ITunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer, what do i do?

iTunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer, what do i do?

Under the Apple menu choose "Software Update".

Similar Messages

  • I increased my hard drive RAM, I tried to open Itunes and it gives me the following message: iTunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer.  Updated everything, still not working. What should I do ?

    I have updated all my software, my ITunes content is available in my music and video files, but I click on ITunes and it doesn't open, it continues to give me the message that I ned to update quicktime, quicktimes has been updated, and even Quicktimes Pro has been purchased and installed. What can I do?

    You stated; "I increased my hard drive RAM"
    I don't understand how you can do that. Please explain.
    Allan

  • ITunes requires QuickTime 7.5.5 or later...

    I just udated a 10.4.11 install to 10.5.8
    now when I attempt to open iTunes 10.6.1, I get this error: "itunes iTunes requires QuickTime 7.5.5 or later"
    Software update says everything is up to date
    I ran Cocktail, Repair Permissions, Repair Disk, rebooted (nothing unusual going on)
    I go to http://www.apple.com/quicktime/ and -- NEVERMIND -- I just found the solution here:
    http://support.apple.com/downloads/#quicktime
    QuickTime 7.6.4 for Leopard
    QuickTime 7.6.4 includes changes that increase reliability, improve compatibility and enhance security. This release is recommended for all QuickTime 7 users.
    September 09, 2009 - 56.54MB Leopard
    These are manual downloads...

    iTunes requires QuickTime 7.5.5 or later. For more information on upgrading your computer, visit http://www.apple.com/quicktime i have also this kind of problem and i already did  go to what you've said but still looking for the quicktime 7.5.5 or later for my itunes and i can't open in  please help me sir/mam

  • Hi my mac saying itunes requires quicktime 7.5.5 or later how do i upgrade?

    I am using mac osx software. but it kept showing itunes requires quicktime 7.5.5 or later. How can i upgrade the mac?

    Click here or run the Software Update pane of System Preferences.
    (120533)

  • All of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

    all of sudden, I can't launch iTunes as I get a popup saying "iTunes requires Quicktime 7.5.5 or later". I only have 7.4 currently and the apple site doesn't show anywhere to download Quicktime upgrade. Software Update detects no reqd updates. Help pls??

    Here's a link to the QuickTime for Leopard 7.7 installer:
    http://support.apple.com/kb/DL761

  • Why whenever i try to open my itunes, it says " itunes requires quicktime 7.5.5. or later?

    Why is it that whenever i try to open my itunes, it says " itunes requires quicktime 7.5.5. or later???

    QuickTime 7.5.5 for Leopard - http://support.apple.com/kb/DL27
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    =New version of Quicktime installed but application reports it needs to have that version installed=
    Open Application > Utilities > System Profiler and check the Quicktime version in Frameworks vs. the version in Applications.  I recently helped where the person had re-installed their operating system.  It had kept the newer Player application but had reverted to an earlier version of the underlying support framework that works with many applications.  Re-installing Quicktime 7.7 took care of the problem.
    Installation get stuck at "configuring installation" - https://discussions.apple.com/thread/2592979?threadID=2592979  - uninstall Quicktime before installing.

  • One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

    One or more required office component failed to complete successfully for more information, consult the setup log file. while uninstallation of sharepoint 2013

    go to start > run > type %temp% > here check for latest file and provide us details in that log file
    If this helped you resolve your issue, please mark it Answered

  • Reversi Sample - "The project requires user input. Reload the project for more information."

    A week ago, I downloaded the sample code examples.  Then I extracted the reverse sample code, loaded it and ran it.  All was well.
    I was just using it as a resource for example code, so no code changes.  Now, when I open the project, I get nothing loaded.
    Solution explorer displays       Solution 'Reversi' (0 Projects).    Below that
    "The project requires user input.  Reload the project for more information."
    This message shows for all three sections  Reversi, ReversiGameComponet, and ReversiComponentTests.
    Ok, so I figure I must have accidently changed something.  So, I re-extract.  Same message. 
    The only thing I can think of is that in the options, I changed the startup location for my projects.  I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8.  I've always done this so that when I create a new project,
    it does it in my project directory by default.  Didn't change anything else such as the templates dir.
    I did set this back to the c:....projects, as where templates are, but that didn't help.  So, I reset to my projects directory.
    My project that I created loads ok.
    Suggestions?

    A week ago, I downloaded the sample code examples.  Then I extracted the reverse sample code, loaded it and ran it.  All was well.
    I was just using it as a resource for example code, so no code changes.  Now, when I open the project, I get nothing loaded.
    Solution explorer displays       Solution 'Reversi' (0 Projects).    Below that
    "The project requires user input.  Reload the project for more information."
    This message shows for all three sections  Reversi, ReversiGameComponet, and ReversiComponentTests.
    Ok, so I figure I must have accidently changed something.  So, I re-extract.  Same message. 
    The only thing I can think of is that in the options, I changed the startup location for my projects.  I like to keep my code projects on the d: drive, so I changed that to D:\!!!W8.  I've always done this so that when I create a new project,
    it does it in my project directory by default.  Didn't change anything else such as the templates dir.
    I did set this back to the c:....projects, as where templates are, but that didn't help.  So, I reset to my projects directory.
    My project that I created loads ok.
    Suggestions?
    Hi there,
    Can you provide the link for the sample code example so I can download and try on my machine?
    Regards,

  • My itunes will not open cause it says itunes requires quicktime 7.5.5 or later but i have quicktime 7.2

    My itunes will not open cause it says itunes requires quicktume 7.5.5 or later but i have quicktime 7.2 installed already on my mac

    Hi, try this...
    http://www.apple.com/itunes/download/

  • When i sync my ipad to itunes I get a message on the screen 12 songs did not sync to ipad see itunes for more information. how do I determine what songs did not sync where in itunes is this information stored

    the old version of itunes had a drop down box listing songs that did not sync newer version does not how can i see what songs did not sync,  The box message on the screen says 19 items did not sync to your ipad, see itunes for more information.  Where do I look??

    Hello Tonchee
    If you are seeing an Apple ID that is not yours, then you have purchased content on your iPad that is tied to that Apple ID. You would need to know that password or remove the content that is associated with that Apple ID.
    Using your Apple ID for Apple services
    http://support.apple.com/kb/ht4895
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • TS1717 When I try to launch iTunes, I get this message "iTunes requires QuickTime 7.5.5 or later" What can I do? Nothing shows up when I run a software update. Help?

    Up top.
    Thanks,
    Jeremy

    Here's a link to the QuickTime for Leopard 7.7 installer:
    http://support.apple.com/kb/DL761

  • ITunes will not open, requires Quicktime 7.5.5 or later.

    I've just reset my iMac and reinstalled Leopard but when I try to open iTunes I get this error message; iTunes requires Quicktime 7.5.5 or later. I've downloaded version 7.7 but still get the same message. I've read on here to download an earlier version of iTunes and then to update that but I can't find an earlier version from anywhere.
    Any help would be very much appreciated..

    Hi Dave. Many thanks for your response. I uninstalled iTunes and Quicktime and then reinstalled them and now I can open iTunes. I now have another problem. The music that is on my iPhone that was imported from my iTunes prior to resetting my Mac seems to be unavailable for me to play. It doesn't show up on my iPhone when it's not connected. But when I connect it to my Mac all the songs show up under the music tab of my iPhone but they are all light grey and when I click one an exclamation mark appears next to it. I've tried authorizing my account but that doesn't do anything.
    If you have any idea what the problem could be I would really gratefull.

  • Itunes will not open on macbook.  says requires quicktime 7.5.5 or later.

    Have a macbook and when I try to open itunes it says that itunes requires quicktime 7.5.5 or later.  I try to download quicktime as i have 7.5 and it tells me to manage software through the software update function.  The software update function will not find an update for quicktime.  Help!  Not sure how to get itunes set up

    Hi there,
    I have also just updated my computer via the system updates. I am running OS Snow Leopard 10.5.8, and my iTunes won't open and then prompts me for a Quicktime update 7.5.5.
    Now, I have gone through the Apple support and downloaded the Quicktime update 7.5.5 for OS 10.5 or later (or whatever it was - the second from the top?). Anyways, it says it installed properly and that I need to restart my laptop. Once I have restarted, iTunes still will not open and it still says I need to update Quicktime.
    I have tried a few other solutions and nothing seems to work. Do you have any further suggestions on what I have to do to make this work? I'd really not like to have to use another media player to play music. And I don't really want to have to go out and buy a new laptop.. Although I'm starting to get really frustrated with the apparent lack of support for older versions.
    Any thing you can suggest will be greatly appreciated.
    Thanks!

  • I have a laptop using OSX 10.5.8, iTunes v. 10.6.3 and Quicktime 7.7.  iTunes will not open.  It says it requires QuickTime 7.5.5 or later.  I've tried reinstalling each of them.  No success.  Don't know what to try next.

    I have a laptop using OSX 10.5.8, iTunes v. 10.6.3 and Quicktime 7.7.  iTunes will not open.  It says it requires QuickTime 7.5.5 or later.  I've tried reinstalling each of them.  No success.  Don't know what to try next.

    QuickTime 7.5.5 for Leopard - http://support.apple.com/kb/DL27
    QuickTime 7.7 for Leopard - http://support.apple.com/kb/dl761
    = New version of Quicktime installed but application reports it needs to have that version installed =
    Open Application > Utilities > System Profiler and check the Quicktime version in Frameworks vs. the version in Applications.  One person had re-installed their operating system.  It had kept the newer Player application but had reverted to an earlier version of the underlying support framework files which many applications utilize.  Re-installing Quicktime 7.7 took care of the problem.  Do this manually, not with Software Update.
    Installation get stuck at "configuring installation" - https://discussions.apple.com/thread/2592979?threadID=2592979  - uninstall Quicktime before installing.

  • QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3

    QuickTime version 7.1 is installed, iTunes requires QuickTime version 7.1.3 or later. Please reinstall iTunes.
    That's the error message I have gotten for the past 3 days since trying to upgrade itunes. I have the newest quicktime downloaded, have deleted itunes and quicktime and redownloaded it all, and it still won't work. I have NO idea what to do to make this work, but it's driving me crazy. If anyone can help, please give some advice.

    You can try to fully remove both iTunes and Quicktime. Then reinstall the software again. The following link will walk you through the removal of both programs. Make sure you complete Step 16 in the article. Good luck.
    http://docs.info.apple.com/article.html?artnum=93698

Maybe you are looking for

  • How to switch my Itunes library from External Drive to Internal drive

    I recently formated my hard drive and backed up all my tunes to an external drive. When the computer was back and running I imported my tunes from the external drive to my Itunes. However itunes still reads music from the external even though the mus

  • How can open accruals be shown correctly in a rebate report?

    Dear All, I would like to know if someone can help me with the following issue. My customer has an issue with a customer-made report for rebate settlement. When we issue partial settlements at the end of the month, the column with the open accruals i

  • Which is theb best way to read a file of 5-10 mb

    Hi, I need to read a flatfile of 5-10 mb and simultaneously insert into database . Reading through FileInputStream or FileReader? Which is the best approach to do this keeping in considerataion performance and memory management. Please help .Its is a

  • I need a print magnifier app??

    I folks Just got an ipod touch but need some kind of app that will magnify the print on newspaper apps. Any suggestions? Thanks, Pat

  • Update to wp7.8

    Hi! i m trying to update my lumia 610 to wp7.8. When i connected it with Zune, it shows your phone is up to date.... But it has old 7.5...... Plz help meee..... Thanx