Itunes start up page

I hope someone can help me. When I open iTunes now the page looks nothing like it used to. Before a the top there were the controls fro play/pause/next song --- a screen that showed the name of track and time remaining and all that. As well there were the 3 dots to close, minimize & maximize.
Now when I open itunes all that is gone. Now the controls are in a pull down menu, and I have to double click the itunes store to get the search function.
It's very frustrating as it's not like this on any of my other computers (just on the MacBook Pro).
Is there any way to restore the default look?
Thanks for any help.
Kris

Anyone?
Should I try to contact Apple about this.
Thanks.
Kris

Similar Messages

  • How do i get my start up page in english when i plug my iphone 4 into itunes ?

    how do i change my start up page to english when i plug into itunes .?

    I'm in Indonesia, but I want my mozilla in english version, how can I change it?

  • Whenever I type an "s", "f" jumps behind it and iTunes starts up. This bizarre event is in MAIL and Pages. How do I fix this?

    Whenever I type  the letter 'a' the letter 'f'shows up behind it and iTunes starts up. This happens everywhere.  It is so bizarre, I have no idea how to remedy it. I have tried restarting mail, then restarting my iMac but nothing has worked. I know it's a software glitch but I have no idea where to go. Any help will be appreciated

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • ITunes started freezing up on Windows 7 home while down loading podcasts and university videos.  Now, I can't even get iTunes to open on my computer.  what do I need to do?

    itunes started freezing up on Windows 7 while downloading podcasts, books, itunes university items.  Now, I can't even get itunes to open on my computer.  What should I do?

    It seems that in some cases the scripts on Apple's site that are intended to query your system to offer the appropriate installer don't work as intended, taking you straight to the "Thank you for downloading" page.  Depending on the edition of Windows you are running, there are three variants of the most recent version of iTunes, with direct links to the installers as follows:
    iTunes 12.1.2.27 (32-bit) - iTunesSetup.exe
    iTunes 12.1.2.27  (64-bit) - iTunes6464Setup.exe
    iTunes 12.1.2.27 (64-bit "for older video cards") - itunes64setup.exe
    The third of these - which is actually the 32-bit application with a 64-bit installer - should be used if you get a warning about video card incompatibility when you install the standard 64-bit version, but also may resolve issues with playback, QuickTime compatibility, and problems with some third-party applications (including Outlook).
    See turingtest2's notes on Troubleshooting issues with iTunes for Windows updates for more details if you're still having problems with installation.

  • How can I get back into my application aftermath invoking Start up page of index.htm ?

    Gorgeous Hello All,
    If anyone of you can please provide me a solution for the following, will help me in plentious and galore.
    Am using Adobe RoboHelp, Version 10 and IE version being 10.
    A hurdle :-
    I have a application which has been developed in ASP .NET, Version 4.0. Help link has been created in this application wherein here the Start up page of index.htm has been linked to be read from the RoboHelp local project folder\!SSL!\Multiscreen_HTML5\desktop. All are working absolutely fine except when
    I login into the above-said application -> click on the Help page -> the index.htm opens with Contents, Index, Glossary -> Am able to successfully perform any task by respective clickings
    -> But I am not able to get back into my application when I click on the IE provided Back button (Alt+Left) -> Any amount of invoking Back button makes the system getting looped into this Start up page of index.htm only -> When I Close Tab (Ctrl + W) or Close ( X ) -> The window session gets closed and I have to repeat all by relogin once again.
    How can I get back into my application aftermath invoking Start up page of index.htm ?
    (I can always get back into the application easily by erasing those parts in the url which refers to this RoboHelp linkages – but this certainly looks non-polished work)
    Help Please
    Cheese – Vipin Nambiar, Bangalore

    Hey Jeff, I used Internet Explorer 10.0.9200 and Google Chrome 26.0.1410. Alas - it is the same behavior.
    (But Jeff : When I used Microsoft HTML Help as primary layout to generate chm file , My Help when launched from my Application opened in a new browser window and when I closed this Help browser window did not close my application. Looks like need to write few liner code to get this issue settled )
    Thanks Indeed of lots for your concerns Jeff !!!

  • Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7)

    Ok. So my iTunes started acting up a few months ago. ALL of the songs I purchased from the iTunes store stop in the middle of the song and then go back to the begining (I keep it on repeat one song by the way). Please help!!! (Windows 7) I would really like to hear my songs all the way through, but I can't . I tried the "Convert Protected ACC files to Purchased ACC files fix" but it DIDN'T work. I don't know what to do. It does it when I transfer the music onto my Classic too.

    What do you mean "doesn't recognize"?

  • ITunes starts fast forwarding tracks after 1hours continuous play?

    Hi I have recently updated windows XP on my computer to service pack three. After this update when I am listening to iTunes it suddenly started playing the songs in my library too quickly as if it was stuck on fast forward.
    If you stop itunes playing then press play or select a different track it continues to play too fast. The only way to fix the problem is to close itunes and re-open it.
    I have now found that this problem starts after iTunes has been playing music for just over an hour, so currently I'm having to close and re-open itunes ever hour to keep listening to music.
    Any Idea why this might be happening?
    I'm running XP SP3, 3GB ram, 3GHz processor, 200GB HD no where near full. Its iTunes version 8.2.1.6.
    Thanks
    Liam
    Message was edited by: Liamom_uk

    Anyone else have this problem? I have now timed the problem to exactly 1hour 9minutes of continuous play, so if you play for 30 mins, pause for 15 then play iTunes starts fastforwarding 39 minutes later.

  • My name and/or password are not working on start up page. Got given used macbook pro and new to apple so please help!

    My brother gave me his macbook pro and I'm having trouble getting past the start up page that asks for my my name and password. I have an apple id and password but these don't work nor does me typing my actual name and the same password. I've rung apple twice and the first person said I had to reset my uusername account and told me I could do so by visiting the support part of the apple website using the link he gave me. The information tells me how to do this but I have to have the computer up and running to reset/change the account username and password. So no joy. Second time I spoke with a lady who told me the name and password should be the same as the one my brother used when he had the computer but having entered the name and password he gave me it still doesn't work. I've tried all the different name types of my name e.g. full name, no spaces, capitals and no capitals etc but every time I click on the right pointing arrow thing or press the enter button the password does a quiver/shake thing and nothing happens. My bro says he has a relatively new lion operating system. I haven't a clue what to do as I'm new to using apple computers and I've spent ages looking through the support section with no success in finding the solution. Any help/advise would be much appreciated. Ta

    Resetting User Password in Lion and Mountain Lion
    Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
    When the Recovery screen appears, go to the Utilities menu and open Terminal.
    In Terminal, type:
    resetpassword
    ...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
    Good luck,
    Clinton

  • Somehow my itunes started a new library and I lost my old library. Itunes will not allow me to sync new music to my ipod without deleting stored music from ipod. How can I start using this new library and sync the new music without losing existing music.

    Somehow my Itunes started a new music library and I lost the old library.  Itunes will not allow me to sync new music from my computer to my Ipod because it is now in a different library. Itunes wants to delete all my Ipod music before sync any new music. How do I work around this. I think this happened during Itunes Upates.

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
    tt2

  • Can I set up two different start up pages

    I want 2 different start up pages that you have to log into on my I pad 1 for me and 1 for my son

    Ok thanks can I set up a folder then and put my apps in it and password protect that folder.

  • I have chosen a persona, but when I start up Firefox, Mozilla start page with Google shows, and persona is just barely visible only in the toolbar area. How do I get the persona to show, and not Google start-up page?

    I checked out the Mozilla Personas, saw one I liked, and added on. When I start Firefox, the Mozilla start-up page shows as usual with Google on it. The Persona I chose barely shows, and only in the Toolbars area at the top of the screen. Can I modify the start-up page to not show Google, and access Google another way, so that my Persona will show on the whole start-up page?
    == This happened ==
    Every time Firefox opened
    == I added-on Persona

    As you can see from the [http://support.mozilla.com/en-US/kb/Using+themes+with+Firefox using themes with Firefox] article, personas are "''lightweight themes that can change the color scheme and background image of the Firefox toolbars''" and they wouldn't change the webpages.
    If you don't like seeing Google as your home page you might want to look at [http://support.mozilla.com/en-US/kb/How+to+set+the+home+page how to set the home page] and change it.
    Finally Firefox 3.5.x will be maintained with security and stability updates until August 2010, so you might want to [http://support.mozilla.com/en-US/kb/Updating+Firefox update to a newer version].

  • HT1459 After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time.What now?

    After updating ITunes, it, ITunes started loosing my music files and stopped playing more than one song at a time also there would be duplicate songs in the same folders.What now?

    Sound like something messed up somehow. Maybe you can consider reinstalling the drivers again? @28.86.2.0

  • My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically. Any thoughts?

    My iTunes v.10.6.3.25 is intermittently refusing to open. Sometimes re-booting my laptop works, sometimes not. I just put the computer to sleep, and when I woke it up, iTunes started automatically (I had been trying to open it just before by clicking on a song file in my Documents window, and that's the song that started playing when the pc woke up). I went to my iTunes Help and clicked Updates/download iTunes 10.7 twice, but got nothing. Now, Im wondering if I should downloacd the entire 10.7, or whether that would overwrite all my files, erasing my songs. Anybody know? Thanks.

    Hey thanks for replying.
    Here's what I did:
    First I tried the Winsock reset in the Command prompt. Nothing changed.
    Next, I tried the instructions on http://http://support.apple.com/kb/TS4123. The only other program that came up on the 'Winsock Providers' tab on the program was 2 Windows Live applications, which I can do without. So I deleted all Windows Live Applications.
    I did the Winsock reset in the Command Prompt again and rebooted my comp.
    Unfortunately, nothing has changed. iTunes keeps freezing at various stages of the sync, then shows the candy cane-striped bar with either the words 'Finishing sync' or 'Cancelling sync', before showing the Apple logo.
    Sometimes, iTunes gets to the syncing stage - "Copying # of ####" - where it will trudge through the first, second and third tracks before flashing "Copying 4 of ####" for a split second and I catch "Cancelling sync" briefly before the Apple logo appears.
    Again, I've repeated the steps I mentioned in my previous post. Does ANYONE know when the new version of iTunes is set to be released?! This one is driving me INSANE, to say the least!!

  • TS1567 My Ipod Classic appears in my computer when connected to my Windows 8 pc but when itunes starts it no longer appears and is not shown in Itunes also. Itunes appears to disconnect it from pc.

    My Ipod Classic appears in My Computer when I connected it to my new Windows 8 pc. When Itunes starts my Ipod is no longer appears in My Computer and is not shown under Devices in Itunes. It appears that Itunes disconnects my Ipod from the pc. My Ipod still sync's up fine with Itunes on my old Windows XP pc.

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • Is there any way to prohibit certain movie categories or ratings from showing up I'm my iTunes movie home page

    Hi, I'd like to know if there's a way to customize what shows up on my iTunes movie main page. When I go into iTunes, there are often categories that I have no interest in which show up on the initial page of Movies when I go into iTunes on my iPad (and I'm assuming this would be the same on my PC version).
    Can I customize the categories to only show ones I'm interested in or prohibit certain categories? My kids use the iPad as well, so I don't want horror movie images etc slammed across the movie wall.
    Also, I don't rent rated R movies, so it would be easier to just have those not show up at all. It doesn't appear there are any handy settings that allow me to customize what I see, but thought I'd ask in case I'm wrong.

    You can't control which genres show, but you can control which films show by their age ratings. On your iPad you can use Settings > General > Restrictions > Movies (under the 'Allowed Content' heading). On your computer's iTunes you can use Edit > Preferences and use the Parental tab to set which films (and there is a similar setting for TV programmes) can be accessed (screenshot is from a Mac, but it should be similar on a PC) :

Maybe you are looking for

  • How to open url with two varible

    Hi everyone Could you tell what wrong is in this line.           String x="http://localhost/Test.php?memberID=ww&movieID=mm";      Runtime.getRuntime().exec("cmd /c start iexplore "+x); why does my Test.php always only get the first parameter? Test.p

  • Program exit - IF_SWF_IFS_WORKITEM_EXIT - Executed by WF-batch.

    Hi all, I have implemented a Program exit in my User decision step. This user exit is for finding the actual agent rule. But whats happening now is that the events are getting triggered in the below fashion. 1. swfco_event_before_creation(BEF_CREAT)

  • Case #0212856489

    I was getting help for this issue; however, the issue was not fully resolved.  Having trouble with Fireworks now and Dreamweaver is still not the same.  I was told to delete a item, think this may be the issue.  The issue was never fully resolved, Dr

  • LDAP lookup in Calendar?

    Does Calendar have the capability to search LDAP when I'm trying to add someone in the invite?

  • CVS commit comment no longer populated from task after upgrade to Mars

    Hi, after I upgraded to Eclipse Mars, I no longer get the CVS commit comment populated from the active Mylyn Bugzilla task. I have installed: Eclipse Mars CDT edition Mylyn Context Connector: C/C++ Development Mylyn Context Connector: Eclipse IDE Myl