ITunes PLAY/PAUSE Will Not Work After 10.5.4 Install

I have just installed Leopard 10.5.4 on my iMac G5 and iTunes player will not work. When I select a song, it will show in the player window, but, PLAY/PAUSE button will not function. I have checked iTunes Prefs and see nothing there that is not correct. I am able to navigate throughout iTunes and everything seems to work as before EXCEPT Play/Pause. (Actually, I don't know about PAUSE since I cannot get PLAY to work).
???????????

Raymond Rogoway wrote:
Used Software Update to update to 10.5.1. Now my install disk will not boot. Drive kicks out disk after awhile. Ran Disk Warrior which reported no changes. Repair permissions.
Ray
Does the disk also get ejected when you are running Leopard, or only when using it for booting?
Have you looked at it physically for scratches or that dirty film some DVDs had?

Similar Messages

  • After trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    after trying to update my iphone 5 to ios 7 via itunes my phone will not work at all, all i have is an itunes logo and cable logo on the screen HELP!!!!

    you'll want to restore it using itunes and recovery mode
    http://support.apple.com/kb/ht1808

  • ITunes 11.1 will not open after downloading.

    iTunes 11.1 will not open after downloading; iTunes64.msi is "missing". I can't uninstall the present iTunes version (11.0.5.5). Any ideas? Please?

    *****FIXED*****
    This is what I did to fix it.  I am running Win7 so I don't know if it will work on Win 8 or not. 
    1-Uninstalled QuickTime
    2-Uninstalled Apple Mobile Device Manager
    3-Uninstalled Apple Software Update Manager
    4-Uninstalled iTunes
    5-Uninstalled iCloud
    6-Uninstalled any left over Apple software
    7-Restarted Computer
    8-Installed iTunes
    9-Restarted Computer
    I did not install iCloud.  I was able to authorize my PC and Sync did work.

  • TS1702 Certain apps will not work after ios6 install.

    Certain apps will not work after ios6 update. Tiger Woods golf will run for about 5 seconds and stop. Have uninstalled/re-installed to no avail.

    My husband had the same problem with some apps after I updated his iPad 2 to iOS 5.  I checked the app store and there were updates for the apps to support the new software.  After updating, all apps work just fine.

  • HT1338 motion 4 will not work after yosemite upgrade

    motion 4 will not work after yosemite upgrade

    To be honest I do not use motion or any other compositing app so i do not miss it personally. However the new Motion is not that expensive, around $60 i think. Still, I understand your frustration.
    I am afraid the more the OS is updated the less compatible certain applications will become.
    Good Luck
    h

  • My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6

    My iPod touch 4G will not work after I tried to Downgrade it from iOS 5 to iOS 6. The screen is black and it doesn't work.

    Downgrading the iOS is not supported by Apple.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • Glide pad will not work after formatting g60-630ca

    Can somebody help? my glide pad will not work after downgrading to xp.  The pad works itself for the mouse but then the scrolls on the side will not.  Please help...

    You need the driver. It is a Synaptics Touchpad and you can use this driver:
    Synaptics
    Here is a link to the General XP Downgrade guide which has a link to all the drivers you need under "Moderate models:
    XP Guide
    The touchpad is hard because Windows does load a basic driver so it does not appear with an error in Device Manager, but the "real" driver is needed for advanced features like scrolling. Be sure you have all the needed Xp drivers, by the way.

  • HT1414 wifi will not work after restore

    wifi will not work after restore

    Se emy response to your other post
    https://discussions.apple.com/thread/4862098?tstart=0

  • Telephone will not work after installing fax wizard

    I have  a new HP Office Pro 8615.   After I installed the fax wizard, my telephone quit receiving or sending calls.  The only incoming call will ring on the fax.  Can I uninstall the fax, as I do not need it?

    Hi , Welcome to the HP Forums! I see that your telephone will not work after installing fax wizard, for your HP Officejet Pro 8615. I am happy to help!  What is the Operating System you are using? Windows or Mac? What version? If you do not know the Operating System you are using, please visit this website. Whatsmyos. If you do not need the fax, all you should have to do is unplug the phone cable from the back of the printer. That will prevent the printer from using the fax function.  If your phone continues not to work, I would consider contacting your phone provider.  Thank you for posting!  “Please click the Thumbs up icon below to thank me for responding.”

  • OMiC will not work after installing Leopard

    Does anyone know why OMiC will not work after upgrading to Leopard?
    After downloading Leopard, went into mail and tried to open a windat file, but a message came up stating OMiC disabled. I deleted that version, and tried to download OMiC 1.7.7 but it won't even get thru the download menu, it stops at "installation" gives me a choice of Tiger, or Panther, and it will not let me go any further. Has this happened to anyone else???

    I am not sure any of the solutions for these files have been made Leopard compatible -- I saw another post about this not long ago. See:
    http://discussions.apple.com/thread.jspa?messageID=5736631&#5736631
    Ernie

  • My Keyboard and touch-pad will work during post, but will not work after the os loads?

    I have a G60 and My Keyboard and touch-pad will work during post, but will not work after the os loads? Im running Windows 7, Anyone have any Ideas? I have already tried a hard reset, and safe mode???

    Try pressing the fn key and f2 to reach bios
    or
    try a usb mouse from your desktop
    S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

  • Ipod classic will not restore and will not work after many attempts

    I have purchased and replaced 3 ipod models, This is my third one (80GB ipod classic) and with out fail after 1 year and 2 months after buying it, it stopped syncing with my itunes and now after 5 attempts to restore it will not restore and will not work. I am sick of this and find it preposterous. What is wrong with ipods..? what is wrong with my recent one?

    I have tried to restore via itunes and I still get the same message on the Ipod after many many restore attempts."Use iTunes to restore" with the picture of a plug on the screen and then it just shuts down. Exactly 1 year and 2 months after I purchased it as was the previous Ipod I had in 07.... what is going on?
    Are ipods not made to work with both macs and pc's? it seems they just shut down after a while
    what can I do?

  • HT2292 Phone indicates connection to itunes on screen, will not function, after rebooting the itunes connection screen is still there.

    While downloading update, itune connection screen will not go away, phone will not work even after rebooting with itunes connection screen reappearing

    Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
    Resolve specific iTunes update and restore errors

  • Printer will not work after update to Mavericks

    I have a macbook pro and an HP7280 printer connected wirelessly.  After upgrading to Mavericks the printer will not work.  The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading)  When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed.  So I deleted the printer and reset the system and then added the printer back on - same thing.   Any ideas??

    It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
    With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

  • I updated software upgrade from itunes. now phone will not work at all. only have picture of apple icon and usb on screen

    i downloaded an upgrade from itunes last night to os5.1 i think. it said there was a problem with the download. now my phone will not work at all. it just has a picture of the itunes logo ans a picture of a usb cable on it. my computer will not recognise phone either

    http://support.apple.com/kb/TS1538
    Try rebooting it and connect. Make sure you're connected directly to a USB port using the Apple USB cable.

Maybe you are looking for

  • Don't know what install disks to buy for new computer

    I bought a computer from ebay with not install disks thinking I would buy those seperately. The computer I bought is a iMac G5 machine model PowerMac 8.2, Cpu PowePC GF (3.0). It currently has OS X 10.4.11 Installed. I do not have adminstrator rights

  • Manage PO with hundreds of Subcontracting Components

    Hi I have some affiliates where the subcontracting BOM has more than 200 components. My challenge is that I want to paste them in  a sngle shot rather than paste 30 as per standard functionality. How do we go about this?

  • How do i organize iphone photos w/o using icloud on ios8

    I don't want to see my pictures on a timeline, I want to see them in albums but I don't know how to create new albums and I don't want to use photostream. I just want the photos on my iphone available on my iphone in an easy to navigate way - and thi

  • Deleting CRM2007 customer enhancement

    Hi, we made a lot of testing of the creation and deleting of view enhancements and its sets  (BSP_WD_CMPWB) of the CRM2007 component IUICOBJD. Now, after deleting all enhancement sets we have the problem that,  when (after creating and assigning an n

  • Send a link via email that will start a workflow on a sharepoint online list

    I am trying to send a hyperlink in an email that will start a workflow on a sharepoint online list. I am unable to use javascript because the end-user will be clicking this link on their mobile device. I have found many articles that get me almost th