ITUNES shows a eq where whats playing usually goes??!?

Hey All,
I have an issue, well not really I just want to know how I did it.
In ITUNES - where it usually shows the name of the song and a bar showing where it is in the song etc - it shows a Equilizer that goes with the music.
Does anyone know how I did this? To Change it what would you do?

Do you see a tiny little arrow on the left of the window? Click that and it should turn back to what it was

Similar Messages

ITunes shows me an error, what to do?

Hi, thanks for reading what im going to write.
My father recently bought a iPod Nano for my little sister, and when I downloaded iTunes 7.5 and install it, I ran it and it showed me an error, can you help me please? This is the error:
C:\DOCUME~1\Narciso\CONFIG~1\Temp\db0d_appcompat.txt
Can someone help me please? My sister feels she has a empty iPod.

Hello brainiac08
Typically that error occurs because of a backup issue. Check out the article below to resolve it.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
Thanks for using Apple Support Communities.
Regards,
-Norm G.

ITunes 10 + Automator. Where's "Play action?

After I updated to iTunes 10, I lost the most iTunes actions in Automator (primarily "Play").
iTunes system gives me an error that those codes do not exist and I should update my iTunes to 4.6 or higher...
Any solutions?
Thank you

The bad news is, iTunes 10 is missing the following actions:
Add Songs to iPod
Add Songs to Playlist
Ask for Songs
Change Case of Song Names
Get Selected iTunes Items
Get the Current Song
Import Audio Files
Import Files into iTunes
New iTunes Playlist
Pause iTunes
Play iTunes Playlist
Remove Empty Playlists
Set Info of iTunes Songs
Set iTunes Equalizer
Set iTunes Volume
Set Options of iTunes Songs
Start iTunes Playing
Start iTunes Visuals
Stop iTunes Visuals
Update iPod
The good news is, iTunes' AppleScript dictionary appears to still contain the ability to script all of these items, which means that it should be easy for now to create AppleScript actions to replicate these, and that it should at least be possible for these actions to return. Will they? I certainly hope so!
Shawn

What version of iPhoto. iPhoto 11 9.4.3 (720.91) - What version of the Operating System. OSX 10.8.3 - Detail. I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are

What version of iPhoto. iPhoto 11 9.4.3 (720.91)
What version of the Operating System. OSX 10.8.3
Detail. I Attach my camera and the fields where the photos usually show up are empty and at the top of the screen it says all photos from camera are downloaded. But they are not. They can't be.
I fixed the problem somewhat myself by removing the miniSD and manually inserting it. It did not populate automatically. I had to open iPhoto and then it populated only the most recent photos I had taken which fortunately were the only ones I need. No error messages this seems to be a new occurrence.
Is there a way to just turn iPhoto off and download my photos to the folder of my own choosing?

Sure - in the iPhoto prefercences set action when a camera is ocnnected to Image Capture
LN
Note - your cute formatting really does not add anything and makes your post hard to read and follow - try straight typing with no cute formatting in the future

I purchased a tv show and have tried to play it in itunes. The screen stays black but the curser is moving. What am I doing wrong?

I purchased a tv show in itunes. When I try and play it, the screen stays black but the cursor is moving. Any thoughts?

If you are seeing the "Connect to iTunes" logo, then your device is in Recovery Mode, and you will need to restore it:
If you can't update or restore your iOS device
iOS: Back up and restore your iOS device with iCloud or iTunes
Cheers,
GB

This is an answer for anyone who had the same problem i had my itune shows stopped playing they were frozen noone new what to do all i did was click on "store"in corner of itunes screen scroll down click authorize!

for months most of my itune shows were frozen noone gave me the correct info .my new brilliant boyfriend told me to try authorizing my itunes and it freaken worked! when your in ur itunes click on store (not help not advanced ) I wasted my time scroll down to authorize this computer it will ask for ur id and password etc UNFROZEN!!!!!!! I hope this helps someone!!!!

Make an appointment at the genius bar.
If you went without an appointment, then it would make sense that you could be turned away.

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the

I opened my iPhoto library today which was stored on an external hard drive and several of my videos now will not play at all. The weird thing is that each file shows a duration of 1 second and when I open them it just shows one frame. What the !&%$#@ Where did my original video files go?

Sounds like a good plan, you can never be to safe and having a second External HD is safer than one.
The only thing that I would do different, is setup the 3T as my TimeMachine Backup and then erase and move my Photos, Videos and perhaps even iTunes Media to the 1T. That way you will have room to backup both the Internal Hard Drive and the 1T External Hard Drive to the 3T using TimeMachine.
Take your time, study and use the > Time Machine - Frequently Asked Questions if you get stuck or aren't sure how to make the move.
Also see > iPhoto: How to move the Library folder to a new location
iMovie ’08: Storing or moving your video library to an external hard disk
and > iTunes for Mac: Moving your iTunes Media folder

I am learning Italian using CD in iTunes. Is it possible to play a track at a slower speed so that I can catch what is being said?

I am learning Italian using a CD in iTunes. Is it possible to play a track at a slower speed to hear better what is being said?

Right, I understand those fundamentals. We outsource a lot of out view creation and do not have permission to create views for Business reasons; these are beyond my control. However, I can see the source code to many Views. We have also
been told that we should not use tables in our queries. Therefore, I need to use existing Views. Specifically, I would like to add an additional value to an IN() constraint. This would change the constraint as showed below:
IN('A', 'B', 'C') ---> IN('A',
'B', 'C', 'L')
I am wondering if this change can be made when the view runs and only for this one report, with the change being made from the report. This would be very easy if the constraint was removing a value. Obviously I could change the constraint from
IN('A', 'B', 'C') to IN('A','B') very easily with out modifying the View. This would be done by writing a query against the view and in the WHERE clause adding the new IN('A', 'B') statement. However, I want to do the opposite and add a value...

Sync 622 songs from Itunes to Iphone but Iphone shows 986 songs. What am I doing wrong?

I want to sync 622 songs from my Itunes on iMAC to my Iphone but everytime I sync my Iphone shows 986 songs.
Where are the extra songs coming from?
The extra songs listed under "music on my device" are grayed out with a dashed circle on the Itunes program.
Yes, I clicked on "sync only clicked on music and videos" and "sync selected music, artists"
Is there a simple fix so that when I sync my song from mac to iphone, it is a WYSIWYG process?
I have the Iphone 5 iOS 8.1.3, Mac mid 2007 OSX 10.7.5, Itunes 12.1.0.50
Thanks!

Try the following:
Attach your iPhone to iTunes on your computer and sync as usual.
When the iPhone's summary page is open in iTunes, click on the "Music" tab under "Settings" on the left side (2 rows below "Summary").
Uncheck the "Sync Music" box. Accept the "Are You Sure ...". That will remove all synced music from your iPhone once you click "Apply" in the lower right. (Of course, that music remains in iTunes).
Once that is complete, your iPhone should contain only the extra 364 songs. Do what you like with them.
Then recheck the "Sync Music" box and apply. That will restore the 622 songs to your iPhone.

Converted songs from Windows Media Player to itunes show up in the library but will not play

I just installed itunes for the purpose of converting my Windows Media Player library to itunes. I went through the install and added the music folder. itunes went through the conversion process overnight and all of my songs appear in the music library. However some songs will play properly and if you open them in windows explorer they are in a folder called my music/downloads and are mpeg files. Other songs that are listed in the music library and appear to have been converted will not play. When you click on these songs that won't play it appears to be playing in the progress bar on top, but no sound comes out and the EQ visualizer shows nothing. When you open these songs in Windows explorer they are located in a folder: my music\i tunes\itunes media\music and they are a .AAC audio file type. What went wromg in this conversion process? Why is itunes putting these files in two different locations? Why will these files not fully convert and play?

This is also what I suspected but why would the songs go through conversion, show up in the library, and then not play? Apple support even says "itunes for Windows cannot import or play WMA files that are protectd." Yet the imported song is sitting in the library and when you play it the song is listed and the diamond advances - but no sound.
Also, any tips on how to see if a WMA file is protected by DRM?
Thank you for your response.

Where are my books!? Sync-ed iTunes 10.6.3.25 on Win7 with new iPad3 WiFi/3G and iTunes shows (on my PC) that I have 590 "ebooks" (PDF's

Not to repaet myself, but... where are my ebooks?
I sync-ed iTunes 10.6.3.25 on Win7 with new iPad3 WiFi/3G and iTunes shows (on my PC) that I have 590 "ebooks" (PDF's & a few epub's) on my iPad, but for the life of me I can't seem to get to them on the iPad3 itself. If I open iTunes on the iPad3 it only shows a bland grey screen with a link to the "iTunes Stores Terms and Conditions…"? And my iBooks is empty, so is Acrobat Reader which I installed?
What gives? Gulp… help!?

That is troubling!
I downloaded the Kindle app on my iPad1 tonight, logged into my Amazon.com account and was able to download the books I had bought on my Kindle to my iPad! I am a VERY HAPPY CAMPER!

IPod Nano appears on my list of iTunes devices. Summary tab shows 928 manually managed songs; music tab however shows nothing. Where did the songs go?

I recently undated software all around, reloaded windows 8 and upgraded to windows 8.1. My iPod Nano (1.0.4) appears on my list of iTunes (11.1.3) devices. The summary tab for my iPod shows 928 manually managed songs (2 of 8 GBs still empty). However, when I click on the music tab immediately to the right of the summary tab, iTunes no longer shows my songs, playlists or audio books. Instead iTunes invites me to "sync" my iPod and kiss my contents goodbye. Why won't the songs appear in iTunes anymore? My iPod still plays the songs and they appear on the tiny iPod screen. iTunes however won't show them. iTunes still allows me to drag and drop new music and books into my iPod but iTunes won't let me see the particulars. I want to delete some audio books I've finished but iTunes won't let me to them. What gives?

Thanks iPodmaven for showing me how to check the arrow to the right of the device image and convert it into a inverted triangle. Problem solved! Thanks

My Mac is showing that I am out of disk space. It says I have 175 MB of videos. I cannot find any videos in Itunes, Imovie or IPicture. What gives?

My Mac is showing that I am out of disk space. It says I have 175 MB of videos. I cannot find any videos in Itunes, Imovie or IPicture. What gives?

For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal.

I tried renting a movie, but every time I try to play it, it gives me an iTunes error code -42110. What is the deal?

I tried renting a movie, but every time I try to play it, it gives me an iTunes error code -42110. What is the deal?
- Cratin

Something like this happened to me, where something went wrong on Apple's end and a movie I rented wouldn't play. I contacted Apple over the phone and they gave me back my money and fixed the problem for future use.

I uploaded 3 audiobooks from iTunes to my iPhone 5 with the latest ios7 on it. Each of them only plays the first 15 mins of the playback and then silence, the bar shows the book is still playing but no sound, any ideas? Thanks

I uploaded 3 audiobooks from iTunes to my iPhone 5 with the latest ios7 on it. Each of them only plays the first 15 mins of the playback and then silence, the bar shows the book is still playing but no sound, any ideas? Thanks

What happens when playing the same books in iTunes. Is there sound after 15 min?
If also silent in iTunes, check the info tab where you can see the item is an audiobook, etc. Check the volume bar, this normally is on the zero point.
When an audio book is really low in audio, I tend to move this to the plus side (+1=max), but for some strange reason this bar was at -1 in some books I had and they also seemed to play in absolute silence.

ITUNES shows a eq where whats playing usually goes??!?

Similar Messages

Maybe you are looking for