Itunes Radio does not operate on my IPad.  All stations are unavailable

I have downloaded the newest version of ITunes on both my IPhone and IPad.  I can use ITunes Radio on my IPhone, but not my IPad.  It comes up, but all the stations say that they are unavailable.  I am at home with wi-fi.  What's going on?

Hi, herekitty99. 
Thank you for visiting Apple Support Communities. 
Try forcing all applications to close and power cycle the device.  Test accessing iTunes Radio after processing these steps. 
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Cheers,
Jason H. 

Similar Messages

  • Edu DVD in computer iTunes but does not show up in iPad iTunes or iPad video.  How do I make the DVD contents available on the iPad?

    Educational DVD added successfully to computer iTunes but does not show up in iPad iTunes or iPad video.  How do I make the DVD contents available on the iPad?

    Thanks!  For whatever bizarre reason for which I have no answer - I sync'd my iPad to my MBP the old fashion way (not iCloud) and the movie showed up just fine.  It is Nikon camera 'how to' video. I like to watch them for a better indepth discovery of what the camera can do.  The only weird thing about the hard wire sync is that it was placed in a catagory "home movies" which was never there before...actually it showed up in two places "home movies" and TV shows.
    So, thanks anyway!  Pretty cat!
    Mona

  • TS5181 iTunes radio does not appear in "Music" on my iPod Touch, Why?

    iTunes radio does not appear in "Music" on my iPod Touch. How can I fix this?

    Ok, I have resolved this issue myself. I contacted Apple support but they had no clue.
    The resolution is this, bring Siri up and say "radio". Radio comes up and you touch "now playing". Believe it or not the radio icon appears and remains.
    I hope that helps other folk.

  • Itouch5 why when I open up the music app iTunes Radio does not appear I have iOS 7 and I am in the US also any answers?

    I have iOS 7 and am using an itouch 5 in the United States but iTunes Radio is not opening when I go to the music app any solutions?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    The above reset work for some users
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             

  • What can I do when iTunes radio does not play a song?

    This is what I'm seeing in iTunes 11.1.2.32 Windows (Win7 x64): Sometimes, iTunes radio will show the next song to play, but the bar is in barberpole like formation (i.e. it seems to be downloading/streaming) but it does nothing. It'll sit like this forever if I let it. To my knowledge this happens 100% after a commercial, and sometimes after songs. I could hit the next button, but I also understand that this takes away one of my skip options-- which means I'll run out of options. What are the options, and is this a bug?

    Never mind, it had something to do with conflicting sound enhancements. Weird, but okay.

  • How can I view my app purchases when it keeps sending me to iTunes which does not work on my iPad and yet shows activity?

    I Just received a receipt from the App Store. It was for opening one section of a game when I had already bought the full game. I went to the bottom to check on my purchases. It took me to the App Store for view history. I entered my Apple ID and then it switched me to ITune which doesn't work on my iPad! And yet it showed activity in ITunes. A few months ago I had a purchase show up that I didn't make. I contacted the developers because I love their new products so much and wanted to see if it might be a bug in their system because the confusion was within their games only. I would REALLY like to view my APP STORE history but it only lets me get to the part where you can open the apps that are showing. Is their a way to view my full APP history, with dates, money spent etc? I would love to know how to get there. Thank you, Diane Maya

    Pay attention to the numerous posts on this tonight.....try again tomorrow.
    GB

  • ITunes 10 does not see Airport Express because port 3689 is unavailable

    I never had problems with iTunes 9 and Airport Express, but since iTunes 10 the following problem occurs regularly: iTunes starts, but does not "see" Airport Express (AE) as an external speaker. Sometimes it also loses connection after Windows hibernate mode, but that might be another issue.
    What I found out is that it is NOT a firewall issue, otherwise it would not work once in a while. What I saw, though, is that TCP port 3689 is sometimes stolen by other apps like Mozilla Thunderbird (TB). I.e. if Thunderbird is started BEFORE iTunes, it might use 3689 as a listening socket. iTunes then cannot see AE until I shut down TB and restart iTunes. This is very annoying and I only found out after many weeks when watching TCP live connections in my personal firewall software.
    Two questions arise:
    1) If listening port 3689 is unavailable, why does iTunes not show any error message? There is absolutely no indication as to why it does not find the external AE loudspeaker. BTW, the AE config programm can connect to the hardware easily.
    2) Even if port 3689 is blocked by another application, Airfoil for Windows works flawlessly with my AE. I can even tunnel iTunes through Airfoil and then listen to music in my living room, even though iTunes does not see AE. Why can a 3rd party program do something which iTunes can't?
    There must be a way to smarten up iTunes and fix this annoying bug.

    Nerd

  • NSS4100 RAID DOES NOT START Please check that all components are present

    Hi, The NSS4100 storage system failed to start the raid10.
    The message is:
    Failed to start RAID
    Please check that all components are present
    All the disks are present as you can see in the attached image.The system has been restarted twice. Is there a possibility to start again the raid without losing data?
    Thank you,Dan

    Hi.
    I have exactly the same problem which is discribed first in this Thread.
    We have a NSS 4000.
    4 HDs - RAID 5
    SATA 2 was faulty an the RAID was degraded
    There was no problem with the data on the Volumes. I pulled the disk on SATA 2 (which was the one which no longer was in the RAID). Ich pushed it in again. Then on RAID site i clicked on 'Edit' and then on 'Add'. I thought the RAID would then synchronize the fourth HD and the status is going to be 'Running' and we are safe of one harddisk failiure.
    Log:
    2010-01-04 13:04:49 RAIDA : Rebuild Finished
    2010-01-04 13:04:46 RAIDA has failed.
    2010-01-04 13:04:46 RAIDA has suffered a drive failure.
    2010-01-04 11:27:15 RAIDA : Rebuild Started
    While the process was synchronizing i could access the data on the Volumes.
    But after 90 min the RAID was broken. No Access on the data - no shares. The Status is 'Stopped'. All 4 HDs are Online and the Health Status is 'Passed'
    If i click on Start:  "Failed to start raid. Please check that all components are present."
    I have no saved configuration because i thought that there will be no problem with this 'basic procedure' of a RAID device.
    Even if the HD is broken the RAID should be doing his job in 'Degraded' mode. Thats because i am using a RAID.
    So am i right that our data is gone because only one HD from a RAID 5 seems to be broken?

  • My passcode does not work on my ipad device. what are my options?

    How do I reset my passcode on my iPad device?

    Hello eleemichel,
    If you cannot access your iPad because the passcode is not being accepted, then what you would have to do is restore your iPad. To do that, take a look at the article below to walk you through it. It may come down to putting your iPad into recovery mode and then you should be able to use iTunes to restore it. If you have a back up in iTunes or iCloud, then you can put that data back on after the restore is complete and it will not bring back the passcode unless the back up was encrypted in iTunes. 
    iOS: Forgot passcode or device disabled
    http://support.apple.com/kb/ht1212
    Regards,
    -Norm G.  

  • I keep getting this message: Some of the Audible files in the iTunes library were not copied to the iPad because you are not authorized to play them on this computer."  my audiobooks will not load to my ipad.  Why?

    Any suggestions.  I deauthorized and reauthorized my ipad and my imac.  I still get the message

    See: Authorizing your Audible Account in iTunes (Mac)

  • After updating to Yosemite ITunes update does not keep me logged in

    After updating to Yosemite ITunes update does not keep me logged in all the time. What happen to staying logged in when I decide to logout? Anyone know were to find info on being g able to turn this feature on or off? Thank you all who reply I use my ITunes all the time and hate it to put password in all the time is so frustrating to me.
    Thank you

    Web sites usually remember you by using a cookie, either a traditional browser cookie or a Flash cookie. If you have set Firefox up to clear your history when you shut down, you may be deleting the site's cookie(s), thus making you anonymous upon your return.
    The subject of cookies can trigger strong feelings, so you have a lot of options for how to handle cookies, including built-in choices, add-ons, etc. Rather than write out a very complicated set of options, could you I refer you to an article here:
    * [[Cookies - Information that websites store on your computer]]
    If you have a specific idea for how you want Firefox to handle cookies, but you're not finding enough help around here, please post back on your objectives so we can help you implement it.

  • My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

    My ipad turns off randomly and doesnt turn back on and wont restore with itunes and i tried holding the power and home button down and i see a faint apple logo than it disappears and still does not operate please help solve this issue

    i have the same problem...my ipod is 4th generation?uggghhhhh

  • Itunes store does not show on ipad when i launch app its pages are blank

    itunes store does not show on ipad when i launch app its pages are blank

    This indicates there might be an issue with the time configuration on the device.
    Go to Settings > General > Date and time. See if Set automatically is switched to on. If so, switch to off and ensure you set date, time and time zone manually and correctly.
    Power off the device (hold sleep button for four seconds, then slide to power off), then power back on.
    If issue persists, switch Set automatically back to on, and if not resolved then restore the device.

  • ITunes Radio is not showing up on my iPad

    iTunes Radio is not showing up on my iPad now. It was there after my iOS 7 upgrade. Can't find it now. Please help. Thanks.

    It was there after you updated to iOS 7? You do know that iTunes Radio is only available in the USA right now. If you are certain that you should have it or that you did have it before, close the music app and reboot the iPad and them look again.
    Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app thumbnail to close it.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • HT4913 My IPhone 5 will not recognize that I have an Itunes Match account.  When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match.  This does not happen with my Ipad.  Any Ideas what to do?

    My IPhone 5 will not recognize that I have an Itunes Match account.  When I try to turn the Itunes Match button on in settings I get a mesage saying I am not subscribed to ITunes Match.  This does not happen with my Ipad.  Any Ideas what to do?

    SharmFarm wrote:
    Good ev Ning Mario49    firstly I would like to say a great thank you for your attention to trying to help me,,,,,    i have looked at the links and will try everything stated first thing…
    Hi Mario,,,,
    I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
    I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
    Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
    Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
    Please advise,???
    I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
    Thank you again
    D

Maybe you are looking for

  • Cursor snap to point in XY graph

    I have trouble in LabWindows/CVI 5.0 to have my cursor snap to a point in an XY- graph, even when I set following attributes: ATTR_PLOT_SNAPPABLE : TRUE ATTR_CURSOR_MODE : VAL_SNAP_TO_POINT Besides, also the attribute ATTR_ENABLE_ZOOMING seems not to

  • T440p HotKeys F5, F6, F7

    I am running Win 7 on a new T440p.   I can't connect to a projector using F7 nor are the brightness controls working (F5 and F6).  The other HotKeys are working.  I have updated to the latest HotKey driver.  Any idea how I get this fixed? Solved! Go

  • Oracle Table Storage Parameters - a nice reading

    bold Gony's reading excercise for 07/09/2009 bold - The below is from the web source http://www.praetoriate.com/t_%20tuning_storage_parameters.htm. Very good material.The notes refers to figures and diagrams which cannot be seen below. But the text b

  • File sharing missing with ios 6 on ipad

    Airplay and file sharing missing on iPad 2 after installing IOS 6.

  • Most stable version of E-Business Suite R12

    Dear all, can anyone tell me which is the most stable version of R12? Currently i am installing R12.1.1 for product purpose. Do you suggest that I should upgrade to R12.1.3 for production environment? thanks & warm regards, YC