ITunes Play Icons Aren't Displaying the Correct Information.

I purchased the complete Breaking Bad set on the iTunes Store (very good show!). I haven't dowloaded it, what with there being over 250gb of the it, so have been streaming each episode from the cloud on either my iPad or my Macbook depending on the occation. Anyhow, despite me only having watched select episodes on iTunes, the whole lot have been marked with the half blue dot, implying each one has been part viewed. On my iPad, these icons appear to be correct, with those unviewed episodes shown to have a full dot, the viewed ones have nothing and the part viewed with the half dot. As I say this is not the case with my Macbook's iTunes. The artwork also has a banner telling me I have 3 unwatched episodes. I have tried resetting the views in the context menu but this have no effect. As I will shortly be embarking on viewing the whole lot, it would be helpful if I knew which ones I have and haven't seen. Any ideas?

You are awesome Roger. Strangest thing.. As soon as I posted in here about it, after I received your reply, I went to go look again, and you are correct, searching for Geekly Podcast yields no results, but searching Shawn Kirkbride does. HOWEVER, NOW, the podcast is showing the image properly. But you still cannot get to my Podcast by it's name...
https://itunes.apple.com/us/podcast/the-geekly-podcast/id926328668?mt=2https://itunes.apple.com/us/podcast/the-geekly-podcast/id926328668?mt=2

Similar Messages

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

I have just updated to ISO 8 and my app icons are not displaying the correct icon but just a generic icon. Anyone had a similar problem?

That happened to me for a short period of time after I updated. It didn't do it with all apps, but it did it with a few here and there. Try a few basic standard troubleshooting steps. Close all apps and reset the iPad.
In order to close apps, you have to drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
You can also try resetting all settings. You will not lose any data, but most of the device settings will have to be entered in the settings app again. Settings>General>Reset>Reset all Settings.
Hopefully it will be something simple, but don't rule out restoring the iOS software, if nothing else works, but start with this easy stuff first.

Firefox is not displaying the correct font color on my blog, but other browsers are.

I have a web designer issue. Firefox is not displaying the correct font color on the header in my blog. Explorer, Chrome, and Safari have no problems. The page is in css but this particular section has html code o designate color. The code is as follows:
<font face="helvetica" color="FF9966" size="1">blog</font>
Though all other browsers display the light orange color designated, Firefox displays white. Strangely, if if retype the code by spelling out a color, Firefox displays it correctly. i.e.
<font face="helvetica" color="black" size="1">blog</font>
... will give me black. You can see the effect by viewing the link below and looking at the word "blog" in the header, which should be light orange but is not in Firefox.

Actually it also seems to work in the current Firefox 4 beta as it is.
The code is not right though - the correct syntax for the color attribute with hex values is with a # at the start, so:
color="#FF9966"
It might work in Firefox 3.x if you change that.

My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
B-rock

HT1849 when I download album works from itunes it does not associate with the correct artist

when I download album works from itunes it does not associate with the correct artist

Where are you looking to download them from ? You might be able to redownload them via the Purchased link under Quicklinks on the right-hand side of the iTunes store homepage on your Mac's iTunes. If that album shows there but doesn't have the cloud symbol against it for redownloading then that implies that it's still in your iTunes library

How do I display the correct value when using SELECT_LIST_FROM_QUERY

I have an updatable report that displays the possible values for a field.
I'm using HTMLDB_ITEM.SELECT_LIST_FROM_QUERY, so obviously I have to process the record manually.
However, I need the trick to display the correct value as selected before processing the records.
I appreciate your help.
Thanks
Juan

Thank you.
So, I just need to put the field name in the second argument.
I have it working now.
Thanks again
Juan

How to configure the ST03N and ST06 for displaying the correct data?

Hello guys,
I have just finished a internal project installation following the installation guide.
Our R/3 System can run correctly. However, when I type st03n, it displays some strange data instead of the real server information. and also in st06, I cannot get the real OS information.
The OS collector said that saposcol is not running because of no process id found.
But in the OS level, I've checked the server and saposcol -s said that the saposcol is running correctly.
I searched some notes and modify the processor of the SAPOSCOl service, too. But nothing changes.
I think the ST06 issue is the root cause of the ST03N.
I just wonder that how I could configure the system to make the ST03N or the ST06 display the correct statistics?
Thanks in advance.

I got the answer myself.
I didn't know there were some standard jobs that are required to scheduled for a live R/3 System.
In SM36, find the standard jobs and input 'bc' in sap components and select the jobs scheduling job and set it as periodly run jobs(hourly).
then release the schedule.
And note 16083 has all the information.

Design Window is not displaying the correct view

Hi
For some reason the Design View on my CS3 is not displaying
the correct view.
It used to show how the web page would look but it is simply
showing up the wording and pictures surrounded by dotted black
lines.
I am using a template as a bases for all the pages and all
the pages are showing like this.
My other sites are showing up OK though.
When I Preview in Browser, it all shows up OK.
Can anyone help?
Bezz

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Bezz333" <[email protected]> wrote in
message
news:fttdsr$394$[email protected]..
> Hi
>
> For some reason the Design View on my CS3 is not
displaying the correct
> view.
>
> It used to show how the web page would look but it is
simply showing up
> the
> wording and pictures surrounded by dotted black lines.
>
> I am using a template as a bases for all the pages and
all the pages are
> showing like this.
>
> My other sites are showing up OK though.
>
> When I Preview in Browser, it all shows up OK.
>
> Can anyone help?
>
> Bezz
>

HT2480 My e-mail, exchange account, on iphone, displays an out of date signature. My Outlook displays the correct signature but this does not appear to have replicated to my iphone.

My e-mail, exchange account, on iphone, displays an out of date signature. My Outlook displays the correct signature but this does not appear to have replicated to my iphone. The standard signature still says "sent from my iphone" which is fine but I need desperately to change the exchange signature as the office address is incorrect.

I have already tried that and this doesn't work. The signature is pulling incorrectly from exchange but I don't know how.

Edge icon no longer displaying the "E"

After updating to 1.1.2, the Edge icon ceases to display the white, embedded "E".
FYI

ElegantMac,
Not exactly. The icon is documented in the updated User's Guide (Manual) which can be downloaded from:
http://www.apple.com/support/manuals/
The icon indicates GPRS.
However, a little explanation. Almost every GSM tower supports an older technology for data access called GPRS. In the U.S. nearly all AT&T towers have been updated to EDGE which is speed increase to GPRS. However, GPRS can sometimes be picked up at lower signal strengths than EDGE, and some partner networks may only offer GPRS. In the UK O2 was estimating about 30% of their towers would be upgraded to EDGE by the time the iPhone came out.
Some features like Youtube may not be available on GPRS.
Hope this helps,
Nathan C.

Regarding displaying the report information in Geographical map

Hi All,.
I have a specific requirement where I have to display the number of Telephone connections activated in a geographical area (GEO map) . How to do it.
Can any body provide the step by step process to display the reporting information in maps.

Hi,
To do this you have to have the settings done in Info object maintenance where in the Map should have been integrated already.
Once that is done, in BEx designer you can have the setting by cloicking the icon.
Hope this helps to start with.
Assign points if useful.
Regards,
Venkat

I have problem with the app purchase. I put the correct information credit card but the system said that is incorrect

I have problem with the app purchase. I put the correct information credit card but the system said that is incorrect

Use this for help from iTunes https://expresslane.apple.com/GetproductgroupList.action. This is where you need to get assistance.

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

TS3988 The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

I've just updated and installed Mountain Lion. I've clicked for iCloud for Mail. The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

They are grayed out because they are automatically set up whey you check Mail in System Preferences. If you didn't do that, go back and do so and your iCloud email account will be set up automatically.

Airport utility doesn't show the correct information

Hi - I am trying to get Airport Utility to work on my iMac (3.4 GHz Intel core i7, OS 10.8.4) but it does not show the correct information about my network. On my iMac, the utility consistently shows my Airport extreme and three Airport express as "Device Not Found". Yet the data suggests that is not correct: 1) Airport Utility on my older Macbook Pro shows all that all the devices are running fine; 2) Airport Utility on my iPhone shows that all the devices are working; 3) all the airport devices are showing green lights; 4) the wifi internet on my iMac works fine through my Airport Extreme; and 5) my music utility, Airfoil, routinely connects to all my airport express devices without a problem.
The only problem then is the Airport Utility on my iMac. How do I fix it?

If you are using 6.3 airport utility you must use ipv6 local link connection..
http://support.apple.com/kb/TS4597

ITunes Play Icons Aren't Displaying the Correct Information.

Similar Messages

Maybe you are looking for