Itunes sign in help
i changed my email addres. i updated my itunes account with my new email address (username). however, on my iphone, whenever i need to update and app or purchase something, my username comes up as my old email address instead of my new one so i can never sign on...how do i fix?
On your iPhone, go to Settings > iTunes and App Stores, then tap on the Apple ID and choose "Sign out." Immediately after signing out, go back to the iTunes and App Stores section and sign in with your new Apple ID email address and password. This should iron out that discrepancy for you.
Similar Messages
-
all i get when i turn it on is a loading screen with a picture of a charger going into an ITUNES sign? HELP nothing will work not interactive at all.aince updating to I.O.S7.0.2???
What should i do currently have it on charge for several hours not done a thing and have been locking and unlocking and resettingPlease see: http://support.apple.com/kb/HT1808 for further info. It sounds like you are already in Recovery mode so if the image in Step 4 is the one you see, skip to Step 5.
Regards,
Steve -
My iphone 5 has jammed in download showing the itunes sign and a plug in cabel when going to itunes a box is show says error 3014... help please
http://support.apple.com/kb/ts3694#error3014
Error 3014
This error occurs when iTunes is unable to reach gs.apple.com in a timely fashion. Follow the steps below inUnable to contact the iOS software update server gs.apple.com. -
Cannot sign in to iTunes? Please help.
Cannot sign in to iTunes? Please help.
Welcome to the Apple Community.
Assuming this is not the first time you have used your Apple TV
You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
Also try restarting the router.
If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123. -
My phone is telling me to restore it as it will not come on and just shows a plug into itunes sign...however there is an error restoring it. HELP?!
You might try:
Placing your device into recovery (DFU) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
When updating my iphone with new software it came up on screen with the cable and itunes sign (which is what I should get when restoration has been completed) yet it is still saying restore. I have tried 3 times and the screen won't change. HELP!
If the sign does not go away it has not completed the restore. So you are incorrect when you say it "keeps completing the restore" if that message is still displayed.
Do you get an error message? If so, what is the error number? -
I've added ios6 to my new ipod but tried then to restore the factory settings. It won't extract any settings and the itunes then tells me that the server cannot be reached or is unavailable. I've been trying all day. Now the ipod has a itunes sign and a computer lead pointing towards it on the screen and this is frozen. It won't switch off or do anything else. Any ideas as this is now driving me crazy.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Frozen itouch with the itunes sign with the charger going into it. I have held down both buttons for 10 seconds I have re ran the tests but itunes doesn't read it still
Put your phone in DFU mode. Connect it to itunes and hold down the power and home buttons at the same time for ten seconds. Then while keeping the home button pressed let go of the power button. Keep holding until a message pops up saying your phone is in recovery mode. Then sync it back up. This will erase everything from ipod and restore it back from itunes.
-
my i paad2 has a charging symbol and a itunes sign above of it what do i do to fix?
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
Cheers, Tom -
I have updated to the lastest OS on my IPad3. No problem there. Then found I could no longer access my Itunes as there was a message 'Cannot be used as it requires version 10.6.3 or later. Go to ... and download'. I have tried four times and it won't work. I get another message saying I must sign in as administrator or contact my system administrator. I am the only one who uses this PC and have no idea what my administrator password is. Now I cannot use ITunes. Please help if you can. Thank you. Eileen Frost
Many thanks diesel. I cannot remember ever having an administrator password. Looks like I shall have to do a restore on my PC and not bother with the updates. Or maybe I could find my password from somewhere ? When I went into control panel I found a box with administrator and my name and it said password protected so I must have had one at some time. Any ideas on how I could find it ? Many thanks anyway. I always use a password to sign on but obviously that is not it. Eileen
-
how can I sync my Apple ID to my iTunes store sign-in window? An old ID keeps showing in the iTunes sign-in window and I cannot get rid of it to show my current Apple ID. I don't have the password for the old ID in order to "manage" my account and make changes. Help. Thanks.
Did you create a new account or did you update your existing account with a new email address ? You can tap on the id in Settings > iTunes & App Stpre and sign out of it and you can then sign with the new/updated account.
If you did create a new account then your existing content will remain tied to your old account, so only that old account will be able to redownload that content and/or download updates to its apps. If you can't remember the password for it then you can try getting it reset via this page : http://iforgot.apple.com -
Blank screen in itunes store-please help im not very technical and when i click on my itunes app the screen is blank how can i fix this please?
See if any of the following fix it.
Try logging out of your account on your phone by tapping on your id in Settings > iTunes & App Store and tap 'Sign Out' on the popup and then log back in.
If that doesn't fix it then try closing the iTunes store app via the phone's multitasking bar and see if it works properly when you open the app : double-click the home button to open the taskbar and then swipe or drag iTunes from there up and off the top of the screen to close it, and the click the home button to close the taskbar.
A third thing to try is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot. -
my phone is not getting started,its displaying itunes sign and USB sign on the phone's screen. I have also restored and updated the phone however not getting started
It helped earlier but it has come back again. I don't know what to do. I tried what you said earlier but this time even this is not working either. And quite intrestingly my phone won't turn off. I turn it off, it goes off and then restarts on its own and then keep giving the same message again and again.
Could it be a charging cable, is there any chance that the cable which was working fine one day could turn to be "incompatible" with iphone the other day????????
Please help -
All HTTPS blocked at office. Anyone know iTunes Sign-In IP address??
We have a Netgear FVX538 router and all HTTPS traffic is blocked. I can open a hole in the firewall if I know a specific IP address for the secure site I want to allow access to.... however, iTunes Sign-In happens inside iTunes so I can't tell what address it's using.
How can I find out what IP address to allow HTTPS access to?
ThanksThere is no single IP address; the iTunes Store uses Akamai's distributed server network which may use any one of a number of different servers. If your firewall allows exceptions by domain, though, try exempting these:
phobos.apple.com
phobos.apple.com.edgesuite.net
Hope this helps. -
Hi. I tried switching my Apple ID email address to my new email address and I don't know how to switch it for iCloud and iTunes. Please help!! It seems like Apple thinks I have two separate accounts, when I just tried to simply change it!
Settings > Store > Sign Out.
Sign in with the correct ID.
Maybe you are looking for
-
Some fonts won't import into font book
I am importing fonts, ttf files, into Font Book from the Vault of the discontinued font manager Fontcase. A few have brought up error messages, and I do not import them. But many more, maybe 20%, simply do not get imported; no error message appears.S
-
User exit for saving a sales order
hi wats the user exit when saving a sales order?
-
Can't see Airport Extreme after Snow Leopard Update
I'm running 10.6.2 with every update, and while I have no trouble connecting to my wifi network on the Airport Extreme (about 2 years old), I can't see it in the Airport Utility program (5.4.2) in order to administrate the hardware. I can see the Exp
-
Migrating MySQL5 database to Oracle 10g - refrential integrity constraints
On migrating MySQL5 database to oracle, referential integrity constraints are not migrated to Oracle. Capture stage shows it has captured the constraints but constraints are missing from the Oracle Model. Is this a bug? If not, what I need to do to g
-
Unity connection 8.5 broadcast message
I have a unity connection server setup with users on 2 different partitions and search spaces. If I setup a user to be able to send broadcast messages out and they belong to one partition/search space will that broadcast message go out to everyone o