ITunes stopped working after last update
I got an update for iTunes yesterday. Now when I try to open it I get an error message "iTunes has stopped working" and the program closes. Any clues?
Hi Pam,
Take a look at the article below, it will help you isolate the issue and then provide some suggestions that should resolve it.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
If that doesn't help, just reply with details about what you're seeing.
-Jason
Similar Messages
-
My Logitech K750 numeric keypad stopped working after last update-numbers only
After the last Mountain Lion update, the number on my numeric keypad will not function. They work for my login, but then become inactive. I have tested the system with an Apple keypad, same thing! What happened? Is there a keyboard setting that needs to be reset?
Dianefromblaine,
Thank you. My K750 number pad stopped working on my iMac. The keyboard and number pad 'do' work on a different Mac, so I suspect it is some setting on the iMac. I did a Safe Mode start, reset the SMC, and repaired the disk permissions. The dongle was plugged into an USB Hub. It is now plugged into the iMac USB port. The keyboard has a 90% charge, but still does not work. Then suddenly it started working again, but stopped after about one month.
I found your "Accessibility>Mouse and Trackpad" suggestion and deselected "Enable Mouse Keys". My number pad works again.
Thanks. -
Screen sharing stopped working after last update
Hello all,
I have run software update yesterday, and there were about 10 downloads (I run this weekely, so these must have been new ones). The thing is that after installing all the updates, one of the features that I use more frequently, screen sharing, stopped working properly. I have a Mac Book Pro and an I Mac, both running on Snow Leopard, and screen sharing has always worked just fine, but not after the latest update.
I checked passwords and they are all right, and also checked sharing properties and all seems to be fine. I can share files all right, but for screen sharing now is only possible by setting the option "anyone may request permission to control screen" (under sharing>screen sharing>computer settings) to on, and ask for authorization each time I need to share screens, not good, mainly if you have the computers in different rooms.
Finally, I own an Me account, so I tried sharing screen via Back to my Mac, but it didn't work either.
Can anyone help?
Thanks a lot,
LuisProblem solved!
After working with Apple, I have an answer. It looks like the 10.10.2 update changed your firewall settings. Try this:
System Preferences>Security and Privacy>Firewall Options
Scroll down the list till you find "screensharingd". If it's marked as block in coming connections, change it to allow incoming connections.
Be sure to reboot your computer and you should be good to go! -
Command line option "-save-to-folder" stopped working after last update: Any workaround?
Running FF on Linux, I was using the -save-to-folder option at CLI to write a copy of the webpage to file with JS content rendered. Worked great until the recent update (to v.27.0.1).
Typical format was: firefox url -save-to-folder filename
When things break, the fixes sometimes happen quickly, sometimes not. In the meantime, anyone have a workaround?[http://ubuntuforums.org/showthread.php?t=2210953&p=12955762#post12955762]?
It will depend if your Linux build was compiled by a third party. Typically if a function like that stops working, uninstalling might be a good option, but maybe not in this case.
The full list are [https://developer.mozilla.org/en-US/docs/Mozilla/Command_Line_Options] is this one custom perhaps?
There is an add on [https://addons.mozilla.org/en-US/firefox/addon/save-file-to/ Save file to] that adds a dialogue, but you may want to stick to linux. There is a customize shortcuts [https://addons.mozilla.org/en-US/firefox/addon/customizable-shortcuts/ add on]
-recording-output may be something you can try. Or make a bug! :-)[bugzilla.mozilla.com] -
HP Support Assistant stops working after last update
message says
hpsf.exe has stopped working
HP ENVY 17-2070nr Notebook PC windows 7 64 bit
This question was solved.
View Solution.Hi,
Try the following
First of all, uninstall your current version of HP Support Assistant by using the Microsoft 'Fixit' on the following link - this is particularly useful in correcting issues that may prevent reinstallation on machines running a 64bit OS.
http://support.microsoft.com/mats/Program_Install_and_Uninstall
When this has completed, restart the notebook.
Next download and install the latest version of HP Support Assistant from the page on the link below - the download links are towards the bottom of the page.
http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
After the installation, restart the notebook again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Middle-mouse paste function stopped working after last update
I think FireFox was updated last night. Ever since then my middle mouse paste function doesn't work any more.
I haven't installed any addons or changed settings either.
I'm talking about: about:config > middlemouse.paste = true
I've tried toggling it etc. but nothing I can do changes it. Any ideas?The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us! -
TC guest network stopped working after last update
Hi, I got the new 2TB TC. And it was working fine. Since I updates it to 7.7.3. The guest network stopped assigning IPs. I can see it and change the settings but I can't join it anymore. It was working fine before.
I Am setting it from iOS devices not a Mac.
The TC is in bridging mode.
I Also tried restoring it to default settings.
Any ideas how to fix this?
Thank you.I had it working right out of the box when I bought it, there was no double NAT warning or error message, unlike now I have to ignore the double. NAT error message for the light on the TC to turn back to green again.
-
Ducking stopped working after last update
I had a project I created last summer where I used the ducking feature throughout. It was working great. The sound clip was at full volume, ducking was selected, and as desired and selected all other clips were reduced to 15% volume.
Today I opened the project and played through. The portions where ducking was selected are now functioning the OPPOSITE as intended. The sound clip itself is ducked and all the other clips are full volume.
When in iMovie and click the gear for the clip, it says next to the "ducking" checkbox, "reduce volume of OTHER tracks to 15%". It's in fact reducing the volume of itself to 15% and having NO effect on the other tracks.
Is there a solution to this?
Please, I already know of several workarounds... what I want to know is what caused this and if there's a real solution.
Thank-you.sparky67 wrote:
When in iMovie and click the gear for the clip, it says next to the "ducking" checkbox, "reduce volume of OTHER tracks to 15%". It's in fact reducing the volume of itself to 15% and having NO effect on the other tracks.
Hello sparky,
I have encountered the same problem (although I cannot say if it is due to a recent update).
And unfortunately, I do not have any idea what might have caused this or how to resolve it.
What makes this so weird is that I have other iMovie projects on the same machine using the same type of source files (DV video clips and separately recorded voice-overs in WAV format) where ducking works flawlessly - with the same settings.
I would really be grateful for a hint on what's happening here and how one might resolve this problem - it's a total show-stopper, as I cannot complete the project without pre-mixing all audio outside of iMovie, which would take ages. -
Camera connection kit stopped working after last update
After the recent update to ios 8.1.3 my Apple Camera connection kit has ceased to work, any one got any ideas why and a possible solution?
Is this a genuine Apple-made CCK or a third party one?
Some third party CCKs are not compatible with iOS 8. -
[Solved] ALSA stopped working after last update.
I'm using pekwm and a 32bit install at the moment. Volwheel will not allow me to adjust the volume. I can't run alsamixer even though it's installed. My username is a member of the audio group... And when I run alsaconf it will not recognize my sound card (HDA Intel).
[neruson@megatron ~]$ alsamixer
cannot open mixer: No such file or directory
[neruson@megatron ~]$ ls /usr/bin | grep alsa
alsa_in
alsaloop
alsamixer
alsa_out
alsaucm
When I ran alsaconf I got this message:
No supported PnP or PCI card found.
Any help would be appreciated
Last edited by Mr_ED-horsey (2011-09-01 00:53:12)Fixed. I reinstalled "linux" and "linux-headers" and rebooted. Everything's working now
-
My itunes stops working after I try to sync it, I recently just updated my itunes to 10.4 and my ipod touch 4g to 4.3.4
iPhone 4, same thing. It gets stuck at Step 1: backing up
-
Firefox extension: "TrueSuite 5.2.500.16" stopped working after last firefox update (30.0), even though about:plugin says it's enabled.
i tried resetting firefox and look for similar problems, unfortunately didn't find anything.
also there's weird blank space before address in address bar
other extensions and addons seem to be running fine.jscher2000, i tried that, i thought it didnt work before, it's just that this time i accidentally closed (and thus restarted) firefox and it worked, thanks man
-
My wifi stopped working after a update last year and I have updated since, can this be fixe
MMy wi fi stopped working after a update early last year and I have just made do since then by using i pad at home. I was going to upgrade my phone but need to clarify if it was the upgrade that broke my wifi and can it be fixed? I have heaed of Apple replacing phones affected by this problem. Please help
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If those solutions don't work your iPhone 4s has developed a hardware problem. The permanent solution is to get it replaced. I have not heard of Apple replacing long out of warranty iPhones.
You can search the internet for heating and freezing solutions that might work (at least for a while).
For example, see here: https://www.youtube.com/watch?v=nj10bz5bI6A -
I have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?
i have a brand new iphone 5 it just stopped working after i updated to the 7.6 help?
Connect it to iTunes on your computer and Restore it. See: http://support.apple.com/kb/HT1808
-
itunes stops working after say half hour of use and will not play next song, I have to close and reopen, it works fine till next time, it keeps happening on a regular basis, HP pavilion laptop, g6 series,
Window 7 64 bitHello davewood26,
The following article provides steps that can help get iTunes stabilized.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen
Maybe you are looking for
-
After installing reader 9, Internet Explorer gives the message: "Internet Explorer has encountered a problem and needs to close. We are sorry for the inconvenience." everytime I close an internet window. If I remove reader 9, the problem no longer oc
-
Hi all, Can any one tell me how to create check box in se80 transcation and after clicking it, it has to goto me51 transaction.How to declare checkbox in the program in se80. Regards, Priya
-
AR9.1 Rich Media Annotation TextInput and Backspace Key
I've put together a test PDF see: http://www.amrita-cfd.org/4adobe/rich-media/shock-tube.pdf that shows that the backspace key does not work as expected for an a TextInput field in a rich-media annotation when viewed with Linux AR9.1; at least not wi
-
Problem in enter-query and execute-query in TEMPLATE.fmb in Oracle Apps R11
I have created the form using TEMPLATE.fmb in Oracle Apps R11i. There is 2 problems listed below when it queries the records:- 1) Cannot query the record by the specific value e.g. Cannot retrieve the PO records by entering the specific PO number. 2)
-
PLSQL code in a javascript code
Can i write the PLSQL code in a javascript code? Actually i want to pass a value into a PLSQL code. First in javascript code i have to read a value of page item :PX_ITEM, then i have to pass that value in PLSQL code.