Itunes on two sites, and only one ipod? help please

have itunes at home (on a mac) and at another location (on a pc) - simple enough, but my library is at home and i have limited tracks at the other venue. but when i plug in the ipod the alternate itunes wants to make it the default "home". my question is am i able to change this to act only as a secondary "hub" as it were, i cant seem to find anything in the pref's to do this.

hi,
firstly - thanks alot for the reply, it is good to know there are people willing to help (i tried another forum and got nowhere.)
secondly - trying to change the preferences on the windows based machine, it does not allow alteration until the ipod is connected, but when i do connect it it asks me to change to it (being the windows pc)the default library - and when i decline the ipod is not connected to itunes. being new to the mac experience (both ipod and computer) i know there is prob an easy way round this but i am afraid i cant see it.
any chance of an idiots guide?
thanks for looking and the help so far

Similar Messages

  • We have two iphones and only one ipad.  We want to be able to use "find my iphone" for both phones, which have separate apple ids.  How do we get our ipad to accept this?

    We have two iphones and only one ipad - no mac.  We want to be able to use "find my iphone" for both phones.  How do we get the ipad to accept two iphone accounts?  icloud is enabled on all three devices. 

    Also, be aware of the following:
    The "Find my..." function is pretty much useless if the device is in the hands of a thief.  All that is necessary is for the thief to connect to any computer with iTunes and "Restore as new."
    The only real protection you have is with the personal information on the device rather than the physical device itself.  Something as small as an iPod/iPhone should have a strong 8-digit (or longer) password AND be configured for automatic wipe in the event of ten consecutive incorrect password entries.

  • Auto loading of username and password are taking place on one site and only one site and I do not want this to happen but can"t get it to stop.

    As my question states I don't want auto loading on any site and it only happens on this one site. I have went thru tools and options and there are no sites listed for auto loading. There are no saved passwords. If I go to the site using Internet explorer the problem does not occur.

    Ok, no problem i found this help articles:
    https://support.mozilla.org/en-US/kb/how-clear-firefox-cache
    http://www.youtube.com/watch?v=OukBlXfOP8Y

  • Can you use iTunes on two different computers for one iPod?

    My computer broke and it is currently being fixed, but in the meantime I want to update my iPod. Does anyone know if I can download iTunes on a different computer and plug in my iPod to put the songs I currently have and put different ones on. Also, if I do that will it be able to work on my computer when I get it fixed? Thanks

    Read http://docs.info.apple.com/article.html?artnum=61675.
    That should answer your problem.
    Anything else, just repost
    rjl
    Please remember to help those who helped you by making your thread "solved".   Windows XP Pro   I want a Mac so badly!

  • Two 9320 Curve on one account - Help please :-)

    I have two BB Curve 9320 on one email account with separate ID's and pin. One device BBM locked out and asked to verify log in details. Tried this but device synced BBM contacts from other device. Any ideas on how to create individual identities for each device would be welcomed
    Many thanks

    Hi izzywizzy
    Welcome to Support Forums
    You cannot have the same email address as your BlackBerry ID on both of your devices , because this newer BBM version integrates with your BlackBerry ID.
    So if you remember your email and the password of your BlackBeerry ID then from a PC go to www.blackberry.com/blackberryid  first try changing the Username or the email associated with any one of your device , for further help refer to this Knowledge Base :
    KB28060 : How to change or update a BlackBerry ID username on the BlackBerry ID website.
    Please try it and see if that resolves your issue.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • "SCR24 style lid with window function".And only one adaptor for DK48

    I recently purchased the product "SCR24 style lid with window function". The contents of the box is the adapter for the "dock" DK48, the problem that I find is that I have two DK48 and only one adapter. Is official that the Sony's answer is:" every time you want to charge, remove from the dock and put on the other. There is no spare part, cant purchase it separately"?.

    I've searched the places I use for parts and cases etc but no adaptors - The only thing I can think of doing is to buy a magnetic charging cable and use that
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • When I use my iMac (os x 10.6.8) with iTunes (11.0.01) to sync my iPod and ipad the all of the selected viedos are installed on the iPod touch and only one or two are install on my iPad (model MD513LL/A)?

    When I use my iMac (os x 10.6.8) with iTunes (11.0.01) to sync my iPod and ipad all of the selected viedos are installed on the iPod touch and only one or two are install on my iPad (model MD513LL/A)?  With the same selections???

    Has no one seen this anomaly, all of the videos are mp4's mostlly frokm U-tube.?

  • Hii, i got an iTunes card for $15 and only used $6 in it, but it say I only have $0.37 left. If any one could help me with this, I will be forever grateful.

    Hii, i got an iTunes card for $15 and only used $6 in it, but it say I only have $0.37 left. If any one could help me with this, I will be forever grateful.

    You will need to Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

    Can iTunes be set to play only one song and then stop when the song is finished and not go on to play another unless commanded?

    If you uncheck all of the songs, they will only play if explicitly commanded. Command-click in a checkbox and they will all be unchecked. Command-clicking again will check the all again should you want to do that.

  • ITunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

    iTunes has stopped allowing me to import CDs. if I reboot it will import one, and only one. all was working fine before. the itunes diagnostics have all green lights

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • How do I make one (and only one) device use my Apple ID and iCloud account?

    How do I make one (and only one) device use my Apple ID and iCloud account? I currently have an iPad mini, iPhone 5, and MacBook pro attached to my apple accounts, but I want only my iPhone 5 to be assosiated with either one. Whenever I use any of the three devices, I get a notification on the other two telling me that these devices are now using these accounts from these services, etc. and I want these notifications to stop, along with the devices using to them. How do I do this? I completely reset the iPad mini so I don't know how I'm still getting notifications from it, and I deleted and signed of of all of my accounts everywhere I could find on my Mac. So, to restate exactly what I want to do, I want ONLY my iPhone 5 to use ANY of my Apple/iCloud accounts and ONLY it can receive emails, iMessages, and FaceTime calls. Thanks!

    If you want to disconect your Mac from iCloud, go to System Preferences>iCloud and click Sign Out.  If you only want to stop using iCloud email, just uncheck Mail.  To stop iMessage, open the Messages app, go to Messages>Preferences, click the Accounts tab, click your iCoud ID on the left-hand side, then to the right click Sign Out.  To stop FaceTime, open the FaceTime app, then click "Apple ID" then click Sign Out.
    On your iPad, go to Settings>iCloud and tap Delete Account (or if you only want to stop using iCloud email, turn Mail off).  For FaceTime, go to Settings>FaceTime, tap the ID and sign out.  For iMessage, go to Settings>Messages>Send & Receive, tap the ID and sign out.

  • I purchased a bundle of 5 movies and only one is showing up in my library. how do I access my other four (as well as other movies I have purchased but can't play on my computer?

    I purchased a bundle of 5 movies thru itunes and only one is on my library. how do I get the other 4?
    (I am not great with computers)

    Which OS version are you on?
    Which Mac - model/year?
    Did you download all 5 movies (depending on your connection, that could have taken quite some time)? Have you checked to see if they're available for download?

  • Is there a way to have two different iTunes for two different iPhones on one Windows User account?

    Using Windows 7, iphone 4.
    I've read as many threads on these forums and as many kb's as I could find, but I sttill can't figure it out. I have 2 iPhones. Let's call them, "wife" and "hubby". I want to have two separate iTunes, one for each of the phones. Hubby is the Windoows User. I don't want to set up a different Windows User for wife.
    Hubby was the original iPhone. When I plug it in, iTunes recognized it has Hubby's iPhone. Then I unplug Hubby and close iTunes. I plug in Wife but iTunes stll comes up with Hubby under Devices and syncs Hubby's iTunes to Wife's iphone.
    I've tried using the shift key when I open iTunes to set up two separate .itl files to no avail.
    Is there a way to have two different iTunes for two different iPhones on one Windows User account?
    Thanks!

    What happens if you rename the iPhone "Wife" when it shows up as "Hubby", then choose a different set of apps/playlists to sync with? iTunes is supposed to be able to manage multiple devices, each with their own selection of content. Perhaps you "restored" "Wife" with a backup from "Hubby" when you first set things up which is now causing confusion.
    To create a new library press and hold down the shift key as you click the icon to start iTunes and keep holding shift until asked to choose or create a library. You need to use the same technique to switch back.
    tt2

  • HP Laserjet CP1025nw Color Printer - printer prints two copies when only one is requested.

    pcwizard (HP) requested that I try Foxit Reader 5.1 to see if the printer will print properly.  I used the same previous document and printed it with Foxit Reader 5.1.  The printer printed two copies when only one was requested as it had done in the past.  We still have a problem.
    I am using Windows 7 (64 bit) for OS.  I have experience the issue on two different computers.
    dslledyrt
    This question was solved.
    View Solution.

    Hi dslledyrt,
    Can you install the Basic Driver for the printer on one of the computers, and let me know if you still have this issue?
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=lj-90357-1&cc=us&dlc=en&lc=en&...=
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • HT1689 I purchased two songs and each one, half of it is silent and cuts off. I want my money back or I'd like to re-download for free

    I purchased two songs and each one, half of it is silent and cuts off. I want my money back or I'd like to re-download for free

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

Maybe you are looking for

  • Crystal reports from VB at run time

    I am using VB6 as the front end and Microsoft Access to hold the data and Crystal Reports 8.5. I have a staff name parameter that I want the user to select which staff name to print the report.  If there is a new staff the name is not in the list of

  • How do I have a totalizer reset at the end of every month?

    We are using Lookout 5.1 in an application that is receiving a Modbus input giving us a totalizer value.  We need to have this value reset to zero at the end of every month.  Also want the monthly total to be sent to an excell spread sheet.  All help

  • How do I open a CC document in CS6?

    Thanks for any help.

  • Rollovers not working in CS3 - HELP!

    I imported a site into Dreamweaver, and on the pages I haven't touched the rollovers work fine.  On the pages I've made changes, the rollovers no longer work although the links work.  I tried replacing the head tag on the page with the disfunctional

  • How to retrieve column name from Excel using POI HSSF eventusermodel?

    Hi , I am simply reading the excel sheet and writing in a txt file. I have done the following in the switch construct. It works fine but I want to retrieve only the column header. But this code gives me all available strings in the excel sheet. Any p