Itunes radio drops connection after commercial

Since the newest update iTunes radio drops connection after almost every commercial - sometimes, though rarely, after a song. I solve the problem by changing radio stations and then to switch back to the previous one or restart iTunes. Does anyone have and better solutions? Thanks.

Yep, it does, and sometimes you even have to sign out of your iTunes Store account and back in to be able to play any station once this stoppage occurs. There's no fix a user can implement that I have ever found. It's a server issue that Apple will have to fix.
Regards.

Similar Messages

I use iTunes Radio via AppleTV - after I've been connected and listening for a few minutes, the TV will sych with the camera roll on my daugter's iTouch (but the music keeps playing). How do I prevent this?

I use iTunes Radio via AppleTV - after I've been connected and listening a few minutes, the TV will snych with my daughter's iTouch camera roll (but the music will keep playing)? How do I prevent this?

How do I prevent this?
Set a password or onscreen code for Airplay to the Apple TV:
Settings > AirPlay > Onscreen Code > On
Settings > AirPlay > Password > [set password]
http://support.apple.com/kb/ht5517

Just got my ATV2 and the stream from my win 7 Itunes library drops out after 30min or when changing movies.

just got my ATV2 and the stream from my win 7 Itunes library drops out after 30min of when changing movies. I have to turn off and turn on home share to stream again. Should i return all my apple products and go android instead....help, I want it to work. My firewall is off, ATV2 is running on ethernet and library is on wireless. My ps3 streams just fine over the network, I assume Itunes is at fault?

Please any one who comes across this and shares in my fustrations please click below and lodge a complaint. There is no solution to the dropouts until apple sorts it...Lets get the message across loud and clear
http://www.apple.com/feedback/appletv.html

ITunes radio starts playing after I check email. What can I do to stop that from happening. It is a nuisance to open iTunes and pause the song playing.

On my iPhone 5c, after I check email or other apps not related to phone use, frequently iTunes radio starts playing. I have learned to open app and pause the song being played. Is there a way to not have that happen?

HI,
Most likely this is the server end and may improve on changing ports
https://discussions.apple.com/thread/4749776?tstart=0
8:59 PM Tuesday; January 29, 2013
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

2.1 ghz 667 mhz airport drops connection after snow install

installed snow 10.6.8 airport extreme and express airtunes drop connection or has weak connection must restart

I have shown the problem to the Genius Bar several times. The great people at the Genius Bar know there is a problem, but they are not getting the answers/solutions they need from corporate.
I believe that Apple Corporate has decided that it is more important to have Steve "market" some new ideas at upcoming developer meeting then to make its existing users happy by solving this problems. Many of us who have been loyal MAC users since the 1980's are being "screwed".
If Steve does not to continue to "razzle and dazzle" at these announcements the Stock Market Analysis get crabby and whinny and say that "Apple" is "bad". Which we know is wrong!!! So us users are held at bay so a big announcement can make the stock analysis happy.
Another American company is afraid of being bushwhacked by the "Mental Midget" Stock Market Analysis who thinks "they" control the economy. People, AMERICANS control the market. Our ingenuity and creativity have and always made this country great, not some "Mental Midget Stock analysis who lacks ethics and morals and filled with self-centered greed think that THEY control the economy.
Over the last 20 years the "Mental Midgets" anylsis have done more to screw up the country the the elected officials. These "MM" anlysis need to get out into the real world and see how they have screwed up our economy!!!!!!!!!!
I think I am a little upset, what do you think????

[SOLVED] RT2870 drops connection after pacman update

Since last pacman upgrade my USB wireless works for just a few seconds while used; while watching transfer speed I see at first full speed and then going slower and slower and in a few secs totally stopped, without being disconnected. I have to reboot to get it working again (worked sometimes by ip link set wlan 0 down & up)
No difference using Wicd or networkmanager.
I have never had any issues earlier even since Kernel 3.0.
Linksys router with standard WPA2 configuration, other computers in house connecting without problems.
lsusb:
D-Link System DWA-140 RangeBooster N Adapter(rev.B1) [Ralink RT2870]
uname -r
3.2.8-1-ARCH
I've tried blacklisting all the kernel rt2800usb modules which supposedly have taken over specific Realtek drivers according to wiki
https://wiki.archlinux.org/index.php/Wi … and_rt2870
with no effect.
Tried killing wpa_supplicant (only found one instance though) as suggested on some blogpost but no effect.
Tried the proprietary rt2870sta driver as suggested in Wiki
https://wiki.archlinux.org/index.php/Rt2870
-got a working link on ra0 but it wouldn't connect to WiFi (kept asking for password).
More debug info:
lsmod | grep rt > lsmod.txt
exportfs 3695 1 nfsd
rt2800usb 14400 0
rt2x00usb 9076 1 rt2800usb
rt2800lib 40260 1 rt2800usb
rt2x00lib 35183 3 rt2800lib,rt2x00usb,rt2800usb
crc_ccitt 1363 1 rt2800lib
mac80211 228527 3 rt2x00lib,rt2800lib,rt2x00usb
cfg80211 172260 2 mac80211,rt2x00lib
iTCO_vendor_support 1961 1 iTCO_wdt
usbcore 146241 7 ehci_hcd,uhci_hcd,usbhid,rt2x00usb,rt2800usb,usblp
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.8-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20120120 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Feb 27 21:51:46 CET 2012
[ 0.000000] Command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff70000 (usable)
[ 0.000000] BIOS-e820: 00000000cff70000 - 00000000cff7e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cff7e000 - 00000000cffd0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: System manufacturer P5Q SE/P5Q SE, BIOS 0502 08/20/2008
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-DFFFF write-protect
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcff70 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cff70000
[ 0.000000] 0000000000 - 00cfe00000 page 2M
[ 0.000000] 00cfe00000 - 00cff70000 page 4k
[ 0.000000] kernel direct mapping tables up to cff70000 @ 1fffa000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ cff6a000-cff70000
[ 0.000000] RAMDISK: 37d76000 - 37ff0000
[ 0.000000] ACPI: RSDP 00000000000fb2c0 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 00000000cff70100 0005C (v01 A_M_I_ OEMXSDT 08000820 MSFT 00000097)
[ 0.000000] ACPI: FACP 00000000cff70290 000F4 (v03 A_M_I_ OEMFACP 08000820 MSFT 00000097)
[ 0.000000] ACPI: DSDT 00000000cff70440 0907C (v01 A0985 A0985001 00000001 INTL 20051117)
[ 0.000000] ACPI: FACS 00000000cff7e000 00040
[ 0.000000] ACPI: APIC 00000000cff70390 0006C (v01 A_M_I_ OEMAPIC 08000820 MSFT 00000097)
[ 0.000000] ACPI: MCFG 00000000cff70400 0003C (v01 A_M_I_ OEMMCFG 08000820 MSFT 00000097)
[ 0.000000] ACPI: OEMB 00000000cff7e040 00081 (v01 A_M_I_ AMI_OEM 08000820 MSFT 00000097)
[ 0.000000] ACPI: HPET 00000000cff794c0 00038 (v01 A_M_I_ OEMHPET 08000820 MSFT 00000097)
[ 0.000000] ACPI: OSFR 00000000cff79500 000B0 (v01 A_M_I_ OEMOSFR 08000820 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000cff7e5d0 00A7C (v01 DpgPmm CpuPm 00000012 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cff70
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1048319
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3914 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 831408 pages, LIFO batch:31
[ 0.000000] Normal zone: 3072 pages used for memmap
[ 0.000000] Normal zone: 193536 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cff70000 - 00000000cff7e000
[ 0.000000] PM: Registered nosave memory: 00000000cff7e000 - 00000000cffd0000
[ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000
[ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
[ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012fc00000 s82176 r8192 d24320 u524288
[ 0.000000] pcpu-alloc: s82176 r8192 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028858
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=/dev/disk/by-uuid/ce706691-4517-477c-a42d-417ab8ffef38 loglevel=3 ro quiet resume=/dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0 nomodeset
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 4047500k/4980736k available (4488k kernel code, 787460k absent, 145776k reserved, 4409k data, 736k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 33554432 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2997.032 MHz processor.
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 5996.81 BogoMIPS (lpj=9990106)
[ 0.003340] pid_max: default: 32768 minimum: 301
[ 0.003361] Security Framework initialized
[ 0.003367] AppArmor: AppArmor disabled by boot time parameter
[ 0.006673] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.008366] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009152] Mount-cache hash table entries: 256
[ 0.009284] Initializing cgroup subsys cpuacct
[ 0.009289] Initializing cgroup subsys memory
[ 0.009297] Initializing cgroup subsys devices
[ 0.009298] Initializing cgroup subsys freezer
[ 0.009300] Initializing cgroup subsys net_cls
[ 0.009302] Initializing cgroup subsys blkio
[ 0.009332] CPU: Physical Processor ID: 0
[ 0.009333] CPU: Processor Core ID: 0
[ 0.009335] mce: CPU supports 6 MCE banks
[ 0.009342] CPU0: Thermal monitoring enabled (TM2)
[ 0.009346] using mwait in idle threads.
[ 0.010343] ACPI: Core revision 20110623
[ 0.013339] ftrace: allocating 17394 entries in 69 pages
[ 0.017049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.050789] CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 06
[ 0.053330] APIC calibration not consistent with PM-Timer: 97ms instead of 100ms
[ 0.053330] APIC delta adjusted to PM-Timer: 2081243 (2020688)
[ 0.053330] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.053330] ... version: 2
[ 0.053330] ... bit width: 40
[ 0.053330] ... generic registers: 2
[ 0.053330] ... value mask: 000000ffffffffff
[ 0.053330] ... max period: 000000007fffffff
[ 0.053330] ... fixed-purpose events: 3
[ 0.053330] ... event mask: 0000000700000003
[ 0.070123] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.096675] Booting Node 0, Processors #1
[ 0.096678] smpboot cpu 1: start_ip = 9a000
[ 0.193349] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.199992] Brought up 2 CPUs
[ 0.199995] Total of 2 processors activated (11992.51 BogoMIPS).
[ 0.202833] devtmpfs: initialized
[ 0.203768] PM: Registering ACPI NVS region at cff7e000 (335872 bytes)
[ 0.203929] print_constraints: dummy:
[ 0.203965] NET: Registered protocol family 16
[ 0.204054] ACPI: bus type pci registered
[ 0.204105] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.204107] PCI: not using MMCONFIG
[ 0.204109] PCI: Using configuration type 1 for base access
[ 0.204490] bio: create slab <bio-0> at 0
[ 0.204490] ACPI: Added _OSI(Module Device)
[ 0.204490] ACPI: Added _OSI(Processor Device)
[ 0.204490] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.204490] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.204490] ACPI: EC: Look up EC in DSDT
[ 0.206720] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.211061] ACPI: SSDT 00000000cff7e0d0 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.211260] ACPI: Dynamic OEM Table Load:
[ 0.211262] ACPI: SSDT (null) 00277 (v01 DpgPmm P001Ist 00000011 INTL 20051117)
[ 0.211420] ACPI: SSDT 00000000cff7e350 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.211621] ACPI: Dynamic OEM Table Load:
[ 0.211623] ACPI: SSDT (null) 00277 (v01 DpgPmm P002Ist 00000012 INTL 20051117)
[ 0.211740] ACPI: Interpreter enabled
[ 0.211743] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.211758] ACPI: Using IOAPIC for interrupt routing
[ 0.211772] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.212438] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.246853] ACPI: No dock devices found.
[ 0.246855] HEST: Table not found.
[ 0.246858] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.246900] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.246996] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.246998] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.247000] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.247001] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
[ 0.247003] pci_root PNP0A08:00: host bridge window [mem 0xd0000000-0xffffffff]
[ 0.247012] pci 0000:00:00.0: [8086:2e20] type 0 class 0x000600
[ 0.247043] pci 0000:00:01.0: [8086:2e21] type 1 class 0x000604
[ 0.247071] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.247074] pci 0000:00:01.0: PME# disabled
[ 0.247103] pci 0000:00:1a.0: [8086:3a37] type 0 class 0x000c03
[ 0.247137] pci 0000:00:1a.0: reg 20: [io 0xc800-0xc81f]
[ 0.247179] pci 0000:00:1a.1: [8086:3a38] type 0 class 0x000c03
[ 0.247213] pci 0000:00:1a.1: reg 20: [io 0xc880-0xc89f]
[ 0.247254] pci 0000:00:1a.2: [8086:3a39] type 0 class 0x000c03
[ 0.247288] pci 0000:00:1a.2: reg 20: [io 0xcc00-0xcc1f]
[ 0.247336] pci 0000:00:1a.7: [8086:3a3c] type 0 class 0x000c03
[ 0.247354] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
[ 0.247428] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.247432] pci 0000:00:1a.7: PME# disabled
[ 0.247451] pci 0000:00:1b.0: [8086:3a3e] type 0 class 0x000403
[ 0.247463] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
[ 0.247516] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.247519] pci 0000:00:1b.0: PME# disabled
[ 0.247535] pci 0000:00:1c.0: [8086:3a40] type 1 class 0x000604
[ 0.247589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.247592] pci 0000:00:1c.0: PME# disabled
[ 0.247614] pci 0000:00:1c.5: [8086:3a4a] type 1 class 0x000604
[ 0.247669] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.247672] pci 0000:00:1c.5: PME# disabled
[ 0.247690] pci 0000:00:1d.0: [8086:3a34] type 0 class 0x000c03
[ 0.247724] pci 0000:00:1d.0: reg 20: [io 0xc080-0xc09f]
[ 0.247766] pci 0000:00:1d.1: [8086:3a35] type 0 class 0x000c03
[ 0.247800] pci 0000:00:1d.1: reg 20: [io 0xc400-0xc41f]
[ 0.247841] pci 0000:00:1d.2: [8086:3a36] type 0 class 0x000c03
[ 0.247875] pci 0000:00:1d.2: reg 20: [io 0xc480-0xc49f]
[ 0.247924] pci 0000:00:1d.7: [8086:3a3a] type 0 class 0x000c03
[ 0.247941] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
[ 0.248016] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.248019] pci 0000:00:1d.7: PME# disabled
[ 0.248035] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.248084] pci 0000:00:1f.0: [8086:3a18] type 0 class 0x000601
[ 0.248181] pci 0000:00:1f.2: [8086:3a20] type 0 class 0x000101
[ 0.248193] pci 0000:00:1f.2: reg 10: [io 0xb000-0xb007]
[ 0.248199] pci 0000:00:1f.2: reg 14: [io 0xac00-0xac03]
[ 0.248205] pci 0000:00:1f.2: reg 18: [io 0xa880-0xa887]
[ 0.248212] pci 0000:00:1f.2: reg 1c: [io 0xa800-0xa803]
[ 0.248218] pci 0000:00:1f.2: reg 20: [io 0xa480-0xa48f]
[ 0.248224] pci 0000:00:1f.2: reg 24: [io 0xa400-0xa40f]
[ 0.248262] pci 0000:00:1f.3: [8086:3a30] type 0 class 0x000c05
[ 0.248274] pci 0000:00:1f.3: reg 10: [mem 0xf9fff400-0xf9fff4ff 64bit]
[ 0.248290] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
[ 0.248317] pci 0000:00:1f.5: [8086:3a26] type 0 class 0x000101
[ 0.248328] pci 0000:00:1f.5: reg 10: [io 0xc000-0xc007]
[ 0.248335] pci 0000:00:1f.5: reg 14: [io 0xbc00-0xbc03]
[ 0.248341] pci 0000:00:1f.5: reg 18: [io 0xb880-0xb887]
[ 0.248347] pci 0000:00:1f.5: reg 1c: [io 0xb800-0xb803]
[ 0.248353] pci 0000:00:1f.5: reg 20: [io 0xb480-0xb48f]
[ 0.248359] pci 0000:00:1f.5: reg 24: [io 0xb400-0xb40f]
[ 0.248418] pci 0000:01:00.0: [10de:05e2] type 0 class 0x000300
[ 0.248426] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff]
[ 0.248434] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.248443] pci 0000:01:00.0: reg 1c: [mem 0xfa000000-0xfbffffff 64bit]
[ 0.248449] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f]
[ 0.248455] pci 0000:01:00.0: reg 30: [mem 0xfea80000-0xfeafffff pref]
[ 0.248497] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.248499] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.248502] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.248505] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.248536] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.248543] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.248590] pci 0000:02:00.0: [1969:1026] type 0 class 0x000200
[ 0.248610] pci 0000:02:00.0: reg 10: [mem 0xfebc0000-0xfebfffff 64bit]
[ 0.248621] pci 0000:02:00.0: reg 18: [io 0xec00-0xec7f]
[ 0.248706] pci 0000:02:00.0: PME# supported from D3hot D3cold
[ 0.248710] pci 0000:02:00.0: PME# disabled
[ 0.248728] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
[ 0.248736] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.248739] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.248742] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.248794] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode)
[ 0.248801] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.248803] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.248805] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.248807] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 0.248809] pci 0000:00:1e.0: bridge window [mem 0xd0000000-0xffffffff] (subtractive decode)
[ 0.248822] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.248885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 0.248906] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.248953] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
[ 0.248985] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
[ 0.249003] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.249005] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.249007] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.254308] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.254341] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.254373] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 12 14 *15)
[ 0.254405] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.254437] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.254469] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
[ 0.254501] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.254533] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.254589] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.254589] vgaarb: loaded
[ 0.254589] vgaarb: bridge control possible 0000:01:00.0
[ 0.254589] PCI: Using ACPI for IRQ routing
[ 0.259493] PCI: pci_cache_line_size set to 64 bytes
[ 0.259546] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.259547] reserve RAM buffer: 00000000cff70000 - 00000000cfffffff
[ 0.259624] NetLabel: Initializing
[ 0.259626] NetLabel: domain hash size = 128
[ 0.259627] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.259637] NetLabel: unlabeled traffic allowed by default
[ 0.259649] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.259653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.259656] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.270027] Switching to clocksource hpet
[ 0.274998] pnp: PnP ACPI init
[ 0.275013] ACPI: bus type pnp registered
[ 0.275071] pnp 00:00: [bus 00-ff]
[ 0.275073] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.275074] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.275076] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.275078] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.275079] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.275081] pnp 00:00: [mem 0xd0000000-0xffffffff window]
[ 0.275124] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.275131] pnp 00:01: [mem 0xfed14000-0xfed19fff]
[ 0.275167] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
[ 0.275170] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.275193] pnp 00:02: [dma 4]
[ 0.275194] pnp 00:02: [io 0x0000-0x000f]
[ 0.275196] pnp 00:02: [io 0x0081-0x0083]
[ 0.275197] pnp 00:02: [io 0x0087]
[ 0.275198] pnp 00:02: [io 0x0089-0x008b]
[ 0.275202] pnp 00:02: [io 0x008f]
[ 0.275203] pnp 00:02: [io 0x00c0-0x00df]
[ 0.275225] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.275234] pnp 00:03: [io 0x0070-0x0071]
[ 0.275243] pnp 00:03: [irq 8]
[ 0.275263] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.275269] pnp 00:04: [io 0x0061]
[ 0.275290] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.275296] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.275300] pnp 00:05: [irq 13]
[ 0.275322] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.275431] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275433] pnp 00:06: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275435] pnp 00:06: [io 0x0290-0x029f]
[ 0.275467] system 00:06: [io 0x0290-0x029f] has been reserved
[ 0.275470] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275531] pnp 00:07: [io 0x0010-0x001f]
[ 0.275533] pnp 00:07: [io 0x0022-0x003f]
[ 0.275534] pnp 00:07: [io 0x0044-0x004d]
[ 0.275536] pnp 00:07: [io 0x0050-0x005f]
[ 0.275537] pnp 00:07: [io 0x0062-0x0063]
[ 0.275538] pnp 00:07: [io 0x0065-0x006f]
[ 0.275540] pnp 00:07: [io 0x0072-0x007f]
[ 0.275541] pnp 00:07: [io 0x0080]
[ 0.275542] pnp 00:07: [io 0x0084-0x0086]
[ 0.275543] pnp 00:07: [io 0x0088]
[ 0.275545] pnp 00:07: [io 0x008c-0x008e]
[ 0.275546] pnp 00:07: [io 0x0090-0x009f]
[ 0.275547] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.275549] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.275550] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.275551] pnp 00:07: [io 0x0800-0x087f]
[ 0.275553] pnp 00:07: [io 0x0400-0x03ff disabled]
[ 0.275554] pnp 00:07: [io 0x0500-0x057f]
[ 0.275556] pnp 00:07: [mem 0xfed08000-0xfed08fff]
[ 0.275557] pnp 00:07: [mem 0xfed1c000-0xfed1ffff]
[ 0.275558] pnp 00:07: [mem 0xfed20000-0xfed3ffff]
[ 0.275560] pnp 00:07: [mem 0xfed50000-0xfed8ffff]
[ 0.275610] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.275612] system 00:07: [io 0x0800-0x087f] has been reserved
[ 0.275614] system 00:07: [io 0x0500-0x057f] has been reserved
[ 0.275616] system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.275618] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.275620] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.275622] system 00:07: [mem 0xfed50000-0xfed8ffff] has been reserved
[ 0.275625] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275666] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.275690] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.275722] pnp 00:09: [mem 0xffb00000-0xffbfffff]
[ 0.275724] pnp 00:09: [mem 0xfff00000-0xffffffff]
[ 0.275745] pnp 00:09: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.275772] pnp 00:0a: [mem 0xffc00000-0xffefffff]
[ 0.275807] system 00:0a: [mem 0xffc00000-0xffefffff] has been reserved
[ 0.275809] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275845] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275847] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled]
[ 0.275848] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
[ 0.275850] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
[ 0.275885] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.275887] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.275889] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.275908] pnp 00:0c: [io 0x0060]
[ 0.275909] pnp 00:0c: [io 0x0064]
[ 0.275915] pnp 00:0c: [irq 1]
[ 0.275945] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.276048] pnp 00:0d: [mem 0xe0000000-0xefffffff]
[ 0.276083] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.276086] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.276183] pnp 00:0e: [mem 0x00000000-0x0009ffff]
[ 0.276185] pnp 00:0e: [mem 0x000c0000-0x000cffff]
[ 0.276187] pnp 00:0e: [mem 0x000e0000-0x000fffff]
[ 0.276188] pnp 00:0e: [mem 0x00100000-0xcfffffff]
[ 0.276190] pnp 00:0e: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.276230] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.276232] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.276234] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.276236] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved
[ 0.276238] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.276322] pnp: PnP ACPI: found 15 devices
[ 0.276323] ACPI: ACPI bus type pnp unregistered
[ 0.282821] PCI: max bus depth: 1 pci_try_num: 2
[ 0.282845] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.282848] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf0200000-0xf05fffff]
[ 0.282851] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.282853] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.282855] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.282857] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfeafffff]
[ 0.282860] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.282863] pci 0000:00:1c.0: PCI bridge to [bus 03-03]
[ 0.282865] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.282869] pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf05fffff]
[ 0.282872] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.282877] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
[ 0.282879] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff]
[ 0.282882] pci 0000:00:1c.5: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.282885] pci 0000:00:1c.5: bridge window [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.282890] pci 0000:00:1e.0: PCI bridge to [bus 04-04]
[ 0.282906] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.282909] pci 0000:00:01.0: setting latency timer to 64
[ 0.282913] pci 0000:00:1c.0: enabling device (0106 -> 0107)
[ 0.282919] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.282922] pci 0000:00:1c.0: setting latency timer to 64
[ 0.282926] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.282929] pci 0000:00:1c.5: setting latency timer to 64
[ 0.282934] pci 0000:00:1e.0: setting latency timer to 64
[ 0.282937] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.282938] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.282940] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.282942] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.282943] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.282945] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.282947] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfeafffff]
[ 0.282949] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.282950] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.282952] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf05fffff]
[ 0.282954] pci_bus 0000:03: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
[ 0.282956] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.282957] pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.282959] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf01fffff 64bit pref]
[ 0.282961] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7]
[ 0.282962] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff]
[ 0.282964] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.282966] pci_bus 0000:04: resource 7 [mem 0x000d0000-0x000dffff]
[ 0.282967] pci_bus 0000:04: resource 8 [mem 0xd0000000-0xffffffff]
[ 0.282994] NET: Registered protocol family 2
[ 0.283102] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.283911] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.286830] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.287221] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.287223] TCP reno registered
[ 0.287231] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.287261] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.287380] NET: Registered protocol family 1
[ 0.287533] pci 0000:01:00.0: Boot video device
[ 0.287538] PCI: CLS 32 bytes, default 64
[ 0.287587] Unpacking initramfs...
[ 0.316854] Freeing initrd memory: 2536k freed
[ 0.317344] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.317346] Placing 64MB software IO TLB between ffff8800cbf6a000 - ffff8800cff6a000
[ 0.317348] software IO TLB at phys 0xcbf6a000 - 0xcff6a000
[ 0.317656] audit: initializing netlink socket (disabled)
[ 0.317668] type=2000 audit(1331070636.316:1): initialized
[ 0.329229] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.351410] VFS: Disk quotas dquot_6.5.2
[ 0.351460] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.351537] msgmni has been set to 7910
[ 0.351674] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.351694] io scheduler noop registered
[ 0.351696] io scheduler deadline registered
[ 0.351723] io scheduler cfq registered (default)
[ 0.351807] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.351832] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.351871] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.351899] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.351947] pcieport 0000:00:1c.5: setting latency timer to 64
[ 0.351975] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.352104] intel_idle: MWAIT substates: 0x22220
[ 0.352105] intel_idle: does not run on family 6 model 23
[ 0.352132] ERST: Table is not found!
[ 0.352133] GHES: HEST is not enabled!
[ 0.352190] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.423563] Linux agpgart interface v0.103
[ 0.423624] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.423626] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.424352] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.424437] mousedev: PS/2 mouse device common for all mice
[ 0.424487] rtc_cmos 00:03: RTC can wake from S4
[ 0.424570] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.424591] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.424600] cpuidle: using governor ladder
[ 0.424601] cpuidle: using governor menu
[ 0.424761] TCP cubic registered
[ 0.424857] NET: Registered protocol family 10
[ 0.425184] NET: Registered protocol family 17
[ 0.425187] Registering the dns_resolver key type
[ 0.425287] PM: Checking hibernation image partition /dev/disk/by-uuid/5a94d96e-0fdd-425a-91c5-6fe96da349f0
[ 0.442444] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.442457] PM: Hibernation image not present or could not be loaded.
[ 0.442463] registered taskstats version 1
[ 0.453068] rtc_cmos 00:03: setting system clock to 2012-03-06 21:50:37 UTC (1331070637)
[ 0.453104] Initializing network drop monitor service
[ 0.454145] Freeing unused kernel memory: 736k freed
[ 0.454268] Write protecting the kernel read-only data: 8192k
[ 0.458421] Freeing unused kernel memory: 1636k freed
[ 0.460355] Freeing unused kernel memory: 660k freed
[ 0.465585] udevd[37]: starting version 181
[ 0.489348] usbcore: registered new interface driver usbfs
[ 0.489369] usbcore: registered new interface driver hub
[ 0.490707] usbcore: registered new device driver usb
[ 0.492744] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.492777] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.492811] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 0.492815] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 0.492852] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 0.492879] ehci_hcd 0000:00:1a.7: debug port 1
[ 0.497714] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.497902] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 0.497918] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
[ 0.500931] SCSI subsystem initialized
[ 0.504356] libata version 3.00 loaded.
[ 0.510015] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 0.510276] hub 1-0:1.0: USB hub found
[ 0.510280] hub 1-0:1.0: 6 ports detected
[ 0.510367] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.510390] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.510393] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.510401] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.510423] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.514289] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.514303] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
[ 0.526698] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.526921] hub 2-0:1.0: USB hub found
[ 0.526924] hub 2-0:1.0: 6 ports detected
[ 0.527005] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.527010] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 0.527013] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 0.527021] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.527047] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c800
[ 0.527239] hub 3-0:1.0: USB hub found
[ 0.527243] hub 3-0:1.0: 2 ports detected
[ 0.527303] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.527308] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 0.527310] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 0.527316] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 0.527341] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c880
[ 0.527491] hub 4-0:1.0: USB hub found
[ 0.527494] hub 4-0:1.0: 2 ports detected
[ 0.527547] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.527552] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 0.527554] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 0.527560] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 0.527579] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000cc00
[ 0.527671] hub 5-0:1.0: USB hub found
[ 0.527673] hub 5-0:1.0: 2 ports detected
[ 0.527725] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.527729] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.527731] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.527737] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.527755] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c080
[ 0.527850] hub 6-0:1.0: USB hub found
[ 0.527853] hub 6-0:1.0: 2 ports detected
[ 0.527912] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.527916] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.527918] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.527925] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 0.527950] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000c400
[ 0.528041] hub 7-0:1.0: USB hub found
[ 0.528044] hub 7-0:1.0: 2 ports detected
[ 0.528095] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.528099] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.528102] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.528107] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 0.528126] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c480
[ 0.528217] hub 8-0:1.0: USB hub found
[ 0.528220] hub 8-0:1.0: 2 ports detected
[ 0.528277] ata_piix 0000:00:1f.2: version 2.13
[ 0.528284] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.528288] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.528322] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 0.528959] scsi0 : ata_piix
[ 0.529039] scsi1 : ata_piix
[ 0.529777] ata1: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa480 irq 19
[ 0.529781] ata2: SATA max UDMA/133 cmd 0xa880 ctl 0xa800 bmdma 0xa488 irq 19
[ 0.529808] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.529812] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.529848] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 0.530605] scsi2 : ata_piix
[ 0.531122] scsi3 : ata_piix
[ 0.531716] ata3: SATA max UDMA/133 cmd 0xc000 ctl 0xbc00 bmdma 0xb480 irq 19
[ 0.531719] ata4: SATA max UDMA/133 cmd 0xb880 ctl 0xb800 bmdma 0xb488 irq 19
[ 0.833346] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 0.860625] ata3: SATA link down (SStatus 0 SControl 300)
[ 0.871253] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.133351] usb 2-5: new high-speed USB device number 4 using ehci_hcd
[ 1.320013] Refined TSC clocksource calibration: 2996.999 MHz.
[ 1.320019] Switching to clocksource tsc
[ 1.326723] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.326735] ata2.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.326848] ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.326858] ata1.01: SATA link down (SStatus 0 SControl 300)
[ 1.334172] ata1.00: ATA-7: WDC WD740ADFD-00NLR1, 20.07P20, max UDMA/133
[ 1.334175] ata1.00: 145226112 sectors, multi 16: LBA48 NCQ (not used)
[ 1.347438] ata1.00: configured for UDMA/133
[ 1.347545] scsi 0:0:0:0: Direct-Access ATA WDC WD740ADFD-00 20.0 PQ: 0 ANSI: 5
[ 1.356883] ata2.00: ATA-7: SAMSUNG HD321KJ, CP100-05, max UDMA7
[ 1.356887] ata2.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.371850] ata2.01: HPA detected: current 1465147055, native 1465149168
[ 1.371855] ata2.01: ATA-8: WDC WD7500AACS-00ZJB0, 01.01B01, max UDMA/133
[ 1.371858] ata2.01: 1465147055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 1.376886] ata2.00: configured for UDMA/133
[ 1.390777] ata2.01: configured for UDMA/133
[ 1.390856] scsi 1:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5
[ 1.390990] scsi 1:0:1:0: Direct-Access ATA WDC WD7500AACS-0 01.0 PQ: 0 ANSI: 5
[ 1.393373] sd 0:0:0:0: [sda] 145226112 512-byte logical blocks: (74.3 GB/69.2 GiB)
[ 1.393409] sd 0:0:0:0: [sda] Write Protect is off
[ 1.393411] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.393427] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.393753] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.393840] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.393843] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.393860] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.394066] sd 1:0:1:0: [sdc] 1465147055 512-byte logical blocks: (750 GB/698 GiB)
[ 1.404247] sdb: sdb2
[ 1.404286] sd 1:0:1:0: [sdc] Write Protect is off
[ 1.404290] sd 1:0:1:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.404316] sd 1:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.410206] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.410713] sdc: sdc1
[ 1.412675] sd 1:0:1:0: [sdc] Attached SCSI disk
[ 1.414632] sda: sda1 sda2 sda3
[ 1.414890] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.483346] usb 7-1: new low-speed USB device number 2 using uhci_hcd
[ 1.675206] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input1
[ 1.675328] generic-usb 0003:046D:C01E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1/input0
[ 1.675340] usbcore: registered new interface driver usbhid
[ 1.675341] usbhid: USB HID core driver
[ 1.847718] PM: Starting manual resume from disk
[ 1.847720] PM: Hibernation image partition 8:2 present
[ 1.847721] PM: Looking for hibernation image.
[ 1.847851] PM: Image not found (code -22)
[ 1.847854] PM: Hibernation image not present or could not be loaded.
[ 1.887347] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.955372] udevd[142]: starting version 181
[ 3.102653] FS-Cache: Loaded
[ 3.138386] RPC: Registered named UNIX socket transport module.
[ 3.138388] RPC: Registered udp transport module.
[ 3.138390] RPC: Registered tcp transport module.
[ 3.138391] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 3.206448] FS-Cache: Netfs 'nfs' registered for caching
[ 3.340426] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 3.340433] ACPI: Power Button [PWRB]
[ 3.340480] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.340483] ACPI: Power Button [PWRF]
[ 3.367741] iTCO_vendor_support: vendor-support=0
[ 3.368037] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 3.368042] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x400-0x40f]
[ 3.368043] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.420207] ATL1E 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 3.420218] ATL1E 0000:02:00.0: setting latency timer to 64
[ 3.460984] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.646986] nvidia: module license 'NVIDIA' taints kernel.
[ 3.646990] Disabling lock debugging due to kernel taint
[ 3.658130] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 3.658258] iTCO_wdt: Found a ICH10 TCO device (Version=2, TCOBASE=0x0860)
[ 3.658557] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.808444] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.808451] nvidia 0000:01:00.0: setting latency timer to 64
[ 3.808456] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 3.808546] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 295.20 Mon Feb 6 21:07:30 PST 2012
[ 3.922194] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.922239] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 3.922258] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.964505] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 4.187852] cfg80211: Calling CRDA to update world regulatory domain
[ 4.420014] usb 2-1: reset high-speed USB device number 2 using ehci_hcd
[ 4.487427] usblp0: USB Bidirectional printer dev 4 if 0 alt 0 proto 2 vid 0x04A9 pid 0x10B6
[ 4.487464] usbcore: registered new interface driver usblp
[ 4.597153] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.597522] Registered led device: rt2800usb-phy0::radio
[ 4.597538] Registered led device: rt2800usb-phy0::assoc
[ 4.597553] Registered led device: rt2800usb-phy0::quality
[ 4.597572] usbcore: registered new interface driver rt2800usb
[ 4.896528] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 4.931213] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.962285] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.004187] Adding 8279036k swap on /dev/sda2. Priority:-1 extents:1 across:8279036k
[ 5.887306] Installing knfsd (copyright (C) 1996 [email protected]).
[ 36.076486] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 36.077062] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 50.139089] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 53.445833] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 53.490782] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 53.491333] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 53.732458] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 57.151881] wlan0: authenticate with c0:c1:c0:36:e7:5d (try 1)
[ 57.153391] wlan0: authenticated
[ 57.170628] wlan0: associate with c0:c1:c0:36:e7:5d (try 1)
[ 57.174138] wlan0: RX AssocResp from c0:c1:c0:36:e7:5d (capab=0x411 status=0 aid=1)
[ 57.174142] wlan0: associated
[ 57.197936] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 57.264846] Intel AES-NI instructions are not detected.
[ 67.456668] wlan0: no IPv6 routers present
[ 306.299972] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 306.300485] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 310.963856] wlan0: deauthenticating from c0:c1:c0:36:e7:5d by local choice (reason=3)
[ 311.091991] cfg80211: Calling CRDA to update world regulatory domain
[ 311.342430] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 313.239060] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 314.375684] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 314.545703] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 314.545818] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 314.581962] ATL1E 0000:02:00.0: irq 44 for MSI/MSI-X
[ 314.582102] ATL1E 0000:02:00.0: eth0: NIC Link is Up <100 Mbps Full Duplex>
[ 314.582703] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 314.583112] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 325.469976] eth0: no IPv6 routers present
Last edited by dabbi2000 (2012-03-07 22:57:16)

certainly didn't expect this... turned off power saving
iwconfig wlan0 power off
and all is well again. Surely doesn't explain why it started after kernel update. But it works...

ITunes Radio drops out

My iTunes often cuts out (abrupt interruptions in music stream), especially the radio portion. I just updated from a PowerBook G4 to a Macbook. i use a linysys cable modem and an airport extreme base station and connect to my stereo through airport express. i have seen others talk about the drop out problem. does anyone have a good solution?

Radio streams can drop out for a myriad of reasons, only a few of which are under your control. For example, the server sending out the stream is overloaded.
On your end of things you can try a couple different settings in QuickTime and in iTunes.
First, in QuickTime, make sure the Streaming speed setting matches or is one step SLOWER than the actual connection speed offered by your ISP. Restart iTunes and see how it performs.
In addition, iTunes has one setting that can affect streaming performance. My best recommendation is try each of the settings separately and see which works best for your system. The setting is in Preferences -> Advanced -> General -> Steaming Buffer Size

Time Machine backup on MBA 13" drop connection after a while

Nov 2010 MBA 13", OS X 10.6.7 (latest)
2008 Time Capsule, Firmware 7.5.2 (latest)
Since a while ago, possibly 10.6.7 patch, my MBA has had problems maintaining a wireless connection both to my TC and to an Airport Express that I have, especially when left unattended for 10' or so. My Iphone 4 and a Vista PC on the same network never had a similar problem.
Genius Bar folks ran hardware tests which showed nothing, then suggested a clean install and app migration (without network settings) which I did. For a day or so my MBA then starting to behave well.
Since yesterday, when I reinstalled 10.6.7, my MBA doesn't drop the connection, but has another problem. It won't finish its wireless Time Machine backup (3.6GB). Sometimes it can't find the TC disk, others it can. Then it goes ok for a while, even sometimes 2/3 of the way and then drops the internet connection and the connection to TC, but the Airport binding to the TC still shows as active on the MBA menubar. If I turn the Airport interface off and back on again on the MBA, eventually after a while it might find the wireless network again.
The only other internet-related app running in the background is Skype 5.1.0.914 (latest). Also, TC network channel is not shared with any other wireless close by.
I strongly believe this is a problem with the latest OS X patch (10.6.7) and MBA/TC combination. Even while it backups ok, it seems that the backup speed is low, which points to some conflict.
Do other people have the same or a similar issue? Can Apple Support chime in, since Genius Bar suggestion didn't do much for me?
Thanks in advance.

Update:
Stopping Skype allows backups to run faster and complete normally. In fact Time Machine has never been that fast for me..
Seems the problem is gone, hopefully this might also help others.

TG797n v3 dropping connection after connecting External HDD

Hi All, I have a Seagate SRD00F2 external HDD that I'd like to network on the TG797n v3. Problem is, as soon as I connect it the whole modem starts to drop out and reboot itself. The HDD has an external power supply, but not a switch to power it up. After reading some other posts I'm concerned that this hard drive still needs USB power as well which is causing the modem to crash/reboot. Would a powered USB hub be sufficient to connect the two devices, or do I need to change my external hard drive? Product suggestions would be appreciated.

hey , Thats' a 2 TB harddrive, right? Which of the ports on the TG797 do you have it connected to - the back, or the side? I'm a tad confused, because the Seagate has it's own power supply, and you should not need a powered hub as well. I know some people have had issues, because IIRC, this is a USB3 drive. So some steps I suggest - run a test on the Seagate drive by connecting it to a PC and run the Seagate diagnostics (download them from Seagate), just to eliminate the drive as havig an issueTry a different port on the ModemTry a different USB drive as well, as I doubt the modem will like the separate hub, for instance As an aside, after the modem reboots, does it "see" the Seagate drive, or does the TGN797 continue to misbehave?

N79 Internet Radio drops connection, interrupts st...

Just recently, past couple of weeks, Internet Radio stops playing stream after about 30 seconds or less. Sometimes it says "Buffering..." or "Connecting...", but more often it simply stops (as if I had pressed "Stop"), and I have to press the center key to restart the stream.
This happens every time I listen to Internet Radio via 3G (or 3.5G, as it indicates). Previously I was also noticing same dropouts when using WLAN connection, but that seems to have stopped happening (for the time being).
I am using AT&T network in USA, n79, firmware 30.019, Nokia Internet Radio installed from file: "iRApp_S60_323_1_16_upgrade.sis", which was specifically recommended by Nokia for the n79. Previous version of Internet Radio had same problem, but starting only recently. In exact same place at same time, phone receives smooth transmission from YouTube app without dropouts, so I don't think it's network-dropout related.
The Internet Radio is an app I use every day, so I would greatly appreciate any help!
Thanks.

kurtkaufman wrote:
more often it simply stops (as if I had pressed "Stop"), and I have to press the center key to restart the stream.
Why don't Internet radio players reconnect automatically when the connection is lost? Surely loss of the connection can be detected. All of the players seem to be based on the same code written by someone with contempt for the listener.

Airport Express drops connection after two minutes

Configuration:
Airport Express 7.4.1
iMac running OS X 10.5.6
Windows XP laptop (Sony)
Windows Vista Home (Dell)
Windows XP (Packard Bell DOT.NL netbook)
All computers are connecting smoothly through the AEX except the Packard Bell netbook. This is using an atheros AR5700EG WiFi adapter. After establishing contact with the AEX all connections will work for 2 minutes. After that, pinging the AEX is not even possible, it seams to have disappeared. XP however tells me that the connection is 100% OK.
The problem is: this machine works fine with any other WiFi access point like Linksys, Belkin etc, but not with the AEX.
Tried varying all settings in the AEX, and disabling Wireless Zero Configuration in XP, but nothing will fix the problem.

Having the same exact problem except my macbook stays connected with no drops. My toshiba laptop drops after a few minutes. the toshiba also has an Atheros wi-fi card. we tried connecting the Toshiba laptop to another AEX router and it did the same thing. AEX is conflicting either with windows vista or ths particular wi-fi card.

WiFi signal full - but drops connectivity after 8 to 9 hours - MBP 5,4

While using MBP switched on continuously @ office for 8 to 9 hours, I cannot access internet or any local network resource, while other Linux and Windows machines still can.
But when I turn the Airport off and again on, it can connect. Again after sometime the same problem comes.
Should I remove OSX and install Linux on this?

Welcome to Apple Discussions!
It would prove whether or not you are suffering some problem with the software on the Mac. It might be some damaged preference or cache file. You could also backup your data twice, and selectively restore data after testing whether or not a simple basic Mac OS X install still has the same problem. If two separate operating systems are erase and installed have issues with the router, the router setup may not have the right setup for three machines. If only one erase and installed system has an issue, then it is perhaps a firmware issue with the router. If no erase and installed system has an issue, monitor what you install after the erase and install to determine if a specific installation triggers the issue.

Wireless Keyboard frequently drops connection after MacBook repair

Just got my MacBook (1st gen, Core Duo) back from repair from an authorized service provider. They replaced the bottom and top case because of cracks. Since then my Apple Wireless Keyboard (the new one from summer '07) keeps dropping the connection every few minutes. I've never had these problems before (running 10.5.1). The weird thing is that the "connection lost" icons pops up but I can still type. Batteries are at 60% the keyboard is just a few inches away from the MacBook. Can this be related to the new top case?

Hi Benedikt!
The Bluetooth module that allows your machine to communicate with the keyboard is located almost right above the opening to your optical drive on the right-hand side of the machine. It's possible that during reassembly the sensor was not reinserted properly or the short, thin, little wire that runs to the logic board was damaged just enough to "work sometimes."
As you just received it back, I'd recommend contacting the service provider and explain the issue that you're experiencing. The other option, if you have that available to you, is to try connecting another Bluetooth device to your machine and see if it too frequently loses connection. That way you can at least further determine if it's hardware related or peripheral related.

ITunes Radio icon gone after upgrade

Lost my Radio icon and use since recent upgrade to 11.0 I have it clicked on in preferences. Nor is it disabled under "parental controls". How can I get it back?

Without knowing the exact error message about what couldn't install, I recommend installing QuickTime standalone, not regular
http://www.apple.com/quicktime/download/standalone.html
Download the isntall file to your hard drive - don't install it over the internet.
If you are running anything Norton, turn that completely off before installing.
Then install iTunes right on top of that.
There is something badly wrong with the bundled iTunes + QT install package on some people's PCs. Usually the QT standlone fixes it.

WRT54GS v6 Drops connections after 30 minutes

Almost to the second. That's my only complaint with this router. Any SSH or remote desktop sessions I have get canned. I searched and saw a post that said to try a lower MTU (1300) and change to channel 11.
I did both and didn't see a difference. Switching channels seems useless too considering this is an issue on my hardwired desktop also.
I have the latest firmware (1.51.0) and I have no clear plan on how to tackle this now.
Has anyone who's ever had this problem figured out what causes it?
-adam

I said I'd post up after I talked with someone at linksys, so...
In a nutshell I'm out of luck. They told me the issue is with the firmware and the router must be "defective." I was told to take it back to staples and return it. Not exchange, return.
I know the issue is with some setting actually in the firmware. It's a real shame that the guy on the other end of the conversation likely had no pull with the people responsible for firmware updates.
It's a nice router and a real shame. I got this one because the Netgear MIMO g I had locked up under heavy load. Turns out there were tons of people having the same problem with that one.
I miss my 5 year old netgear b only router that actually WORKED. :\

Itunes radio drops connection after commercial

Similar Messages

Maybe you are looking for