    In Windows, some background processes can cause issues for other programs and processes. These conflicts can prevent applications such as iTunes and QuickTime Player from working correctly, opening, or even installing. You might be able to resolve these conflicts by disabling some items using the System Configuration Utility (MSCONFIG) in Windows XP. This utility is not included with Windows 2000.
    Important: Disabling third-party System Services and Startup Items can prevent some software or OEM hardware on your computer from working correctly. For example, this can affect the CD/DVD control buttons on portable computers.
    1. On the Start menu, click Run. A Run window (command prompt) appears.
    2. Type msconfig in the Open field and click OK. The System Configuration Utility opens.
    3. Click the General tab.
    4. Select the "Selective Startup" option.
    5. Deselect the "Load Startup Items" checkbox.
    6. Click the Startup tab.
    7. Select the "iTunesHelper" and "qttask" checkboxes in the list.
    8. Click the Services tab.
    9. Make sure that "Hide All Microsoft Services" is selected.
    10. Click Disable All.
    11. Select the iPodService checkbox in the list.
    12. Click OK.
    13. Click Restart.
    If following these steps resolves the issue, you may want to use the System Configuration Utility to turn on the third-party System Services and Startup Items one or a few at a time (restarting your computer after turning on the item or items) to identify which System Service or Startup Item is causing the conflict. You can turn all of them back on by selecting the Normal Startup option under the General tab of the System Configuration Utility window, but please note that this may cause the issue to recur.
    Important: Information about products not manufactured by Apple is provided for information purposes only and does not constitute Apple's recommendation or endorsement. Please contact the vendor for additional information.
    DISCLAIMER
    THE INFORMATION IN THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. APPLE DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. MOREOVER, APPLE COMPUTER, INC. DOES NOT WARRANT OR MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE OF THE INFORMATION CONTAINED HEREIN IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, OR OTHERWISE. YOU ASSUME TOTAL RESPONSIBILITY FOR YOUR USE OF THE INFORMATION. YOUR SOLE REMEDY AGAINST APPLE FOR DISSATISFACTION WITH THE INFORMATION IS TO STOP USING THE INFORMATION.
    Thank you,
    Apple
    now...it worked for me, and after i got iTunes to work i went back on the msconfig and i enabled all of the third party system services and start-up items so that all of my stuff worked again. read the dirctions carefully and thoroughly before using these directions. i was being helped by a professional and i am not taking responsibility if anyone does antyhing bad to their computer. my advice is you should set a system restore point before making all these changes.hope it works for ya guys!!!
    Asus, AMD Athlon 1.7 ghz, 1 gb RAM Windows XP

  • My PC has itunes in downloads but will not open or run

    I have a windows oper sys, Vista. I am trying to download Itunes. It shows in my download menu, but will not open or run. Any ideas how to fix?

    Hi, rvrguy. 
    You may find this article helpful when troubleshooting the issue you experiencing.
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Regards,
    Jason H.

  • ITunes installs properly, but will not open

    I have just upgraded from iTunes 6.0.1 to 6.0.2
    Everything installed correctly, and I am receiving no error messages; the program simply will not open. I have uninstalled and reinstalled multiple times, and I have exactly the same problem each time.
    My music files (including ones that I purchased from Apple's music store) will open with other players, but will not open with the newly installed v6.0.2
    I am running Norton Internet security, but the problem still occurs after I disable the program.
    Any assistance is appreciated.
    Gateway 400VTX   Windows XP  

    Well, that annoying. So, I am a bit confused here. Does iTunes launch at all or sometimes? BTW, You need to Configure Norton to allow iTunes to open. Otherwise, it will continue to block it silently.
    Do you see, under your Processes tab in your Windows Task Manager, both Quicktime and iTunes?

  • Windows Vista Issue: iTunes auto-updated, now will not open

    Computer: Dell XPS 400
    OS: Windows Vista Ultimate
    I was running a version of iTunes that I recently downloaded after installing Windows Vista Ultimate. Yesterday, Apple Updater updated my iTunes install to version 7.1.3.1 and now iTunes will not open.
    I have tried uninstalling, registry cleaners, running as administrator, using compatibility mode, etc. I have tried virtually everything listed on these forums and nothing has worked.
    iTunes.exe will run under Processes in Task Manager, but will never open.
    Does anyone have any ideas? Is Apple planning on fixing this apparant bug in future releases?

    This problem is evidently extremely common, as there are many posts saying essentially the same thing about 7.3.1. I installed it and ran into a number of problems immediately, the least of which was that iTunes does not run. The UI appears, but never gets focus so does not respond to any mouse or KB events. There is no error message of any kind. Deleting the preferences files does nothing. Deep removal of all things iTunes (folders, leftover registry keys, etc.) followed by a clean reinstall does not change the situation.
    Worse, 7.3.1 uses lots of CPU power (both cores >50% for seconds at a time) while doing exactly nothing. While I appreciate that Apple and Microsoft are dedicated to ensuring that no CPU is left unhammered, this is a bit much.
    I have the same version as a clean (first time ever) iTunes install on an XP laptop, and that, so far, is benign.

  • Updated to iTunes 11 now it will not open or uninstall- Windows 8 64bit

    Updated to iTunes 11 using the "check for updates" tab on iTunes. I installed and realized it will not open. Turns out it installed the 32bit version (I did not have any option to choose between 32bit and 64bit). Nothing was going right so I attemped to unistall it using the controll panel and going to unistall programs. It in a way uninstalled, there is no iTunes folder on my hard drive or anything so I am guessing it did uninstall? Anyways, I attemted to download and install iTunes 11 (The actually 64bit) again but here is what happens: It will download everything but it will not open to install. Help?

    See here: https://discussions.apple.com/thread/4555900?tstart=30

  • Itunes 10.7 freezing/will not open

    Hello Everyone,
    I recently purchased a new mac mini.  I've set up the computer, transferred files, and updated my software.  Everything seems to be working great, with the exception of itunes.  When I attempt to open itunes one of two things happens - 1) nothing or 2) if wait long enough, itunes will appear, but it's unresponsive - I get the spinning ball if I click on anything.  As I type this, I've been waiting for about 10 minutes for a song to begin playing. 
    Any ideas?  I'm not getting any error messages at this point or seeing anything else that suggests what is causing the problem.
    Not sure it matters, but the new computer is a mac mini running OS X 10.8.2, 2.5 GHz Intel Core i5, 4GB memory and itunes version 10.7.
    Thanks.

    I tried removing Bonjour, and it didn't work for me. I should mention my Windows 7 is 64-bit. Just like mervingry, I get no error messages - it simply doesn't open. Help!

  • Itunes 11.1.3 will not open after Mavericks installation.

    After installing Mavericks, Itunes refuses to open.
    No errors or menu options display and library window does not open. Have tried reinstalling Mavericks with same issue, and wishing to avoid clean install.

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    iPad not appearing in iTunes
    http://www.apple.com/support/ipad/assistant/itunes/
    iOS: Device not recognized in iTunes for Mac OS X
    http://support.apple.com/kb/TS1591
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    iTunes for Windows: Device Sync Tests
    http://support.apple.com/kb/HT4235
    IOS: Syncing with iTunes
    http://support.apple.com/kb/HT1386
    Apple - Support - iPad - Syncing
    http://www.apple.com/support/ipad/syncing/
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/ts4062
     Cheers, Tom

Maybe you are looking for

  • Save as word

    Hello, We just bought a new macbook pro, and one of the first purchases we made was Pages'11.  I am finding that while it "can" create word documents, when I open them on the PC the formatting is just off.  These are not fancy documents we are creati

  • Changing numerical values in any object not working correctly

    I'm trying to create new parts and I want to adjust things like hole diameter, body length, offset height. When I go to change the numerical values......I highlight the numbers and start typing my new value and it just adds random numbers to the fiel

  • JSP not compiled by JASPER, but OK by hand

    If I alter my JSPs, I get the message at the bottom. However, if I go to the work directory and manually do a JAVAC on the _jsp.java file, it compiles fine and I can refresh the page and it is now fine.  I'm using a bean, and to make it work by hand

  • Create stored procedure or function of pl/sql in jdeveloper

    How can we create a stored procedure or function of pl/sql in jdeveloper 11.1.2.1.0? And how it will be called? Please help me? Edited by: mrs on 4 Jul, 2012 3:07 AM

  • Software Component in two tracks

    Hi, I have created a software component in SLD and created a track in NWDI. I have imported that track in my NWDS and have added DCs to my SC. My SC has been deployed to all the runtime environments correctly. Now I want to deploy the content of this