Itunes says I have too restore my Ipod Touch and it's happend 2 in the last 3 days!! whats wrong?
My 2nd generation ipod touch says to connect it to itunes and itunes then says to restore it!! it's really annoying because it's happend 2 in the past 3 days! so it wipes everything off my ipod then I have to put all my stuff back on I even lost apps I paid for
Sounds like it's looping into recovery mode--which may be hardware-related. Download RecBoot and see if you can kick it back out of recovery mode without having to restore.
BTW..The iTunes Store keeps record of your purchases. Just go download the songs you lost. You can get them back without paying for them again.
Basic troubleshooting steps.
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Similar Messages
-
While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I had to change my hard drive, now i'v tried to reinstall itunes it says i have to restore my iopd touch to factory settings and will loose my files. I have a few films on there and they show up on my purchases.If i restore, will i be able to get my films back ? as at the moment my ipod wont work now untill i restore anyway.
Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your device manually before syncing, you can restore from that backup again. A manual backup does not include the sync process.
Here's how to:
Disable autosync in iTunes, connect your ipod to your computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
Transfer your purchases the same way, choosing "transfer purchases" this time.
When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
About backups and what's saved:http://support.apple.com/kb/HT1766
How to back up and restore:http://support.apple.com/kb/HT1414
Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
Saving other data is also described here. How to back up your data and set up as a new device
Message was edited by: Ingo2711 -
I have created another iTunes library (so I have 1 for an ipod touch and a separate 1 for an iPad), but the apps from the iPad appear in both libraries. How can I stop this so the 2 libraries are completely separate? Thanks
You don't need two separate libraries to manage two devices.
I suspect the reason that the apps are appearing in both libraries is that you have enabled automatic downloads in iTunes and automatic syncing of apps so that all your purchases end up in both libraries, defeating your original aim.
Why not use a single library and make playlists for the media content you want on each device? Disable Settings > Store > Automatic Downloads > Apps on each device, then connect each device in turn and turn off Automatically Sync Apps on the Apps page.
You can now manage your devices independently, while only having to manage the content of one iTunes library, instead of two.
tt2 -
my itunes said to update my itunes and ipod touch and when i tried my itunes froze and i had to reset my computer and now my ipod has to restore and when it does it freezes what ddo i do?
This seems to fit yu symptom:
Hang during restore process: Following Troubleshooting security software will frequently resolve this error. This error can be caused by the default packet size being set incorrectly. There may be third-party software installed that modifies the default packet size in Windows by inserting a TcpWindowSize or MaxGlobalTcpWindowSize entry into the Registry. Contact the manufacturer of the software that installed the packet-size modification for assistance in adjusting this TcpWindowSize values. Typically the default packet size is modified by 3G cellular network card software, ISP communication software, or Internet speed download optimization software. There are legitimate reasons to change the TCP/IP packet size and not use the Windows default settings (for example, network traffic optimization, home/broadband optimization, enterprise app optimization such as database apps, Exchange, and more). Deleting the "TcpWindowSize" or "GlobalMaxTcpWindowSize" entries in Windows Registry could affect the system's performance with other apps or on their network connections. Deleting the customized TCP/IP settings may require the reinstallation of any third-party applications that had modified the TCP/IP settings from the Windows default settings.
There are two ways to resolve this:
You can follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) , or follow the steps below to manually find and remove TcpWindowSize and MaxGlobalTcpWindowSize entries from the Registry.
For Windows XP, Windows Vista, Windows 7: Go to the C:\\Windows folder and launch regedit.
Go to Edit > Find.
Search for "TcpWindowSize" entries. There are typically multiple entries of TcpWindowSize/GlobalMaxTcpWindowSize spread throughout the entire Registry. If "TcpWindowSize" exists, one or more third-party applications have changed the user's default Windows settings for TCP/IP.
Go to File and select Export. This step will export a copy of the Registry that can be used as a backup of the original settings.
Delete the "TcpWindowSize" entry.
Search for the next "TcpWindowSize" entry and delete each one until the Registry no longer has any "TcpWindowSize" entries.
Close Regedit, restart the PC, and test.
If you are uncertain as to why these registry entries exist and the PC is a business computer, contact your network administrator and determine what values TCP/IP can be set in their Windows Registry setting so that the PC can update or restore an iOS device rather than deleting the "TcpWindowSize" entry.
If editing the registry does not resolve the issue, restoring on a different computer that did not install the communication software is the step most likely to resolve this issue.
Above from:
http://support.apple.com/kb/TS3694 -
I Have a 2nd gen iPod and it will not sync with the new update of iTunes is there a fix coming for this or not I'd hate to have to buy a new iPod if I don't have to
Have you tried syncing manually using the manual method included in
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
Was the iPod previously synced to another computer/iTunes library?
Next wold be to retore from backup.
iOS: How to back up -
I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.
I do not know wat "reeked to reset" means.
Try the following:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then on your router.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections -
Movie hasnt downloaded for the past 3 days
Hello __sara__13,
From what I can gather from your post, it sounds as though your iTunes content isn't downloading to your comptuer. I have located an article that may help you. It contains some quick troubleshooting steps you can attempt:
iTunes: How to resume interrupted iTunes Store downloads
If your download was interrupted using your Mac or PC
Open iTunes.
Choose Store > Check for Available Downloads.
Type your account name and password if prompted.
If these steps didn't work for you, try the following steps to resolve issue.
Restart your iOS device or computer.
Check for updates for your Mac or PC and install any software updates. Also, update any security software you may have (anti-virus, anti-malware, firewall, and so on).
If using Wi-Fi for Internet access, try using a different Wi-Fi network when downloading. If you are connecting to a home network, try restarting your Wi-Fi router. Also, check for and install any firmware updates for your Wi-Fi router. (Refer to the manufacturer's website for your router to get information on updating its firmware.)
If you are using a Mac or PC, try using an Ethernet cable for wired Internet access instead of using Wi-Fi. If the issue is still unresolved and you're using iTunes for Windows, follow the steps to troubleshoot security software issues.
Thank you for contributing to Apple Support Communities.
Best,
BobbyD -
I have had to restore my Ipod Touch and now I can't connect to anything on it. When it asks for my Apple ID it comes up with an error message and says that it can't connect to the server. I have checked my WiFi connection and its connected.
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
-Griff W. -
Ipod classic has been wiped saying 'no music'etc.
Cannot see it on the 'device list' in my itunes. I have tried restoring to factory settings and reloading...it reloads some of the music, but when I plug the Ipod back in, it wipes it again. Ocassionally Itunes freezes when I plug in the Ipod.Make sure your headphones are plugged in all the way, meaning you cannot see any of the silver still showing from the headphone's plug.
A feature of the Nano is to put it to sleep when the display goes out and it does not detect any headphones.
B-rock -
I have a 3rd gen iPod touch and I downloaded the most recent itunes, ever since I did, only the first song syncs to the ipod. As soon as it gets to the second, it still says its syncing. However, nothing happens. How do I fix this? I have restored and updated the ipod. I have the new iTunes. I have restarted my computer checked the connection and everything.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
my computer will on itunes said that it will not use my new ipod touch because it says that service is not started. I have registered my new ipod touch and am trying to download stuff from my itunelibrary. Ps help!
Try:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
i have a 3rd gen ipod touch and i want to update to 4.3.3 and it says error when done downloading and i have the new itunes?
it says we could not complete your itunes store request an uknown error occurred (-9808)
there was an errorin the itunes store. please try again later. I plug in my ipod to update it and it says that? -
my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766 -
I have Itunes set up to sync with my Ipod touch and Ipad. As of today, iTunes has started searching to sync with an iPhone, which I don't have and pops open with an error message stating it cannot locate the iPhone to sync. I have looked in devices and only the iPad and iPod Touch are listed. Any ideas on how to stop iTunes from searching for any iPhone it is never going to find? It is annoying to have it popping up all the time with the error message. Thanks in advance for any suggestions.
You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer.
Maybe you are looking for
-
ICloud does not work after upgrade to iOS8
I updated my iPad air and my iPhone 5s to iOS8 and since then I cannot access any iCloud service from my iPhone, I cannot even sign out of icloud and I always get the Incorrect password message and a ´There was an error connecting to iCloud.' Error (
-
Scalable service instance deregistered on multi-zone cluster
I have a pair of systems clustered with multiple zones configured on each. The zones are not clustered, however the dataservices are run on the zones in pairs. Some services are failover, some are scalable. The problem arises with the scalable resour
-
Hi All, I find a lot of parameters and windows explorer kind of a stuff in Oracle Internet Directory with respect to MR, database, user authentication and all...Is there any link which provides extensive information about each of those parameters....
-
Remote Registy & Logical Port Exhaustion with multiple JVMs
Hi With reference to below links: http://forums.sun.com/thread.jspa?threadID=5448277&messageID=11042211#11042211 http://forums.sun.com/thread.jspa?threadID=5450445&messageID=11050066#11050066 Will I have a solution with CORBA? (What is the correct Fo
-
How create a button with a certain size??
hi the button I create need to have a image icon, and the size of it should remain the same no matter what happen to the size of the frame or panel. by the way, how do I calculate the size of a image I need to set to a button at run time? thank you.