ITunes sharing just NOT working! Please help!
I can't seem to get iTunes to find shared music on the network, or share my music.
-I'm using iTunes version 6.0.1.3 and Windows XP with SP2
-I have tried adding the ports 3689 and 5353 to the firewall port exceptions
-After researching for awhile on here, I recognized the name Bonjour. I saw it in the firewall port exceptions list. I checked Program Files to make sure it was there, but alas, it was not. I downloaded Bonjour from apple, but still, not working.
Any ideas? I'm positive that I would be able to see shared music if it was working, I just switched computers, and the old one worked fine.
Thanks in advance,
Jess
The only firewall that is in use IS the Windows firewall. Thank you for helping though!
Anymore suggestions?
I probably should reinstall iTunes. If I do, will my library/playlists/smart playlists be totally intact? Like, after the reinstall will it look the same or will I have to reimport everything?
Thanks,
Jess
Similar Messages
-
Time Capsule and iTunes set up not working, please help.
I have moved my itunes library to my time capsule and changed my itunes preferred path to its time capsule location. However when I restart my apple laptop, after having shut it off for the night, and open itunes (time capsule is visible and accessible to the laptop), itunes has reversed the preferred path I set to point to my time capsule to my local laptop hard drive instead. Any advice would be greatly appreciated.
I have looked in other discussions concerning lost itunes file paths, however I never had this issue with my wired external drive; and I only start iTunes after I am sure that my computer can access the files on my time capsule. Thank you.
My laptop is a Macbook Pro 2.3 Ghz running Mac OS X (10.5.2)If you're still experiencing "disconnects," even with the earlier firmware, but not experiencing these at all when directly connecting your computer to the modem, there is a good chance that one of the following may still be the problem:
o Bad Ethernet cable between the D-Link & TC.
o The TC is faulty.
o The D-Link is faulty.
o The TC & D-Link are just not compatible with each other.
o The ADSL signal strength, coming from your ISP into the D-Link, may need "tuning."
I'd start with trying a known good Ethernet cable. If that doesn't resolve the problem try contacting your ISP/ADSL-Provider next to see if they can run a ADSL line diagnostic to verify that there is a good signal to the D-Link; While you have them on the line, see if they can provide you with another modem.
Finally, if available to you, try temporarily replacing the current TC with another TC or another wireless router. -
Itunes store link not working PLEASE HELP!
I can't connect to the itnues music store and get the following error message when I try:
itunes could not connect to the Music Store. The network connection was reset. Make sure your network connection is active and try again.
If anyone could give me advice on what to do I would be very grateful!!!! Oh, you might have to explain things in very simple terms. My IT knowledge is pretty basic.
Thanks
Stewi havent seen to many posts on this topic so its not a major problem i guess but it driving me insane!!!!! PLEASE SOMEONE HELP!
-
ITunes 11 Genre not working, Please help fix
Here is a quick video of the problem I have: http://youtu.be/BjPZNnCjJg8
I update to iTunes 11 and the new genre view is messed up. The Pop, [Pop, Rock and [Rock aren't together. Anyone know how to fix it. At the moment if I want to play a song by a genre then I use the song view, so I'm not to fussed about this problem.
Sorry about the quality, it was recorded on my iPod Touch 4.The only firewall that is in use IS the Windows firewall. Thank you for helping though!
Anymore suggestions?
I probably should reinstall iTunes. If I do, will my library/playlists/smart playlists be totally intact? Like, after the reinstall will it look the same or will I have to reimport everything?
Thanks,
Jess -
Itunes 9.2 not working please help
i am trying to upgrade my itunes so that i can updated my software for my iphone but everytime i try to download itunes 9.2 a sign pops up that says
Windows has found a problem with this file. And the publisher is unknown.
At the bottom it reads: The file was blocked because it does not have a valid digital signature that verifies it publisher.
Can anyone tell me how to fix this???Try downloading via a different browser.
If you are using a WiFi network, try plugging in instead.
Some people have found that the problem is in the router - try restarting it.
But the simplest thing is to get a friend to put a known good copy of the iTunes installer on a memory stick for you. -
I backed up my Iphone to itunes so i can do the new Update to IOs 7 and so now that i updated it i want to backup and restore and its not working, Please help!
An iPhone backup to a computer via iTunes stores the photos in a backup file that is only meant to be be used if needed to restore back to the phone. There is 3rd party "extractor" software available but otherwise the photos are not directly viewable.
The backup via iTunes was a good idea and your Camera Roll photos should be there and should be able to be restored to your new phone. However if it was me I wouldn't rely on that alone. I would also import the photos to a computer where you can see and verify that you have a copy. That is a good idea at any time (not just when you know you might need it). Any phone can be lost, broken, suffer hardware issues, etc at any time and lose all data on it. Following is a link with information on how to import the photos to a computer: Import photos and videos from your iPhone, iPad, or iPod touch to your Mac or Windows PC - Apple Support -
my itnues for pc is not working it shows that iTunes has stop working,I have downloaded Itnues many times but still it is not working, please help me
Please helppppp
-
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
Hi,my name is Hemanth.Im using ipod touch and my ipod is not detecting in itunes but detecting in my computer.Im using windows7 os.I tried the troubleshooting process given in web but still it not working please help me.
Did you try everything here:
iOS: Device not recognized in iTunes for Windows
Then try a different computer to help determine if yo have an IPod or computer problem. -
this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
is there any other method to download ios 6.1.2.
my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
kindly help.
thankswell in thatcase, i need another help .
thanks for your instant reply.
i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone. -
Hp DV6 TouchPad Lock Button Not Working Please Help.?
I just bought my hp dv6 6c4se entertainment notebook. but the touchpad on and off button is not working.please help.yes there is a little white sqaure in the left up corner of the touchpad.but it doesnt work.please help somebody
Try a Hard Reset to gently "kick" that TouchPad back into operation.
HP Notebook PCs - Use a Forced Reset to Resolve Hardware and Software Issues on Notebook with a Seal...
Removable Battery:
HP Notebook PCs - Use Hard Reset to Resolve Hardware and Software Issues
Kind Regards,
Dragon-Fur -
my iphone 4s does not start by power switch, it starts when i connect to pc. the proximity sensor is not working. please help.
Sounds like it may be a hardware issue.
Please contact Apple Support in your country.
Here is a list of numbers: http://support.apple.com/kb/HE57
Regards
J -
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
I have unabled 5 fingure gesture now not able to perform any task,also my power button is not working,please help me in removing this gesture,using I phone 4
-
I have 4s iPhone , I download the iOS 7. Now the front receiver microphone is not working , please help me that how to fix the problem.
I live in South Africa, and I had the same problem with my iPhone 4.
After weeks of frustration and swearing, I was in the process of restoring my phone to a previous iOS. To do that you need to turn the "Find my iPhone" option off, since i turned it off, my problem was solved. No need to repair anything or revert back to old iOS.
***** that i cant use Find my iPhone, but atleast i can use my phone. -
I installed windows 7 on my macbook pro. all is working but lan adaptor and sound od laptop is not working. please help me or send the link where i can download the these drivers.I have lost my resource cd .
If you are running Lion or Mountain Lion, the drivers are downloaded from within Bootcamp Assistant. If you are running Snow Leopard the drivers are on your Snow Leopard install disk.
Read the Bootcamp Install Guide for your version of OSx. http://www.apple.com/support/bootcamp/
Bootcamp questions should be asked in the Bootcamp forum where the Bootcamp gurus hang out https://discussions.apple.com/community/windows_software/boot_camp
Maybe you are looking for
-
Problem with matchcode/selection screen
Hello, When i press the matchcode of a parameter of the selection screen it has to show the values depending of the values of other parameter: Ex: Parameter A: 2 Parameter B: press matchcode (values 5,6,7) Parameter A: 3 Parameter B: press matchcode
-
Output type maintained for same partner function.
Hi Gurus, Can we maintain outupt type for different transmission medium like print output, EDI and special function with in same partner function ? Please explain also? Thanks in advance. Regards Hemat ghiya Edited by: Hemant ghiya on Oct 5, 2011 1:2
-
Solo button causing Logic to beachball
Has anyone had this problem, where if you have a track soloed (not a region with the s button) and say, want to re name the track, Typing the name whatever the track is called takes aaaaaages. It literally takes Logic around 1-2 seconds to process ea
-
Native Compilation of Apex code
Has anyone tried natively compiling all of the Apex packages, procedures and functions? For example, to natively compile WWV_FLOW (with DBA privileges): <ul> <li>ALTER SESSION SET PLSQL_CODE_TYPE='NATIVE' ;</li> <li>ALTER PACKAGE FLOWS_030100.WWW_FLO
-
Average on chart with Region Area
Hello, I have a Line chart with time periods as X Axis, Count of Incidents as Y Axis, and Resolution Code as Region. Now I want to make one more line on chart - average count of incidents, despite the Resolution code (over all codes). But when I inse