ITunes setup/installation not loading (Windows 7 64 bit)

So I uninstalled iTunes because it wasn't able to recognize my iPhone for some reason even though Windows would (and it could be viewed in the 'Computer' folder). At first I could take pictures off of the phone by navigating through these folders: Computer/Apple Iphone/Internal Storage/DCIM (this is the usual way I take my photos off my phone, I don't sync them through iTunes). But now even that folder is empty and I can't export pictures from my phone either along with still not being able to use the syncing options in iTunes.
So either the issue is with the phone (as I have dropped it recently) or iTunes. I uninstalled iTunes to make sure it wasn't iTunes fault. And now I can't reinstall it. This NEW and bigger issue happens when I open 'iTunes64Setup'. After opening this file, Windows asks me "Do you want to run this file?" (usual security question) and I press the Run button like I usually would.
This is were the issue happens. After I press 'Run'. Literally nothing happens. The security question page disappears and you would expect the setup page to appear after but literally nothing happens. The computer doesn't even start lagging or anything along those lines. Its like as if I pressed the cancel button rather than the run button.
I was later told that I should delete all other iTunes related programs (4 of them to specific: Bonjour, Apple Software Update, Apple-Program Support, and Apple Mobile Device Support) before reinstalling iTunes. I uninstalled all 4 but AMDS does not uninstall (perhaps the syncing issues are because of this program and not iTunes). I use the usual method to try and uninstall. I double click to uninstall in Control Panel and a small window called 'Windows Installer' appears and the page says "Preparing to remove". Once this page disappears (after the green bar fills up and then for some reason emptys!?). So AMDS does not delete. I gave up and tried reinstalling iTunes again any way after deleting the other 3 Apple programs. I also tried uninstalling quicktime and restarted the computer many times. I also tried using Revo Uninstaller to uninstall AMDS but it doens't even appear in that list.
I still have the same issue. After the Run page of the setup nothing else appears.
I have also tried downloading older versions of iTunes using oldapps.com. All of those present the exact same problem after the security question page. I really badly need help reinstalling iTunes. Some one please help me. Would be much appreciated.

but AMDS does not uninstall (perhaps the syncing issues are because of this program and not iTunes). I use the usual method to try and uninstall. I double click to uninstall in Control Panel and a small window called 'Windows Installer' appears and the page says "Preparing to remove". Once this page disappears (after the green bar fills up and then for some reason emptys!?).
Let's try the fixit from the following Microsoft document with that one:
Fix problems with programs that can't be installed or uninstalled

Similar Messages

Ipod shuffle 2 nd gen itunes 9 ipod not recognised (windows 7 64 bit OS)

Hi
I see that others are having issue. My problem is that I have windows 7 ultimate installed (64 bit) along with itunes 9 (64 version) . When i plug in my ipod shuffle 2nd gen 1gb I get the following message " the software required for communicating with ipod and mobile phones is not installed properly. Do you want Itunes to repair this for you?'
Say yes reboot - same error message .Connect ipod not recognised.
Have reinstalled itunes 9
Have also uninstalled itunes and reinstalled
gone to portable devices under device manager to update drivers still issues
Is anyone getting the same error message and is there a solution
really frustrating !!!

I'm having the same kind of problem and haved tried pretty much everything my self. We have two computers. One with Vista and the other with XP pro. We have three iPods.
80g video, Touch first generation and touch second generation. Everything works fine with the first two, but windows cannot find the driver for the 2nd generation touch. Altough all drivers seem to be installed. The problem started with the Vista computer. I've uninstalled and re-installed everything and nothing works. Took everything on the XP computer, and the 2nd generation touch is still not recognized.
Of course I-tunes is up to date and all drivers as well.

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
I hope this helps you and any other users.

TS3074 When trying to install itunes on my windows 7 computer i get the error itunes setup is not a valid 32bit application. Any ideas to rectify please?

When ntrying to istall itunes on my windows 7 computer I get the error message pop-up "itunes setup is not a valid 32bit application" . Can anyone help please?

Let's try the following document with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Installation problem because errer message of "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE"

Respected Sir,
My name is Md. Naushad, contact No- 9436507010.
Sir, hamara ek shopping mall hain, jismein ek server and 5 nos. cash counter clint pc hein, server ju computer hein ismain hamne WINDOWS SMALL BUSINESS SERVER 2008 original os use kar raha ho, yein server calte hue humnein pehele bhi 3-4 bar format korke
dubara ready kiya tha, job koi problem huta tha tu, kuch din pehele se server mein firse problem ho rahi thi (server open nehi hu rahi thi, tu hamne data backup leke pehele jis tarha se server install kiya tha usi tarha se humne install karne ki kusis ki tha,
tu jab humne windows small business server 2008 software ka original disc-1 se installation start karti hu tu kuch der install huke ek error message aaa rahi hein, ju ki "WINDOWS SETUP COULD NOT CONFIGURE WINDOWS TO RUN ON THIS COMPUTER'S HARDWARE."
yein message aa rahi hein, jiske baad server installation bech mein hi band hi jati hein, jiske karon hum server ready kar nahi pa rahi ho, so plz help me, ta ki mein server ku firse install kar sakti ho.
we wait for ur valuable response, plz help us sir.
Thank u.

Hi,
Sorry for my delay.
Based on the error message, please refer to following similar thread and KB, then check if can help you.
SBS
2008 SP2 " Windows Setup could not configure Windows on this computer’s hardware"
“Windows Setup could not configure Windows on this computer’s
hardware” installation error on a Windows 7-based or a Windows Server 2008 R2-based computer
However,
please understand that these forums will provide support in English. Since we do not familiar with this language which you use to describe this issue, it is very difficult
for us to help you with your question. If you could ask your question in English, I will be very happy to help.
If the issue is urgent to your business, it is recommended that you contact Microsoft Product Support Services
via telephone so that a dedicated Support Professional can assist you recover the server in a more efficient manner. Please be advised that contacting phone support will be a charged call.
To obtain the phone numbers for specific technology request please take a look at the web site listed below.
http://support.microsoft.com/contactus/?ws=support&ln=en-us
If you are outside the US please see
http://support.microsoft.com/ for
regional support phone numbers.
Thanks for your understanding.
Hope this helps.
Best regards,
Justin Gu

After downloading latest quicktime update, itunes store will not load

Has anyone had this same problem after downloading latest quicktime update. iTunes store will not load.

This happened to me today as well post installing the latest version of itunes. I did a search on google for the error and came across a recommendation to :
Note: Start Windows in Safe Mode to complete any of the following steps if you're unable to access Windows normally due to the msvcr80.dll error.
If, and only if, you're receiving the msvcr80.dll is missing error when you open Apple iTunes, do the following: (skip this step if your msvcr80.dll error is occurring with a different program)
Uninstall from Windows the following five programs in this order: iTunes, Apple Software Update, Apple Mobile Device Support, Bonjour, and finally Apple Application Support. If you have iCloud, remove it as well.
Uninstalling these programs in Windows is done from an applet in Control Panel called Programs & Features (in Windows 8, 7, or Vista) or Add or Remove Programs (in Windows XP).
Note: Songs and playlists in iTunes will not be removed when you uninstall the iTunes program or any of the other, already-mentioned Apple programs. If you'd still like to back them up, they're usually located in the My Music folder in Windows.
Download the latest version of iTunes from Appleand note the location you're saving it to so you can find it once it's done.
Run the iTunes installation as an administrator. If you're not sure how to do that, see How Do I Open an Elevated Command Prompt? for help. That procedure shows you how to open the Command Prompt program as an administrator, but the steps are essentially the same for anything, including the iTunes installation package you just downloaded.
A general overview of removing and reinstalling iTunes can also be found here on Apple's site but the above procedure seems to work better in this particular situation.

Windows setup could not configure windows to run on this computer hardware

As I was trying to reinstall win 7 on my HP Pavilion dv6-7028tx Enterta laptop, upon competition, I was given this message by win7 saying that " windows setup could not configure windows on this computer's hardwear".
I did some research on this issue, it appeared to be the lack of SATA drivers on my computer.　
Could you please advise me which intel SATA driver should I installed to fix the problem?
If this method doesn’t work, then can you please tell me how to change the BIOS hard disk drive setting to AHCI or IDE?
Many thanks
This question was solved.
View Solution.

Hi:
You can't change the drive controller setting in the BIOS on any HP consumer notebook made in the last 5 - 6 years or so.
See if this works...
Download the drivers from this link below (first file listed -- 64 bit).
https://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&ProdId=2101&DwnldID=23060&keyword=Intel+Rap...
Extract (copy) the files onto a usb flash drive without any folders.
With the flash drive and W7 installation media in the machine, boot from the W7 installation media.
After you select the install now option, select the Drive Options - Advanced menu, then select the Load Driver option.
You should now see the storage driver files listed.
If you check the box, it will only include the compatible driver.
Follow the prompts and hopefully, W7 will install.

The iTunes store does not load when I open it

So I recently had to install the latest version of iTunes after I upgraded to the newest version of iOS on my iPhone 4 (iOS 6.0.1) because the older iTunes version wasn't compatable with the newest iOS version. I had been using a much older version of iTunes becuase every time I would update the iTunes store without fail would stop working. I spent almost an entire day trying to fix it like 6-8 months ago and I finally got it to work with one of the older versions, which was why I was mad that I had to update it again.
Anyways, the iTunes store will not load at all. Everytime I open up iTunes on my computer (I have Windows Vista) and I try to go to the iTunes store, it never loads. It keeps saying "Accessing iTunes Store" (see image). I have tried to wait it out, but nothing ever changes.
I have already tried reinstalling iTunes and tried reinstalling the newest version, neither of which helped. I also tried what they suggested at http://support.apple.com/kb/TS4123 but the only item that came up under the Winsock Providers tab was the Apple one.
Not sure what else to do. Any suggestions?

That's exactly like saying, "Hey, try this. It didn't work either. Good luck!"
It's the high-percentage play with the particular symptom set being reported. High-percentage implies that it doesn't work for some people. (Otherwise it'd be a 100% play.) So, it still makes sense for people to try it, even if it doesn't work for some people, because it does work for most people. Check other posts by wiclee using that set of instructions to get a better feel for the reliability of the advice in these circumstances. (Granted, that's a bit tricky given that only about 10-20 percent of people report back to say whether or not any advice (on any given topic) actually works.)

I tried loading itunes 10.5 onto my window vista 32-bit. it finishes the download and then when i go to install it say an error occured. Can someone help plz?

I tried loading itunes 10.5 onto my window wista 32-bit. It finishes the download and when i try to install it. I says that an error occured while trying to install.
Can somebody help me plz?

Hi all, I know this is a very old thread, but I was battling this issue for awhile and wanted to provide my solution in case future users encounter a similar issue.
I am running Windows 8. I encountered this issue while trying to install iTunes 11.1 x64 version. After some troubleshooting, I discovered that the real issue was trying to install the Apple Mobile Device service.
My resolution was installing the Microsoft Visual C++ 2005 Redistributable Package. It is available from Microsoft. A search on Google should reveal it. However, here is the latest link that I used: https://www.microsoft.com/en-us/download/details.aspx?displaylang=en&id=14431
Note that redistributable packages for more recent versions of Visual C++ (eg 2008, 2010) will NOT work. Only 2005 version worked for me.
Good luck!

Itunes store will not load to create a new account

There are four members of my family. Each family member has their own Windows user account, three with an itunes account. I have been trying to create an account for my youngest son for three hours. The itunes store will not load and gives a "not connected" message. The internet is working fine, and all three of the rest of us can access itunes and the store. I have turned off all parental controls that could have been messing istore up. How do I fix this?

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

ITunes store will not load. Im at a loss

For about 3 days now the iTunes store will not load. It merely reaches this point:
+One Moment Please.+
+Connecting to the iTunes Store.+
Loading
+If iTunes doesn't open, click the iTunes application icon in your Dock or Windows Task Bar.+
(note this message is not from Safari it is from the iTunes Store window in iTunes) I have looked at the FAQ on this site and it's best suggestion was to reset the keychain which I have done, and to check that I have the latest iTunes which I think I do. (iTunes 9.0.3 (15)) Yet it has not worked.
When I try to update my applications for my iTouch it comes up with a message box saying:
+Could not complete the iTunes Store request. The store may be busy.+
+Check your Internet connection or try again later+
As I said I have waited 3 days for the iTunes store not to be busy. I'm fairly new to macs so don't even really know how to go about diagnosing the issue or posting logs for you guys to look at if that would even help?
So your advice would be appreciated.
Thanks
Brad

iTunes 9+ uses the Safari 4.0.3 or higher engine to connect to the iTunes Store. Check if your Safari is up to date. If you need an update, get it here (be sure to tick the Snow Leopard version): http://www.apple.com/safari/download/
Also, check in Safari > Preferences > Security and check that your cookies setting is either Always or Only from sites I visit.
If your problem still persists, look at this document for some solutions: iTunes for Mac: Possible iTunes Store errors, http://support.apple.com/kb/HT1412

ITunes Store will not load. Upgraded, diagnostic is ok, can get radio.

I've upgraded iTunes. I've run the diagnostic and it's ok. I can get the radio stations to play, but the iTunes store will not load. It takes about 3 minutes to "access" and then I get the Apple logo in the yellow top loading bar, and "iTunes Store" in the display area. No other messages. However, when I right click the iTunes icon on my computer (Windows Vista) and run as administrator, I get access to the iTunes store, but my music library has only 15-20 songs in it. Any help would be appreciated.

Hey, I read another discussion with the same issue and did a winstock reset. I thought it didn't work so I got ****** off an shut the computer down with yet another failed solution. When i logged back in it worked. Finally. I've been with out itunes store for over a month.

Itunes Store is not loading..can't create an account.=c

I have read a lot of discussions here to resolve my issue, but I came up with the same result.. my itunes store is not loading. It was working very fine before but now, it really doesn't load. I want to make my newest and first account in itunes store, but it says, "Itunes Store maybe busy. Please check your internet connection".. I have been experiencing this for 1 week now.
I also ran a diagnostic and it says:
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Hewlett-Packard HP Pavilion dv2000 (RR096EA#ABV)
iTunes 8.2.1.6
QuickTime 7.6.2
FairPlay 1.4.10
iPod Updater Library 8.1d19
CD Driver 2.1.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.5.2.2
Apple Mobile Device Driver 1.43.0.0
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number ADD5E1CA6820301F
Current user is an administrator.
The current local date and time is 2009-09-02 06:30:23.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 945GM Express Chipset Family
Mobile Intel(R) 945GM Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {18FD773A-1BC0-448B-A6EA-214EF698B868}
Description: Bluetooth LAN Access Server Driver - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 03:00:03 1970
Lease Expires: Thu Jan 01 03:00:03 1970
DNS Servers:
Adapter Name: {C7180C43-EAD0-46A8-89D5-CFE98C4D50C8}
Description: Intel(R) PRO/Wireless 3945BG Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.100
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Wed Sep 02 05:46:42 2009
Lease Expires: Thu Sep 03 05:46:42 2009
DNS Servers: 212.77.192.59
212.77.192.59
212.77.192.60
Adapter Name: {0D0E9D39-60BC-4AF4-BA21-8C019D6D8FED}
Description: Intel(R) PRO/100 VE Network Connection - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sun May 03 22:17:25 2009
Lease Expires: Mon May 04 22:17:25 2009
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was successful.
Secure connection attempt to iPhone activation server was successful.
Last successful store access was 2009-09-02 05:33:11.
Thanks for your help.

Close itunes
Check your internet settings.
Control Panel – Internet Options – Advanced
Check SSL 3.0 and TLS 1.0
Uncheck “Check for server certificate revocation (requires restart)”
Click Apply
Click Okay
Open itunes and try again.
You will need to allow itunes in your security software firewall.

When downloading, says iTunes Setup is not a valid Win32 application.

When downloading, says iTunes Setup is not a valid Win32 application. How can I fix this?

In the course of your troubleshooting to date have you worked through the following document?
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

K7N2G will not load windows xp with any type of dvd/cd drive installed?

This is on my old computer, the specs are as follows
k7n2g
athlon 2600+
radeon 9700 pro
Caviar SE wd800
1gb samsung ddr333
It does not matter if it is keyed as master or slave, primary or secondary my old k7n2g will not load windows with a cd drive installed. I have tried three different drives and everything that I can think of, changed cables, channels, drives, everything. Windows just hangs. I cannot even get into safe mode. Is this an IRQ problem? The drives keeps trying to eject themselves, no matter what kind I use. This has never happened before, but there was a point before this problem where the vga wouldn't kick on (at the login screen) until I hit eject on the cd drive. This is driving me crazy and I have a girlfriend who just has to play her stupid sims and will not stop bothering me about it. PLEASE PLEASE PLEASE help me!
Thanks
Chris
PS here is my NEW workstation (I couldn't be happier to get rid of the old system)
two Opteron 250 90nm
2gb 2-3-2-6 Corsair Reg/ECC DDR 400
Tyan Thunder K8WE
1x BFG 7800GTX OC (one for now)
Audigy 4 Pro
Seagate Cheetah U160 10k 73.4 gb
Atlas V U160 18.3 gb
Lite on Dual Layer burner

Your Tyan based hardware listing on the first post has no relevance to anything, and might only serve to confuse. Please remove it and put the hardware you are trying to troubleshoot in a signature. Look in your profile>Forum Profile Information and enter that in the Signature box. That way we wont have to scroll to hunt down your hardware specs
So let us get this straight.
This system used to work fine? Yes? Then what prompted you to reload the OS?
You mentioned that didn't happen when you owned it. Are we to assume that at some point you sold or gave parts of this system to someone else? If so, what changed?
A little more history might prove useful in helping us to give you better suggestions.
Look at the PSU and give the Amps for the +3.3, +5v, & +12v lines.
***Edit, from what I see on the net, that is a dual rail PSU and the amps are as follows:
+3.3V@22A, +5V@21A, +12V1@18A, +12V2@16A
Is this correct?
Both the 3.3 and +5v seem a little low to me, but I am not entirely convinced that would be your problem. However, the fact that the 12v rails are split, can lead to other problems such as overvoltage protection circuitry getting in the way. Especially if the 16amp 12v rail is overloaded.
This is something to consider. Just because it is supposedly capable of wattage over it's rated power output doesn't mean it can handle what you're throwing at it all at once. If you have a single rail PSU that has at least 18 amps on the 12v rail to test with, we could almost definitively rule out power as the sole problem or a contributing factor.
I have never had a CD rejected, but if you could be more detailed about what you have connected to the board while attempting to load the OS, and then a detailed description of at what point the OS installation fails, and the CD is ejected, that would be helpful as well.
The fact that you've tried several drives, cables, with the same result. And also had a blackscreen event, does point to at least one problem that could point to a power issue. The CD rejection issue is foreign to me since I usually use the same type of PSU in all my builds or ones that I know work with a particular set of hardware, so I can't attribut that to a power issue.
Did you try clearing the CMOS and then initialize the default settings?
Do you have a cheap AGP card to try instead of the 9700?

ITunes setup/installation not loading (Windows 7 64 bit)

Similar Messages

Maybe you are looking for