ITunes Re-Install on new hard drive

I recently had to replace my hard drive and reinstall windows 7.  My itunes library and several playlists are still on my old hard drive which is now my "D" drive.  I reinstalled iTunes 10 and when I started iTunes I held down the ALT key and tried to point to the Library.itl file but that did not work.  Any suggestion on how to get my library installes in the new iTunes program?

Click the icon to start iTunes and immediately hold down the left shift key, keep holding until asked to choose or create a library. If iTunes opens normally close and try again. Choose the iTunes folder on the external drive.
tt2

Similar Messages

  • How do I put content from my iphone back into itunes after installing a new hard drive?

    How do I put content from my iphone back into itunes after I have installed a new hard drive on my computer?

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • I had to install a new hard drive on my computer, when I downloaded itunes back onto my computer, none of my songs were there. how do i get them back??

    I had to install a new hard drive on my computer, when I downloaded Itunes, all my music was gone. How do i get my music back? I do not have an Icloud.

    Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

    I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?

    Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
    Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
    Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
    This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
    Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
    Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
    The rest of the data can be restored from the backup you made.
    Restoring: http://support.apple.com/kb/HT1414
    Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
    There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0

  • I just had to install a new hard drive, windows 7,itunes and outlooks 2010 on laptop and want to import contacts, calendars and photos. it seems sync wants to wipe out my phone with whats on the computer unidirectionally. whats the fix?

    Hi guys newbie here. My HP laptop crashed and i had to install a new hard drive, windows 7, outlook, itunes, etc. i need to get my contacts, calendars and photos off the phone and into Outlook and My Pictures. Syncing seems unidirectional PC -> iphone and i think wants to wipe out the iphone 4s with whats on the laptop - which is nothing. Need help to do this right...

    -Me again - it also won't upload the few new pictures I have on the computer onto the iPad without deleting all the photos that are already there....

  • I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes

    I had to install a new hard drive on my macbook air and now I am getting unkown error whenever I try to login to itunes. Apple support suggested I reset my password so I did that and still the problem is occuring. Itunes and the app store are working normally on my ipad and iphone. Does anyone know what the problem is. The new disk was installed in France coz I am on holiday there. could there be something I need to change in my settings? I need help urgently as I am trying to finish an assignment and need to be able to access and download from icloud.

    Hi Stacey,
    Thanks for visiting Apple Support Communities.
    You may find the tips in this article helpful with resolving the error you're seeing:
    iTunes Store: "An unknown error occurred (-9808)"
    http://support.apple.com/kb/TS2753
    Best,
    Jeremy

  • I had to install a new hard drive because my old hard drives boot files became corrupted, and i want to get all of my music files off the old hard drive and regain all my play counts/ratings/playlists

    Greetings everyone
    as the title says, ive had to install a new hard drive  and i want to transfer my old itunes library onto the new drive, maintaining all playlists/play counts/ratings etc, album artwork if possible. The old hard drive is installed as a slave drive and is completely acessible, but due to the boot files being corrupted i cannot use it as the main drive and therefore operate my old itunes. Also, my ipod no longer contains my music library as itunes synced without my permission and wiped it.
    The only thing i have tried is copying all of my old music files from the old drive by selecting 'add folder to library' and then the old drive, then replacing the new itunes library.itl file with the one from my old itunes. This restores all my playlists and playcounts but when i try to play any of the songs it says that the files could not be found, and i dont fancy locating  8500 music files individually!
    Thankyou for taking the time to read my post, any help will be greatly appreciated.

    Ah, my reply was based on the assumption that you had a default installation of iTunes.
    i.e you had all your music in the iTunes media folder inside your iTunes folder.
    If your iTunes folder is so small compared to the amount of music you have, you must have a different arrangement.
    This complicates you situation considerably.
    iTunes can cope with moving around as long as all the music is in the iTunes media folder, not not if it isn't.
    Your first step should be to get iTunes working on the old drive. This will involve editing the xml library file so that the drive letter is correct and then rebuilding the library from the xml file.
    Then you will need to consolidate your library which moves everything into the iTunes media fodler. After that you will be able to use my first suggestion.
    Step 1
    Find the iTunes folder on the old drive and copy the two library files somewhere else so you can find them again. That's iTunes Library.itl and iTunes Library.xml.
    Now open the copy of iTunes Library.xml with WordPad.
    Look for lines starting:
    Location
    These contain the paths to tracks.
    You will need to use a find/replace to change the drive letter so that it is correct.
    Make sure that you include enough in the "find" so that you only change the right thing.
    Maybe /c:/ and replace with /d:/ or whatever.
    After that, tell iTunes to use the library on the old drive with a shift key start.
    Hold down the shift key and start iTunes, keep holding the shift key until you are prompted to choose a library. Navigate to the iTunes folder on the old drive and choose iTunes Library.itl.
    Then use the method in the following article to rebuild your library;
    http://support.apple.com/kb/HT1451
    Unfortunately the date added will be today for all tracks.
    If iTunes works correctly after this, consolidate your library
    File>>Library>>Organize>>consolidate
    This copies all tracks into to iTunes media folder and could create a problem if you do not have disk space so don't do it if you are unsure about free disk space.
    Check that iTunes works OK and then use the first method.
    Message was edited by: polydorus

  • I moved iTunes and library to new Hard drive M: , now Sync is lost. Need to collect files and rebuild to proper folder.

    I installed a new hard drive and partitioned it into 2, P: Pictures: and M: Music: . I moved all my iTunes Files and Folders to the M: drive. Then when I connected my iPhone4 to iTunes it asked if I wanted to create a new sync, I said no but I seemed it couldn't find my old sync file. So I searched my computer for files and folders of iTunes and placed them all into a iTunes folder on the root of M: drive. I need to rebuild the iTunes folder correctly.
    I have all the correct items on my iPhone and haven't lost anything. Its just a problem trying to sync. Biggest problem is my music. When I try to sync music there is trouble. I can't seen to remove all music from iPhone and resync. When I thought I did iTunes would say no more music will fit. (Music is normally 70% of my memory on phone and I try and leave 1GB of 16GB free on it).
    I wan't to build the iTunes install on the D:\Program Files (x64)\  since I don't install anything on my SSD drive C: except Windows 7.

    How exactly did you move the files or more specifically, what did you move?
    The correct way to move the iTunes files is to move the ENTIRE iTunes folder (or copy it) from the original location to the new location.
    Once moved, hold Shift while launching iTunes and point it to the new location.
    If anything other than the ENTIRE iTunes folder was moved, it needs to be put back in the original location to correct the issues created then moved correctly.

  • HT1338 my 5th generation ipod won't sync anymore to my PowerMac G4.  It worked fine, but when I installed a new hard drive it won't work anymore.

    my 5th generation ipod won't sync anymore to my PowerMac G4.  It worked fine, but when I installed a new hard drive it won't work anymore.  I've re-installed iTunes, the latest version for Tiger, I've reset and restored my iPod.  The ipod shows up fine in the source banner and I can transfer files to it, however when I unplug the iPod the files are not there.

    Maybe try to repair the iPod's HD using Disk Utility located in the Applications -> Utilities folder.  If that doesn't help, try a low level reformat of the drive using the same application.  Make sure you choose Mac OS X Extended (Journaled) as the file system format.
    B-rock

  • Had to install a new hard drive on my mac book how do I get my music from my classic ipod to transfer to my new hard drive on the mac book?

    had to install a new hard drive on my mac book how do I get my music from my classic ipod to transfer to my new hard drive on the mac book?

    See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
    https://discussions.apple.com/thread/2452022?start=0&tstart=0
    B-rock

  • Itunes library - copy to new hard drive

    I have just had to install a new hard drive. I can still access my old one so have copied the contents of the itunes music folder to the new drive. Why can't I now see the contents of the itunes music folder in itunes library? Any assistance appreciated. Thank you

    Connecting a full iPod to a blank iTunes could be fatal to the iPod's music.
    No need to re-rip your music if all of it is still on the iPod....
    These links will give you several methods of recovering whatever songs remain on your iPod; some free, some third-party software, some more comprehensive for restoring playlists, ratings, playcounts, etc. Read them and their associated links before deciding on a strategy that works for you. There are many various third-party software programs that will offer a more robust process, or an easier GUI. Do a Google search for them if the links below leave you wanting…
    Don King Resurrected: Deleted files from hard drive (free user steps – music recovery only)
    MacMuse: Computer Crashed (free user steps – music recovery only)
    Copying music from iPod to computer (a primer on various methods and software)
    Copying Songs from Your iPod to a Mac or PC (resource for 3rd party software)
    iPodRip Software
    PodUtil Software
    XPlay (Software For Cross-Platform Functionality & Music Recovery)
    XPlay Photo Browser (For recovering Photos)
    After recovering your song files, strongly consider developing a thorough backup strategy for just this type of situation.
    You need at least three sets of your music:
    -- One full set on the PC within iTunes (on internal HD or ExHD)
    -- One full set on an separate external backup medium (CD/DVD/ExHD/other)
    -- One (full or partial) set on the iPod
    Music files on just the iPod and the computer is not considered having any backup. If you cannot store your complete music files on the computer, then create and maintain two external sets.
    Backup both the music files and the Library database file (iTunes Library.itl). What are the iTunes Library files?
    Here is a post on developing a backup strategy: http://discussions.apple.com/click.jspa?searchID=210939&messageID=1215125

  • I have a pavillion g42. just installed a new hard drive and the first cd. now my screenis

    Have a pavilion g42 . I just installed a new hard drive. After installing the first CD the screen is just black. What next?

    thats2odd wrote:
    I have about 300 songs missing anyway to update the folder to add the missing songs?
    If you know the location and you have all the songs in there, you could try the below:
    For iTunes 9:
    Choose File > Library > Organize Library
    For iTunes 8:
    Choose File > Library > Consolidate Library
    For iTunes 7 or earlier:
    Choose Advanced > Consolidate Library.
    A message will pop up.
    For iTunes 9:
    Place a check next to "Consolidate files" and click OK.
    For iTunes 8 and earlier:
    Click Consolidate.
    This action copies all of your music and other media files to the new location.

  • I installed a new hard drive and OS X 10.6  and now I don't have an App Store

    I had to install a new hard drive because my previous one failed.  I installed the OS X 10.6 disk that came with my laptop and almost everything is back to normal, except that I do not have an App Store and my iTunes will not connect to the iTunes store.  What can I do?  I updated my software using software updates and nothing has changed.  Please help!

    App store in added as part of 10.6.6 and later.  Make sure you have run all updates.  What version of the OS is reported using the menu item " > About this Mac"?

  • How do i install a new hard drive using time machine

    Hi there
    I have purchased a new 1TB hard drive for my Mac book pro (late 2008) model. I have time machine installaed on a seperate hard drive connected with an airport base station. I do not have the orginal snow leapoard/mountain lion OS CD or DVD. Can someone please tell me the exact steps to install the new hard drive .
    Thanks

    You haven't inserted your new hard drive yet?.
    There's two ways
    1. install yourself
    2. or pay someone to install it for you.
    If you want to do it yourself go to google and type in "install new hard drive for macbook pro". sometimes it makes a difference what model your macbook which is why i won't provide you a link just in case its the wrong one.
    Its very easy.
    1. remove all screws and the lid.
    2. remove screws from the black bracket which is holding your hard drive in place.
    3. unplug your hard drive.
    4. VERY IMPORTANT (A MISTAKE I MADE). make sure that you remove the external screws from your original hard drive as these screws are the one thing that hold and stabilise your hard drive and stop movement from happening.
    5. insert these external screws to your new hard drive (there are four screws)
    6. insert and plug your new hard drive.
    7. screw the black bracket in firmly
    8. attach lid and insert all screws firmly.

  • Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Where can I buy a larger hard drive for my late 2008, 15" macbook pro?  From reviewing questions and answers on the support community it would appear that having Apple remove the old and install the new hard drive is recommended.  But how/where?

    Welcome to Apple Support Communities
    You can install the new hard disk yourself if you want to. You just need a 2'5" SATA II hard drive, which is compatible with your MacBook Pro. You can buy one at OWC > http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/ You can filter hard drives by computer, so press a "Click to view all...", choose your computer in the sidebar and it will give you the compatible hard drives.
    There are different brands for the MacBook Pro. The most recommended are HGST and Seagate, which have good reputation. A 7200 rpm hard drive will give you extra performance

Maybe you are looking for

  • Wireless fails after pacman update

    I had my wireless functional but after the latest set of updates it somehow broke. It's a Broadcom wireless that uses the b43 driver. I wrote myself a little cheater list when I first set up the wireless. The commands appear okay but when I attempt t

  • Good quality quicktime movie looks poor when played thru Final Cut timeline

    I created a quicktime file with moving text in After Effects 6.5..when i play the movie file it looks fine..no aliasing or jagged edges on the text... when I import the .mov file into finalcut (4.5HD) and immediately launch & play it in the viewer, i

  • Putting Safari images as desktop background

    I am still somewhat new to macs, having before used Windows for a while. I know that, in Windows, when you want an internet image as your desktop background, you right-click and then select Set As Wallpaper. But, when my Mac first came, I was boggled

  • Touch Volume Keys in Fullscreen Mode

    Hi I have a Toshiba Satellite A500 02E laptop and my touch volume keys don't work in fullscreen mode.  I don't know if this is some kind of setting but it's annoying when I try and change the volume while playing games. If anyone knows how to help it

  • BB 957 - Handheld user guide needed

    I have purchased BB RIM R957M-2-5 as a PDA and need a user guide. Thank you BuzzBrad.