Itunes problem with windows Vista

ok i bought my touchsmart tx2 1025 with windows vista ultimate 64 bit and well i ve noticed that ..well since this is my third time i exchange this computer and i noticed there was a problem with the speakers when i was playing music that anytime during a song i would get this distorted sound like when u put a lot of volume in ipod headphones that it sounds like a crack. Well that happened in my computer even with low volumes.
However I played two times the same song on itunes and two times on windows media player.
Every single time on itunes the sound came as if the speakers were about to blow... like a crack..
Every single time on Windows media player it never sounded like that.
So i am pretty sure its an itunes problem. Does anyone know how to fix this.. i would rather use itunes than windows media player but i really hate the sound it makes sometimes because it shows about 2 to 3 times during one song.

It's possible that the song your playing does indeed have a little audio distortion in it, some media players are capable of filtering it out in a silent way, others play a beep, hence with one song I have, if i play it in windows media player it goes on and then for a split second theres a beep, iTunes doesent seem to do it, so instead of filtering out the missing data, it plays it.
This is more likley a problem with the song than iTunes

Similar Messages

  • Itunes problems with Windows Vista

    itunes is somehow conflicting with new Windows Vista Computer causing it to lose all of my cd/dvd and usb devices and also errors when opening stating registry issues HELP!!!!!

    Which versions of each? iTunes was updated to 7.5. iTunes may not support x64.
    Did you tell or let iTunes during the install to "use iTunes for playing all supported media?"

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • Photo sync problem with Windows Vista?

    I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
    Thanks,
    Dean.

    I checked out the article and not much help, thanks anyway.
    Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
    If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
    Thanks.

  • Is iTunes compatiable with Windows Vista??

    hey ppl!
    is iTunes compatiable with Windows Vista??? i wanna know this if i am getting Windows Vista and if it can work on it
    cheers
    hosey

    Hi! I have just had windows vista installed onto my PC. I backed up all my songs etc from ipod yet when I have uploaded the latest version of itunes and installed the songs onto it, my ipod is not recognised. Basically when I go to put new stuff ontomy ipod a box appears saying that I can only be synced to one itunes library at one time. Then it asks if I want to sync to this library. Obviously I say no as I dont want to lose anything anyway now my old itunes library is somewhere in the ether and I cannot import any new songs! I have tried purchasing a few songs but again it will not importto my ipod!! Im so confused! Can anyone help me please??

  • HT1926 (iTunes) Problem with Windows installer package?

    (iTunes) Problem with Windows installer package?  I try to install the new version of iTunes but get an error "Problem with Windows installer package.  A Program required for this install could not be run."  Can anyone help shed some light for me as to how to correct this?  I have tried to install the program through Chrome, Explorer and FireFox but have had no success.  I have included a screenshot of the error.  Hopefully it's visable.  Thank you for any help.

    Found answer for anyone else curious.  I love the apple community.  Thanks guys for help!
    https://discussions.apple.com/docs/DOC-3551

  • Itunes incompatibility with windows vista

    Itunes versions 7.1 and 7.2 do not work with windows vista correctly. Both versions interfere with uploading the DVD drive when booting up the computer. The DVD drive can not start.
    Is there a solution for this?

    It's possible that the song your playing does indeed have a little audio distortion in it, some media players are capable of filtering it out in a silent way, others play a beep, hence with one song I have, if i play it in windows media player it goes on and then for a split second theres a beep, iTunes doesent seem to do it, so instead of filtering out the missing data, it plays it.
    This is more likley a problem with the song than iTunes

  • Cannot open iTunes 8 with Windows Vista Home Premium

    Hopefully someone here can help me with my problem. I have a new Ipod Touch that needs itunes 8 to work. I have a new HP PC with Windows Vista Home Premium. The problem I'm having is: itunes & quicktime will download successfully onto my computer, but after download will not open. I receive the error message "itunes has stopped working...A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". I have tried to open them from desktop & from programs ...will not work. I was using itunes 7 with no problems, but after upgrade to the new version (itunes 8) I started having this problem. Here are a few of the things I have tried so far with help from just about every tech support I could find: uninstall & reinstall itunes (tried this several times..didn't help, but itunes installs successfully each time)...try installing quicktime & itunes separately (didn't help)..disable firewall & virus protection (didn't help)...turn off Data Execution Prevention (DEP) (didn't help)...tried saving software to discs & installing itunes that way (didn't help)...I have updated all of my software including windows vista...I've run virus checks...& pretty much run checks on anything else I could find. I occasionally get the same error message when I try to open Rhapsody, but not every time. I'm thinking of using my backup discs & restoring my computer to factory settings. To do that would be a last resort, but I am getting pretty close to desperate. Does anyone think restoring it would help? If anyone has any ideas for me to try I would really appreciate it. Thanks so much.

    You need to to check to see if your Quicktime works normally. Itunes will not work if QUicktime doesn't.
    If Quicktime doesn't work, describe what happens with any error message in full.
    Go to your control panel and try to start QUicktime preferences. In XP you need to be in classic view to see it, I am not sure about Vista.
    Give the full text of any error message.
    Have you installed any of the following:
    ACE & K-Lite mega codecs package, QT alternative, Storm codec, WinAVI video converter, Mpcstar
    If so uninstall them, they are bad news for Quicktime.
    Report back with your results.
    If Quicktime is OK have you seen the Apple troubleshooting article for launch failure, I guess you have probably done quite a bit of it anyway, but is worth going through it systematically:
    http://support.apple.com/kb/TS1717

  • ¿Problems with Windows Vista or Sony Vaio?

    Hello everyone
    I have a Cisco 2100 WLC with two Access Points 1130, with two WLAN networks, one with WPA2 and the other with Web-Authentication. The two networks works correctly, but I have a client, a Sony Vaio with Windows Vista, which usually give  problems, disconnects, and when you try to reconnect, you can not.
    When  this happens, in the WLC appears the error "Decrypt errors Occurred for client xx:xx:xx:xx:xx:xx using WPA2 key on 802.11b / g interface of AP xx:xx:xx:xx:xx:xx" .
    Sometimes several times to restart the laptop, reconnect. The network card is an Intel 5100, anyone know if there is any inconsistency between this card and Cisco AP? Or is it a matter of O.S.?
    I have no other Windows Vista client to verify, the other clients are Windows XP and 7. I have tried reinstalling different drivers on the laptop and not the solution.
    Thanks

    Hi Carlos,
    Make sure that:
    1. you are running latest driver from intel on your laptop
    2. use only AES encryption with WPA2. If TKIP is also selected. Uncheck it and leave only AES.
    Cheers
    Serge

  • Flash player 11.0.1.152 installation problem with Windows Vista 64-Bit

    Hello,
    I just can't get Flash Player to install on my computer with Windows Vista 64-Bit - doesnt matter if I try with Firefox, Opera or IE (I usually use Firefox).
    The download isn't a problem, but when I start the downloaded .exe, this file just disappears from my download folder and nothing happens - besides starting a process called install_flashplayer11x32_mssd_aih_3.exe, which does nothing. The usual installation popup never appears. After that I can't try starting the installation again, until disabling the process via task manager ("Only a single instance of this application may run"). Doesn't matter if I try the download and installation with or without "McAffe Security Plus" btw - same result.
    I never had such a problem before - Flash Player 10.3 was and is no problem to install and use.
    I have tried all the measures suggested in the troubleshooting section on the official site, including the advanced troubleshooting measures (uninstall old version, run as administrator, disabling software firewalls, disabling virus scanner etc.). Nothing helps.
    I don't got those problems with my laptop running Windows 7 - just my desktop computer with Vista 64-Bit.
    Any help would be greatly appreciated.

    Try using the installers from the links in http://forums.adobe.com/thread/909550
    P.S. topic moved to the Installation section of the forum.

  • Previewing web page problems with Windows Vista

    Just wonderering if there is anyone who can solve a problem I
    have with Windows Vista, It wont let me preview my pages being made
    in Dreamweaver...I get a pop with a navcancl message...
    Can you help please as I am seriously thinking of going back
    to Windows XP...
    Creative

    No, but really - what's the message? I'm developing under
    Windows Vista and
    DW CS3 and never had an errors with previewing.
    Shane H
    [email protected]
    http://www.avenuedesigners.com
    =============================================
    Blog:
    http://avenuedesigners.com/blog/
    Web dev articles, photography, and more:
    http://sourtea.com
    =============================================
    Proud GAWDS member
    http://www.gawds.org/showmember.php?memberid=1495
    Delivering accessible websites to all ...
    =============================================
    "Shane H" <[email protected]> wrote in
    message
    news:f3tcg3$mvk$[email protected]..
    > Yeah, all the errors drove me nuts. I'm all the way back
    to developing on
    > Windows 3.1, now.
    >
    > --
    > Shane H
    > [email protected]
    >
    http://www.avenuedesigners.com
    >
    > =============================================
    > Blog:
    >
    http://avenuedesigners.com/blog/
    >
    > Web dev articles, photography, and more:
    >
    http://sourtea.com
    > =============================================
    > Proud GAWDS member
    >
    http://www.gawds.org/showmember.php?memberid=1495
    >
    > Delivering accessible websites to all ...
    > =============================================
    >
    > "htmlgirl" <[email protected]> wrote in
    message
    > news:f3ssbi$5va$[email protected]..
    >> Just wonderering if there is anyone who can solve a
    problem I have with
    >> Windows
    >> Vista, It wont let me preview my pages being made in
    Dreamweaver...I get
    >> a pop
    >> with a navcancl message...
    >>
    >> Can you help please as I am seriously thinking of
    going back to Windows
    >> XP...
    >>
    >> Creative
    >>
    >

  • Problems with Windows Vista for BPC, from Windows XP

    Hello,
    We have developed some templates in excel 2003 in SAP BPC for Windows XP and these work perfectly. But this templates in excel 2003 and with Windows VISTA makes a fault.
    The fault is: when the template is opened and you select a year (made with a EVCVW), the box for choose the year opens correctly, then you click OK,and the Excel makes a fault and close itself.
    How could i solve this problem?
    Thank you for the help.
    With best wishes

    Hello
    In this case open and check the MS Windows Application and System logs and foward to your MS Windows support channel to debug.
    Regards.

  • SAP problem with Windows Vista

    I have purchased a Laptop with Windows Vista OS having Internet explorer 7.0 and loaded SAP GUI 6.40 with patch 20. I am facing the following problems:
    1. Not able to execute CJ20N transaction
    2. Heirarchy reports are not showing column descriptions
    3. Some standard reports are not able to be executed
    4. Not able to get connected to my client thru Cisco VPN
    5. Not able to reply in webmails
    Also some times my system is taking lot of time to execute simple commands and shutdown.
    Can anybody help me how to resolve these?
    Thanks
    Raghu

    try this link:
    https://smpdl.sap-ag.de/~swdc/012002523100000896772007E/50083078_4.ZIP?_ACTION=DL_DIRECT
    if this does not work, try at http://www.sapsuperusers.com/forums/showthread.php?t=6088 but you will need to register on that website first.

  • Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

    Hi again,
    I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
    I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
    The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
    Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
    Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
    Thanks a lot. Any suggestion or advice very welcome and appreciated.

    I ran into this with Windows7 64 but, could not get the jet 4.0 to work.  Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect.  I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
    Paul Falkenstein
    Coleman Technologies Inc.
    CLA, CPI, AIA-Vision
    Labview 4.0- 2013, RT, Vision, FPGA

  • MSI 651 Radio Problem with Windows Vista

    When I start the MEGA Radio in Windows Vista I get the following pop up error: "Audio is not available. Please install audio driver first!" (the audio driver is installed 12x over).
    After clicking OK on the error pop the MEGA Radio loads, but no sound. 
    Please help me with this!!  Any suggestions???

    I too had this problem, and here is Adobe's official answer:
    "There is a know issue with Windows Vista and Acrobat Pro 7.
    You have two choices, down grade to Windows XP or upgrade to
    Acrobat Pro 8."
    "Those are my only two options?"
    "Yes"
    Hope that helps,
    Jorma@RealEyes

Maybe you are looking for

  • My computer reboots when i connect iphone 4

    Any ideas... I plug it in, it finds new hardware...thinks its a camera...and reboots itself. Happens if I tunes is already going or not. Was fine for the first few days then I took photos yesterday morning, now it reboots computer, Not much use havin

  • Dynamic SQL Statement with table name

    Dear all i like to have a SQL statement with a dynamic tablename. Is this possible? If yes, how? should be something like "select * from <mytablename>" Thank you Herbert

  • CU (Cursor bind lock) information.

    Hello! I have a customer that observes a Session holding a CU Exclusive lock on a object. This lock is happens on SELECT. Object is UNIQUE index SYS.I_CON1 He has the following questions: 1)Why CU Exclusive lock exist ? 2) How can I release the CU lo

  • [Solved] Root device doesn't exist

    Hi! EDIT SOLVED: Booted from a arch-core CD and did a; mv /etc/mkinitcpio.conf.pacnew /etc/mkinitcpio.conf pacman -U /var/cache/pacman/pkg/kernel26-2.6.25-4-1-i686.pkg.tar.gz Seems like a had a configuration error in my old mkinitcpio.conf file and k

  • Mac mini won't wake up when connected to TV

    I just connected my Mac mini (2009) to my LCD TV via HDMI using a mini-DVI to HDMI converter. Twice now when I switch to another input on the TV for any length of time, then I switch back to the Mac's input, the Mac seems to have crashed. The fan sta