Itunes only burns 40 minutes on an 80min cd?

I'm having trouble getting Itunes to burn a full cd. I make a playlist that is 50-79 minutes long and the cd appears to burn correctly, i.e. no error messages, etc. cd says it's complete. I put it in my cd player and at the 40 minute mark, it just ends and goes back to track 1. I have never had this problems with any other cd in any player, only the ones burned using itunes with songs only purchased through the itunes store. anyone else having this problem? is there something i need to change the settings on? PLEASE REPLY! I've wasted far too many cd's to continue on like this. the interactive faq and troubleshooting has nothing on this.

iTunes tends to be more picky on windows than other programs that burn CDs on a PC. The 3 main fixes for any iTunes burning issues/problems are
1) Updating the CD burners firmware and the PCs chipsets, BIOS ect ect, basicly any updates/patches offered on the PC makers web site for your model.
2) Slowing the burn speed in iTunes by going to edit>preferences>advanced tab>burning sub tab. Usually slowing it from "Max" to a speed like 8x or 4x does the trick
3) Using a different brand of blank CDs. Not all blank CD's are make from the same material, and not all burners read them the same.
Another thing you can do is goto Help>run CD Diagnostic and copy/paste the whole resulting report here so we can see what error if any your getting and overlook your setup for anything wrong

Similar Messages

ITunes only burns the first two discs of audible book over and over

I have purchased, downloaded, and burned many Audible books in iTunes successfully . . . until now.
NOW I cannot get my current purchased book to burn correctly.
What I do...
I create a playlist for the audiobook.
I drag the audiobook into the playlist.
I right click on the playlist and ask it to burn to disc.
I am told the book will have to be spread across multiple discs.
I click "ok".
The playlist begins to burn to disc.
I am prompted to insert another disc.
I do so.
This goes on and on for what seems like too many discs (normally, an unabridged audio takes about 8-12 discs depending on the length.)
I check the discs in a portable player and discover that the first two discs are fine, but that the third and fourth discs are just repeats of the first two discs.
I check the rest of the discs I have burned (18 at this point) and find that the first two discs are repeated over and over and over again!
What I did to try and resolve the issue:
I checked to see if I had the latest iTunes downloaded. I do.
I emailed Audible and they had me delete all occurences of the audiobook from my system and then re-download a fresh copy. I did.
Tried to reburn the new playlist with the new downloaded audio book.
The same issue occurrs and I waste another 18 discs.
It should be noted that the only reason I only wasted these 18 discs each time and not more is because I finally cancelled the burn.
iTunes was still asking for more discs on disc 18 (and the audio book was only about 10 hours long).
Any help resolving this would be appreciated.
Thanks.

THIS... is precisely why I use Toast.
I know that doesn't help a lot, but I have NEVER been fond of iTunes for burning.

ITunes Only Burns First Few Tracks....

When trying to burn a CD on iTunes it will only burn the first few songs onto the CD.
I have tried different blank CD's and have no problem burning CD's when using Windows Media Player.
Any advice would be greatly appreciated!

iTunes tends to be more picky on windows than other programs that burn CDs on a PC. The 3 main fixes for any iTunes burning issues/problems are
1) Updating the CD burners firmware and the PCs chipsets, BIOS ect ect, basicly any updates/patches offered on the PC makers web site for your model.
2) Slowing the burn speed in iTunes by going to edit>preferences>advanced tab>burning sub tab. Usually slowing it from "Max" to a speed like 8x or 4x does the trick
3) Using a different brand of blank CDs. Not all blank CD's are make from the same material, and not all burners read them the same.
Another thing you can do is goto Help>run CD Diagnostic and copy/paste the whole resulting report here so we can see what error if any your getting and overlook your setup for anything wrong

ITunes Only Burns At 8X (Despite Being Set At 16X)

Hi, I recently noticed that whenever I burn a CD with iTunes now, it burns rather slowly even though I have it set to burn at 16x. iTunes doesn't show what speed it's actually burning at but I figured it must be burning at 8x since it now takes about twice the normal amount of time to burn a disc. For example, it just took me approx. 7 min. to burn a CD with 16 tracks (56 min.). I decided to burn the same playlist (with the same CD-R media) using Burrrn with the speed set at 8x and sure enough it took about the same time (7 min.), confirming my suspicion that iTunes is burning at 8x (despite being set to burn at 16x). What would be the cause of this? I've even tried to set it at different speeds like 12x, 24x, etc. but it still seems to burn at 8x. Thanks for any help.
Message was edited by: FirewalkerAHA

I also forgot to mention that whenever I burn with iTunes now a text file named GEAREXT.WOIDENT shows up on my desktop. This is what it reads (it's obviously information sent by iTunes to the burner):
Mastering information file to accompany premaster tapes and CD/DVD discs.
GEAR image building and premastering software, GEAR Software 2007.
Mastering order references (customer information):
- Customer name:
- Customer contact:
- Telephone number:
- Origination date: 12-7-2007
- Master ID code:
- Customer reference code:
- Disc title:
Disc image related information for mastering:
- Number of tracks: 14
- Recommended LEAD IN period for mastering: 180 seconds.
- Recommended LEAD OUT period for mastering: 210 seconds.
Track table for mastering:
TRACK INDEX CONTR NR OF TYPE PRESENT SECTOR START TIME DESCRIPTION
FIELD SECTORS ON DISC SIZE MIN SEC FRM
01 00 0000 150 CD-DA YES 2352 00 00 00 pause
01 01 0000 11059 CD-DA YES 2352 00 02 00 audio track
02 01 0000 36884 CD-DA YES 2352 02 29 34 audio track
03 01 0000 17706 CD-DA YES 2352 10 41 18 audio track
04 01 0000 8896 CD-DA YES 2352 14 37 24 audio track
05 01 0000 13178 CD-DA YES 2352 16 35 70 audio track
06 01 0000 11519 CD-DA YES 2352 19 31 48 audio track
07 01 0000 17162 CD-DA YES 2352 22 05 17 audio track
08 01 0000 30374 CD-DA YES 2352 25 54 04 audio track
09 01 0000 20834 CD-DA YES 2352 32 39 03 audio track
10 01 0000 25930 CD-DA YES 2352 37 16 62 audio track
11 01 0000 21576 CD-DA YES 2352 43 02 42 audio track
12 01 0000 8579 CD-DA YES 2352 47 50 18 audio track
13 01 0000 13302 CD-DA YES 2352 49 44 47 audio track
14 01 0000 20254 CD-DA YES 2352 52 41 74 audio track
aa 01 0000 15750 CD-DA YES 0 57 12 03 lead out
- Cue Sheet format sent to the recorder:
Contr/Addr Track Index Data-Mode ZERO MIN SEC FRAME
01 00 00 01 00 00 00 00
01 01 00 00 00 00 00 00
01 01 01 00 00 00 02 00
01 02 01 00 00 02 1d 22
01 03 01 00 00 0a 29 12
01 04 01 00 00 0e 25 18
01 05 01 00 00 10 23 46
01 06 01 00 00 13 1f 30
01 07 01 00 00 16 05 11
01 08 01 00 00 19 36 04
01 09 01 00 00 20 27 03
01 0a 01 00 00 25 10 3e
01 0b 01 00 00 2b 02 2a
01 0c 01 00 00 2f 32 12
01 0d 01 00 00 31 2c 2f
01 0e 01 00 00 34 29 4a
01 aa 01 01 00 39 0c 03

Burning error, can only burn 3 minutes of video on disk.

I have wasted 6 disks by now. The burning ends much earlier than normal, then got a message saying burning/? ( sorry can't remmber) error.
The disk still can be played but it contains only 2'50-3'00 of video. Tried other projects, same results.
I got this problem after burning a few photo CDs, does this matter?
Also from the very beginning of my experience with iDVD, I have been having a problem with audio encodeing, many times the programmes just stopped when encoding audio and I had to force quit. But next time it may go through without any trouble, I mean the same imovie project. Confused!
Many thanks.
iMac G5 Mac OS X (10.4.8)

(Thanks to Len "iDVD Guru" Goff for the copy & paste:)
Suggest you create a disc image and then burn the DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. If you hold your mouse cursor over the pop-up it says: "Select a slower speed to work around burn failures," so select 4x or slower for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
:)Sue

CDs will only burn 50 minutes

Even though CDs show successful burning, they quit playing properly at about the 50-52 minute mark when I play them in any CD player. This happened with my previous operating system, and now with 10.5.5 as well. It's not bad CDs -- this has been happening for some time. Any ideas?

If the burn speed is set to "Best" try x8
Best is always too fast

ITunes only burns sometimes

For a while I have had problems with iTunes. When I try to burn a disc I get the 4280 error, but it's not constant. I am currently trying to burn a 33 song album from itunes involving two discs. It has burned the first disc, but cancelled during the second. I have tried many different discs with no luck. Here's my diagnostics.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Inc. Dimension 9100
iTunes 6.0.4.2
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: NVIDIA GeForce 6800 \GeForce 6800
Found aspi32 running.
IDE\DiskST3160023AS____________________________8.12___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTSSTcorpCD-RW___TS-H292B_______________DE03___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomNEC_DVD+-RW_ND-3530A___________________102B___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: TSSTcorp CD-RW TS-H292B, Rev DE03
Drive is empty.
E: _NEC DVD+-RW ND-3530A, Rev 102B
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive D: TSSTcorp CD-RW TS-H292B on CDR media at speed 24X.
Dell Dimension 9100 Windows XP

Welcome to Apple Discussions!
Can you take a screenshot of the error?
hudgie: Windows: Taking screenshots
Also, are you always using the same cable and USB port?
In iTunes, try going to advanced-->deauthorize computer. Now play a purchase song, enter your Account info, and the computer should reauthorize. Now sync your iPod.
Finally, try the steps listed here...
Strange iPod behavior when Windows confuses iPod with network drive
btabz

I only get 52 minutes of play time from a CD that I downloaded from ITunes

The CD has a 60 minute run time but I only get 52 minutes on the CD-R that I burned from the downloaded CD.

Vincy28 wrote:
I purchases some karaoke songs from itunes store,
The tracks labeled "karaoke" in the iTunes Store are only instrumental backing tracks; they are not actual karaoke tracks. They do not have lyrics, and cannot be burned to the usual CD+G format that a karaoke machine will accept.
If you want actual karaoke tracks, go to a specialty online download store such as KaraokeDownloads.com.

ITUNES ONLY WORKS FOR 5 MINUTES AT A TIME

iTunes stopped working about a month ago, but then I fixed it using the msconfig solution. It worked for a while now I have the same problem, i can fix it, but then iTunes only works for about five minutes before closing. This is the only way I can fix it; first, by re-installing iTunes, then, doing the msconfig solution and restarting the computer. Then after about 5 minutes it closes. To open it again I have to go through the whole proccess. I cannot figure out how to permanently fix it.

Sounds like you have some malware that is interfering with iTunes.
What do you have to turn off in msconfig to get iTunes working?
It's pretty involved to remove it. If you have purchased security software like Norton or McAfee, I suggest contacting them for help.
Otherwise try this
http://mysite.verizon.net/dbjcgj/id1.html

Images burn into the screen after being there for only a few minutes?

What's wrong with my mac if images burn into the screen after being there for only a few minutes?
I can have an icon, like a folder or something, on my desktop for only a few minutes and then when I move it an image of it will be burned into the screen for another few minutes. Same thing happens with having a webpage open for a few minutes or word document. What part of my computer is malfunctioning and is Apple responsible for repairing it?

Hi,
Does it happen on all desktops applications as well as Modern UI Apps? Since this issue only happened recently, I suspect a newly-installed third party program causes this issue, please check these programs if possible.
We can also boot into clean boot mode, test the issue.
http://support.microsoft.com/KB/929135
Run a virus scan to eliminate some malware\virus
Similiar issue
https://social.technet.microsoft.com/Forums/en-US/125204a0-937e-4bc6-bb60-8fe3244b4514/all-windowsapplications-keep-minimizing-on-their-own-windows-81?forum=w8itprogeneral
Yolanda Zhu
TechNet Community Support

HT1918 Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD an

Can't burn music I purchased months ago, I could only burn the 4 cuts I bought this evening,6/9/12 message said originals cannot be found? Please help itunes would not let me buy a second time, thats a good thing but Im trying to make a music CD and itunes will not let me? The music is in my music file but will not let me burn them ! really I tried over and over, now Im just frustrated !
Please find the original's purchased, my name and email have not changed. Thanks for your time and consideration.
Jeannie
7024503288
[email protected]

Fixed. /Users/x/Library/Application Support/SIMBL/Plugins/AirKeysInputManager.bundle got corrupted by a badly installed safari extension. Deleting this, then reinstalling adobe air did the trick. I wasn't thorough enough on my first try, it was tricky to find everything associated. I had to look for files in the console log then search for them. Spotlight was missing some deep files, EasyFind worked better for me.

Itunes will burn only 1 CD without reboot

Itunes will burn only 1 CD, then won't recognize any other discs. Burn function for 2nd+ tries doesn't say "checking playlist" as it does normally, instead says "checking media", then just quits, takes me back to itunes. Only a reboot of the computer will help. Any ideas. This is a real pain.

Hello minibar,
Thank you for providing the details of the issue you are experiencing with burning a disc on your iMac. I found some resources that I think might help:
First, I recommend resetting the System Management Controller (SMC) on your Mac:
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
You can find the full article here:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
If you are still having trouble with burning after that step, I recommend reviewing the section titled "Top troubleshooting tips" in the following artice:
Disc Burning Quick Assist
http://support.apple.com/kb/HT1152
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

As we were instructed I attempted to download the new Adobe Cloud to replace Adobe CS6 as it is about to expire. It had been downloading for about an hour when I lost power due to a storm. It was only off 20 minutes. When it came back up it had stopped b

As we were instructed I attempted to download the new Adobe Cloud to replace Adobe CS6 as it is about to expire. It had been downloading for about an hour when I lost power due to a storm. It was only off 20 minutes. When it came back up it had stopped because my internet of course was also off. Now I have tried to do it again and it tells me “that number has already been approved and uploaded” However, it has not because I do not have the cloud programs yet. I still have my CS6 but I am not sure what to do from here. Can you assist with this please?

After admittedly only a quick read the one thing you don't say is how you are trying to make this move. Most people with moving library issues do it the wrong way. Plenty of web sites tell you how to do it the wrong way.
If the iTunes application is started before the drive with the library is fully mounted and awake iTunes will revert back to the internal drive.

Help please - iTunes disc burner or software not found... with full troubleshooting details

In iTunes 11.1.3.8 on my Windows 8 HP Laptop, when trying to "Burn Playlist to Disc", I get the Burn Settings window "E: hp DVD A DS8A9SH", then I select MP3 CD and click "Burn", I unfortunately get the dreaded iTunes "disc burner or software not found...". I think this is the second time this has happened (first time I think a simple reboot fixed it), and I assume because iTunes was updated this issue came back again and I cannot burn MP3 cds anymore because of it!
I've followed all steps outlined in this support article "iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install" (http://support.apple.com/kb/TS2308)
Solution 1, no updated firmware was available for dvd drive.
Solution 2, not relevant because those files were not present when I looked for them.
Solution 3, I'm familiar with regedit and did exactly what the step by step instructions told me including rebooting multiple times to completely remove Gear drivers/keys, installing the new Gear driver files with their official setup file "For 32-bit and 64-bit systems:" from http://www.gearsoftware.com/support/drivers.php (and gave another reboot just in case) and opened iTunes at the very end of the entire process.
Still getting the dreaded "disc burner or software not found..." error when trying to burn a playlist to a CD. The weird thing is when I click Burn playlist to a CD, I see the DVD drive "E: in the next prompt which asks for Data CD/MP3 CD, Audio CD.
So I clicked on Help > Run Diagnostics, selected "CD/DVD Drive tests" only and clicked "Next".
Window says "To begin the test, please insert a prerecorded audio cd..." so I did that and clicked "Next".
Under "Choose an optical drive to test:", the drop-down menu only shows "[Choose a Drive]", no other options. Under "Optical drive:" it says "No drive chosen for testing.", and I click the "Next" button.
Here are the diagnostics output I got:
Microsoft Windows 8 x64 Home Premium Edition (Build 9200)
Hewlett-Packard HP Pavilion g6 Notebook PC
iTunes 11.1.3.8
QuickTime not available
FairPlay 2.5.16
Apple Application Support 2.3.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.0.0.117
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 002AB1700B7C4780
Current user is not an administrator.
The current local date and time is 2014-01-20 18:23:52.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 11.1.3.8 (x64) is currently running.
iTunesHelper 11.1.3.8 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
I'm extremely confused as to what to do next. I was thinking I should try reinstalling iTunes but I'm not sure that would even work and I'm so paranoid about installing it correctly and referencing the right existing library files that I'd like to see other suggestions first.
Any help from the community or Apple would be tremendously appreciated and I would be glad to do more testing and provide more details. Thanks!

Hi there aaxim,
You may find the troubleshooting steps in the article below helpful.
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
-Griff W.

I rented a movie on my iPad. It downloaded fine but would only play 36 minutes, 5 seconds worth of the movie; although the time kept running for the length of the movie. Can this be fixed or do I need to get a refund?

I rented a movie on my iPad. It downloaded fine but would only play 36 minutes, 5 seconds worth of the movie; although the time kept running for the length of the movie. Can this be fixed or do I need to get a refund?

You can try a rest:
Reset iPad: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- If that does work, contact iTunes and request a redownload. You can ask for a refund though.

Itunes only burns 40 minutes on an 80min cd?

Similar Messages

Maybe you are looking for