ITunes playback becomes choppy after machine comes out of stand by mode

Hi All-
I've recently started having an issue with iTunes where the playback of files on my hard drive (as well as a cd in the cd drive)becomes choppy and garbled after my machine has come out of stand by or hibernation mode. The only way to resolve the issue is to reboot the machine at which point things are fine until the machine goes back into standby mode and the problem reoccurs. Other audio program play back without an issue. I have reinstalled the latest iTunes software (ver 6.0.4.2), as well as updated the iPod software on my device, and the results are the same. The cd driver is ver 2.0.4.3 and the cd driver dll is version 2.0.3.2. Client OS is XP pro ver. 2002 with SP1. The machine has a gig of memory on it.
Given that it takes about 5-7 minutes to reboot my machine and the frequency that I put the machine into standby mode this has become quite a bummer. Any help is appreciated. Thanks in advance.
IBM Thinkpad Windows XP Pro

well done Skadel!
i'm not sure why this is only hits some folks under some circumstances like this. i've seen reports of itunes sound being bad only after minimising the itunes window, sometimes only when an application has closed, sometimes only with certain songs ...
at any rate, i'm glad you're up and running again.
love, b

Similar Messages

Slwo to Come Out of Stand By after OS2 Upgrade

Ladies and Gentlemen:
Ever since I upgraded my 16 GB PlayBook to OS2, it has been very slow - sometimes up to 17 seconds - to come out of stand by. Has anyone else run into this? Any ideas as to how to speed things up a bit? It was pretty well instantaneous with the previous OS...
Thanks!

Hello,
after upgrading to OS2, when my Playbook goes into Standby mode, it turns OFF??
Anyone... HELP!

When will the iphone 6 be back in stock after it comes out?

When will the iphone 6 be back in stock at the apple store after it comes out?

Davidm82 wrote:
When will the iphone 6 be back in stock at the apple store after it comes out?
First they run out of stock.
Then when they get more stock in, they put it on the shelves and they are no longer out of stock.

Live webcam video becomes choppy after 600 connections per stream

Hi!
Server conf:
2 x Intel(R) Xeon(R) CPU L5410 @ 2.33GHz
16Gb RAM
2 Gbit ethernet channel
OS - Linux CentOS 5.5 x86_64
FMS4 Interactive
Live stream parameters:
320х240
qua_=87
bw_=200000
kf_=5
fps_=18
So, after approximately 600 connections to one stream video becomes choppy (periodically freeze, slow motions). CPU-usage at this time is 100-120% (maximum is 800%, 100% per each core), network usage is 500 Mbit/sec.
But second live stream(with few connections) at this server looks fine simultaneously with 600 connections at first stream.
Experiments with recommendation in "Configuring performance features" documentation chapter(enabling/disabling aggregate messages and configure the size of stream chunks) do not help.
Please, help me to find bottleneck!
Thanks for answers.
Apologisw my english.

What Flash Player version are you using at client-side?? have you tried changing the FP to the latest (in case if you are already using latest FP, then try to switch to some previous version) and see if this issue still remains?
Regards,
Shiraz Anwar

HT201210 I have a iphone 4 and while it was updating it went into the connect to itunes and will not update to come out of it. can anyone help me "what to do?

I have a iphone 4 and it will not come out of the connect to iphone mode. I have connected to itunes and it will go about 3/4 of the way and say the phone cannot be updated. It was installing and update when this happened. can anyone help?

Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you should be able to restore to factory settings.

Outage on Monday, can't come out until Thursday - rage mode

This is totally unacceptable. There was a fire under a bridge which caused a large outage. All my neighbors are back, and I'm not. I call last night, and told someone needs to come out, but can't until Thursday. I pay for a service, and allows me to work from home a few days a week, plus kids, etc... How is this acceptable?
I refer people to Verizon, not anymore. Contract is up in December and the just lost a 5 year customer.

I too lost all my services yesterday (8/27)in the Tewksbury Area. They told me its my internal panel tat runs all my services...I too was told thur for service!! Spent close to 2 hrs on my cell phone no less...trying to get this resolved. I was told it was caused by an outage in my area and it would be up by late in the evening or Tues am. I called back to confirm about the outage and spoke to 2 different people and found out I was not in the outage area...so who do you believe??? I have someon comin today at my convenience to replace the panel!!! I am toatlly disgusted with Verizon and only been a customer for 6 wks!!! It has been problems from day 1 with the start of the install. I am now past me 30day trial and am looking into getting my termination fee waived.....

How do I get my chart to redraw after the onitor comes out of screen saver mode.

My program runs 24/7 monitoring an exhaust stream. The program usually nruns in the background. When the chart display is called up the display is not correct. this also happens when the screen saver has been on. How can I get the display to redraw the chart to diaplay correctly.

> My program runs 24/7 monitoring an exhaust stream. The program
> usually nruns in the background. When the chart display is called up
> the display is not correct. this also happens when the screen saver
> has been on. How can I get the display to redraw the chart to diaplay
> correctly.
This usually happens when the popup panel is not in memory and doesn't
know that it will ever need to be used. At compile time, LV optimizes
your code to leave out display calls and to leave out front panel data
copies if it thinks they will never be seen.
In the days before property nodes and invoke nodes, LV always got this
guess right, but these days it is possible to fool it. If you have a
subVI with no property nodes, and it doesn't use the VI Properties
to
Open panel on call, LV may optimize out the chart's buffer accumulation.
Then when the window opens, the buffer data is empty or old.
If you place a property node on the diagram for the popup panel, even
just to read the value of the panel visible property, LV will leave the
accumulation code in and the chart should have correct values when the
panel opens.
Greg McKaskle

Photoshop stops working after pc comes out of 'sleep mode'

Hello,
Photoshop stops working lately, when I start my pc out of 'sleep mode', I get the warning box 'Photoshop CC doesn't work anymore'.
Is this a known problem, can I do something about that? Thanks in advance!
These are my pc specs:
-Windows 7, Processor: Intel(R) Core (TM) i7-3770 CPU 3,40 GHz, RAM= 8 GB, 64 bit system.
-graphic card: amd radeon hd 7700 series
With regards,
Marcel

It's not "green" but I suggest never using "sleep" type operations. Windows and its drivers have never been good at making the transitions into/out of such modes, and probably never will be.
Just leave it running or save all your work and fully shut it down. Allowing the display to power down may be okay as a compromise, but even that could be problematic.
This is the experience of an entire career in software engineering talking.
-Noel

Windows 7 64 bit / HPE-010be Computer does not start up out of 'stand-by' mode

I had this problem several times since I bought this system last month.
I leave the PC normally in stand-by and then wake my system up by pushing a key on the keyboard.
In the case of the problem, I push a key on the keyboard, the system starts and I hear the fan and the drive running, but nothin appears on the screen for minutes.
The only way to get out is to force a full restart by pushing the power button for long time.
One thing I had one time that I did not force the full restart but waited for longer time. Half an our later I came back to my system and saw a full restart had happened.
In the log, I see:
Windows Operating System; Versie: 6.1.7600.16385; Id: 41; Gebeurtenisbron: Microsoft-Windows-Kernel-Power;
Msoft relates this log-issue to bad power-off situation, but honestly all the cases I've had I cannot remember issues. It could be that my computer is causing such situations by itselve.
Anyone had this problem? Solutions?
This question was solved.
View Solution.

Patrick,
What BIOS level are you running on your PC? What model NVIDIA video card are you using? If it's the 220 then try this HP NVIDIA video card update.
Try this procedure:
Unplug the PC and open it up.Clean out all the dust. Carefully remove and replace all the cables going to the motherboard one at a time. Do the same for the memory dimms and the video and sound cards if you have any. Plug your PC back in a give it a go.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Lenovo t61 comes out of standby automatically after the lid is closed

Hi,
I have a t61 + wind 7 + 32 bit + ultimate edition. It was working fine till now and suddenly I have noticed its coming out of the standy mode suddenly. I close the lid, its going to standby mode i see the little semi circle on the top and everything is fine. Suddenly when it finds any known wifi signal or any thing, which I think I have noticed, its comes out of stand by ....I can tell that from the beep it makes and the light suddenly goes off. After sometime I notice that the battery dies, as its in normal mode even when the lid is closed and it consumes all of the battery. Please let me know what settings have to be changed to get rid of this F error. I am facing a lot of trouble as it consumes all of the battery when I open the lid even if its fully charged. I think it has to do with some settings. I have verified everything power manager, wireless adapater etc. Any gurus pls suggest.
thanks,
Manu

a couple things you can check...
open up Device Manager and see if Allow this device to wake the computer is enabled for your mouse and/or your wired ethernet device on the Power Management tab of their Properties sheets.
hth.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

How much more will MacBook cost after Mac OS X Leopard comes out?

How much more will the Macbook cost after OS X Leopard comes out? Leopard will come standard with all macs after it comes out, won't it?

HI--
Welcome to the Apple Discussions.
How much more will the Macbook cost after OS X
Leopard comes out?
There's no way of knowing for sure, of course, but typically Apple's hardware doesn't go up in price when a new OS comes out. The price changes (up and down) in response to other factors.
Leopard will come standard
with all macs after it comes out, won't it?
In the past, there have sometimes been short transition times when the old OS was pre-loaded on new computers, but the box included upgrade CDs. Or you might get a coupon for the new OS for a nominal fee of $20.
At this point, only Apple knows how they plan on handling the transition to Leopard, and anything anyone outside Apple is just speculating.
charlie

Clean install of Windows 10 Retail (when it comes out)

I posted the following thread on the Windows forums but I think the Lenovo Community will help me better, I'd also like to specify that even if Windows 10 Retail version hasn't come out and Technical Preview is not enough to be able to help me, let's try to imagine Windows 10 will work in the same way as Windows 8.1 ok?
I bought a laptop with windows 8.1 pre-installed so I'm pretty sure it is UEFI-enabled, now I want to install Windows 10, a clean install, which means I want to delete all the partitions, but when I was looking through the Disk Manager and GParted (I also have Ubuntu, but uninstalling it is no problem, I already know how) I noticed there are a few partitions that I'm not sure if it's safe to uninstall, specially the EFI partition, this is how it appears in Disk Manager:
Recovery Partition.
EFI System Partition.
OEM Partition.
Windows Partition.
Lenovo Partition.
Recovery Partition.
This is what GParted shows after installing Ubuntu:
sda1 WINRE_DRV (Recovery)
sda2 SYSTEM_DRV (EFI)
sda3 LRS_ESP (OEM)
sda4 unkown (if possible I'd like to know what could this be.
sda5 Windows
sda8 Ubuntu
sda6 Lenovo
sda7 PBR_DRV (Recovery)
Main question is: Is it safe to completely remove all the partitions (including EFI and Unknown) or could that cause problems with the UEFI boot? Will Windows 10 TP or Retail after it comes out auto-creates the EFI and WINRE partitions (and Unknown)? Or do I have to do it when I'm installing like Ubuntu?
What is the unkown partition?
I hope you can fill me with knowledge in this area and thanks a lot for your attention
Link to image 1
Link to image 2
Moderator comment: Image(s) converted to link(s). For helpful information, please see: About Posting Pictures In The Forums.

You can find answer's to all your Win 10 question's here: http://www.tenforums.com/windows-10-forums/

CD Eject sound when MBP comes out of sleep

Perhaps this is typical - I'm a new convert from the PC world. But the only thing that I don't like about my new MBP is that the CD drive (when empty) makes the CD eject noise every time the machine comes out of sleep. Is this typical? What's it trying to accomplish? Is there any way to disable this behavior?
Any insight would be welcomed.
thanks,
Pete

Yes it's normal. It is the behaviour of the Matshita (Panasonic) drives as they are powered, which is what happens when you boot and wake from sleep. Unfortunately there's nothing you can do about it.

Automatically reconnect to Mobile Network when coming out of Low Power mode

My Pearl 8130 automatically disables the Mobile Network when it goes into Low Power mode. Unfortunately, it does not automatically re-enable the network when it comes out of Low Power mode. It also doesn't allow me to re-enable the network immediately after I've plugged it in, only after I've plugged it in and the battery has recharged for some period of time.
This means that I frequently absent-mindedly leave my phone disconnected from the network for hours at a time, even after the battery has recharged and the phone is capable of reconnecting. This is really inconvenient and, in my opinion, a huge design flaw.
Is there some way to configure my phone so that it will automatically re-enable the network as soon as (or soon after) battery power has reached the necessary level?

Actually, newer models do behave differently and have a different threshhold for cutting off the radio.
But remember this, the 8100 is getting to be an old device... and batteries have been upgraded since it was first released, as well as technology and specs on the newer devices.
The goal of the BlackBerry in cutting off the radio is to allow reamining use of your device, and to not allow the entire battery 100% to be sucked dry. Leaving the device signal and data running at less than 15% will very quickly deplete.
So, with that said, I would still recommend topping off the battery from time to time, in your case at night, or first thing in the morning.
And look at this application, ForceRadioOn
http://www.blackberrynews.com/2009/06/09/free-forceradioon-app-for-when-your-battery-gets-low/
But remember, using that app will drain your battery pretty quickly, but allow you to make that one last emergency call.
I guess you just can't have it both ways, long-life battery AND leaving the radio on below 15%
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Recover data from iphone after upgrade to 6.0 causes recovery mode

When I upgraded my iPhone 4 to iOS 6.0, unfortunately it put my phone into Recovery Mode, meaning as I understand it that I had lost all my data!! My back-up on my computer was over 14 months old, and my iCloud backup was incomplete. I used the computer back-up, not realizing how old it was, I thought it was only 2 months old, didn't catch the year.
Now I'm wondering if there's any way there might still be some data I could salvage on my phone. In particular, I am really hoping a few pictures and some videos I had taken just 3-4 days previously might be salvageable. Anyone know of a way to go about this? Or am I way too late, or was it never possible....
Hoping there might still be a chance....

I guess I could have some good news for you, atleast when it comes to your data. Its not gone, gone!
You might still be able to get back the data that exists in the backup of your phone.
Not sure how it comes out of the recovery mode, but in case you need to call people and don't have their contacts, or want to go through some texts or notes which were saved on your iPhone, then there could be some help
You can get any one of the following backup recovery softwares, which would basically extract data off your iPhone's backup and show to you on your computer
Total Saver from MyPhoneData - recovers contacts, texts, videos, photos, call history, notes. Cheapest and runs on Mac and Windows
Iphoneextractor - recovers voice memos as well. Is more expensive that the one listed above and would run only on Windows
Dr.Fone - super expensive at $100!!!! does nothing more than what the other 2 softwares listed above would do
Alright mate.. best luck getting back your data

ITunes playback becomes choppy after machine comes out of stand by mode

Similar Messages

Maybe you are looking for