ITunes stops burning shortly after starting...no errorm. !

Hi,
I have a Plextor PX-712A DVD burner with newest firm ware (1.07) and iTunes 5.01.
iTunes recognizes this burner. When I push the button, iTunes starts burning, writes several MB to the CD and just stops at the very beginning of the first track. It sticks until I quit the process. Of course I can throw the CD to the garbage can.
Some older version of iTunes had the same problem. I hoped that 5.01 would solve the problem...it didn`t ! HELP !
I use Windows XP Prof. and Nero has no problems with my burner.
Thx !

I'm not sure I know what you mean when you say you did a network test and it stayed connected.
On the matter of signal strength, it is possible to have good signal strength but still experience interference.
If you play a movie from your iTunes library, start it and pause for 20 minutes or so, how much of the movie has downloaded, if you then start it playing do you experience the same problem.

Similar Messages

Movie just stops playing, shortly after starting it.

We started watching a Netflix movie, got 15-30 seconds into it and it just stops. It goes back to the menu screen every time - no error message though. It did it over and over, so we tried a different movie. It did the same thing, but it waited until we were about 2-3 minutes into the movie. What's going on?

I'm not sure I know what you mean when you say you did a network test and it stayed connected.
On the matter of signal strength, it is possible to have good signal strength but still experience interference.
If you play a movie from your iTunes library, start it and pause for 20 minutes or so, how much of the movie has downloaded, if you then start it playing do you experience the same problem.

ITunes keeps freezing shortly after starting.

I think it is occuring when its connecting to iTunes match. Have latest version of iTunes and I have already restarted my computer. When I restarted my computer I also got a message that I could not connect to iCloud ecause of a server issue. Are these two things related?

Oh never mind. It's suddenly working again.

IChat stops unexpectedly shortly after starting a Video session

Hello all,
I am trying to set up a new iSight and begin using iChat for the first time. iChat 3.0 did not let me do much of anything but connect to AIM. I updated the system to 10.4.4 and iChat now lets me update mt buddy list and open a video session with a friend.
The problem is the iChat consistently shuts down unexpectedly shortly into the session.
Some information:
I have an ethernet lan with four computers. I am using an Acsense Palm HUM-5E, and a Linksys BEF SR11 cable router. I thought there was a built-in firewall in the router, but I am not a techie so I am not sure.
Help!
Thanks,
Kent

Hi Kent,
Welcome to the Apple Discussion Pages.
Yes port need to be open the in the Linksys
This page should help.
I can not see that this device had UPnP.
It appears that they have used different pics from different Firmware versions as well which is not helpful.
The UPnP Forwarding shown is not what you need !!
If there is a tab that says Administration then see if that has UPnP in it. Otherwise use the intruction shown.
Please not they have marked each port as open for UDP and TCP and this is not required in all cases.
Jabber ports 5220 and 5222 and the undocumented 5223 need TCP only
The AIM login port needs both TCP and UDP
All the others 5060, 5678, 16384-16403 need UDP only.
The page linked does not deal with Bonjour which needs
5297, 5298 and 5353 on UDP and 5298 need TCP as well.

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application"

After updating itunes three (3) days ago - itunes close shortly after starting with the message "a problem occured and cannot be solved, please close application" - Platform: WIN7 - iTunes 11.2.9.115

Start with the third box in Troubleshooting issues with iTunes for Windows updates.
If that doesn't work, use the steps in the second box to repair your iTunes installation. Your library should be unaffected by these steps but there is backup advice elsewhere in the user tip.
tt2

ITunes stops responding immediately after opening

My iTunes stops responding immediately after opening and even force-quit doesn't do.
Baically it freezes between pressing it and opening the window. In my large library, I can see that it loads it and then nothing more. The menu appears and then the wheel. Force quitting doesn't shut the program, no matter how I do it. It leaves the arrow and the only way is to restart the computer and start again.
I tried using another account, and it does the same. I tried with a new library. I tried with new prefs folder both on the user and on the Mac HD. I tried reinstalling iTunes. I even tried reinstalling the whole OS X - but nothing. The only thing is that after zapping PRAM it might work once or twice, but no more.
This is with iTunes 7.0.2, QuickTime 7.1.3 and OS 10.4.8
I don't know what else to do.
Any ideas?

I'm having the same problem. It started recently - maybe about two weeks ago - and occasionally when I launch iTunes it just freezes. I can't force quit it completely - it still shows in the Dock as though it's running, though it's not present in Activity Monitor.
Curiously, I've also had a couple of kernel panics when clicking iTunes buttons in the past week. I don't recall any system update that might have affected either iTunes or QuickTime, so I'm stumped... The only way to get iTunes back is to log out or restart.
Kirk

Backup Freezes shortly after start

I've a recurring problem with Time Machine, whereby the backup appears to freeze shortly after starting. No error message is reported and I can see nothing in the log.
At first it seemed to be caused by my children's log-in still being active but it's not that. It does seem to happen more when my wife has left lots of applications open, including MS Word with lots of documents.
I've checked the external disk (Lacie 500GB), even erased and reformatted it (Mac OS Extended (Journaled), same as by iMac hard disk) but to no avail. Stopping the back-up does nothing. Pulling the cable or turning the disk off whilst kills the current back-up doesn't cure the problem.
The only solution is to restart and run a back-up straight away.
Any ideas?
Steve
8-)

Wackers wrote:
I've a recurring problem with Time Machine, whereby the backup appears to freeze shortly after starting. No error message is reported and I can see nothing in the log.
Unfortunately, a lot of things can cause this.
Let's take a look at the log: there may be a clue. Download the +Time Machine Buddy+ widget from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html. It shows the messages from your logs for one TM backup run at a time, in a small window. Navigate to one of these stalled backups, copy and post the messages here (be sure to get them all, as sometimes they overflow the small window).
At first it seemed to be caused by my children's log-in still being active but it's not that. It does seem to happen more when my wife has left lots of applications open, including MS Word with lots of documents.
That sort of thing might slow it down a bit, but shouldn't be much.
I've checked the external disk (Lacie 500GB), even erased and reformatted it (Mac OS Extended (Journaled), same as by iMac hard disk) but to no avail.
Also check the *Partition Map Scheme* shown by Disk Utility on the first line of the drive (the one with the make and size). It should be GUID for an Intel Mac, +Apple Partition Map+ for a PPC Mac.
Is your LaCie Firewire or USB? How is it connected?
Does it have it's own power supply, or does it get power from your Mac?
Are you running FileVault, any virtualization software, or any significant non-Apple software?
How much data is on your internal HD?
That info plus the logs should at least get us started.

Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up?

When I started my iMac today, it started beeping like an alarm horn. I shut it down, and held the startup button a little longer to get it to start. Shortly after starting up, a dark 'film' slowly comes down over the screen and I get a message saying I have to shut down the computer. I've tried to start from the disk, and before I can even run a repair off utilities, it happens again. What's up? Am I screwed? HELP!!

What you are seeing is a kernel panic, often but not always connected with a hardware or peripheral issue, so, unplug everything except mouse and keyboard, reboot and hold the shift key as soon as your hear the chime, continue holding it until you see the Apple Icon and spinning progress indicator, then post back.
It will take noticeably longer than normal to start.

My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
B-rock

TS3276 Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

Mail application keeps shutting down short after start up - resulting in an error message. how can I repair what is wrong without losing my mail history?

Will I lose my emails I have on there? I have numerous client email files and can't afford to lose any of them. I do have everything backed up but I'm fearful of losing important client info. What if something happened during the back up and it doesn't have my files?

After doing an OS update, now iTunes stops playing music after playing a few songs.

After doing an OS update, now iTunes stops playing music after playing a few songs. Any thoughts about how to remedy this?

Same Problem here. Also, when this happens, it loses whatever album art was playing before. I've tried reinstalling and it doesn't help. Any ideas how to fix this? It's really annoying!

My spaces and mission control stop working shortly after startup

My spaces and mission control stop working shortly after startup. The feature to activate it on the keyboard won't work, also trying to open the app itself doesn't do anything and the multitouch two finger swipe and hpt corners I have setup don't do anything as well. Any idea on what might be conflicting to cause this?

Try moving your com.apple.spaces.plist from the preferences folder to the desktop then give it a try. To get your preference folder you will need to hold down the option key while clicking on the go menu in the finder then click on library then click the preferences folder.

Why does Itunes stop working when I start to play a movie

Why does Itunes stop working when I start to play a preview or watch a downloaded movie rental

Let's try the following user tip with that one:
iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

Shortly after starting Firefox the "music" reminiscent of Pac-Man starts. It is only on Firefox (haven't tried Thunderbird) even following an uninstall and re-install of Firefox. Just started today. Am using XP Home SP3.

How to get rid of Pac-Man sounds
Shortly after starting Firefox the "music" reminiscent of Pac-Man starts. It is only on Firefox (haven't tried Thunderbird) even following an uninstall and re-install of Firefox. Just started today. Am using XP Home SP3.
== This happened ==
Every time Firefox opened
== Only today (5/21/10) ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.04506.30; .NET CLR 3.0.04506.648)

Dear Firefox:
I am not amused with the pac-man music. I spent the entire trying to find a virus on my computer. I might have tolerated this as an April Fool's joke, but this "celebration" was completely unnecessary!
And to others trying to fix the problem ... I just uninstalled Cool Previews and that did the trick. No more bat-shit-crazy pac-man music.

URGENT - OracleListener stopped right away after starting it manually

Hi,
I have OracleEX 10g and Odp.NET 11g insalled in my machine, today I de-installed ODP.NET 11g, after that I could not make the database to run anymore, I tried to run OracleExListener in the Services, but it stopped right away after starting it.
how to fix this?

Thank you very much for your reply :)
I am very bigginer with Oracle, but I can provide you with the infor in the listener.log
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 20-FEB-2008 14:17:50
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=912
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
Error listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=user)(PORT=1521)))
TNS-12545: Connect failed because target host or object does not exist
TNS-12560: TNS:protocol adapter error
TNS-00515: Connect failed because target host or object does not exist
32-bit Windows Error: 1001: Unknown error
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
I am not faimilar how to reconfigure, and I would really appreciate if someone can give step-by-step guid..
thanks,

ITunes stops burning shortly after starting...no errorm. !

Similar Messages

Maybe you are looking for