Itunes on windows 8.1 does not recognise my iphone/nano or ipad. I have reinstalled a few times and nothing has worked?

I have updated my laptop to windows 8.1. My laptop now does not recognise my iphone, nano or ipad? I have uninstaled and reinstalled. I can downlaod pictures off my iphone but not connect to itunes?
Please help

iOS: Device not recognized in iTunes for Windows

Similar Messages

  • HT1386 windows media player does not recognise my ipod nano

    windows media player does not recognise my ipod nano

    irishjohn1 wrote:
    windows media player does not recognise my ipod nano
    Use iTunes.  It is designed to sync a Nano and other Apple devices.

  • My passcode was entered wrong too many times now i have a configue iphone screen and my laptop does not recognise my iphone ... do i have to reconfigure it?

    Please help i don't want to lose all my info and pics from the last week for the 4th time.

    If the computer does not recognize it and you've forgotten the passcode, there is no other option.
    If you've been using the device as designed and syncing regularly, only the data since the last backup will be lost.

  • Someone tell my why itunes is not uploading on my computer when i have reinstalled it many times and still doesnt work

    i have reinstalled itunes on my labtop 12 times and still gives me the same message that it wasnt installed correctly when i did it all correctly someone tell me why it isn't working propertly?

    Doublechecking, Jensen. What's the precise text of your error message, please? (There's a few different ones I can think of that you might be getting.)

  • Error while syncing can not be erased and have gone to all articles and nothing has worked. Have tried to erase my data in the sync file and that can not be done - it says try again another time. What now?

    Have gone into my snyc data file to erase all data - error says that it can not be done at this time. I still have the error while syncing on my bar. Have tried to get a new sync number and that will not change - it goes back to the original how can I start over and try again?

    This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Hi, recently my Photoshop had stopped working. Whenever I try to run it says that it has found and error and something about Microsoft Visual C   not working. I have done everything i could and nothing has worked thus far. I am working on a Windows 7 desk

    I have tried many other things and I cannot directly contact Adobe.
    Ignore the Dog photo.

    SOLUTION - Photoshop CS5 Runtime Error, R6025, runtime c++
    CS5 Design Premium Microsoft Visual C++ Runtime Error
    These are the forum topics that I used. It did include restoring preferences and running the Adobe CS5 cleaning program thing.
    I have uninstalled and reinstalled PS as well.
    What kind of CC cleaner tools do you recommend?

  • I restored my ipad today and i put in the passcode and now it is not letting me in and keeps disabling itself. i have reset it twice already and nothing has worked.

    i have been trying to unlock my ipad for over an hour.i restored it today and have been putting in the passcode and it won't let me in. the passcode is right.

    TRY FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. If you did not do step 4 properly, start all over again.

  • I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?

    I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
    Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
    I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
    I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
    I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
    Please can anybody help.
    Cheers,
    Dan_nz.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • Windows 7 does not recognise my iphone 5 usb device

    Itunes will does not recognise my Iphone 5 when I insert USB. I have tried all ports. It worked fine on my Iphone 3, but won't install driver on my Iphone 5

    It may have been blocked by some firewall or windows defender.
    Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up Blackberry Battery Saving Tips | Follow me on Twitter

  • My Windows 8 PC does not recognise my Ipod  Shuffle 3rd Generation - help please?

    My Windows 8 PC does not recognise my Ipod  Shuffle 3rd Generation - help please?

    Hi Susan,
    Welcome to Apple Support Communities!
    Take a look at the article below, it has a lot of great tips that should be able to help you get that iPod rezignized by iTunes.
    iPod not recognized in My Computer and in iTunes for Windows
    http://support.apple.com/kb/ts1369
    -Jason

  • I had to replace my Iphone 5c with a new one.  Now, my windows 7 pc does not recognize my iphone.  Reinstalled itunes.  Apple mobile device is running.  I did whatever I could find on the internet still no luck.  Any suggestions?  Thnx

    I had to replace my Iphone 5c with a new one.  Now, my windows 7 pc does not recognize my iphone.  Reinstalled itunes.  Apple mobile device is running.  I did whatever I could find on the internet still no luck.  Any suggestions?  Thnx

    You have done everything verbatim included with this link?
    http://support.apple.com/kb/ts1538

  • My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think.

    My windows 7 machine does not recognise .swf files. I have down loaded the flash player but I think but it is linked as a plug in with chrome and IE.  How can I get my windows to recognise the .swf files to play them.

    The downloaded file is the projector, not an installer; you need to make the file association manually:
    move the downloaded exe file to a location you can remember, e.g. C:\Windows\SysWOW64\Macromed\Flash
    right-click on a swf file and select Open with > Choose default program
    navigate to the folder you saved the player and select flashplayer_13_sa.exe

  • TS4062 hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes.... please is there something im missing...

    hi can somebody help me... itunes does not accept the iphone 4s but i already have the version 64 bit to work with windows 7 64 bit,  the computer recognizes the phone but itunes sais i need 64 bit itunes. please is there something im missing... thanks

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • 4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

    4s stuck in recovery mode. try to restore apple icon comes up but goes itno recovery again. Itunes does not recognise. I wa trying to update software from laptop to phone and errored 4005.

    Hi there Schusski,
    I would recommend taking a look at the troubleshooting steps for Error 4005 found in the article below. 
    iOS: Restore errors 4005, 4013, and 4014
    -Griff W. 

  • Windows 8.1 does not recognize my iphone.

    windows 8.1 does not recognize my iphone.

    Hi kathyt8952 ,
    Would you please share us more details of the issue ?
    Have you checked the driver issue from the device manager ?Have you tried to connect the device from another USB port to have a check ?
    We can take the following steps to have a check .
    1.Open "run" from the start menu, and run "services.msc".
    2.Search "Apple Mobile Device".
    3.On "status" column right click and then click on "Properties"
    4.In the "general" tab find the "startup type" drop-down arrow menu and make sure "automatic" is selected.
    5.Also in the general tab check the "service status". If it does not say "started" then click the start button.
    6.At the bottom of the properties window click "apply".
    If the issue persists, we can refer to the following link to have a troubleshoot :
    iPhone, iPad, or iPod not recognized in iTunes for Windows
    https://support.apple.com/en-us/HT204095
    We may also need to ask for help from the Apple Forum .They may have some good advices for you .
    NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Best regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Maybe you are looking for

  • Prs-t1 crashes

    Have had my prs-t1 a few weeks. I have no problems with it until I make a collection and add a book to it. It's updated to the latest version. What it will do when I make a collection and put a book in it: it will freeze during a swiped page turn whe

  • Shopping Cart Workflow - "Wait for change event" not firing?

    Hi there, I have a scenario where if I create a shopping cart above my spending limit it will go into the approver's inbox, that is fine. Now if I change the total value of the shopping cart to be within my spending limit the original workflow should

  • Changing the speed of the ethernet card

    Referring to this topic I posted earlier: http://discussions.apple.com/thread.jspa?threadID=568098&tstart=0 I called my ISP, and they could only think of one thing: that there is a conflict between my MacBook's fast ethernet card and my old DSL box (

  • Why is my RAM preview only playing the first 7 seconds of my video?

    When I try to RAM preview my animation so that I can hear audio it only displays the first 7 seconds and then repeats. The entire clip is 35 seconds long. Help please!

  • Elements 9 Color Space

    I am not too knowledgeable regarding color space but I am in the process of setting up a new Nikon D7000 and need to decide what color space to use.  I would prefer Adobe RGB. Does Adobe Photoshop Elements 9 support Exif 2.3 and DCF 2.0 and will it s