ITunes opens with volume turned down

For the past couple days everytime i open up iTunes it gives me a popup that the volume in itunes is turned all the ways down. i usually never touch the volume in itunes, rather the system volume, so i dont know why it "mutes" itself...

I can't help, but I noticed the same thing.... and by the way, I'm on a Mac
Message was edited by: multispacy

Similar Messages

Itunes opens with error -50

Itunes opens with error -50 on my Mac. Once open signing in causes error 5002. Signing in from App store just fails. My Mac pc does not appear to be registered anymore and I can't sign in. On screen Support buttons don't connect so can't contact support online. Tried all the work arounds in discussions but no joy. Even tried deleting itunes to start agin but you can do that apparently. For one work around I Signed in through Safari to change payment details but payment option was not displayed. Getting really p'd off. All is ok on my iphone/ipad etc but not my main pc. Any printable suggestions appreciated.

Found a fix that worked, didnt even need to refresh the network settings
Click the Finder icon in the Dock.
Choose Go to Folder from the Go menu.
Type: /Library/Preferences/SystemConfiguration
Click Go.
In the Finder window, locate the file named "NetworkInterfaces.plist" and drag this file to the Trash.
Restart your computer.
Once your computer has restarted, you will not be able to connect to the Internet. You will need to refresh your network settings to be able to connect again:
Choose System Preferences from the Apple () menu.
Choose Network from the View menu.
If you're using Mac OS X v10.4, choose New Location from the Locations menu.
Click Apply Now at the bottom right.
If your network connection requires any special settings, you will need to put them back in at this point. You would have received these from your ISP or network administrator.

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't w

I hate the new operating system. Can't connect to wifi in home anymore even after a restore. Rhapsody no longer works on my phone either. Plus the brighth graphics are bothering my eyes even with brightness turned down. Any ideas on why rhapsody doesn't why rhapsody doesn't work anymore?

Contact Rhapsody to see if they have or plan to release an update for the app. Try uninstalling and reinstalling the app. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears?

With volume turned up to full on my iPhone 3GS, I can hardly hear person phoning me

With volume turned up to full on my iPhone 3GS, I can hardly hear person

see if this link helps http://support.apple.com/kb/TS2802

IPad volume turning down itself

iPad volume turning down itself constantly,sometimes it is even hard to mannually put it back up. tried reboot, doesn't work. My iPad repair expired. Any solution?
Thanks!

There might be dirt under the rocker switch for the volume control. There are schematics online for the iPad that will show you how to take it apart if needed. Or you could use a fine toothbrush to try and clean under it.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

My iphone volume turns down randomly own its own. It will turn up on the buttons, but will turn back down by itself and i have to fight the volume to keep it from muting. Plus, the mute logo stays on the screen when it mutes itself. Please help.

Unfortunately this is probably a hardware issue and you will need to take it to an Apple Store.

Opens with volume all the way down

WHenever iTunes opens under my profile, whether it is a computer restart, log out/log in, or program (iTunes) restart, I always receive the warning that 'The iTunes volume is turned all the way down. To change the volume drag the slider at the top of the iTunes window" I am able to check the 'Do not warn me again' option, but I don't because I want to know why the volume is turned all the way down in the first place.

Here's the answer supplied by Johnny Hands. He's referring to the AirPlay control located next to the volume slider. Make sure your computer volume is turned up or the check mark is disabled on the Multiple tab.
https://discussions.apple.com/message/23357319#23357319.

Every time i turn on my iMac my iTunes opens with a window asking me to sign in with my password , how can i stop this ?

Every time I turn on my Imac my itunes opens as I have set up to but a window pops up asking me to sign in with my itunes password , is there a way to stop this as it's quite annoying .
Many Thanks
A

Correction: this is for automatic logon of the iMac itself.
In SystemPreferences/Users&Groups login items tab:
remove the line
iTunes with the minus sign at the bottom.
then also iTunes Match if you have it.

Creative Audigy 2 and Windows Vista: Sound volume turns down when I try to turn it

I have a strange problem with my audio in Vista. I have a Creative Audigy 2 and Creative 6700 speakers. My full system specification is below but please note I did not have this issue in my previous Vista build - its only happening since I did a reinstall. Anyway, when I swich on the speakers using the remote control unit for the 6700 speakers the sound comes on but then it turns down. I have to then increase the volume by a large amount for it to start playing sound again and then turn it down to listening volume. This issue is not application specific - it happens in everything: Winamp, WMP, games, etc etc?I'm using [color="#000000"]Creative Sound Blaster Audigy series Vista Driver 2.2.0002 and I've tried reinstall several times. I've tried doing diagnostic startup etc using msconfig in case something was conflicting and its still happening.
Has anyone got any ideas whats going on?Many thanks for your help!?System specifications:?MSI K8N SLI (MS-785 v..0) nForce4 Rev. A3
BIOS Phoenix Technologies 6.00PG
AMD FX-60 with Thermalright Ultra-20 Heatsink &?Scythe?20mm fan
Bus speed: 20MHz, Multiplier: x.0, Core Speed: 22 MHz
Corsair 2Gb: 2x Gb PC3200 RAM 28 bit dual channel mode & T command rate (2.5-3-3-8) with Thermaltake heatsinks
XFX 8800 GTS 640Mb XXX Edition
Hauppauge Nova T-500 dual tuner digital TV card
Seagate Barracuda 7200.9 500Gb
Optiarc AD-770S SATA DVD Writer
Xclio X2S4P4 750WModular SLi U-Quiet PSU
Lian Li PC-A0A aluminum case
Dell E228WFP (Two in dual display)
Microsoft Wireless Laser Mouse 8000
Microsoft Digital Media Pro keyboard
Windows Vista Ultimate 32bit Edition?Message Edited by DistortedVision on 05-25-200706:4 PM

Have you checked the volume button? It might be physically stuck. To determine whether a hardware repair is needed, you need to follow these steps:
1. Try doing a hard reset:
Press and hold both the Home button and the Sleep/wake button simultaneously for about 15 seconds and release when the Apple logo appears.
After that: test the device to see whether the issue is solved.
2. If the issue is not solved, you should backup the device and restore it as new.
In that case, use: http://support.apple.com/kb/HT4137
NB: set up as a NEW device because a software issue will be in the backup.
If the issue persists after restoring as new, you should offer the device for service.
If you get specific error messages/codes in iTunes when updating/restoring, check this: http://support.apple.com/kb/ts3694 for causes and solutions
Good luck
Stijn

Podcasts volume turned down...

I've uploaded several podcasts- they download fine to iTunes and appear to work- but when you try to watch/listen to them on the .mac page, the volume in the quicktime controls is turned all the way down. I spent a lot of time playing with my speakers before I realized that the volume control ON THE QT controls was there and it was turned all the way down. Turn it up, and all is well. Why would all of our podcasts be turned down? Is the a setting in iweb/.mac to turn them up globally? thanks
http://web.mac.com/beachschool/BeachSchool/Human_Body_PSA/Human_BodyPSA.html

Stephanie Griffin wrote:
I realized that the volume control ON THE QT controls was there and it was turned all the way down.
When you add the video to your podcast page (in iweb), you see the same controller bar with the little speaker on the left (it's QT volume control); you can set the volume there too.

ITunes opens with delay

Hi,
Well here's my problem, that i've had since the beginning using iTunes:
The program opens with delay, ranging from 30 seconds up to 10 minutes, sometimes even more. Sometimes, it will just not open at all...
I have tried to reinstall iTunes, I have tried to open it after having shut down all my antivirus or adaware type programs, but it won't help.
Does anyone have a solution for me? Pleeeeaaase.. I'm just not too good at sitting patiently in front of my screen, waiting that a program will feel fine enough to get going.. Thanx for reading me

Sysinternals has some excellent freeware to find out more of what's going on with your PC. It's pretty involved - not for the casual PC user.
system info
http://www.sysinternals.com/SystemInformationUtilities.html
CPUMon
processes and threads
http://www.sysinternals.com/ProcessesAndThreadsUtilities.html
PMon and FileMon

TS2776 iPhone 5, Outlook 2013, Windows 7.0 64-bit. Every time I connect my phone to my computer via USB, iTunes opens with the "accept our terms and service" then deselects the boxes checked under the INFO tab to sync my calendars, contacts...help?

I am connecting my iPhone 5 to my Windows computer via USB. This should open iTunes and start the sync process. Instead of iTunes opening, I get the iTunes service agreement to which I must agree. Then iTunes opens and begins to back up my phone. It is syncing my photos and music (although the music thing is another nightmare), but under the "info" tab in iTunes, the boxes of which functions I want to sync are no longer selected. Hence the computer and the phone are not sharing information. When I select the functions I want to sync, I must either replace or merge. If I replace, I lose the information I recently put into my phone. If I choose to merge, then I have duplicates of everything.
How can I resolve this problem? Why is iTunes acting like it doesn't know my phone?
I'm using an iPhone 5 iOS 6.1.4, Windows 7 64-bit, Outlook 13, and the must current version of iTunes (because I've removed and reinstalled it twice already).
Thanks for any help!
Christine

After you'd run the Configure Classic instance did you run in the statement as stated in 'Oracle® Fusion Middleware Installation Guide for Oracle Portal, Forms, Reports and Discoverer 11g Release 1 (11.1.1) Part Number E10421-05'?
java -classpath ORACLE_HOME_DIR\discoverer\lib\disco-config.jar;ORACLE_HOME_DIR\oui\jlib\OraInstaller.jar;ORACLE_HOME_DIR\opmn\lib\iasprovision.jar -Djava.library.path=ORACLE_HOME_DIR\oui\lib\win32 oracle.disco.install.config.DiscoUtil -oraclehome ORACLE_HOME_DIR -tnsadmin TNS_ADMIN_DIR
I've completed an installation with the same steps (although I ran the config.bat file in as_1/bin rather than from the program files list and also I've the jrockit jdk installed)
I've found that this fails with the error;
INFO: This tool works only on Windows Platform. Exiting the program
Which is strange considering this is Windows Server 2008 R2 64-bit
DISCO is running in the EM console but the URLs (as defined in the installation summary report) do not resolve properly. I was just interested to hear if you're installation was the same, this isn't the first installation I've done, they've all had a similar issue

ITunes opens with "Welcome to iTunes"

I've had my iPhone since August and all of a sudden last week iTunes started opening with "Welcome to iTunes" and a blank slate when I connect my iPhone. I figured out that I can manually start iTunes and sync my iphone with my correct files, but I am wondering how to fix the problem to get it working properly when I connect my phone.... anyone else have this problem or any ideas how to fix it?

Help, anyone else have this problem???

Itunes opens with library and purchased music missing

About every two weeks to a month I open itunes and it says it is copying library. It says the library is corrupt and itunes opens completely empty. No record of any songs play list or purchase history. I have about 11 files in my itunes folder marked itunes library (damaged). All my music is still in my itunes folder and I can drag and drop them back into itunes manually (hours of time), or use a 3rd party program to copy from ipod 5th generation, but sometimes even the next day itunes loses all knowledge of itself. This started about the time i upgraded to 6 and continues to get worse, I have 7.1.1 now.

If you had the hard drive from the original machine, a backup of the same, an iPod with the media, or a subscription to iTunes Match then there would have been hope, but alas no.
For the future see Backup your iTunes for Windows library with SyncToy.
tt2

Itunes opens with Just Text but no grapic interface

I open Itunes and it opens with No GUI jus tthe text .. song names and the text menu bar but no grpahical interface.. its like it is invisable... any ideas please le tme know if you need more info
Its a Dell xps 400 and 1g memory ati 128M x300 video card
Windows XP Pro

ok reinstalled directx no change here is the dxdiag error code results
Error: Problem getting extra display info, result code= 0x80004005 (generic failure)
error: problem getting directshow info, result code = 0x80040154 (class not registered)
Notes under DirectX Files tab
-Several files (ddraw.dll, ddrawex.dll, devenum.dll) are missing
-you should reinstall directX to get the latest version
Display tab Notes
-Problems were found in the system registry
-you should reinstall directX to get hte latest version
-direct3D functionally not available. YOu should verify that the driver is a final version from the hardware manufacturer
with a "transparent" itunes like that on an XP box, i
start checking on an out-of-date (or broken)
DirectX.
is your DirectX up to date? here's the Microsoft
download site:
Microsoft DirectX
if your DirectX is up to date (or updating it did not
help), let's try running your dxdiag troubleshooter.
go "Start > Run", type dxdiag and hit enter.
does dxdiag report any problems? if so, what does it
say? (include any error message numbers if it's
returning any.)

ITunes opens with volume turned down

Similar Messages

Maybe you are looking for