Itunes restarted after computer update and lost every thing

Hello,
I recently updated my computer ( macbook with a mac os x 10.5.8 ) . one of the updates was for the itunes.
after i restarted every thing somthing went wrong with my itunes and now it looks like i have itunes 8 .
all my playlists are gone and all my iphone data is gone as well. i can not conect my iphone to itunes ( it doesnt recognize it at all ) and i can't conect itunes to the internet for some reson.
please help !
Dan

You should be able to:
Backup the device
Transfer any purchases from the device that were not already downloaded into your new library
Recover any other media using third party tools as suggested in this post from forum regular Zevoneer
Restore the device from the backup
This process should switch the association of the device to the new library, preserving the data and settings in your apps.
May also be prudent to attempt a backup to iCloud directly from the device before you start... Settings > iCloud > Storage & Backup > iCloud Backup > On. It won't save any media but it would preserve the general account settings and documents in case anything goes wrong while you are trying to extract your other data.
When you get it all fixed, make a backup!
tt2

Similar Messages

HT1766 How do I get my music from my iphone to itunes after computer crash and lost previous itunes library?

My computer crashed and I lost iTunes library and all playlists from computer. Now I have a lot of music that I want to save to iTunes and cannot. Additionally, I cannot add new songs without erasing the entire library from my phone. HELP!!!

Restore the iTunes library from the backups you were keeping regularly of your computer.

HT1349 hey i got a macbook that went to restart after an update and a blank screen with a file with a ? any ideas

i have a macbook that wont restart it has a white pg with a folder with a ? mark on it !!
serial # W8******YA2
<Edited By Host>

Question (?) Mark, Blinking Folder, or Gray Screen at Startup
These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
A flashing question mark appears when you start your Mac
Mac OS X- Gray screen appears during startup
In most cases the problems may be caused by:
Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
Boot drive's directory has been corrupted - Repair with Disk Utility.
Critical system files are damaged or deleted - Reinstall OS X.
The disk drive is physically non-functional - Replace the hard drive.
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD:
Boot From The Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstall Snow Leopard Without Erasing The drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing The Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

I updated to 7.1.1 and lost every thing.

I updated my phone to the latest software and when I went to check if it had finished updating it asked me to connect to iTunes. I updated iTunes to the newest software too and then connected my phone. My phone stayed on the connect to iTunes screen and then it said I had to restore my iPhone because it was in recovery mode and I can't use my phone at all and I don't really want to restore my phone as I will lose everything as I haven't synced my iPhone for a while so I wont be able to get all data back.

ershad459 wrote:
why this happend?
Hard to say, but things happen to electronics.
ershad459 wrote:
my iphone is not jailbreak.
Has nothing to do with it.
ershad459 wrote:
my information is so important.
As my information is important to me as well.
ershad459 wrote:
are you sure there is no way to get out?
Yes

Windows 7 tells me that my windows is not genuine and the problem is Firefox. I did a total install and lost every thing and it worked fine for a month and it did it again.

At windows start up it tells me that this copy of window is not genuine and as get into window a message pops up telling that fine the solution qlick here and this tells me is firefox and the steps I need to take. But nothing works even taking the cumputer to an earlier date through system recovery.

You need to have the original serial number from the first time. If you purchased it thru a school program/discount then you should check with the school to see if they still have some way of assisting you.

Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I wen

Before I updated my iPod I had all of the songs to an album that I bought on iTunes. After I updated my iPod I only have 5 of those songs from the album. I would like to know how I can get the rest of the songs cause I already paid for the album and I went on my computer and it said that I have to pay for them even though I already paid for the whole album. So what do I do?

Sync with the same computer iTunes that you normally sync with.

I've downloaded itunes 12.0.1.26 3 times after the update and it still doesnt work! Everytime i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use itunes!!!!!!

I've downloaded iTunes 12.0.1.26 3 times after the update and it still doesn't work! Every time i start it up it comes up not responding, why is this happening? how can it be fixed? I currently cannot use iTunes!!!!!!

Hey High Socks,
Thanks for the question. If I understand correctly, iTunes isn't working when you try to launch it. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

I was updating my ipod touch to iso 6.1 ans when it restarted after the update it froze and i held the lock button and home button down to restart it and it goes to random colour screens

I was updating my ipod touch to iso 6.1 (i think) and when my ipod restarted after the update it froze on the loading bar so i held the lock and home buttons down to restart my ipod it showed the apple logo for a few seconds then the screen went random colours. I tried to let the battery drain then plug it into the computer but it doesen't recognize it when i connect it.
Please help!!!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I synced my iphone 5 with my computer and save all the photos to my phone through itunes. i restored my mac and lost all my photos on the mac but i still have them on my phone. how do i get them on my new mac now?

i synced my iphone 5 with my computer and save all the photos to my phone through itunes. i restored my mac and lost all my photos on the mac but i still have them on my phone. how do i get them on my new mac now?

how do i get them on my new mac now?
Be careful, when you connect the iPhone to your mac, unless you have saved the photos. Synced photos may easily be accidentally deleted by syncing again. And do not enable iCloud Photo Library (Beta), that will erase synced photos as well. Synced Photos are not included in the device backups.
Set your iTunes Preferences to "Devices > Prevent iPos, iPhones, iPads from syncing automatically". Otherwise iTunes may launch and sync your iPhone with an empty iPhoto library the moment you connect it.
Unfortunately, it is not possible to sync the synced photos back. Apple recommends to mail them back, but that would be a lot of clicking (iTunes: Syncing photos - Apple Support). You could also share them to a Shared Album, but a third party app like TD recommended, will be better.

HT203167 my computer crashed and lost my itunes, now i have a new computer...is there any way to get my music back from my account

my computer crashed and lost my itunes, now i have a new computer...is there any way to get my music back from my account

It has always been very basic to always maintain a backup copy of your computer for just such an occasion.
Use your backup copy to put everything back.
If for some reason you have failed to backup, not good, then you can redownload some purchases in some countries.
Downloading past purchases from the App Store, iBookstore, and iTunes Store

So i have some open work from the night before on my computer and left it on, closed the top, the computer restarted it's self and lost all the work to what was added.....where can i find it....was it auto saved?

so i have some open work from the night before on my computer and left it on, closed the top, the computer restarted it's self and lost all the work to what was added.....where can i find it....was it auto saved?

If the application supported auto-save, yes, if not, then no.
If you were creating a mail message, it might be in the drafts folder of the e-mail program.
What evidence do you have the computer restarted itself? Did the Apple logo come up?

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

I tried downloading iTunes to my computer. It gives me an error where it says can not find iTunes Helper. I uninstalled all iTunes, restarted my computer, and then tried again. I keep getting the same error everyime. What can I do?

Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2).
Many thanks. That issue will be causing the iTuneshelper error message too.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version). If the following link takes you to the WinRAR home page rather than the WinRAR downloads page, click the Downloads header in the box at the left of the WinRAR home page to see the trial version downloads:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I cannot install an update on Photoshop 11 because it says I have programs running that must be closed. I have no programsa of any kind running and I have shut down and restarted my computer twice and I still can't install the update. Also, the tutorial

I cannot install an update on Photoshop 11 because it says I have programs running that must be closed. I have no programs running and I have restarted my computer twice and am unable to install this update. Also, I need the update because the tutorial for 11 shows a completely different screen than I have on my version of 11. Please advise.

Garbage which operating system are you using? Have you tried using the Task Manager/Activity Monitor to close the offending application/process?

There was add one and i lost it after the update and i don't remember it's name

there was add one and i lost it after the update and i don't remember it's name
it was add-on to show me the source of any click able content
like pics on twitter or Facebook
also the videos on youtube
and it showed a little icons with small pic shape on it with different colors
and also sometimes with a small lock shape on it
now i need to know what this add -on name or how to get it back

Add-ons are not auto-deleted as far as I know...
It's possible that the extension or userscript simply doesn't work correctly in Firefox 22 due to a change in Firefox. If you look at the add-on pages, often the reviews will mention whether the add-on is broken in a new release.

I have to restart my computer at least once every day in order to get my podcast to update? I thought the new version would fix this but it's just getting worse. Please help.

I have to restart my computer at least once every day in order to get my podcast to update? I thought the new version would fix this but it's just getting worse. Please help

Did you check the Processes tab in the Task Manager?
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* [[Firefox hangs]]

Itunes restarted after computer update and lost every thing

Similar Messages

Maybe you are looking for