Itunes Server (Synology 107+) not seen through Wireless sharing.

I have set up all my music on a server (Synology 107+).
But I can not see my music folder via Itunes over the wireless.(Airport Extreme).
I can see it if I am connected on the ethernet.
What am I doing wrong?
I HAVE GONE to preferences and checked "look for shared libraries"
I HAVE GONE to sys pref/sharing/file sharing. And turned it on.
What else is there?
Why would it see through the ethernet (and play Great) but not wireless.
ALSO I CAN mount the music folder on the server via wireless but just not in itunes.
Any insight would be great.
Also: I have a ATT Uverse Router. The Airport is hooked to the Router as is the Synology 107+ server.
thanks

I have the same issue - can use AirPlay with wired devices - wireless is hit or miss; mostly miss... Using Netgear WNDR3700v2. Did you fix the issue?
Anyone else has any advice?

Similar Messages

I have an iPhone 5c and want to play songs that are stored on my PC iTunes library, but were not bought through iTunes. How do I do this?

I have an iPhone 5c and want to play songs that are stored on my PC iTunes library, but were not bought through iTunes. How do I do this?

Hi there eramhar,
It sounds like you are wanting to sync your music to your iPhone. If so, you may find the information in the article below helpful.
iTunes 11 for Windows: Set up syncing for iPod, iPhone, or iPad
http://support.apple.com/kb/ph12313
-Griff W.

HT2188 I just got an iPad mini, when I try to upload my iPhone backup from my Mac i get the message to upgrade my iTunes. I can not seen to find where the download link is for iPads on apple website. Can anyone help?

I just got an iPad mini, when I try to upload my iPhone backup from my Mac i get the message to upgrade my iTunes. I can not seen to find where the download link is for iPads on apple website. Can anyone help?

The message is referring to iTunes on your computer, not the iPad : http://www.apple.com/itunes/download/
The built-in apps on the iPad can only be updated via iOS updates, so if your iPad mini is on iOS 6.0.2 then its up-to-date

My itune music videos will not play through my soundlink air

Why do my itune music videos not play through my Bose Soundlink Air? My downloaded music plays fine. Also my music videos play through my iTouch its just through my Mac computer they won't.

I have had a almost identical problem but with windows 8 and with the internal speakers because i am using a laptop

MF4890dw not scanning through wireless with win7,win8.1 or OSX 10.9

I use iMac with OSX 10.9.2. I installed latest version of MF Toolbox, upgraded the firmware to 15.04. I can scan with USB. Wireless works because I can print with wireless. However, when I disconnect USB and try to scan through wireless network, either from iMac or from MF4890dw, it will scan the first page and hangs for a while, then MF2890 will show "An error has occurred [close]" and the computer will pop up an error window:
"Cannot communicate with the scanner.
The cable may be disconnected, or the scanner may be turned off.
Check the scanner status and try again.
Scanner driver will be terminated.
Error code: 200010"
When I use with win 7- 64 or win8-64, I also get the same question.
"Cannot communicate with the scanner.
The cable may be disconnected, or the scanner may be turned off.
Check the scanner status and try again.
Scanner driver will be terminated.
Error code: 155 0 0"
Any help is appreciated.

Same problem here, with Windows 7. Appeared out of nowhere. Reinstalling drivers and MF Toolbox did not help.

MF4890dw not scanning through wireless

I use iMac with OSX 10.9.2. I installed latest version of MF Toolbox, upgraded the firmware to 15.04. I can scan with USB. Wireless works because I can print with wireless. However, when I disconnect USB and try to scan through wireless network, either from iMac or from MF4890dw, it will scan the first page and hangs for a while, then MF2890 will show "An error has occurred [close]" and the computer will pop up an error window:
"Cannot communicate with the scanner.
The cable may be disconnected, or the scanner may be turned off.
Check the scanner status and try again.
Scanner driver will be terminated.
Error code: 200010"
MF4890dw is communicating with iMac because it will scan the first page and it will tell me to put paper in the feeder.
Any help is appreciated.

I'm having the same error on my 4880 wireless. It previews the scan but it comes up with that **bleep** error. Why hasn't the tech responded? Clearly his generic answer didn't help.

Can I move an iTunes library from Comp1 to Comp2 through Home Sharing? What happens with the first sync? What happens to 3rd party app data (specifically, game scores/levels)?

I need to move an iTunes library from Computer 1 to Computer 2. Can I do this through Home Sharing, by dragging and dropping library items from one to the other? The library consists of iTunes purchases, home shared items and music/movies from our personal collection. Both computers have had all the accounts authorized, so I don't anticipate an issue there. I'd like to do this so that my son's ipod is impacted as little as possible -- specifically, his game scores/levels and other 3rd party data remain intact after the 1st sync and the organization of his icons remain intact.
Is there a way to do this smoothly and easily, protecting his ipod data/organization?

Sorry, I obviously wasn't clear. If you replicate the library from Computer 1 to Computer 2 by copying it, then all will be well. I routinely sync my iPhone and iPad both at home and at work using a single library that I migrate between the two locations via an external drive which is kept up do date using SyncToy.
Backup the iPod touch on Computer 1.
Copy the entire iTunes folder from Computer 1 to Computer 2, replacing any existing iTunes folder on Computer 2.
Check that content is accessible in the migrated library. (Won't be a problem for a standard iTunes library where all the content is inside the iTunes Media folder which in turn is inside your iTunes folder).
Connect iPod touch to Computer 2.
Sync.
In the unlikely event that something goes wrong (it won't) then you can connect the device back to Computer 1 to restore it.
Note device backups are not stored within the iTunes library and stay on the machine on which they were created. It is theorectically possible to migrate them but there isn't really any point. Once you have synced the iPod with the copy of the library on Computer 2 then Computer 2 will make its own backup of the device.
tt2

Why are my audiobooks not going through home sharing?

why are my audiobooks not going through for home sharing.

According to this thread (https://discussions.apple.com/thread/3525692), it looks like you are not able to share audiobooks through Home Sharing:
You can share MP3, AIFF, WAV, AAC, and radio station links, but you cannot share iTunes Store Audio Books, Audible spoken word content, or QuickTime sound files.
You can leave iTunes feedback here: http://www.apple.com/feedback/itunesapp.html

Apple TV 2 is on the network but not available through Home Sharing or AirPlay

My ATV2 has been working well for many years but recently won't connect through Home Sharing. It is on the same network as my Mac and I can rent through the iTunes Store, connect my YouTube account etc but it doesn't appear on any devices as an AirPlay option. I'm logged in using the same Apple ID on all machines and devices. I've restarted the ATV2, iTunes, my Mac, my router and checked that everything is running the latest software. They all were except for iTunes, which I updated (12.1), but it had no effect on the problem. I had not recently made any changes to any device or software, that I'm aware of.
It did briefly work (no change made) a day later but wouldn't connect the next time I tried. I've spent the last few days trying to find a solution and found nothing.
Any advice on how to progress?

Hi Darren,
Thank you for contributing to the Apple Support Communities.
It seems like you're not able to access the iTunes library on your Mac from your Apple TV using Home Sharing.
Restarting all of the devices and updating software are good troubleshooting steps, and next I'd recommend turning off Home Sharing on your Apple TV and Mac, and then back on again.
If necessary, you can refer to these links for Home Sharing setup:
Setting up Home Sharing for Apple TV (2nd generation and 3rd generation) - Apple Support
iTunes: Setting up Home Sharing on your computer - Apple Support
If the issue persists, you may also want to double check your network/router settings using steps four and five in this troubleshooting guide:
Troubleshooting Home Sharing - Apple Support
Best Regards,
Jeremy

Voice Memos will not play through Home Sharing on other devices.

I have synced my voice memos to my Apple library on my Mac Mini and can listen to them on that device with no problem. However, when I use my iPad or MacBook or Air to play the memos using my Home Sharing the voice memos will not play on the device. Sometimes a random song will start instead of the voice memo. I can play videos and music through Home Sharing with no problems, it seems to be only the voice memos that won't stream to the connected devices. Any help would be great (using Yosemite on devices).

I'm running 4.3.3 on mine and just played Joe Ely's latest album on my 1st generation Zeppelin. I do get the message about it not being compatible and possible noise but I dismiss that and play the music.
You may need to reset your Zeppelin (disconnect it from power, wait 2 minutes, plug it back in), Reset you iPhone (hold down the sleep and home buttons, ignore the red Off slider, wait for the Apple logo, let go of the buttones) or do both.
You may also need to update the firmware on your Zeppelin if you have not done so before now.
Message was edited by: deggie

RDP to a Terminal Server via TTPT not working through routers.

I am having problems using RDP to a terminal server through a user home router and DSL connection.
User has a Linksys WRT5G v3 (Firmware 4.21.1) connected to a Cisco 678 DSL Modem.
If I direct connect the home computer to the Cisco DSL Modem everything works fine. When I try to go through the Linksys, I can get the PPTP authenticated but the RDP client just times out.
It would seem like this is a port forwarding issue, but I have tried to use the port forwarding to the IP address of the home computer(statically assigned) by forwarding ports 47, 1723 for the PPTP and port 3389 for RDP.
I have seen the same issue on my home Broadband cable setup with a NetGear Router. Having spent over an hour with the NetGear technical support without resolution. I swapped in a old Linksys Wireless Router BEFW11S4 v4 (firmware 1.52.02) and it fixed the issue.
What is the issue with some home routers letting RDP out? Is there a known model that it will work on?

I believe I have found what my issue is. The older Linksys BEFW11S4 model has a “hard coded” DHCP Server Start IP Address range of 192.168.0.X you can only change the last octet. The newer Linksys WRT5G and WRT54Gs have a “hard coded” DHCP Server Start IP Address range of 192.168.1.X.
Apparently this is their “dumb downed” solution for home routers. They do not allow you to select a different subnet to hand out with DHCP but interestingly they do allow you to fully configure the LAN IP address.
How this affected me is that my target server/network uses the same 192.168.1.X addressing scheme.
I was able to use the newer router by configuring the LAN address to like 192.168.0.200 and turning off the DHCP server. Then I assigned a static IP address to the computer in the home network to something like 192.168.0.250. Then I could successfully use PPTP and RDP to connect to a terminal server.

Home sharing not working through wireless

I have a D-Link DIR - 855L router and my Library will not display on my wireless devices (A Roku soundbridge and a Grace Digital Mondo(. If I connect wired to my network I can see the Library on both devices. I have upnp enabled and Multicast streams. I have turned media sharing on in Windows 7 and both devices are listed on my network when they are connected through wifi. I have also tried manually forwarding the iTunes ports and reserving IP addresses for all devices.

I have the same issue - can use AirPlay with wired devices - wireless is hit or miss; mostly miss... Using Netgear WNDR3700v2. Did you fix the issue?
Anyone else has any advice?

HP Photosmart Plus e-All-in-One Printer B210e Does Not Print Through Wireless

I am using Mac OS X 10.7.3 on a wireless connection. I went to print, HP Utility gave me the following error message:
The printer may not exist or is unavailable at this time
It was not being used by anything else at the time. Then 2-3 minutes after I got that first error message HP Utility gave me another error message:
The printer is not responding
Then on the printer touch screen display I touched the wireless icon, chose Run Wireless Network Test, and got an error message:
Load paper into Main Tray.
The tray had plain white paper (10-15 sheets) in a nice neat stack as far back as it would go. I took the stack just to be sure it was still in a neat stack and put it in as far as it would go and pressed OK on the touch screen display and I still got the same message. Then I decide to turn the printer off using the power button, waited about a minute, and then pressed the power button to turn it on. When I did I got another error message:
Improper Shutdown
To avoid damage, use On button to shut down. Do not unplug the power cord or turn off the power outlet to shut down the device.
How is that an improper shutdown when I did use the power button to turn it off. Why is it telling me that I need to use the power button to turn it off then back on when I did use the power button to do that. What is the issue and how do I fix it. I did not have this issue with Mac OS X 10.7.2, but I do now agter the 10.7.3 update. As of right now the only way I can print from Mac OS X is using a USB connection. I can print through a wireless connection using my Windows 7 partition on the same MacBook. I am starting to think that this printer is not Mac OS X 10.7 Lion compatible.
I have a Time Capsule (3rd Generation) with the current firmware for it and the current the current AirPort Utility for Mac OS X installed.

SthrnDixieCowgirl wrote:
I don't know how to remove and add printers unless I had to format my hard drive for a completely different reason and reinstalled the printer that way.
To remove the printer, open System Preferences > Print & Scan. You will see the HP in the Printers list. Click on it once to select it and then press the minus button under the Printers list to remove it.
With this done, click the plus button under the Printers list to add the printer. With the Add Printer window open and the Default view selected, the HP should appear in this view. Select it and the Print Using menu should change to the supporting printer driver. When this happens, click the Add button to complete the creation of the printer queue.
SthrnDixieCowgirl wrote:
I have heard other people have issues with 10.7.3 for other reasons and I should have waited until 10.7.4 came out before updating and I didn't and now there is nothing I can do to go back to 10.7.2
You cannot believe everything you read. For every person that had a problem after installing the .3 update, a hundred more had no problem.
But if you wanted to go back to 10.7.2, then you can use Time Machine to do this. If you are not using Time Machine then you need to start doing so. At least the update only stopped you from network printing. What if it had stopped you from using the Mac?

Nvarchar(max) of sql server 2005 is not accessible through Oracle DB Link

hi,
i have created the DB LINK from Oralce 11gR2 to MS Sql Server 2005,
am able to access the view of Sql Server from Oralce,
but the Columns which have Datatype nvarchar(max) in Sql Server am not able to access through DB Link.
can anybody know about this issues?

Pl do not post duplicate threads - Datatype nvarchar(max) not accessable (DB Link from Sql 2005 to Ora 11gR2 )

Vlan traffic is not passing through Wireless Bridge

Hi,
Recently we have placed wireless bridge in our network (Cisco AIR-BR1410A-E-K9 model). Now after installing the bridge we are facing the issue like only the management interface traffic is reachable through bridge, but not able to reach other vlan traffic.
like management range is in vlan 1 (which inlcudes AP' Switch and router) and the bridge IP's are also in Vlan 1.
Switch port is kept in trunk mode both ends of bridge. still other vlan traffic is not reachable, do we have to place any special configuration for this ?
all the business users are in Vlan 3
all the sale team users are in vlan 123.
now problem is other end switches are reachable for me through bridge that is in vlan 1, but vlan 3 and vlan 123 are not reachable for me.users are not getting IP's, when we assigned the static ip address and tested still it is not working.
i am attaching my wireless bridge configuration in the discussion, please help on this issue.
Root Bridge ---- Non--Rootbridge--- Cisco Switch--Cisco Switch..
now i am able to those two switch also, but not able to reach the vlan 3 users who are connected to that switches.

Hi,
infrastructure-ssid has been placed at both end still not able to get IP's to the devices.
I am not able to attach txt files in the reply, could you please let me know your email ID so that i will send the config files to your ID.

Itunes Server (Synology 107+) not seen through Wireless sharing.

Similar Messages

Maybe you are looking for