ITunes/Quicktime killes my Windows 2000 SP4

After installing recent iTunes/Quicktime for Windows I am not able to boot my PC with Windows 2000 SP4. I can't reboot in save mode neighter - nothing goes.
Never saw a software which crashes your OS - I can't believe that!
What to do now? Don't tell me to re-install Windows 2000.
Thanks.

I had the exact problem on two of my Dell Dimension running Win 2000. I had to painfully re-install everything. Did you fix yours?

Similar Messages

QuickTime Player requires Windows 2000 or later ERROR

I had been using QuickTime without a problem for several months, when all of a sudden I started getting an error that says "QuickTime Player requires Windows 2000 or later..." and QuickTime refuses to open. The strange thing is that QuickTime still works in my internet browser, it just cannot launch movies or open from my local machine. So, basically I guess the browser plug-in is unaffected. iTunes also works fine.
I'm running Windows Vista 32-bit. My graphics card is an nVidia 8800GTX. My Windows, graphics drivers, QuickTime and iTunes are all up to date. I have made sure Compatibility Mode is disabled in the QuickTime.exe properties.
Any idea what the issue could be?

I found the solution to my problem. It's actually pretty obvious, but I did have the "Run as an Administrator" option checked in the compatibility tab of the QuickTime.exe. I didn't think that could be a problem I guess, but when I unchecked it... QuickTime starting working again.
This might not be the solution for everyone with these symptoms but make sure NOTHING is checked in the compatibility tab.

QuickTime Player requires Windows 2000 or above - Error

Running Vista 64 and get the following message: "QuickTime Player requires Windows 2000 or above." iTunes works fine, but when I try to run QT it fails. Any ideas of what the problem could be? Not in compatibility mode in either app. Running default configuration. Vista is at current level.
Thanks.

I found the solution to my problem. It's actually pretty obvious, but I did have the "Run as an Administrator" option checked in the compatibility tab of the QuickTime.exe. I didn't think that could be a problem I guess, but when I unchecked it... QuickTime starting working again.
This might not be the solution for everyone with these symptoms but make sure NOTHING is checked in the compatibility tab.

5G iPod and Windows 2000 (SP4)

I have successfully installed various iPod models to a number of Windows XP-based computers, but I am having problems installing my new 5G iPod to my Windows 2000 (SP4)-based machine.
Upon connecting the iPod to a USB 2.0 port (self-powered hub, 500 mA per port) on my machine, Windows 2000 finds the iPod and lists it in Device Manager as "? Other devices/ ? iPod" and calls for a computer restart. On restarting the computer, Windows 2000 finds the iPod, loads iTunes, and updates the iPod. However, Windows 2000 doesn't list the iPod as an "Other device" at this point, although it does show up under "Universal Serial Bus controllers" as a "USB Mass Storage Device." So far so good. But then, after a few minutes (remaining connected to the computer all the while, with iTunes running), the iPod turns itself off. iTunes still shows that the iPod is connected, but if I instruct iTunes to "Update the iPod," iTunes can't locate it and I get a "System Settings Change (new device)" window from Windows 2000 instructing me to restart my computer. Also, the iPod does not charge when connected to a USB 2.0 port unless Windows 2000 has found the iPod, listed it as an "? Other devices/? iPod" and is waiting for a restart. In this case, it charges just fine.
Is the 5G iPod truly compatible with Windows 2000 as advertised? Is there a fix for the problem that I am having? I have tried ALL recommended trouble-shooting steps several times, to no avail.
ASUS P2B-LS Windows 2000 Service Pack 4 Installed

Your version of Windows is not compatible with iTunes 7.4 or the third generation iPod nano.
(24749)

Iphone driver for windows 2000 sp4?

When I plug my iphone in to my windows 2000 sp4 box it is not recognized. I get the "add new hardware" wizard and it wants me to locate a driver. I already have itunes 7.3x installed. Is there a windows 2000sp4 driver? Can I use the windows XP driver?

Is Win2K supported?
The iPhone spec page states...
Windows system requirements
PC with USB 2.0 port
Windows Vista Home Premium, Business, Enterprise, or Ultimate Edition; or Windows XP Home or Professional with Service Pack 2 or later
iTunes 7.3 or later
15" MBP, 2.16 CoreDuo, 2GB Mac OS X (10.4.8)

How to configure Failed RID master in Windows 2000 SP4 DC?

We are still using windows 2000 SP4 server due to application compatiblity of our core application, this error has occur during a fire here in our office then the physical server itself, migrated to our DR site, then after that event the physical server
itself join again to its original place where as, in H.O branch.
First Problem:
Now our branch office site users always fails to log to their workstation, we still need to reset their password again and again after the day ends , and it will come back again tomorrow.
Second Problem:
When we are adding a user account it always say's "Windows cannot create the object because the Directory Service was unable to allocate a relative identifier" it predict that the RID master has been corrupted because of the migration
from site to site,
Can I still have answers here even though this is way way to obsolete from microsoft, I need help please :)

Hi thanks for your kind reply,
No, there are 4 DC in our environment but the forest root DC has the problem, I only create user accounts, I still not creating other object in active directory.and also the replication between root DC and other DC has problems. but I think its in the DNS
part, just need step by step process. :)
I'll give it a try on what you suggest but is this tried and tested? because when you replicate from corrupted FSMO roles DC, the new DC will also infected with errors,
By the way I already tried ntdsutil to fix the AD database and all are passed.

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

Quicktime player requires windows 2000 or later

Hello, I can't use quicktime, it gives me the error " Quicktime player requires windows 2000 or later" and changes all my icons into super size. I have windows 2000 and I've disabled all in the compatibility tabs (as it requested) and this does not help. Any ideas as to what is wrong and how I can fix it. It used to work just fine until the newer version of Quicktime was downloaded.
Many Thanks

+Hello, I can't use quicktime, it gives me the error " Quicktime player requires windows 2000 or later" and changes all my icons into super size. I have windows 2000 and I've disabled all in the compatibility tabs (as it requested) and this does not help.+
With that one, try heading back into the Compatibility tab.
Are any of the *display mode* boxes checked? If so, uncheck all of those too, and click okay. (They can also cause that message, and having one of those selected is consistent with your icons/desktop resizing.)
Any better luck with the launch after that?

BOXI R2 SP4 on Windows 2000 SP4 and Internet Explorer 6 Service Pack 2

Hi
I have a customer that has BOXI R2 SP4 installed on Windows 2000 SP4. He is aware that Internet Explorer 6 Service Pack 1 is not supported for BOXI R2 SP4 but he is not able to find I.E SP2 for Windows 2000 SP4. What can he do as he is experiencing some inconsistencies in Webintelligence?
I have suggested already to:
downgrade BOXI R2 to SP3 and use the line 3 of code as this supports I.E. SP1
upgrade the O/S to XP and use BOXI R2 SP4 and I.E. SP2
Thank you in advance.
Regards,
Federica

I don't see any reason to downgrade BOXi R2 to SP3.
While Microsoft will continue to support Windows 2000 till 2010, BO advises recommends that customers be on the latest SP. In your customer's case, this will not be possible. Also tech support will require one to be on the latest SP before they will troubleshoot any issues. ADAPT resolution also requires on to be on the latest SP.
I think it prudent to upgrade the OS (on the clients) to XP.

Need Help Downloading Windows 2000 SP4.

I recently had a problem with my ipod installation disk and some one had told me I had to download Windows 2000 SP4, well Last night I had downloaded Windows 2000 Service Pack 4 and right after downloading it had been on my desktop so I went to click it and 2 Errors came up which said The W2KSP4_EN.EXE File Is Linked To Missing Export NTDLL.DLL:NTShutDownSystem, and the second Error said A Device Attached To The System Is Not Functioning.
I dont know much about computers and dont know what im doing wrong, I would uninstall it and download it again but I have dial Up and it takes 7 hours to download.
Can anyone help??

Most likely there is a problem with your downloaded file. Can you ask someone with Broadband to download it and burn a CD to you?
Windows 2000 Service Pack 4

Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4

Hi
Sorry for re-posting on this JAVA FX Installation Form form (earlier on JAVA FX general )
Downloaded : "javafx_sdk-1_2_3-windows-i586.exe" on WINDOWS 2000 SP4
Status : Not able to install
Error : JavaFx(Tm) 1.2 can not be installed on system esrlier than Windows XP x86
May be my OS ( Window 2000 SP4 ) obsolete but I cannot update since Major of other (JAVA 1.5) dev happens on my system
Any Ideas ..... :(
with regards
Karthik

Don't crosspost, please!

Oracle report out of order after update Rollup for windows 2000 sp4

hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanks

Hi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks

10g (10.2.01) setup/java.exe hangs on Windows 2000 SP4.

Hi all,
I'm currently having an issue with a 10g install on Windows 2000 (SP4) hosted on a Windows Virtual Machine.
I remote to this machine using PCAnywhere.
When I run setup.exe it just hangs on the java.exe process.
I have run the setup with a -debug option and am not seeing anything out of the ordinary.
I have also checked the the log and it does not seem to contain any errors.
I have run through the 10g pre installation requirements and don't believe that is a problem as the
machine and OS meets all the criteria.
I have researched a similar setup.exe/java.exe hanging issues and have tried some of those solutions to no avail.
For instance moving the 10g the install folder to C: drive and confirming there are no spaces in the install path.
Increasing the JRE memory allocation to 1024 in oraparam.ini
Log file contents:
Using paramFile: C:\10g_Client_10201\install\oraparam.ini
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The commandline for unzip:
C:\10g_Client_10201\install\unzip ../stage/Components/oracle.swd.jre/1.4.2.8.0/1/DataFiles/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The commandline for unzip:
C:\10g_Client_10201\install\unzip ..\stage\Components\oracle.swd.oui.core\10.2.0.1.0\1\DataFiles\/"*.jar" -d "C:\Temp\OraInstall2008-10-21_04-54-08PM"
The number of files bootstrapped for the jre is 584.
The number of files bootstrapped for the oui is 100.
Total args: 23
Command line argument array elements ...
"C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2\bin\java.exe"
-Doracle.installer.library_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\lib\win32"
-Doracle.installer.oui_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\oui"
-Doracle.installer.bootstrap=TRUE
-Doracle.installer.startup_location="C:\10g_Client_10201\install"
-Doracle.installer.jre_loc="C:\Temp\OraInstall2008-10-21_04-54-08PM\jre\1.4.2"
-Doracle.installer.exec_location="C:\10g_Client_10201\install\oui.exe"
-Doracle.installer.nlsEnabled="TRUE"
-Doracle.installer.prereqConfigLoc=""
-mx1024m
-cp
"C:\Temp\OraInstall2008-10-21_04-54-08PM;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstaller.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oneclick.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xmlparserv2.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\srvm.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\share.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraInstallerNet.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\xml.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-collation.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\orai18n-mapping.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\emCfg.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ojmisc.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstImages.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_de.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_es.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_fr.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_it.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ja.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_ko.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_pt_BR.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_CN.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\InstHelp_zh_TW.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\oracle_ice.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\help4-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\ewt3-nls.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\swingaccess.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\classes12.jar;\;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\OraPrereq.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4.jar;C:\Temp\OraInstall2008-10-21_04-54-08PM\oui\jlib\jewt4-nls.jar"
oracle.sysman.oii.oiic.OiicInstaller
-scratchPath
"C:\Temp\OraInstall2008-10-21_04-54-08PM"
-sourceLoc
"C:\10g_Client_10201\install\../stage/products.xml"
-sourceType
network
-timestamp
2008-10-21_04-54-08PM
-debug

As Daniel stated on his previous post, this is not supported from the official oracle point of view, so if you are implementing this for production environments, even if it worked, you would be on your own. However, this should work. Check if you have any other java environment on the scope of the PATH environment variable. A virtual machine is from the OS configuration point of view the same as a physical machine, if the PATHs are scrambled and if you are accessing different versions of JRE at install time, this won't work, and the first symptom is a frozen java session.
~ Madrid
http://hrivera99.blogspot.com

Essbase 5.0.2 (sp14) on windows 2000 (sp4 )

Are there any known issues with running Essbase 5.0.2 with windows 2000 sp4?

<p>Did you ever find out the answer to your question on usingEssbase 5.0.2 on Windows 2000?</p>

Install SAPgui 710 on Windows 2000 SP4

Hi,
I try to install SAPgui 710 on Windows 2000 SP4. But when i launch SetupAll.exe, window "SAPgui install master" does not appear.
Although, Install SAPgui 640 on Windows 2000 SP4 is success.

Hello Sergey
please be sure that the INTERNET EXPLORER 6 is installed on the W2k Clients!
If not, then the new NWSapsetup can not start!
Many of my messages in the OSS with same error description had under W2k the problem that the IE there was not in version 6.
If you can not solve this problem by yourself, please open a message in "OSS" under BC-FES-INS !
Best Regards
Sven

ITunes/Quicktime killes my Windows 2000 SP4

Similar Messages

Maybe you are looking for