Itunes says i dont have the required software for my ipad 2 even though i do! i have uninstalled and re installed it many times.
Itunes keeps saying my ipad 2 cannot be used because the required software is not installed. It IS. I have unistalled and reinstalled many times. It worked before but now all of a sudden it doesnt.
this is seriously frustrating!!!
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)
Similar Messages
-
I cannot open any tabs on Firefox. It opens to my homepage, but there is no line for a URL address. Therefore, there is no way to type in a new URL address. I have uninstalled and reinstalled Firefox twice and it has not helped. I am a former PC user and just switched to Mac.
Try restore as new using computer iTunes.
-
HELP ME PLEASE!!!!!
Hi,
You can have monitoring latency and hardware latency and this sounds like hardware latency. What interface do you have and have you done a loopback test?
"Even when I record with the track muted, and I have tried this several times with vocals that are dead on time. When I play it back the track is slow. I know they're recording right, because I can drag the entire track forward a little and get it to sync"
Because you can drag the whole track forward it means that your vocal, despite being in time with itself, is not in sync with the already recorded tracks.
Do a loopback test.
Record a transient sound (hi hat is good) make sure it is dead on the beat, use a midi hi hat and then turn it into audio, Route the recorded audio (hi hat) out of your interfave and then back into your interface to record it on a fresh track. Make sure you don't route them to the main outs to avoid a feedback loop.
Once you have both tracks of hi hat zoom in. The second track will be out with the original and this is the latency of your interface. Zoom right in, you can use the timeline to calculate how many samples it is out. My Motu 828 Mk2 is 58. You then offset this in the Recording Sample offset in your Preferences (not in front of Logic right now so I can't remember the exact term).
Once you have set the offset, do the loopback test again, you can keep all the tracks just make sure you're always using your original, smack on the beat track as your original.
Once the re-recorded matches the original you will have compensated for your interface latency. You do not need to change this if you change sample rate or bit depth. Once you have set it, it stays that way.
Try it and see how you go. If you get stuck there are a few other walk throughs of a loopback test on this very forum.
Hope it helps. -
I can not sync my Iphone 4s with Itunes. I get a "required file can not be found" error. I went the apple stroe yesterday and they said a file may be corrupt. I have uninstalled and re-installed Itunes so it is up to date. ANy thoughts?
Anybody?
-
I cannot access iTunes store from my laptop. I could for years but suddenly - no.
Have removed all recently installed software. Have uninstalled and re-installed both my anti-virus software and iTunes.
Have allowed pop-ups.
Have flushed the DNS. Nothing.
Still can't access the store. Please help!Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I've upgraded to itunes 11.1.4 Now my ipod and my wife's will not connect/ sync. Itunes says it can detect an ipod but it can't be identified correctly. I have uninstalled and re installed ITunes but it still doesn't work
I too am having the same problem. I'm glad to know it's not just me
-
I have updated to Itunes 10.5 on Windows and everytime i start it now, it says "updating Itunes library" and crashes at around 75%. i have uninstalled and re-installed it. No joy! Someone help! Thanks Umar.
Lets see whether this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working? -
I have just updated the i06 software for my iPad and it will not connect to my home wifi network - all my other devices are able to connect to my wifi network.
I have attempted all troubleshooting actions suggested and nothing has worked. I have restored my iPad network and factory settings - Please help - this is frustrating meyou have to set up your router to solve th problem. first find and write down the ipad mac address.
then log on to your router using your laptop or any device that can connect to router at 192.168.0.1 in your web browser. please check out my posting about how to resolve the wifi connection problem.
i think the ios6 update has reset the networking but if you set up the router then you should not have the same problem any more. -
When I connect my iphone and open itunes the iphone icon shows up but when I click it nothing happens and the icon disappears. I have uninstalled and re-installed itunes. Turned my computer off, and turned my iphone off. Restarted everything. Synced my iphone and my itunes and nothing seems to work. Any suggestions? I am using Windows
Stop clicking the eject button.
-
Why ohhhhh why can I NOT get into the store? I have uninstalled and re-installed apps but nothing!! I can bring up my current music but cannot get into the store to purchase more!! Someone please HELP me. I'm soooooo ready to give up!!
Try and "Forget This Network"
Settings>Wi-Fi>tap little arrow on right of network.
http://i1224.photobucket.com/albums/ee374/Diavonex/ea2bf71cacb51e31d8a771a9f29d7 486.jpg -
I can't update the software on my iPad 3 even though I've got enough storage space
I can't update the software on my iPad 3 even though I've got enough storage space, can you help? It is to update to IOS 7.0.4
Storage space on iCloud is not a substitute for storage space on the iPad. You need sufficient storage space on your iPad to accomodate the download. How much Available space do you have? Go to Settings>General>Usage
How much space is used by your Other? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6/7, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
Cheers, Tom -
@Why is it when I go to open a file in Photoshop cc I get a "Could not complete your request because of a program error". I have uninstalled and re-installed software, It works for a short time then I get that error again when i go to open a file. Thank you!
Without proper system information and other details like what files you work with nobody can tell you much. From corrupted prefs to issues with your PS swap file to actual problems with the fiel storage this could be anything.
Mylenium -
iTunes 10.6.0.40 will not open on Windows 7, no error messages come up. Have tried un-installing it and re-installing it many times. Please help.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
Itunes will not open have removed and re-installed still no joy
itunes will not open have removed and re-installed but still no joy
Hello SharlaCerr,
The article linked below provides some helpful troubleshooting steps that can help get iTunes running on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen -
I upgraded my software on my Dell Desktop and now my iPad and iPhone calendars are not syncing with my desktop calendar. I have uninstalled and re-installed my apple software. What am I missing?
I recommend reaching out to Citrix via their support system -
http://www.citrix.com/products/receiver/resources-and-support.html
The receiver app has a specific list of servers it's compatible with, if the server is not on the list the app won't work in OS X.
http://support.citrix.com/servlet/KbServlet/download/28492-102-671726/Receiver%2 0for%20Mac%2011%204%20FAQ%20v1_1235.pdf
Do you know what server you're connecting to?
Maybe you are looking for
-
Page looks horrible in PC browsers
so i'm satisfied with the way this page looks on MACS but PCs is a totally different story. How can I clean this up? http://litigationsupportcareers.com/test/index.html thank you
-
HT4061 my phone is not coming on help!!!!!!!!
my phone is noy coming on HELP!!!!!!!!!!!
-
Defining Switches for HR Adhoc Query
Good Morning, I have the following doubts. I am reading in a documentation the process for Define Switches in Adhoc Query. The definition of switches is located within the same dialog, where Coding has to be stored, that should be executed at Event
-
ITunes account in various countries...
I have an account with a UK credit card, using a the Switzerland iTunes. I am now in USA and have just bought a gift card to "redeem" so I can buy app/music from the States. Everytime I try to "redeem" it asks for my Apple ID: Therefore not letting
-
How to select a movie with the Apple Remote on Mountain Lion?
I asked the Apple store's live chat if on new computers without Front Row and if I get the remote whether I would still be able to select a movie and play it from iTunes with the remote. They said yes. So I pose the question here: How? When I try the