ITunes Opens on Any/All USB Connections
Basically, the title says it all: Lately, iTunes has taken to opening whenever any new USB device (camera, ext. HD, scanner, etc.) is connected up. It simply appears and starts the routine downloading of podcasts, etc. I will usually just close it and occasionally, infrequently, it will re-appear when that device is unplugged.
It continues to work as it should with iPods. I can't tie this to any specific systems change, although it never did happen before upgrading to 10.4.11. It has persisted through several system logouts, restarts, etc.
I was unable to find anything in any Pref settings that could cause this. As long as nothing else is going on, this seems sort of benign but, nevertheless, would like to get rid of it. I'd appreciate any thoughts that anyone might have on it.
Great news Micheal, thanks!
Here's the jist of the file...
bplist00×_#com.apple.digihub.blank.cd.appeared_#com.apple.digihub.cd.music.appea red_$com.apple.digihub.blank.dvd.appeared_%com.apple.digihub.cd.picture.appeared _(com.apple.digihub.dvcamera.IIDC.appeared_*com.apple.digihub.dvcamera.IIDC.iris opened_$com.apple.digihub.dvd.video.appearedÒ VactionXotherappdÒ __CFURLStringType\_CFURLString_ffile://localhost/Volumes/Toast%20with%20Jam%206/Roxio%20Toast%206%20Titanium/Toa st%206%20Titanium.app/Ñ Ò Ò Ò Ò _6/Applications/GraphicConverter US/GraphicConverter.appÑ Ñ Ñ i=cŠ²Ý 16=FHM`moØÛÝâäéîóõ.1479
Similar Messages
-
i am living in china and after installation of the new iOS the appstore and iTunes open in chinese. all language settings are in german. whar can i do?
If it still shows the icon, Settings, then General, (sixth one down), then international, (third one up from the bottom), then, at the top, has where you can select what language, I think English is at the top of the list. I hope I can help!
-
Itunes crashes when any device is connected
Been having this problem for weeks now and just can't seem to find any solution.
Basically I upgraded to the newest version of itunes (the one before the most recent)and ever since then If I connect any device to my itunes, be it my iPhone 3G,iPhone 4 or my 5th Gen iPod, itunes crashes immediatly and I get the windows error message "Itunes has stopped working - A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available"
Now it's not a problem with any of my devices, because i've tried with friends ipods and it does the same thing. I've literally tried everyone, uninstalled and reinstalled, set itunes to not automatically sync devices,deauthorised and authorised my account,tried older version of itunes and done a system restore of my whole laptop.
It's driving me crazy, havent been able to sync anything for weeks now and it's majorly ******* me off! So can anyone help?Right sometimes when the error message comes up, windows gives me these details.
Apparently the error stems from these 3 files
Files that help describe the problem:
C:\Users\Me\AppData\Local\Temp\WERA449.tmp.version.txt
C:\Users\Me\AppData\Local\Temp\WERB05B.tmp.appcompat.txt
C:\Users\Me\AppData\Local\Temp\WERD96F.tmp.mdmp
Does that shed any light on the problem? -
I was on my IPhone today and it randomly froze up. The in requested a factory reset. I back up my phone all the time but now that I go to ITUNES its indicating my phone can not be located and I have lost everything! What can I do to retreive this information back. Mainly my contacts (very important information in there).
PLEASE HELP!If the information wasn't backed up (as it should have been) then there's no way to recover it. When a phone is in recovery mode like yours is, all data are gone.
-
I just bought an ipad 2. When I turn it on the screen has a picture of the usb charger and the itunes logo. Any ideas?
tc777 wrote:
I just bought an ipad 2. When I turn it on the screen has a picture of the usb charger and the itunes logo. Any ideas?
Connect the iPad to iTunes on your Computer...
See Here for Getting Started...
http://www.apple.com/support/ipad/
And Here...
iPad User Guide iOS 5
http://manuals.info.apple.com/en_US/ipad_user_guide.pdf -
ITunes opens when iPod connected
Why does iTunes open if my iPod is connected? I've unchecked this preference for this iPod in iTunes.
If I quit iTunes and the iPod is still connected, it mounts on the desktop and iTunes opens and updates the iPod again. Very annoying!
Thanks for the help.Just to update my question: iTunes opens after I quit it even if my iPod is not connected.
So I guess my topic doesn't belong in this forum. It seems the problem is with iTunes. Or something I installed. LastFM plug-in? -
Error when reopen USB connection without physical unplugging USB connection
Using Labview 8.5 to communicate with an USB device based on AT91SAM7S64 controller.
I has written a labview application that talks to several units and it works good as long as i dont close the USB connection
I wants the application to start talking to all USB devices that are already connected, at the moment i must reconnect all USB connection every time I start the Vi.
If a try to reopen a closed USB connection I got an timeout error when I read data from the device
to illustrate the problem I made a dummy test program. (Added as Attachment as jpg and vi)
Senario 1:
If i plug the USB connector into the computer and start the vi the first sequence works fine.
The second sequence fails.
Senario 2:
If i plug the USB connector into the computer and start the vi the first sequence works fine.
If i unplug and plug the USB connector between teh two sequences both works fine
Senario 3
If I remove the VISA close from the first sequence.
If i plug the USB connector into the computer and start the vi the first sequence works fine.
both sequences works fine without needing to unplug the USB connector.
Questions?
Does the VISA close command send a message to the USB device? can this be the reason for the need to replug the connection?
Does it exist a method to reopen a USB connection that has been closed?
All help is good help :-)
Attachments:
USB_error_example.jpg 101 KB
USB_error_Example.vi 30 KBHi Again,
I have tried to recreate the issue when using multiple runs of the same program but this time I have been unable to. Mine does manage to find the device again.
I have had a word with a few people and they have proposed a solution that would involve writing the references to the registry or a configuration file. They suggest:
First Run: The program will look to the registery/file to try and find the references. It wont find any so it will open the VISA references and write them to the registry. This should not close the references at the end of execution.
Run n : The program will look to the registry/file and find the references and use these for VISA operations.
First Run after Reboot: The program will look to the registry/file and find the references but will find that they are invalid so it will open new references and write these to registry for subsequent runs.
Functions for writing to the registry are under connectivity>>windows registry access VIs and have all the usual LabVIEW help files associated with them.
I hope this helps! let me know how it goes.
Message Edited by James McN on 08-07-2008 02:10 PM
James Mc
========
CLA and cRIO Fanatic
wiresmithtech.com/blog -
I am getting a 3014 error message when trying to recover my iTouch after upgrading to 10.7.0.21. Everything worked fine until the upgrade.My PC is current with upgrades, I have unplugged all USB connections and I have disabled my firewall security.
Did you try this:
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.
Also see:
HT4061 error message 3014.: Apple Support Communities -
Issues about USB connection on MBA2013(mid)
Hello.
I have an problem with my MBA 2013(mid).
I purchased MBA for DJing but really disappointed with this.
My set up is ...
Traktor Scratch Pro 2.6.3
NI Audio 8 DJ with the latest firmware (2.6.0 fixed issues with kernel panic on MBA 2013 and support mavericks)
Denon CDJ SC2900 and SC3900
DJM 800
2 CDJs and Audio8DJ connected to MBA on USB port.
CDJs have its own power and Audio8DJ uses only USB bus power.
Everything is fine with this setup. Timecode signal is steady and has no latency.
But after I start mixing, suddenly all usb connection goes out randomly.
Sometimes it took 5min, sometimes 30min.
No MIDI signal, No Sound output
MBA's console show me messages ...
2013. 11. 2. 오전 2:09:59.000 kernel[0]: USBF: 3423.591 AppleUSBXHCI::PollEventRing2 (bottom) - HSE bit set - USBSTS: 0x00000005
2013. 11. 2. 오전 2:09:59.000 kernel[0]: vtd[0] fault: device 0:20:0 reason 0x6 R:0x480000
I have researched every forums (NI, Apple) but couldn't find any solution yet.
But there was so many posts about issue about USB3.0 on new MBA.
Plz let me know if you have a solutionAdd Logs
2013. 11. 2. 오전 11:30:43.000 kernel[0]: de_caiaq_driver_NIUSBAudioEngine(0xffffff808b010000): unable to submit irp for writing (0xe00002ef (UNDEFINED))
2013. 11. 2. 오전 11:30:43.000 kernel[0]: USBF: 694.754 AppleUSBXHCI::PollEventRing2 (bottom) - HSE bit set - USBSTS: 0x00000005
2013. 11. 2. 오전 11:30:43.000 kernel[0]: vtd[0] fault: device 0:20:0 reason 0x6 R:0x480000 -
All I get when I turn iPod on is the USB connection to iTunes image. Then the system tells me that I have to restore the iPod. When I go through that process it says it cannot be restores because the device cannot be located. What do I do??
- Reboot the computer
- Try another cable and USB port
- Try placing the iPiod in DFU mode and then restoring
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
I am connecting my iPhone 5 to my Windows computer via USB. This should open iTunes and start the sync process. Instead of iTunes opening, I get the iTunes service agreement to which I must agree. Then iTunes opens and begins to back up my phone. It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected. Hence the computer and the phone are not sharing information. When I select the functions I want to sync, I must either replace or merge. If I replace, I lose the information I recently put into my phone. If I choose to merge, then I have duplicates of everything.
How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
Thanks for any help!
ChristineAfter you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
I've found that this fails with the error;
INFO: This tool works only on Windows Platform. Exiting the program
Which is strange considering this is Windows Server 2008 R2 64-bit
DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue -
My iPod dispalys this message:
"Connect to a computer. Use iTunes to restore." When I connect to a computer, iTunes doesn't recognise it. The iPod 5th Gen does not work at all. How do I fix my iPod without losing any data?
I have seen the Apple webpage suggesting the "five R's" (including restore). Before doing anything, I want to be sure that restoring or any other action is not going to delete or risk my data.
I would be very grateful if anyone can suggest a fix for this problem, in a way that will not risk my data.
Thanks in advance!Did you try a hard reset with the iPod still connected to your PC? Have you tried multiple USB ports, preferably high powered USB 2.0 ports?
To do a hard reset, first make sure the hold switch is in the Off position, then press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
Have you also worked through each and every single troubleshooting suggestion in this Apple support document?
iPod not recognized in 'My Computer' and in iTunes for Windows
B-rock -
I initially installed Itunes on my old Toshiba computer and had no difficulty with connectivity,etc. Now trying to utilize Ipod Touch on Samsung with Windows 7 (which by the way I do not like at all). Needless to say I installed the latest version of Itunes on the Samsung and am using the USB cable supplied with the Touch. I have had major difficulty with getting Itunes to recognize the Touch initially. Now Itunes will recognize the Touch but if I go to ITunes/Store or leave the Touch in any way the connectivity is lost. I have run the diagnostics several times to no avail. The diagnostics evidentially is for older version of I tunes as it describe the device as being located in the LEFT side of the screen (as in the old version). The version I am using shows the device in the UPPER RIGHT of the Menu bar with a tab on the RIGHT side of the ITunes menu (is this clear?)
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar.
-
Please help me how can i make my app store because when i open it it says cannot connect to iTunes please if you have any helpful solution inform me
Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset
Message was edited by: Diavonex -
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy
Maybe you are looking for
-
Hi, I'm a new mac user and firstly, let me just say that I'm really happy with my purchase (original Macbook). I've used PCs since 1996 and I don't know why I have waited this long. I have a linksys WRT54G on one side of the room, and a printer that'
-
Apply cumulative row value captured within transaction (for DWH incremental update)?
Dear community, Don't know how to properly name it (applying cumulative row value, or merged row value, or something else) but consider the following scenario for Oracle to Oracle replication. I have a table on the source system create table tab( i
-
Barocde printing in a basic report.
Experts, Can I print bar-code in a basic report. When i take a print out of the basic report the print out should come with bar-code. Is this possible? Suggestions will be rewarded with points. Cheers.
-
Hi, I just received my new GS70 Stealth and, while I love everything about it, I can't help but notice that the screen is very grainy or dirty. I know this is the nature of most matte screens but I would like to make sure if it's normal in the MSI GS
-
When I try to send an e mail to my wife from my iPhone 4SI get the following: A copy has been placed in your Outbox. The sender "my email address" was rejected by the server. I can send e mail to others in my Contacts. How can I fix this??