ITunes still not working after uninstall and install. Help?

iTunes hasn't opened on my computer for a few weeks. Before uninstalling, I went to Control Panel and chose the 'Repair' option which did nothing. I ran a scan to see if there a virus, came up clean. I uninstalled it completely and reinstalled the latest version and it still will not open. Any ideas? I want to put new music on my iPhone and can't because iTunes refuses to work.

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

Similar Messages

Itunes will not open after uninstall and re-download, I only get a message itunes match accessing itunes store which goes on for a long time

I could not open I-tunes. I had used it a week before but it was spotty and then eventually it would not open at all. I uninstalled it then downloaded it. I restarted the computer. When I tried to open itunes, I got a message "ITunes match. Accessing iTunes store" and it does not go beyond that. I've tried this process twice. I had my Norton support service do a tuneup and they downloaded iTunes but it will still not work. help!

Hello SharlaCerr,
The article linked below provides some helpful troubleshooting steps that can help get iTunes running on your computer.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

Iphone 4s camera still not working after replacing and restore?

I bought phone with back camera not working so first i done a restore and update to no avail, then done a restore as new phone still no joy, so i decided to buy new camera which i fitted no problems but its still not working? what else can i do as there is no warranty on the phone?

Find a third-party repair shop with experience in fixing iPhone cameras. Apple won't help you.
Be aware, since Apple does not sell iPhone parts, there is no legitimate source for such, & many on the market are counterfeit.

3rd party plugins not working after archive and install

hi,
i have a few 3rd party plugins in my logic pro, such as all the native instruments, waves diamond, ik multimedia plugins, atmosphere and a few more,
i was getting an error on my g5 when i tried to run diskwarrior from the disk. it was the kernal panic message, it said i had to restart my mac, therefore i couldnt run diskwarrior from disk.
i did a bit of research and a few people suggested doing a archive install, so i did.
well what do you know, i had to re-install logic 8 again. other programmes such as transcribe, itunes idvd imovie etc were ok.
but logic didnt load up, o i had to re-install logic again,
also before i did that i checked to see if my 3rd party plugin were working in standalone, so i check all the native instruments and they seemed to work ok, T-racks deluxe works fine, so i thought they should all load up in logic.
once logic was installed again and had to get all the updates all my 3rd party plugins did not show up on my AU validation.
is there a way to get logic to see my 3rd party plugins or do i have to re-install all of them again.
cheers for the help
lib

Then check if the NI AU components are actually where they should be:
HD/Library/Audio/Plug-Ins/Components
If not copy them over from your "previous systems" folder which was created on your HD during the archive and install process.

CC does not work after Uninstall and reinstall

Adobe 24/7 help online does not solve the problem. They come up and said to uninstall all, and as the result, I can not access ALL my software. Please help. Error message screen shot attached below.
This is on Home PC, OS: Windows7, 64bit, Core i5, 3.1GHz, 8GB RAM, was working properly more than a year or two. Now, I can not see ALL apps and the only see the "spinning wheel" for 10 minutes and shut down.

The Online chat support team ask me to do these stepts:
1) End all the Adobe related processes from the Task manager like Adobe CEP Helper,AAMupdater, AAMupdater notifier, Adobe Crash demon process, Coresync ,Creative Cloud.
2) Deleting the folders in various locations
3) Install the Creative Cloud Cleaner (.exe file) and run, clean ALL CC things
4) they give me a link to download and reinstall the CC
5) at the end, all the same problem. giving the same message as before "Microsoft Visual C++ Runtime Library - Runtime Error! Program: C:\Program Fi... "This application has requested the runtime to terminate it in an unusual way. Please contact the application's support team...."
Also, the support guy ask me to uninstall ALL CC Apps and I did it. NOW I have nothing left on my computer and I can not work. HELP

TS1398 my wifi still not working after restore and make new iphone my wifi still greyed what shall i do now?

apple need to do something or answer my question,what i need to do over my wifi doesnt work im so disapointed now because i tried all posible solution for it but still my wifi cant be on still in greyed.pls do something...

Hello there, Amer.
The following Knowledge Base article offers up some great basic steps and additional more in-depth steps for troubleshooting the issue you're describing:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.

After my iphone4S update to 7.0.6, it have a problem that keep searching network then no service show on display. Can't call. I have try check sim card, reset network settings, and restore my iphone. Still not working at all. Need help please.Urgent.TQ

Izit software or hardware? Confuse:(
Only can use wifi now.
Any way thanks guys for ur suggestion:) amishcake and simes

HT5648 After uninstalling and installing several times, Java plug-in is still undetected. Support suggested I open up the control panel and click update but there isn't such an option. The advance tab, there aren't any options to enable or disable plug-in

After uninstalling and installing several times, Java plug-in is still undetected. Support suggested I open up the control panel and click update but there isn't such an option. The advance tab, there aren't any options to enable or disable plug-ins.

If you're running Java 7, then in System Preferences > Java > Java Control Panel in the Security tab there is a check box to enable Java in your browser. To check for update go to the Update tab.

HP Photosmart C6300 printer/scanner not working after Snow Leopard install

HP Photosmart C6300 printer/scanner not working after Snow Leopard install
Reinstalling etc does not work - does anyone else have the same problem or a clue as to how to fix this?

Keith,
I got a C6280 and the scanner does not work anymore. I am for 6 days in contact with HP. The last printer driver install form the apple web site does not open the image of HewlettPackardPrinterDrivers.dmg because of an invalid checksum. The skipping of the validation gives and error in the install.

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

B110a black in still not working after trying all recommended solutions

Hi there
Black ink still not working after spending many hours trying to sort. I've cleaned the printhead carefull several times (is immaculate now) and run the system clean up and alignment functions several many times too. I've cleaned the metal connecting points. I wiggled things carefully. I've attempted printing multiple pages in b/w in case it was going to take a while to get the ink flowing again. I've replaced one (expensive) new black cartridge with another brand new (expensive) cartridge and still nothing. This machine is probably out of warranty but seriously not very old. It really ought to be working okay. We use it regularly a little bit every week. Any ideas?

The document here has troubleshooting steps that may help resolve black not printing on your Photosmart b110a. Be sure to check the vents as shown in solution six, step three. If the above does not resolve the problem the post here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Tried to reinstall PS CS6 from download, will not load after download and install, need assistance

I tried to reinstall PS CS6 from download, will not load after download and install, need assistance.
Thank you.

Thanks for the suggestion - but I eventually tried again and was able to contact via "chat" to someone qualified to help. The problem was that in my existing "bridge" - preference was (I think by default) - checked to startup in background on Login. I did not realize this - because I don't think I set it that way in the first place (maybe I did a few years ago) - and I could not see anything in task manager to suggest that bridge was running an application or any process - but when I learned this - I was successful in installing PS CS6.
Yes, I'm still not on solid ground re: whether or not I want to change from "owning" the tool or renting it -- what concerns me is that is sounds like regardless of users wishes, Adobe is headed in this direction and will eventually make it financially more feasible to go that route. At the moment I think they are "asking" for everyone to get on their bandwagon, but who knows. They have a powerful set of tools, that they continue to support and advance - and along with those development and support costs, they also would like to make a profit - so I understand if their past marketing model is no longer sufficient.
Thanks again.
John

HT3917 My apple wireless keyboard is not working after new batteries installed

My apple wireless keyboard is not working after new batteries installed.

Do you get a steady green light to say there is a connection. If not, are the batteries the right way round. Do you have a monitor to tell the batteries strength. Is there a reading. Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

[svn] 3752: Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.

Revision: 3752
Author: [email protected]
Date: 2008-10-20 12:41:06 -0700 (Mon, 20 Oct 2008)
Log Message:
Bug: BLZ-195 - JMSAdapter not working after disconnect and resubscribe.
QA: Yes
Doc: No
Checkintests: Pass
Details: Merged change 3676 from trunk.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-195
Modified Paths:
blazeds/branches/3.0.x/modules/core/src/java/flex/messaging/services/messaging/adapters/J MSAdapter.java

Welcome guy -
Unless you are using Spry menus as a learning experience, you should move forward to a menus system that will display properly on the millions of portable devices that won't work with Spry which was deprecated 2 years ago.
Many are using JQuery menus or pure HTML/CSS menus.
If you wish to continue your Spry for learning experience, we'll be glad to assist; please let us know.
By the way, your submenus are not showing because you need to add the red value to this rule in your vertical CSS
ul.MenuBarVertical ul.MenuBarSubmenuVisible{
width: 220px;
left: 180px;

Finder not responding after Archive and install

I recently encountered my first problem ever with my mac(new in '05) This is the first mac I have owned; I have worked on G3's and G4's in the past. After reading through many message boards and support pages I don't believe my problem to be similar but different to previous posts.
My problem started off with an OS problem that I was able to diagnose in the "help" book I purchased when Leopard came out. It said I should Archive and Install to remedy the problem and keep my files. I ran the archive the install (it gave me no options to preserve user or network settings). After Archive and install my computer started up alright, but I got the permanent beachball and the finder does not work. it is constantly non responsive. I can relaunch finder, but after it restarts it goes non responsive immediately once again. So I can't actually access my "previous system" folder to move anything over. I checked my dock items and finder, they opened, but my itunes asked for an update. I list of update items came up; I did the non-restart items first. they updated fine, (my itunes old itunes playlists are viewable but not playable now) then I did the items that required a restart. That is when I found out that I could not shut down or restart my computer with std. procedures.
Currently I can only access my spotlight or apple pull down menu if I am in a functioning dock program (safari or itunes, quicktime. etc.) after reading some more support pages it looked like the common thing to do was check permissions and verify disk. I did, I repaired two permissions and the disk was OK. I did look at the HD files, they were as I remembered, but unaccessible (greyed out) and the "previous system" folder was present. +It didn't look like I would expect. The HD looked same as it used to just with a previous system folder.+ After checking the permissions and verified the disk I tried a hard restart. It came back the same as before, unresponsive finder and only the few dock items worked along with spotlight. I checked permissions and disk verify again and everything was OK.
Sorry to be long winded I am trying to be thorough...In short, My finder does not work after doing an Archive and Install to fix my original problem (which has been fixed)...the remedy for an unresponsive finder is to do an archive and install. Is another archive and install really going to fix my problem? Can I archive and install OSX 10.4 and work my way back up to 10.5.6?
Secondly is there a way to restart my computer without doing another hard restart?

It won't let me add a new account. I am locked out and when I try to unlock it gives me the beachball and becomes non responsive after it tries to authenticate.
I looked at the log file, I am not sure what exactly to look for. I am no programer. I see an awful lot of negative wording. I see some errors like "error (-4956) locating menu extra but they are mostly under system preferences...I see some stuff in the loginwindow that says is not a full path... Otherwise, the only reference I see to the finder is when I have force quit the finder.
2/8/09 8:59:55 PM com.apple.launchd[114] ([0x0-0x4d04d].com.apple.finder[304]) Exited: Terminated
2/8/09 11:10:17 PM com.apple.launchd[114] ([0x0-0x57057].com.apple.finder[321]) Exited: Terminated

ITunes still not working after uninstall and install. Help?

Similar Messages

Maybe you are looking for