ITunes says I must use multiple CDs for a 40MB file

The subject says it all. I have a mono audio file that is 43mb. When I try to burn it in iTunes it insists that it needs multiple CDs. This is impossible. A CD can hold 600+MB. I assumed it was a false message, but true to its word it only burned about two-thirds of the file. The playtime is around 3 hours, but that does not matter. Forty-three MB is 43MB. Can anyone tell me how to burn audio files without using rinky-**** software like iTunes? Maybe use Toast? iTunes 7.2, OS 10.3.9
Thanks in advance,
Mguilfoile

Thanks for your help; I'll convert it to an MP3 and I'll be good to go!
I'm curious as to why a 43MB file balloons to what must be 1gig when iTunes saves it? The disk does not know what the data are, it just sees a series of 1s and 0s. An analogy can be made with photography. Certainly only two, 300mb photographs can fit on a CD. It does not matter if they are 5M x 5M or 5cm x 5cm for a print size. All that matters is the digital size. Conversely, you can fit 600 1mb photos on a CD, again, regardless of the print size.
Similarly, the amount of time an audio file will fit on a CD must also be inversely proportional to its digital size. If the audio has a low enough bit rate it three hours should fit easily on a CD. I don't recall what mine was, but 3 hours at 43mb must be a pretty low rate.
Consequently, iTunes must be inflating its files by almost 20 times the file's original size! I find this type of wasteful formating to be incredibly stupid. What is Apple thinking?
Thanks again,
Mguilfoile
G4/500 Mac OS X (10.3.9)

Similar Messages

HT1386 160 gb iPod Classic says it must use iTunes 9 or later. 120 gb iPod Classic (wifes) is on 8.0 and doing fine. If I install iTunes 9, will both iPods be o.k.? Will any music be lost? THANKS

160 gb iPod Classic says it must use iTunes 9 or later. 120 gb iPod Classic (wifes) is on 8.0 and doing fine. If I install iTunes 9, will both iPods be o.k.? Will any music be lost? THANKS

You can either burn it to a CD or DVD from within iTunes, or back up the entire iTunes library as you would any other folder.
(84357)

TS3274 iPad says connect to iTunes, iTunes says I must unlock iPad, cant unlock iPad.

I cannot use my iPad. Whenever i turn it on, the on screne picture has the usb pointing to and iTunes symbol, meaning connect to iTunes. Whenever i connect my iPad to my compture, iTunes says i must unlock my iPad before it can sync. i have a password on my iPad, but cant seen to get to the passcode screne..any help at all? i do not care about anything on the iPad, it can all be erased!

Try this now. Quit iTunes, restart the computer and restart the iPad as well and then try again. If that still doesn't work, you could try using another computer - especially if you don't care about erasing the iPad.
Recovery mode can be finicky, don't give up, keep trying a few more times.

SSP5: Using multiple JVM for load balance performance?

Sun 12 MAY 2002
Apps 11.0.3
SSP5 patchset I
HP UX 11.0
db 8.1.7.2 (64-bit)
Load 60 concurrent sessions, each spawning 2.5 - 3 http connections.
CPU 3:750Mhz
RAM 8G
Is anybody using multiple JVM for load balance?
What is your ratio of JVM to concurrent iP sessions?
Are you running Apache/Jserv on a server with any other applications, or is Apache by itself?
If you are not using JVM, how many httpd processes do you get before Apache implodes? We stopped in the water at 90 httpd processes, but performance degraded starting at 70 sessions.
Thx - Don

Using Web Cache to load balance servlet-based Forms (6i and 9i) is unofficially supported. I say "unofficially" because we have actual customers doing it and getting support, but the 2 development teams (Forms and Web Cache) haven't actually done any integration testing of this sort of configuration yet. For your case, please contact your Support rep and ask what was done to use Web Cache as a load balancer for Forms6i at METRO in Germany. The Forms product managemment team is writing up a white paper to describe how to do it, but until then, you'll need to go through Support. Please contact me if you want more information.

How to use multiple hierarchies for a single char in single query

Hi,
Is there any way that we can use multiple hierarchies for a single char in single query. I tried and it just allows me to select one hierarchy even if I use hierarchy variable.
I have a requirement where user wants to see information related to a cost center with different cost center groups in different hierarchies (every year has different cost center group hierarchies).
Suppose I want to see information related to a cost center from year 2001-2004.in these four year cost center may have been associated to different groups depending upon that year hierarchy. How can I do that?
Thanks
Jona

Nope. Now way to do this.
There is always just one hierarchy assigned to a characteristic. And even if the hierarchy was time dependent, it only reads it for one key date and not according to transaction data.
Regards,
Beat

Itunes says I must update to 11.1, but everytime I try to run it I get an error message saying: "an error occured while running installation" Help?

Itunes says I must update to 11.1, but everytime I try to run it I get an error message saying: "an error occured while running installation" Help?

The full message reads: "Errors occurred during installation before iTunes could be configured. Your system has not been modified. To complete the installation, run the installer again. Click finish to exit the installer."
I have run it again and get the same message. Have rebooted and tried again. Same results.

Hi, my icloud says i have used 2.5GB for email. i want to delete the emails, but they do not show up to delete?

Hi. My icloud storage says I am using 2.5GB for email. I would happily delete all the emails, but very few show up to be deleted. How do I delete all emails on the account (that appear to be hiding in the background somewhere). Thanks

Hi, thank you, but this is where I go to delete all emails (done) but my icloud storage data still claims I am using 2.5GB under the email category. Is there a 'reset' option to clear icloud usage? Thanks

My phone number was added to someone els's iPad and it says they are using my number for iMessage

My phone number was added to someone els's iPad and it says they are using my number for iMessage

Hi Mahmoudmuhmd,
Welcome to the Support Communities!
The telephone number on your Apple ID is tied to iMessages. You may need to change the password for your Apple ID account to prevent others from using it. Here are some articles that will help with this:
Apple ID: Changing your Apple ID password
http://support.apple.com/kb/HT5624?viewlocale=en_US
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796?viewlocale=en_US&locale=en_US
iOS: Using Messages
http://support.apple.com/kb/ht3529
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
Cheers,
- Judy

New Version Of iTunes Wont let me use "multiple speakers" thru airtunes...

The New Version Of iTunes Wont let me use "multiple speakers" thru airtunes with airport express.
I have used airport express to play music while simultaneously playing it thru my computer speakers, but the new version of iTunes wont let me select "Multiple Speakers" from the menu at the bottom of the window

There doesn't seem to be a link to this firmware update, can you repost it? I'm having the same problem.
Thanks
J

Hey! I downloaded a movie from itunes yesterday. I watched the beginning of it and now i wanna go on, but itunes says that it´s not authorized for this computer. But i watched it on this computer. So, what can i do? thanks!

Hey! I downloaded a movie from itunes yesterday. I watched the beginning of it and now i wanna go on, but itunes says that it´s not authorized for this computer. But i watched it on this computer. So, what can i do? thanks!

Log out of the iTunes Store on your device:
Settings>iTunes & App Store...tap your Apple ID, then select "Sign Out"
Reset your device:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.
After the device has restarted, sign back in to the App Store as above.

My old computer ( PC) crashed and I have a new PC now but I want to start synching my contactings and stuff onto my new computer. Itunes says it must wipe my iphone before it can synch. Is there a way to keep my contacts?

My old computer ( PC) crashed and I have a new PC now but I want to start synching my contactings and stuff onto my new computer. Itunes says it must wipe my iphone before it can synch. Is there a way to keep my contacts?

Create a dummy contact on your new PC in Outlook. In iTunes, elect to synch your contacts with Outlook. You will be prompted to "merge" your contacts. Once done and all your contacts are on your computer in Outlook, you can delete the "dummy" contact.

How to export book pdf using custom presets for all book files in indesign using javascript

How to export book pdf using custom presets for all book files in indesign using javascript.

Hi jackkistens,
Try the below js code.
Note: you can change your preset name in below (e.g, Your preset name).
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "Your preset name", myBook.bookContents, "Book_PDF", false);
example:
var myBook = app.activeBook;
myBook.exportFile(ExportFormat.PDF_TYPE, File (myBook.filePath+"/"+myBook.name.replace(/\.indb/g, ".pdf")), false, "[High Quality Print]", myBook.bookContents, "Book_PDF", false);
thx,
csm_phil

TS4526 Cable, internet, Netflix, iTunes library. Can use Amazon Video for iTunes library? Other program? OR Must have AppleTV for iTunes library?

I have purchases from iTunes movies and TV. I can play Netflix and Amazon TV. I also have TIVO thru which i connect my TV. .Amazon indicates that it can download iTunes. Can I use Amazon to play my iTunes purchases OR must I have an AppleTV device?
Also have 3 yr old large screen VIZIO hd TV. If I have to have an ATV, can I connect it through an hdmi on side panel? Or do I have to use a rear hdmi connection? How do I then connect CABLE>TIVO>TV and ATV?
Too many hdmi cables, not snuff hardware knowledge!
Thanks!
Laura

Jaap74 wrote:
Two things that are not clear
- I think it is not possible to have iTunes running at the same time on two Macs in the discribed setting.
- I think over a wireless connection, it will reduce speed.
Anyone with experience?
I think what you mean is that it's not possible for two Macs to access the same iTunes library (ie. the same collection of media files) at the same time. From my research, this seems to be the case, and that's not my issue.
In my particular situation -- one that i'm sure is shared by many others -- my partner and i have separate user accounts on the same Mac, +entirely sharing a single iTunes Library+ (ie. same media files, same playlists, etc., as if we were a single user) and as long as we remember to quit iTunes whenever we walk away from the Mac (allowing the other to log in and launch iTunes and access our common library), this is not a problem.
And that is when my particular problem arises: when we launch iTunes, we are often asked to choose a Library (a series of navigations that my partner isn't entirely comfortable with), and occasionally the Data folder on the TimeCapsule is unavailable.
As for the wireless connection to our library, this has not so far proven to be an issue. Depending on what other activities are going on at the time (ie. TimeMachine backups or background Internet activity, i presume), i have only rarely experienced brief interruptions in music streaming from the TimeCapsule (<1 second). In fact, last night, we watched a movie on the laptop, with the file streaming from the TimeCapsule, and it only hesitated a few times, and again for less than a second.
Message was edited by: William Mclaughlin

How to use multiple classes for each form

Hi,
I have created two forms using screen painter and now i want to use different classes for these two forms .
I have declared the Sbo Connection in main class i.e. Set Application ,Connection Context() but while connecting to other classes
for executing the code for that form SAP is not connected to that class.How to use multiple classes functionality i don't able to
do that.Please provide some sample codes for that as it will be more helpful for me to understand.
Thanks & Regards,
Amit

Hi Amit,
In fact, its more advisable to use separate classes for every form that you use. Have one common class, say, for eg., clsMain.cs which has all the connection and connectivity to other classes, wherein, the menu event and item event of this main class, will just be calling the menu / item event of other classes.
The individual functionality of the child classes will be called from the item / menu event of the respective classes.
Item event in clsMain.cs will be as below.
private void oApplication_ItemEvent(string FormUID, ref SAPbouiCOM.ItemEvent pVal, out bool BubbleEvent)
            SAPbouiCOM.Form oForm;
            BubbleEvent = true;
            try
                if ((pVal.FormTypeEx == "My_Form1Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                    oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                    NameSpace.Repots.ClsForm1.ClsForm1_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
                if ((pVal.FormTypeEx == "My_Form2Type") && (pVal.EventType != SAPbouiCOM.BoEventTypes.et_FORM_UNLOAD))
                    oForm = oApplication.Forms.GetForm("My_FormType", pVal.FormTypeCount);
                    NameSpace.Repots.ClsForm1.ClsForm2_ItemEvent(oApplication, oCompany, oForm, ref pVal, ref BubbleEvent);
Now, in the individual classes, you can have their respective item events, which will be called from the main class, and the respective functionalities will occur.
Hope this helps.
Regards,
Satish.

A Cocoa window which is used multiple times (for instances of a class)

Hi everyone,
I develop with newest xCode using Obj-C, Java and Cocoa.
It works perfectly to create a window and connect it to some code: I just design it, and connect it to a class which has been instantiated previously.
What I need now is a window, which is used multiple times. Means that I create a class where the window should be connected to, from which I create multiple instances.
I've seen that it works to create a class in Obj-C and just generate the window by code: it works to generate multiple windows. But how would I be able to design a window with InterfaeBuilder for a class which is not yetinstantiated? A class for which I create the instances while my app is running?
Thanks a lot for your answers!
-Lucas

Like PeeJay says, a custom window controller seems the way to go. Try creating a subclass of NSWindowController, with header something like this:
#import <Cocoa/Cocoa.h>
@interface MyWindowController : NSWindowController
IBOutlet NSTextField *infoField;
-(void)setInfoText:(NSString *)str;
@end
The implementation of the setInfoText would be something like:
-(void)setInfoText:(NSString *)str{
[infoField setStringValue:str];
Create a nib file with your window in interface builder. Drop the header file for your custom window controller into the interface builder window. Set the custom class of the nib's File's Owner to MyWindowController. You can then hook up the window and infoField outlets from File's Owner to your window.
In the body of your code where you open a new info window, add something like:
MyWindowController *windowController=[[MyWindowController alloc] initWithWindowNibName:@"nameOfWindowNibFile"];
[windowController setInfoText:@"Whatever"];
[windowController showWindow:self];
If you are going to have an undetermined amount of these custom window, it might be a good idea to store the window controller instances in a mutable array, rather than retaining instance variables for each one.
Jim

ITunes says I must use multiple CDs for a 40MB file

Similar Messages

Maybe you are looking for