Itunes + quicktime error message - service 'ipod service' (ipod service) fa

Help! Got new iPod Nano for Christmas and I STILL cannot get it to show up in iTunes - it has showed up in my device manager - with an over the icon - "The drivers for this device are not installed (code 28) To reinstall the drivers for this device, click Reinstall Drivers. - Then another error - Wizard cannot find the software to instal -(my iPod did not come with a disk!!!) I have done the "R's" several times! Downloaded and installed and uninstalled several x's from iTunes. Changed USB locations - I have three to choose from. Now - I am 'repairing' the latest installation from iTunes and I get this "itunes + quicktime error message - service 'ipod service' (ipod service) failed to start. Verify that you have sufficient privileges to start system services". Any ideas??? I'm not a computer genious....but I'm not a complete newbie, either! I am so FRUSTRATED!!!! This should be that difficult - I added additional RAM and it was a breeze and successful! This is just ridiculous! Any one have any other ideas???? I have read so much - even emptied the battery and recharged!!! HELP! Please! I just wanna hear some music!!! waaaaaaaaaaaaaaaaaaaaa!

Thanks - I got it to install by going into 'run' to get to permissions, etc. So that seems OK - but my computer is still not acknowledging iPod software and for some reason iTunes is now showing 'the URL could not be opened' when I go into Help for iPod. It's still not showing up in Itunes, either

Similar Messages

  • Can't new iTunes/Quicktime - Error Message

    Hi,
    I've done this in a separate post b/c I didn't see anyone else with this error message. ITunes starts to download normally, but then I get this message:
    "Errors encountered while performing the operation. Look at the information window for more details."
    Where is the information window? There is nothing on my screen that tells me what the error is, like an error number that other people seem to have... I've tried downloading on a few separate occasions and I keep getting this message.
    Thanks in advance if you can help or have suggestions.

    hi AndreaB!
    "Errors encountered while performing the operation. Look at the information window for more details."
    ... i can't recall having seen this particular error message before, either ... but my memory is fallible ...
    just checking to see if i'm clear on your situation ... you're getting this on an itunes installation? if so, are you running the install online, or are you downloading and saving the file to your hard-drive, and then running the installation from there?
    if the latter, is the error showing up during the download or the install?
    love, b

  • Upgrading itunes for new ipod 30mb - getting quicktime error message and

    Hi there,
    I am upgrading itunes 4.7.1 for a newly purchased ipod 30mb using itunes site downloaded setup.
    I am getting an error message as it reaches a certain point and won't install.
    I get this:
    The cabinet file "QuickTime.cab"required is corrupt and cannot be used. This could indicate a network error, and error reading from the CD Rom or a problem with this package.
    Then I get
    'The installation of QuickTime did not complete. Itunes needs QuickTime'Error message 2350'
    This is on a PC with an earlier version Itunes 4.7.1
    QuickTime is supposedly up to date and presents not problems.
    Any help would be appreciated I am a klutz....
    hp pavilion f1903   Windows XP  

    After comprehensive net search I resolved the problem by downloading itunes/quicktime in IE. I had been using mozilla and it was a simple as this!

  • VERY strange error message and behavior from ipod and itunes software

    Hi. I have two major issues with itunes 7.02 and ipod.
    1) After a successful install, and after double-clicking my desktop itunes icon, the program opens, but it takes about 5 minutes to load (I kid you not, maybe longer)... I have tried uninstalling and reinstalling 5 seperate times and it never opens any quicker. Please help, extremely frustrating.
    2)THE BIGGER PROB: I get the following error message when connecting my ipod (video) to my computer (itunes is already opened at this point, as it does NOT open automatically): " The software required for communicating with the ipod is not installed correctly. Please reinstall itunes to install the ipod's software. Problem is, I have reinstalled itunes 5 or 6 times already! HELP! Thank you!

    in sorry i cant help with the speed thing,
    make sure you install all the software from the CD your ipod came with, if that dosent work, try updating your ipods firmware : http://www.apple.com/ipod/download/
    Good luck and welcome to the forums
    Joe

  • I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019).

    I keep getting an error message that says "the ipod cannot not be synced""an unknown error occured (13019). I am trying to put albums on to my ipod by dragging and dropping. I have it set to manually manage music and videos. The albums appear in the music section under Devices, but they don't appear on my actual ipod.
    I have never had any problems doing this before, only in the last few days.

    I am having the exact same issue as you are with my iPod nano. This started happening the same day after I updated the iPod software, so I wonder if it is a bug within the software that Apple needs to resolve. I dragged 3 playlists of new music from my iTunes over to my iPod and sometime while it was trying to add those songs, the error 13019 popped up. Another note, which may not be related at all, was that iTunes told me at some point during this process (I believe before the error notification, but I'm not sure and that may be helpful to know) that I did not have enough room on the iPod to copy all of the songs, but it would copy as many as it could. What is curious, like in your situation, is now all the songs it supposedly copied appear to be on the iPod under the Device->iPod->Music label in iTunes when it is plugged into my computer, the playlists in question are also showing up there, and it does indeed say my memory is full under the iPod's general tab in iTunes. However, when going through my actual iPod when it is not plugged in, none of those songs or playlists are anywhere to be found.
    Anyways, all the established solutions to the 13019 error do not apply to this situation, as my iPod has always been set to manually managed so "unchecking" the Sync Music option under the Music tab of the iPod and rechecking it will not work because it was never checked in the first place.  And voice memos are obviously not applicable since we are not talking about an iPhone failing to sync music.
    Unless anyone can provide a new solution here, I may just have to take my computer and iPod up to the genius bar. Any suggestions would be appreciated.

  • Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    Updating ipod touch to os5.1  got an error message "cannot connect the ipod touch because the pairing record is missing"   don't know what this means or how to fix but am stuck, only option is to answer ok and close the error box.  Any ideas?

    #1
    - Try another cable. The cable for 5G iPod (lightning connector) seems to be more prone to failure than the older cable.
    - If a 5G iPod               
    Iphone 5 lightning port charging problem - SOLUTION!
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar
    #1.1 n/a because the errror message overrides it
    #2 see #1
    #3 iOS: Device not recognized in iTunes for Mac OS X
    But could be caused by #1
    #4 Covered by previous ones
    #5 Obvious jpegs are photos and thus will not sync as videos. Also see:
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod
    iTunes: Frequently asked questions about viewing and syncing videos
    #6 iOS: If you can't back up or restore from a backup in iTunes
    First #7 See #6
    Second #7 You have so many other problems resolve those first
    #8 Resolve other problems first

  • HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

    am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • Error message when updating 30GB ipod

    I keep getting this error message telling me my ipod was unable to update, whenever I attempt to update my ipod, then it crashes and I'm forced to restore. Why might this be, and is there some sort of 'soft restore patch' that might be available from Apple so I don't have to keep on erasing my music?
    5th Generation 30 GB iPod with video Windows XP
      Windows XP  

    See this...
    Disk Cannot Be Read or Written to error when syncing iPod
    btabz

  • How can I get a credit card re-instated with ITunes/Apple Store?  It was blocked due to an ITunes billing error.  Called customer (lacking in) service, but they were no help!

    How can I get a credit card re-instated with ITunes/Apple Store?  It was blocked due to an ITunes billing error.  Called customer (lacking in) service, but they were no help!  The rep emailed that I had to get a new credit card   No way.... --PB

    Only Apple Account Security could help at this point. You can try calling Apple Support in Canada - you'll have to find one of the several ways, such as Skype, to call an 800 number from outside of the relevant country - and ask for Account Security and see if they can help. Or you can find a friend who speaks Chinese and ask them to help you talk to Apple Support in China. There are really no other options that I know of.
    Note, by the way, that these are user-to-user support forums. You aren't speaking with Apple when you post here.
    Regards.

  • How to retrieve error message(s) after failed web service call

    Hi!
    I tried to create an item using the web service ego_item_pub.process_item and it worked ok (version 12.1.1). Sending the same request again, I got an error which should be ok since the item id already exists. The thing is, that I only get an "E" as return status:
    <X_RETURN_STATUS>E</X_RETURN_STATUS>
    <X_MSG_COUNT>1</X_MSG_COUNT>
    As described in the integration repository, there should be a parameter called msg_data which should contain the message if there is exactly 1 message, but I cannot find it.
    So, I tried to get the message using fnd_message.get, but the response of my web service call is:
    AuthorizationFailure : User not authorized to execute service. (I use sysadmin/sysadmin as ws security user).
    I use the following grant details:
    All Users     Direct     GLOBAL     Revoke Action Enabled
    SYSADMIN SYSADMIN     Direct     USER
    What else can I do or how can I retrieve error messages for a failed web service call?
    Thanks a lot,
    Konrad

    Hi Konrad,
    As we've found out, search the Integration Repository for internal name ERROR_HANDLER and use that. Letting the general public know the answer for this one!
    Regards,
    Gareth
    http://garethroberts.blogspot.com

  • [svn:bz-trunk] 15090: Bug: BLZ-506 - Unexpanded {0} in error message from LocalFileResolver related to services .configuration.file

    Revision: 15090
    Revision: 15090
    Author:   [email protected]
    Date:     2010-03-29 01:55:44 -0700 (Mon, 29 Mar 2010)
    Log Message:
    Bug: BLZ-506 - Unexpanded in error message from LocalFileResolver related to services.configuration.file
    QA: No - I already tested.
    Doc: No
    Checkintests: Pass
    Details: Applied customer's patch.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/BLZ-506
    Modified Paths:
        blazeds/trunk/modules/common/src/flex/messaging/config/LocalFileResolver.java
        blazeds/trunk/modules/common/src/flex/messaging/errors.properties

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available, what should I do?

    My iphone suddenly crashed and asked for restoration, however itunes sends error message of host not available (3014), what should I do?

    Try -
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    The "device may need service" means a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar
    Also see:
    3014
    Restoration of code 3014 will not work?: Apple Support Communities

  • HT1338 Not able to down load itunes updates, error message: corrupt file could not be saved

    Not able to down load itunes updates, error message: corrupt file could not be saved try again another time.  All other update are able to download...... but not Itunes. 
    Note:  My internet service is DSL and very slow (military installation with no other option).

    Not able to down load itunes updates, error message: corrupt file could not be saved try again another time.  All other update are able to download...... but not Itunes. 
    Note:  My internet service is DSL and very slow (military installation with no other option).

  • Unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    unable to update itunes. help. error message when trying to update to latest version of itunes. "the installer has encountered an unexpected error installing this package. this may indicate a problem with this package. error code 2721"

    Hello chae84swangin,
    I recommend following the steps in the article below when getting an error message trying to install iTunes:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS1368 When I try to make a purchase at the App Store or iBook Store or iTunes an error message tells me my account is not valid at the UK store. I live in Canada so how did I get to be connected to the UK and how can I get back to Canada?

    When I try to make a purchase at the App Store or iBook store or at iTunes an error message tells me my account is not valid for the UK store. I've no idea how I got connected there and I'd like help getting back to Canada where I live. Any suggestions?

    Change App Store
    1. Tap "Settings"
    2. Tap "iTunes & App Stores"
    3.Tap "View Apple ID"
    4. Enter your user name and password.
    5. Tap "Country/Region."
    6. Tap "Change Country/Region"
    7. Select the region where you are located.
    8. Tap "Done".

Maybe you are looking for

  • Safari doesn't open and doesn't work at all!!!

    Since three days ago, I can open safari at all. I just bounces twice and then stops. I have already tried the solutions offered in other threads which complain about similar problems with safari but safari remains troubled. I am not good at this. Ple

  • External DVD drive in Mac Pro

    I've installed an older external DVD drive, internal in my Mac Pro. I see now that there is slight different in the design of the shuffel. Is it possible in any way to make my old drive, open the 'front door'? Mac Pro   Mac OS X (10.4.8)  

  • Video Issues with Boot Camp / WinXP Pro

    I have a MacPro 2.66, Radeon X1900 with a 23" Cinema HD Display. The problem I'm running in to was the same one I first experienced when installing XP Pro. No video. There was a video signal to the 23" display, but I got nothing other than a black sc

  • Automatic backup not working

    My phone use to back up automatically but will not do so anymore. I have plenty of storage, my phone is locked, charging, and connected to wifi. What gives?

  • Oracle Developer Installtion problem

    I am trying to install Developer 2000 (Ver 6.0) on Windows NT Client. I am getting this error ... "Your system does not have an Oracle home set up on it. As a non-administrator user, you cannot set up an Oracle home. Please have your adminstrator set