Itunes stopped working error on launch win7 64bits

Hello
Everytime i try to open the app i get this error! ITUNES STOPPED WORKING and itunes crash.

Hi dondatoz,
If you are having an issue with iTunes unexpectedly quitting on your Windows machine, you may find the following article helpful:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

Similar Messages

Lock computer causes itunes stopped working error

I can repeatedly crash itunes by locking my computer either with a screen saver requiring a password or via ctrl-alt-del "lock my computer". I have tried disabling other applications via MSconfig as suggested on some forums (no changes), verified that Qtime does work properly, and even tried solutions for other symptoms that are reported to cause the same error (e.g. deactivate store/reactivate, etc). I do not have any of the codecs that cause problems with itunes.
The error message is always "itunes stopped working...checking for a solution".
I am running Vista Home Premium SP1 (32bit) on a Dell E1405. Any ideas?

You're right - I just validated that -- the problem only occurs when itunes is the top application. Too bad about no response as I use a password protected screen saver on my laptop (for security) and I have the tendency to have itunes on top. I guess I'll have to break this habit until when/if someone solves the bug or creates a workaround.
I'm trying to figure out the mechanism of the failure. Event Viewer tells me its a D3D9.DLL that is failing:
+Faulting application iTunes.exe, version 8.0.2.20, time stamp 0x4925c4fe, faulting module D3D9.DLL, version 6.0.6001.18000, time stamp 0x4791a65d, exception code 0xc0000005, fault offset 0x0000ae35, process id 0x119c, application start time 0x01c998fab49455b8.+

Licensing has stopped working error durinng launch of Photoshop CS3

I cannot get rid of this error message during launch of PS CS3. I tried uninstalling running the CS3MacClean Script, reinstalling, ... same problem. The same installer and serial number works fine on a clean system so I know there must be a file or two that the cleanup script doesn't remove.
Anybody know what files to delete?

After installation, a system upgrade, machine migration, backup restore, or some other system event(s), trying to launch Adobe applications on Mac OS X results in the error "Licensing for this product has stopped working." You may see error numbers after this message, such as "150:30".
Solutions
Do one or more of the following solutions. Note, Adobe Trial Software that displays the error can not be restored to run.
Solution 1: Run the License Repair Tool
Close any Adobe applications.
Download the License Repair Tool:
www.adobe.com/support/contact/licensing.html
Run the License Service Update.
1. Double click the LicenseRecovery111.dmg
2. Double click the LicenseRecoveryLauncher.app.
3. Enter your administrator username and password when prompted and click OK.
4. Follow the on-screen instructions.
Start your Adobe application(s).
Important: The patch applies to Creative Suite 3 or 4 products, Acrobat 8 or 9, Photoshop Elements 6 or 8, Director and Technical Communication Suite. If your issue was not resolved on the first attempt, run the patch again and enter option 0, when prompted to do so.
Solution 2: Delete the FLEXnet Publisher preferences folder
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Quit all Adobe applications.
On your startup disk, locate and rename, or copy to the desktop and then delete, the following folder:
/Library/Preferences/FLEXnet Publisher/
Start your Adobe application(s).
Solution 3: Repair Disk Permissions
Launch the Apple Disk Utility:
/Applications/Utilities/Disk Utility.app
Select your startup disk.
Click Repair Disk Permissions.
Note: This can take considerable time. For more information about using Disk Utility, consult Apple's website.
Start your Adobe application(s).
Solution 4: Reset your permissions on the FLEXnet Publisher licensing service folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/FLEXnet Publisher/
Solution 5: Reset your permissions on the Adobe PCD folder.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
Use the permissions instructions below to modify the permissions on the following folder on your startup disk:
/Library/Application Support/Adobe/Adobe PCD/
Permissions Instructions:
Close out of all Adobe applications. Follow the directions below to modify permissions to the folder.
Note: This solution requires administrative privileges on your computer. You will need to provide administrative credentials.
On Mac OS X 10.4
Using Finder, navigate to the folder to be modified.
Control+Click the folder, and then select Get Info.
Expand the Ownership & Permissions section.
Click the Details option to show the various owner and group options.
Verify that you have Read & Write permissions.
Click the lock icon next to the Owner field, choose yourself as the Owner, type in your administrator username and password when prompted, and click OK.
Change the Owner to system.
Change the Permission to Read & Write for Owner.
Click Apply To Enclosed Items and click OK to the warning dialog.
Type in your administrator username and password when prompted and click OK.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
On Mac OS X 10.5
Using Finder, navigate to the folder to be modified.
Control+Click on the folder, and then select Get Info.
Expand the Sharing & Permissions section.
Click on the Details option to show the various owner and group options.
Click the lock icon in the lower right corner. Type in your administrator username and password when prompted and click OK.
Change your username to have Read & Write permissions.
Change admin to have Read & Write permissions.
Change Everyone to have Read & Write permissions.
Click the Gear icon and select Apply To Enclosed Item.
Close the Get Info dialog box.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 6: Remove the SQLite journaling file.
Important: The path listed below refers to the Library folder that lives just inside your startup disk, not the Library folder inside your user home folder!
The journaling file exists only under specific circumstances where a client is accessing the database file with certain options enabled. If the file does not exist, continue to the next solution.
Using Finder, navigate to:
/Library/Application Support/Adobe/Adobe PCD/cache
If present, delete cache.db-journal.
Launch Adobe Acrobat 9 or an Adobe Creative Suite 4 product.
Solution 7: (Acrobat 9 only) Reinstall on a non-case-sensitive file system.
Adobe applications are not supported on an OS formatted with a case-sensitive file system. If you attempt to install an Adobe application on a case sensitive volume such as a UFS, HFS+ case sensitive (HFSX) or SMB formatted drive, you get an error that the file system of the setup drive is not supported. Only Acrobat 9 doesn't display such error message and allows you to install the application, but attempting to launch Acrobat 9 results in the error "Licensing for this product has stopped working (error code 130:9)." The drive needs to be reformatted to a non-case-sensitive file system.
To check if MAC OS X is formatted with a case-sensitive file system :
From the Apple menu select About this Mac.
Click More Info and under Hardware select Serial-ATA.
Select the drive Acrobat 9 has been installed on and check the file system in the list. Note if the file system is case sensitive.
Alternatively, use the Disk Utility to check the file system:
From Applications > Utilities, launch the Disk Utility
Select the disk Acrobat is installed on and check its format.
Solution 8: Contact Adobe Technical Support
Adobe Technical Support can obtain logs from your machine to determine additional information about the failure. Contact Adobe Technical Support if the information provided has not helped to resolve your issue.
Additional Information
The Flexnet folders/files required to run Adobe applications can get corrupted, or have permission settings problems, if moved from one machine to another, or through a system restore from Time Machine. Flexnet service licensing failures can't be resolved by re-installating the appliaction, nor will the Adobe CS3 or CS4 Clean Scripts solve this problem. If permissions issues prevented the FLEXnet licensing service from launching, accessing its data, or communicating with Adobe processes, the licensing failure is expected.

ITUNES Stopped working error messages?

How do you fix the ITUNES stooped working error message?

How do you fix the ITUNES stooped working error message? I am using Windows 7.
This is a follow to my original question.

Stop working error on launch

I uploaded the most recent version of Itunes and it worked for about three days. Now everytime I try to open it I get the message" A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available" I am running Windows 8. I have installed it and uninstalled it many many times to no avail.

Hi dondatoz,
If you are having an issue with iTunes unexpectedly quitting on your Windows machine, you may find the following article helpful:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Regards,
- Brenden

Itunes stops working right after launch

As of yesterday, when i open itunes , a few seconds after opening it stops working and shuts off
I cant do anything to fix I have tried uninstall and reinstall, restroe points, and previous versions,
nothing has worked, please help

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2

Get photoshop has stopped working error on Launch on my Win 8 pc

About two weeks ago I downloaded Adobe CC for students, my problem is that photshop is not working. When I start the program i get the following message:"photoshop has stopped working and needs to be closed, windows will tell you if there is any solution in the future" I have tried to re-install it twice, and I just updated the program.
I got windows 8
Hope to get some help soon! Thanks!

Does this happen only with Photoshop CC or with other Adobe apps like InDesign CC & Illustrator CC?
What version of PS CC do you use?
Try updating to Win 8.1 and that should install all the required windows updates and then check the same.
You still want to install the video card driver from the manufacturer website, as already suggested by Chris, to be double sure that you have the right GPU drivers installed.
In case your PS still crash, check Event Viewer for the Faulty Module and let us know.
http://support.microsoft.com/kb/308427
Event Viewer > Windows Logs > Application
Look for "Error" in red color and check the Application name and faulty module.
Cheers!
~ Arpit

How do I fix the "iTunes stopped working" error?

Everytime I restore my iphone i get this .... The title says it all.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Itunes stops working as soon as it reads first track while importing CD (APPCRASH). Need help!

Itunes stopped working error comes up as soon as it reads first track while importing CD and needs to close program (APPCRASH). I have uninstalled and reinstalled iTunes several times - also ran CD diagnostics in iTunes and looks OK. I'm on Vista Home Premium Edition. If it will help I saved the CD Diagnostics from ITunes and the Windows APPCRASH info. I've spend several hours trying to figure this out. Any ideas?

Problem solved! I had my pc plugged into a port replicator to use a bigger screen, etc. When I unplugged it and tried to import the CDs it worked fine. Not sure why I got the error but whenever I get unexpected errors in the future, I will take it off the replicator to eliminate that possibility. Thanks to all who reviewed.

ITunes stopped working? ITunes closes. win8 64bit

Hi,
Just got a new Dell XPS Windows 8 64bit.
Installed iTunes.
Ran it for the first time; tried to connect to the iTunes Store and got an error: "iTunes Stopped Working".
Application closes.
I have tried reinstalling; same issue.
Can you help please?
Thanks

Hey sergekhachatour,
I would run through the suggested troubleshooting steps in the following article:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717
Take care,
Delgadoh

Please HELP, "iTunes has stopped working" error after connecting iPod video

People please help me out! I have a Razer Blade gaming laptop with Windows 8 64bit.
I have an iPhone 5, iPad 2 and an iPod video (80GB). I had some weeks from not connecting the iPod to my computer, but this morning that I did so I can upload some new music to it, iTunes just crash, I get the "iTunes has stopped working" error message when I connect the iPod video. I do not have this problem with either the iPhone 5 or the iPad 2, when I connect these, iTunes works fine, once I connect the iPod, then all goes down
Procedures that I already tried and that were unsuccessful to solve the problem:
Uninstall Quicktime
Uninstall iTunes and reinstall
Reset the iPod (several times)
Delete TEMP files on computer
Restart the computer (several times)
Use a different cable and a different USB port
The iPod is working fine, if I plug it to my car stereo or if I use it with headphones it works great, no problems nor errors. My computer also identify the iPod as a hard disk, no error messages from Windows, it is just the freakin' iTunes that freezes everytime that I plug the iPod
PLEASE HELP ME OUT, I've searched forums on this particular issue but with no luck.
Thanks very much!

It is only when I attempt to add a song to my iPod once plugged in that I receive the error "Itunes has stopped working" and forces me to exit the program, without the song being successfully transferred.
Do you have the "Convert to 128 kbps AAC" preference enabled for syncing to the iPod, laur?
If so, it's quite plausible that you've got the iTunes 10.1.0.54 bug and we need to get you updated to 10.0.1.56 as per the following document:
[iTunes 10.1 for Windows: iTunes may stop working and need to quit while importing or syncing audio|http://support.apple.com/kb/TS3591]

Keep getting "itunes has stopped working" error.

Keep getting "itunes has stopped working" error. Just updated to windows 8.1, updated java (i installed java on windows 8 for work), & ran the solve a problem with itunes fix from my pc. Still crashes when i go to itunes store or try to sync my ipod. Itunes says their is no solution, my pc can't find a solution, and I've tried several fixes online (copying the .dll file, running in safe mode, running as administrator, reinstalling itunes) nothing is working for me.

Hey Cassblue21,
Thanks for the question, and great troubleshooting so far. While you may have already attempted most of the steps outlined in this article, I wished to provide it to you just in case you missed something. The article includes great isolation steps to determine if the issue is user-specific, or system-wide. Once you have isolated the issue, a few solutions are offered:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Thanks,
Matt M.

Itunes stops working when i connect my ipad windows error message comes up looking for solution but then closes itunes.

Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.

Hi tokley13,
To troubleshoot this issue where iTunes is quitting unexpectedly, please follow the steps in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
Thanks for using the Apple Support Communities!
Cheers,
Alex H.

Itunes stopped working. error message ADiAdID

itunes stopped working. error message ADiAdID

Hello alanllc,
The article linked below provides some useful steps that can help get iTunes working again.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/TS1717
Cheers,
Allen

"Itune has stopped working" error message HELP!

I tried to open up the itune program, double clicks, no response and an error message pops up saying "Itunes stopped working" and then it sends an error report to Microsoft. What do i do? I tried re-installing. SafeMode start. deleted files that were maybe corrupted, as stated in Apple support forums.

Try working through TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues to start with.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Itunes stopped working error on launch win7 64bits

Similar Messages

Maybe you are looking for