Itunes refuses to work correctly after update

This happens every other time I update iTunes.  I will probably not buy another Apple product if they can't even fix their most basic of systems, one needed for all the hand held devices...
I get two messages on the lastest update.  Here is one:
http://i.imgur.com/9flNI45.png
Here is the other:
http://i.imgur.com/iUgEjMM.png
How do I fix this?  I'm getting irritated that this keeps happening.  I've uninstalled and reinstalled items 5 times.  This is getting really old..

For the driver issues try Andrei Cerbu's post here, JF Fourie's post here, or see TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5, forcing a driver update.
For the other issue try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
If not try working through TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues.
Otherwise for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Similar Messages

  • Keyboard not working correctly after updating to 8.1 64bit pro.

    Keyboard not working correctly after updating to 8.1 64bit pro.
    After I updated, everything seemed ok and then all of the sudden I rebooted and only the f1 – f12 row would work. I resorted to resorted to unplugging and removing the battery and it would work for a short amount of time. This has been reported on other laptops as well, see here.
    http://answers.microsoft.com/en-us/windows/forum/w​indows8_1-hardware/windows-81-keyboard-problem-cou​...
    I think it can be solved with a driver update from hp or the keyboard builder but none is online.

    Hi,
    Please put the units product no. in the link and check if your PC is tested by HP with Windows 8.1
    http://www8.hp.com/us/en/ad/windows-8/upgrade.html
    Let me know if you need more help.
    I am an HP employee.
    Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
    ***Click on “Kudos” STAR to say thanks!***

  • Remote does not work correctly after update

    Hello,
    the subject explain it already:
    After upgrading to 2.3 the apple remote does not work correctly anymore:
    I need to push the buttons twice, and than atv is only reacting sometimes.
    Any ideas?
    BR
    Frank

    Same problem here. First, I thought it was the Apple remote's battery. I replaced that and the problem persisted. I then used my digital video camera to verify that the remote was actually transmitting infrared, it was. In frustration, I tapped the buttons rapidly while pointing at the Apple TV. The Apple TV responded. The next button press it failed to respond. I tapped rapidly again and it finally responded. After many many rapid presses, while pointing directly at the Apple TV, it finally began responding to all presses. Once I'd regained control (I thought) I unpaired and re-paired the remote. Everything continued to work. At that time I also saw that I could "learn" another remote. So, I set up my Samsung TV remote. Sweet. Until the Apple TV went into screensaver mode again and I had to go through the same rapid button press sequence... with either the Apple remote or my learned Samsung remote. Conclusion, since the Apple TV will become fully responsive after the rapid button press sequence, it is certainly a software related problem.

  • Email counter and connection not working correctly after updates

    How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
    Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine.  Does anyone have a fix for this?

    I did find the problem with the counter.  It had to do with my Gmail account not my other email account.  I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though.  I have made sure that the passwords is correct that is entered.

  • IPad 3 not working correctly after update

    Updated my ipad3 to ios 6 this weekend. Experiencing several issues with the screen freezing in Settings, Reminders & Calendar.
    Tried to restart, backup and restore with iTunes, but no changes. The Calendar and Reminders are still not working.
    A few notes:
    Not able to access the "Mail, Contacts, Calendars" in "Settings". Does not go to the screen. Freezes the "Settings" screen. Forced quit the Settings app.
    Not able to make changes in the "iCloud" in Settings. The circle spins endlessly with no results.
    Calendar is blank (only showing a blank opened book).
    Reminders is blank.
    I use iCloud to sync my calendars between a laptop, ipod touch, desktop, and ipad.
    Any ideas on how to resolve this issue?

    Updated my ipad3 to ios 6 this weekend. Experiencing several issues with the screen freezing in Settings, Reminders & Calendar.
    Tried to restart, backup and restore with iTunes, but no changes. The Calendar and Reminders are still not working.
    A few notes:
    Not able to access the "Mail, Contacts, Calendars" in "Settings". Does not go to the screen. Freezes the "Settings" screen. Forced quit the Settings app.
    Not able to make changes in the "iCloud" in Settings. The circle spins endlessly with no results.
    Calendar is blank (only showing a blank opened book).
    Reminders is blank.
    I use iCloud to sync my calendars between a laptop, ipod touch, desktop, and ipad.
    Any ideas on how to resolve this issue?

  • My wacom tablet does not work correctly after updating to mavericks.

    My wacom doesn't work.

    Jason, how did you switch back? My tablet does not work either. All I can do for the moment is work on my laptop which has the old system.
    Thanks,
    Teresa
    I was almost certain that the new osx would be trouble as was Lion and after that Mountail Lion. So, instead of my usual hard drive clone, which I make with superduper, I made a second one just to be certain. After 10 minutes of Mavericks, I am happy back to snow leopard.
    I really think that it is the most developed, glitch free operating system. If it wasn't for all these money thirsty companies stopping the support of the previous op. systems perhaps we could stop at Snow leopard. What more to ask. Even aesthetically osx 10.9 is much worse that snow leopard.
    Anyway, long answer. sorry. It is a good habit to clone your HD once in a while.
    p.s. my only reason for wanting to upgrade is because Lightroom stopped support but I am still doing my work with the previous versions. I guess people will allways think that if they have the newest, biggest, baddest version of a software will make them better in what they do..or in who they are, really.

  • Itunes store not working properly after update 10.7

    I just did the latest itunes update to 10.7 and initially itunes store seemed fine, I was browsing films and was able to view a trailer, but the screen changed and there were suddenly no images of fims or ability to view trailers and nothing happens when I click 'rent film'. I restarted both itunes and computer but it's still the same. The main itunes store screen is completely blank now, if I scoll right to the bottom I can click on 'films' then screen is black apart from right hand menu. And still not functioning. Would really welcome some help please! Thanks.

    Hi justineflow, is your problem similar to this - https://discussions.apple.com/thread/4318276?tstart=0
    It seems maybe iTunes is being updated or there is an issue with 10.7 for some people not using Lion or Mountain Lion..? Wondered if it was a Snow Leopard thing but you're using 10.3.9 so that's not the issue. Wondering if it's just a UK thing...

  • Synaptics Touchpad doesn't work correctly after update

    I have a Lenovo T61 with 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 11:40:49 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz GenuineIntel GNU/Linux.
    xf86-input-synaptics is installed, version 1.4.0-1
    Since an update, I get the following error when running startx:
    Query no synaptics: 6003C8
    Touchpad unable to query/initialize Synaptics Hardware
    PreInit returned NULL for "Touchpad"
    That is a part of /var/log/Xorg.0.log. The module "synaptics" is loaded two times...
    X.Org X Server 1.9.4.901 (1.9.5 RC 1)
    Release Date: 2011-03-04
    [ 19041.695] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 25 16:17:46 2011
    [ 19041.716] (==) Using config file: "/etc/X11/xorg.conf"
    [ 19041.736] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19041.757] (==) ServerLayout "Xorg Configured"
    [ 19041.757] (**) |-->Screen "Screen0" (0)
    [ 19041.757] (**) | |-->Monitor "Monitor0"
    [ 19041.757] (**) | |-->Device "Card0"
    [ 19041.757] (**) |-->Input Device "Keyboard0"
    [ 19041.757] (**) |-->Input Device "USB Mouse"
    [ 19041.757] (**) |-->Input Device "Touchpad"
    [ 19041.757] (**) Option "DontZap" "False"
    [ 19041.757] (**) Option "AllowMouseOpenFail" "true"
    [ 19041.757] (**) Option "AutoAddDevices" "False"
    [ 19041.757] (**) Option "AutoEnableDevices" "False"
    [ 19041.757] (**) Not automatically adding devices
    [ 19041.757] (**) Not automatically enabling devices
    [ 19041.758] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 19041.758] (II) Loader magic: 0x81f3280
    [ 19041.758] (II) Module ABI versions:
    [ 19041.758] X.Org ANSI C Emulation: 0.4
    [ 19041.758] X.Org Video Driver: 8.0
    [ 19041.758] X.Org XInput driver : 11.0
    [ 19041.758] X.Org Server Extension : 4.0
    [ 19041.759] (--) PCI:*(0:1:0:0) 10de:0429:17aa:20d8 rev 161, Mem @ 0xd6000000/16777216, 0xe0000000/268435456, 0xd4000000/33554432, I/O @ 0x00002000/128
    [ 19041.759] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 19041.759] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "record" will be loaded by default.
    [ 19041.759] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
    [ 19041.759] (II) "dri2" will be loaded by default.
    [ 19041.759] (II) LoadModule: "ddc"
    [ 19041.759] (II) Module "ddc" already built-in
    [ 19041.759] (II) LoadModule: "dbe"
    [ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 19041.759] (II) Module dbe: vendor="X.Org Foundation"
    [ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.759] Module class: X.Org Server Extension
    [ 19041.759] ABI class: X.Org Server Extension, version 4.0
    [ 19041.759] (II) Loading extension DOUBLE-BUFFER
    [ 19041.759] (II) LoadModule: "dri"
    [ 19041.759] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 19041.759] (II) Module dri: vendor="X.Org Foundation"
    [ 19041.759] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.759] ABI class: X.Org Server Extension, version 4.0
    [ 19041.759] (II) Loading extension XFree86-DRI
    [ 19041.759] (II) LoadModule: "extmod"
    [ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 19041.760] (II) Module extmod: vendor="X.Org Foundation"
    [ 19041.760] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.760] Module class: X.Org Server Extension
    [ 19041.760] ABI class: X.Org Server Extension, version 4.0
    [ 19041.760] (II) Loading extension MIT-SCREEN-SAVER
    [ 19041.760] (II) Loading extension XFree86-VidModeExtension
    [ 19041.760] (II) Loading extension XFree86-DGA
    [ 19041.760] (II) Loading extension DPMS
    [ 19041.760] (II) Loading extension XVideo
    [ 19041.760] (II) Loading extension XVideo-MotionCompensation
    [ 19041.760] (II) Loading extension X-Resource
    [ 19041.760] (II) LoadModule: "glx"
    [ 19041.760] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 19041.782] (II) Module glx: vendor="NVIDIA Corporation"
    [ 19041.782] compiled for 4.0.2, module version = 1.0.0
    [ 19041.782] Module class: X.Org Server Extension
    [ 19041.782] (II) NVIDIA GLX Module 260.19.44 Sun Feb 27 21:47:21 PST 2011
    [ 19041.782] (II) Loading extension GLX
    [ 19041.782] (II) LoadModule: "synaptics"
    [ 19041.782] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 19041.782] (II) Module synaptics: vendor="X.Org Foundation"
    [ 19041.782] compiled for 1.9.4, module version = 1.4.0
    [ 19041.782] Module class: X.Org XInput Driver
    [ 19041.782] ABI class: X.Org XInput driver, version 11.0
    [ 19041.782] (II) LoadModule: "record"
    [ 19041.782] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 19041.783] (II) Module record: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4.901, module version = 1.13.0
    [ 19041.783] Module class: X.Org Server Extension
    [ 19041.783] ABI class: X.Org Server Extension, version 4.0
    [ 19041.783] (II) Loading extension RECORD
    [ 19041.783] (II) LoadModule: "dri2"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 19041.783] (II) Module dri2: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4.901, module version = 1.2.0
    [ 19041.783] ABI class: X.Org Server Extension, version 4.0
    [ 19041.783] (II) Loading extension DRI2
    [ 19041.783] (II) LoadModule: "nvidia"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 19041.783] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 19041.783] compiled for 4.0.2, module version = 1.0.0
    [ 19041.783] Module class: X.Org Video Driver
    [ 19041.783] (II) LoadModule: "kbd"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 19041.783] (II) Module kbd: vendor="X.Org Foundation"
    [ 19041.783] compiled for 1.9.4, module version = 1.6.0
    [ 19041.783] Module class: X.Org XInput Driver
    [ 19041.783] ABI class: X.Org XInput driver, version 11.0
    [ 19041.783] (II) LoadModule: "mouse"
    [ 19041.783] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 19041.784] (II) Module mouse: vendor="X.Org Foundation"
    [ 19041.784] compiled for 1.9.4, module version = 1.7.0
    [ 19041.784] Module class: X.Org XInput Driver
    [ 19041.784] ABI class: X.Org XInput driver, version 11.0
    [ 19041.784] (II) LoadModule: "synaptics"
    [ 19041.784] (II) Reloading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 19041.784] (II) NVIDIA dlloader X Driver 260.19.44 Sun Feb 27 21:31:52 PST 2011
    [ 19041.784] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 19041.784] (--) using VT number 7
    [ 19041.891] (II) Loading sub module "fb"
    [ 19041.891] (II) LoadModule: "fb"
    [ 19041.891] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 19041.891] (II) Module fb: vendor="X.Org Foundation"
    [ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 19041.891] (II) Loading sub module "wfb"
    [ 19041.891] (II) LoadModule: "wfb"
    [ 19041.891] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 19041.891] (II) Module wfb: vendor="X.Org Foundation"
    [ 19041.891] compiled for 1.9.4.901, module version = 1.0.0
    [ 19041.891] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 19041.891] (II) Loading sub module "ramdac"
    [ 19041.891] (II) LoadModule: "ramdac"
    [ 19041.891] (II) Module "ramdac" already built-in
    [ 19048.959] (**) Option "CoreKeyboard"
    [ 19048.959] (**) Keyboard0: always reports core events
    [ 19048.959] (**) Option "Protocol" "standard"
    [ 19048.959] (**) Option "XkbRules" "xorg"
    [ 19048.959] (**) Option "XkbModel" "pc105"
    [ 19048.959] (**) Option "XkbLayout" "de"
    [ 19048.959] (WW) Option "XkbVariant" requires an string value
    [ 19048.959] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
    [ 19048.983] (WW) USB Mouse: No Device specified, looking for one...
    [ 19049.058] (II) USB Mouse: Setting Device option to "/dev/input/mice"
    [ 19049.058] (--) USB Mouse: Device: "/dev/input/mice"
    [ 19049.058] (==) USB Mouse: Protocol: "Auto"
    [ 19049.058] (**) Option "SendCoreEvents" "true"
    [ 19049.058] (**) Option "CorePointer"
    [ 19049.058] (**) USB Mouse: always reports core events
    [ 19049.058] (**) Option "Device" "/dev/input/mice"
    [ 19049.191] (**) Option "Buttons" "5"
    [ 19049.191] (==) USB Mouse: Emulate3Buttons, Emulate3Timeout: 50
    [ 19049.191] (**) Option "ZAxisMapping" "4 5"
    [ 19049.191] (**) USB Mouse: ZAxisMapping: buttons 4 and 5
    [ 19049.191] (**) USB Mouse: Buttons: 9
    [ 19049.191] (II) XINPUT: Adding extended input device "USB Mouse" (type: MOUSE)
    [ 19049.191] (**) USB Mouse: (accel) keeping acceleration scheme 1
    [ 19049.191] (**) USB Mouse: (accel) acceleration profile 0
    [ 19049.191] (**) USB Mouse: (accel) acceleration factor: 2.000
    [ 19049.191] (**) USB Mouse: (accel) acceleration threshold: 4
    [ 19049.218] (II) USB Mouse: Setting mouse protocol to "ExplorerPS/2"
    [ 19049.510] (II) USB Mouse: ps2EnableDataReporting: succeeded
    [ 19049.510] (**) Option "Device" "/dev/input/mouse0"
    [ 19049.521] (--) Touchpad: invalid x-axis range. defaulting to 1615 - 5685
    [ 19049.521] (--) Touchpad: invalid y-axis range. defaulting to 1729 - 4171
    [ 19049.521] (--) Touchpad: invalid pressure range. defaulting to 0 - 256
    [ 19049.521] (--) Touchpad: invalid finger width range. defaulting to 0 - 16
    [ 19049.521] (**) Option "SHMConfig" "on"
    [ 19049.521] (**) Option "LeftEdge" "1300"
    [ 19049.521] (**) Option "RightEdge" "5900"
    [ 19049.521] (**) Option "TopEdge" "1100"
    [ 19049.521] (**) Option "BottomEdge" "5200"
    [ 19049.521] (**) Option "FingerLow" "25"
    [ 19049.521] (**) Option "FingerHigh" "30"
    [ 19049.521] (**) Option "MaxTapTime" "180"
    [ 19049.521] (**) Option "MaxTapMove" "220"
    [ 19049.521] (**) Option "VertScrollDelta" "100"
    [ 19049.521] (**) Option "VertTwoFingerScroll" "on"
    [ 19049.521] (**) Option "MinSpeed" "0.06"
    [ 19049.521] (**) Option "MaxSpeed" "0.6"
    [ 19049.521] (**) Option "AccelFactor" "0.0040"
    [ 19049.541] (EE) Query no Synaptics: 6003C8
    [ 19049.541] (--) Touchpad: no supported touchpad found
    [ 19049.542] (EE) Touchpad Unable to query/initialize Synaptics hardware.
    [ 19049.558] (EE) PreInit returned NULL for "Touchpad"
    Running synclient returns the following:
    Couldn't find synaptics properties. No synaptics driver loaded?
    Running syndaemon returns the following:
    Unable to find a synaptics device.
    The Touchpad is still working, but changing options in the xorg.conf or the 10-synaptics.conf doesn't have any effect anymore. For example, I can not enable VertTwoFingerScroll, what was no problem before the error occured.
    The section for the touchpad in /proc/bus/input/devices is the following:
    I: Bus=0011 Vendor=0002 Product=0007 Version=81b1
    N: Name="SynPS/2 Synaptics TouchPad"
    P: Phys=isa0060/serio1/input0
    S: Sysfs=/devices/platform/i8042/serio1/input/input5
    U: Uniq=
    H: Handlers=mouse0 event5
    B: EV=b
    B: KEY=6420 0 30000 0 0 0 0 0 0 0 0
    B: ABS=11000003
    I tried the following:
    Removing the 10-synaptics.conf and commenting out the touchpad-section in the  10-evdev.conf
    Adding the line MatchDevicePath "/dev/input/event*" to the 10-synaptics.conf
    Thanks for help

    I commented the whole
    #Section "InputDevice"
    #       Identifier  "Synaptics Touchpad"
    #EndSection
    part
    and the appropiate line
            #InputDevice "Synaptics Touchpad" "SendCoreEvents"
    on Sever Layout.
    It stopped the EE error, touchpad works here
    but it's reverted to old "typing=accidentally doing clicks" since it got way too sensitive
    I can't run gsynaptics , synclient or syndaemon to fix it (as I used to)
    since I get
    drini ~ $ synclient
    Couldn't find synaptics properties. No synaptics driver loaded?

  • Iphone 4s and itunes don't work anymore after update iphone

    I updated my iphone and plugged it into my mac to synch with itunes because the symbol of the 'usb and itunes logo' appeared.
    But now itunes doesn't recognize my iphone anymore and says that I first have to recover my iphone.
    But my iphone doesn't respond anymore because it only shows the symbols of usb and itunes.
    What to do?

    read http://support.apple.com/kb/HT1808

  • Bookmarking no longer works correctly after updating to the latest version of Firefox. How can this be fixed?

    In the past, when I tried to bookmark a Web page, I had the option of choosing where I wanted the bookmark stored. If I selected "Choose," I would be presented with a list of all my folders. Not any more! Now, if I select "Choose," I am presented with only three options: "Bookmarks Toolbar," "Bookmarks Menu," and "Unsorted Bookmarks."
    Firefox continues to become increasingly difficult to use, and appears to be less stable. I fell that I am being forced to migrate to Google Chrome. What is going on?
    BTW, Firefox prevented support.mozilla.org from asking me to install software on my computer, so I was not able to automatically add troubleshooting information.
    Richard
    <sub>edit: removed your mail address from public display, since the only thing it will attract are spam bots. you will be notified per mail once somebody replies to the thread. (philipp)</sub>

    No. After I select "Choose" the dialog box expands to provide only three choices. This is a new bug. I have only seen it in the past week or so, but it is maddening. I have observed that, while the Mozilla Foundation focuses on trivialities like which search engine should be the default, the Firefox application becomes buggier and buggier. Most of my family has switched to Chrome, and I will be following shortly. Firefox used to be a great program. Not any more. Getting assistance with a problem has also become very difficult.

  • ITunes / iPhone not working properly after newest update...

    iTunes is not working properly after the newest update...  It dosen't see my iPhone, the program acts very sluggish, and has trouble loading the Store.  Anyone have a solution or an explanation?  I have tried the suggestions found in other threads ie. restart, re-download, charge phone, restart phone and so on. Nothing works.  Everything was working fine until iTunes and the new ios were installed.  After that it all went to crap.  Thanks, Randy...

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1.  Select does not protect unselected areas.  Magic eraser erases unselected ares.

    Ps CC 2014 is not working correctly after mac update to Yosemite 10.10.1.  Select does not protect unselected areas.  Magic eraser erases unselected ares.

    Yes my particular issue is not like yours. However, there have been many other laptop users experiencing similar problem to yours after 3.10 kernel. Mostly it seems to be bumblebee users that experience your problem with the blank screen. We do know that nvidia have yet to make their official drivers work with kernel 3.10 and up. The drivers in the Arch repository have been patched to work with 3.10. From what I have seen, this also only seem to be affecting laptops with newer nvidia gpu's. I fear there is not much to do with this problem until nvidia give official 3.10 kernel support.
    My suggestion would be to stick with 3.9.9 kernel and the drivers that work with it, and don't upgrade those packages until nvidia has addressed these issues. If you have a look at the nvidia forums you will see quite a number of topics mentioning black screen when starting x on 3.10 kernel, and also a thread for the system dying. Reading some of the threads there may help you keep up to date on whether or not the issue seem to be solved.
    https://devtalk.nvidia.com/default/board/98/

  • Wallaby animation isn't working correctly after app update

    Hi DPS fellows,
    This afternoon I've updated my Adobe Content Viewer and all my wallaby animations began to work in a different way.
    It's just fades in instead of doing the animation.
    Most of them are just animated letters for a headline. The animations consist in each letter appear at different time, sometimes coming form right, some form left or from the top of the page, but after the updated, they just appear in a fade in. Before tha worked pretty fine.
    Does anybody here knows how to solve that?
    Thanks a lot.

    Hi!
    I have a German manual with a step by step list. How you can use Path-Objects (Text and Frames) for an Wallaby HTML5 animation. And used in the Adobe DPS Folios.
    If you want to have the manual in German, I can send you this e-mail tomorrow!
    Bye!
    Von: Felipe - dualpixel [email protected]
    Gesendet: Mittwoch, 13. März 2013 22:10
    An: D4c_Rene
    Betreff: Wallaby animation isn't working correctly after app update
    Re: Wallaby animation isn't working correctly after app update
    created by Felipe - dualpixel <http://forums.adobe.com/people/Felipe-dualpixel>  in Digital Publishing Suite - View the full discussion <http://forums.adobe.com/message/5146016#5146016

  • Getting itunes has stopped working message after downloading to Windows 8.1

    Getting ITunes has stopped working message after 10 seconds after downloading to Windows 8.1

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • ITunes has stopped working message after having it open for one minute.

    It's fully updated to iOS 5 and was working fine until now. Running on Windows 7 and worked flawlessly till this point. Any tips? I already uninstalled and reinstalled. Only security software I run is Microdoft Security Essesntials and that has never been an issue. At a loss here.

    iTunes has stopped working message after having it open for one minute.
    I open itunes and a message comes up after a minute "itunes has stopped working". I got the update automatically to my Windows 7 64 bit pc 10.5.0.142.  After reading tons of probelms online about version 10.5
    I have decided to do nothing for now.  Seems people are putting hours into trying to fix it.  I was going to uninstall and reinstall but seems that isn;t working for to many people.
    How do we get some help from apple? 
    Anyone have any answers???  APPLE HELP please!!!!!!!!!!!!!!!

Maybe you are looking for