ITunes stops playing and cannot connect to Remote app whenever the computer display turns off??

I have a Windows system with iTunes, and an iPhone with the Remote app installed, through which I use to play music on iTunes. Until recently iTunes would play regardless of whether my monitor was on or not, and I could connect to iTunes with the Remote app regardless of the monitor state. Now, however, after updating both iTunes and Remote with the new versions that came out around the time of the iPhone 4S release, whenever my computer turns off my monitor, iTunes stops playing at the end of the current song and the Remote app cannot find iTunes. This is not a system sleep state, I just have the power options set to turn off the monitor after 15 minutes of inactivity. Sleep and hibernate are disabled on the system and always have been, expressly for the purpose of allowing iTunes playback via Remote. If I jiggle the mouse and the system turns the monitor back on then I can manually reenable playback, and Remote can connect to iTunes again. I can't find any setting in Preferences that would control this. How do I fix this? Thanks.

I'm so glad someone else is having this problem.  I am in exactly the same situation!
1. Windows Vista
2. Upgraded iTunes to 10.5 and upgraded remote with iOS 5
3. My computer has never been set to sleep, but the monitor turns off after 20 mins.
4. If the monitor goes to sleep, itunes stops streaming music and Remote can't connect to it
5. If I change my monitor off time to 1 hour, then in 1 hour itunes will stop streaming - it is ABSOLUTELY connected to the monitor sleeping.  Almost like iTunes can't connect to the network the the monitor is off.
Please help!  I have been using remote for a year and this didn't happen until I upgraded to iTunes 10.5.

Similar Messages

  • Itunes stops playing and the screen goes dark

    Hi, I have macbook pro 13" and had never experienced this until yesterday and today. The itunes stops playing music, the screen goes dark and it's still charging. Has anyone experienced it?

    Boot from you install disc, run Disk Utility. The startup disk may need repairing.
    Using Disk Utility to verify or repair disks

  • ITunes stops working and closes on opening with Match on, works fine with match off

    iTunes stops working and closes upon opening with Match on, works fine with match off

    I am having the very same problem with iTunes, I'm running Windows 7 64 bit and started having the problem after the latest update. I just upgraded to the new 5s and was syncing everything to it, so I figured that I would update my itunes software as well. Which I never do after updating one time and had trouble with it on my old laptop and had to rollback to a older version of itunes. I have tried every suggestion that has been posted in the Apple Discussion area and on other websites no luck what so ever. I figured I will wait till Apple comes out with another update and try again. In the post above I am having the exact problem with iTunes.  I'd love to know what thef-ing problem is because this is extremely annoying!

  • HT1947 Cannot connect to "Remote" App to iTunes 11

    After I have upgraded to iTunes 11, the "Remote" app cannot connect to iTunes 11.  I hav edeleted the app, and re-download it.  It asks me to key in the 4-digit code on iTunes.  But I cannot find the Device List any more in iTunes 11.  Anyone knows how to resolve this.

    It turns out that the "Remote" app has adopted the "Home Sharing" function instead of using a 4-digit code to pair an iDevices with the iTunes. 
    But my problem had more twists and turns.  Initially, I thought that it was Norton firewall that blocked the "Home Sharing".  After many trials, I found that the Actiontec router supplied for Verizon FIOS blocked the "Home Sharing".  After I disabled the IGMP proxy in router, everything worked as designed.  I would have never figured this one out.  Thanks everyone for posting on the different forums.
    http://forums.verizon.com/t5/FiOS-Internet/Communication-between-wired-and-wirel ess-network-on-actiontec/td-p/461359

  • ITunes stopped working and now all of my apps for my iPhone and half of my music is gone. How do I get it all back?

    I've recently upgraded to an iPhone 5, I had just restored my old iPhone 4 to its original settings while listening to my music. When that was finished I plugged my new phone in and I had an error message pop up saying "iTunes has stopped working" and had to close it. When I reopened iTunes all of my apps for my phone were gone along with half of my music library. The only music I have left are the albums I have downloaded the rest is gone. I closed and reopened iTunes several times and got the same message each time.
    I have music and apps on the phone which will not transfer back to iTunes. All iTunes does is ask if I wan't to delete the music on my phone and sync with the library........ silly question really as half of the music in the library is gone!
    I have been using iTunes for many years now and this is the first time I have seen an error such as this. Can anyone tell me how to restore my library to the same as it was? I have fixed the "iTunes has stopped working" issue and would like my music and apps back.

    See this post.
    tt2

  • 9300 Curve wifi problem - cannot connect to internet using only wifi once data turned off

    I've got a 9300 Curve with a data plan from Rogers. I want to use my wifi in hotspots when I go overseas without using my data. I have no problems connecting to wifi networks. Once I turn off my data services, my connections to the wifi network show that the signal is still just as strong, but I can't use my browser, facebook, bbm, etc. - message is "unable to connect to internet" when I try and access my browser. This problem occurs whether I'm using a public hotspot or my home router. I used to be able to access wifi without using data from Rogers on my older Curve (can't remember the model), so I don't think it has anything to do with my plan.
    Any suggestions/advice would be much appreciated!

    Thanks for the reply!
    Did you mean "leave data ON and turn off data roaming"? But that would just turn off my data while I'm roaming, and while I'm not roaming, it'll still access through data and not through wifi like I would prefer. That's what I understand, but pls correct me if I'm wrong! I guess I meant to also mention that whether I'm in my home zone or overseas, I still can't use my browser, bbm, etc through wifi only, with data turned off...it just says there's no connection to the server/internet, even though it shows that I'm connected to a wifi network.

  • My iphone doesnt have app store or itunes on it, and when i plug it in to the computer it doesnt appear on itunes

    hey everyone i bought an iphone 4 and it doesnt have itunes or app store on it, and when i plug it into the computer it doesnt appear on itunes plz help!!!

    Are you sure this is a real iPhone 4? People in my area are trying to pass off knock off versions of the iPhone, as the real thing.
    If its the real thing, then Reset your iPhone, then try again.

  • I'm trying to turn off the "Handoff" feature. When I go to "settings and then general" I do not have the option to turn off "Hand Off".  Help Please

    Can't seem to make this work.  I am up to date with my updates on both I-Phone and I-Pad.  The "Hand-off" feature is working, and I don't want it.  How do I turn it off?  I don't have the option to do that when I go to General & Settings.  Is it located somewhere else?  Apple says that is where it is.  What am I doing wrong,  The "wonderful feature" is driving me crazy.  Surely it is others also...
    Deb *******
    <Edited by Host>

    Hi debinarizona,
    I see the Handoff setting under "Settings > General > Handoff & Suggested Apps".
    Connect your iPhone, iPad, and iPod touch using Continuity
    Best Regards,
    Nubz

  • I have a problem today every time i connect a usb mouse on the macbook pro turns off.

    I have a problem today every time i connect a usb mouse on the macbook pro the laptop turns off. What could i do to fix it?

    Execute SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    If no success, try another mouse.  It may be faulty.
    Ciao.

  • HT2292 I have a 3GS iphone.It was working alright with iTunes.Recently, it was unlocked. After it was unlocked, the iphone is functioning alright but it is not recognized by iTunes and iTunes stops working, when I connect iphone.Any advice please.

    I have a 3GS iphone. It was jailbroken and working alright.But I was not able to upgrade its IOS frrom 4.0.1 to higher versions and many applicatopns were not compatible with this version of the IOS. So I decided to do a factory unlocking. From an website, based in Mumbai, I unlocked it. When I check now in different websites from my IMEI number, my iphone is unlocked. So I became happy that I can now upgrade my iphone. But the events turned to be different.When I connected to iTunes, iTunes stopped working and my iphone did not appear in the iTunes. I uninstalled and reinstalled iTunes after cleaning previous registry of all relatedd components like Quicktime, Bejour,Apple software updates and mobile softwares. I also used msconfig to troubleshoot conflicts in software of Windows 7 ultimate but still my iTunes is not working, when I connect the iphone. If I do not connect the iphone, iTunes is working alright. Can any friend give me some advice how to proceed. I do not like comments like Jailbreaking is illegal and should not have been done. Please advice me what should I do right now. Thanking you all and expecting some valuable suggestions from this expert community.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • I just factory restored my iPod 5 touch and when I plug it into iTunes to restore the back up I made, iTunes becomes unresponsive and closes. But when I unplug the iPod, it starts working again. Using Windows 8 and iTunes is updated, please help.

    I just factory restored my iPod 5 touch and when I plug it into iTunes to back it up, iTunes stops responding and closes. This only occurs when the iPod is plugged in, when it isn't, iTunes works fine. I am using Windows 8 and iTunes is updated (as of this posting). Any suggestions on getting around this? Thank you.

    Also, when I put it through the Windows diagnostic, it lists an "incompatible program" WHILE my iPod is plugged in.

  • HT1386 During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect

    During iTunes update on my pc, my iPhone was connected to pc via usb & was syncing, suddenly my iPhone stopped connecting to wifi and cannot activate. I cannot access iPhone data as it says connect to iTunes to activate but cannot connect. How do i connect to iTunes to activate iPhone as iPhone cannot connect to WiFi or any other network
    Please how do i reactivate iPhone?

    Hello DadiPrince,
    The following article contains information beneficial to getting your iPhone back into normal working order.
    iPhone: Troubleshooting activation issues
    http://support.apple.com/kb/TS3424
    Resolution
    Perform the following steps if you receive one of the messages above:
    Restart the iPhone.
    Try another means of reaching the activation server and attempt to activate.
    Try connecting to Wi-Fi if you're unable to activate using a cellular data connection.
    Try connecting to iTunes if you're unable to activate using Wi-Fi.
    Restore the iPhone.
    If you receive an alert message when you attempt to activate your iPhone, try to place the iPhone in recovery mode and perform a restore. If you're still unable to complete the setup assistant due to an activation error, contact Applefor assistance.
    All the best,
    Allen

  • ITunes cannot connect to remote speakers / Airport Express

    Hi Guys
    This is a quick post with a problem & solution.
    I've been searching for ages tonight to find a solution to my problem:
    'iTunes suddenly cannot connect to my Airport Express Speakers" and could not find one answer on here, only a mixture of replies all over the net.
    So, just incase some people are still looking for an answer:
    What I did...
    1. Go to System Preferences, Network.
    2. Click Advanced, on the TCP/IP tab, set "Configure IPv6" to Off.
    Open up Airport Utility, go to the Music tab, set a password (I did this just for the sake of seeing whether iTunes noticed that the Airport was now password protected, then atleast you know it's talking!)
    3. Open iTunes, go to preferences.
    4. Click on the devices tab, untick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    5. Close iTunes
    6. Open iTunes, retick "Look for remote speakers connected with Airplay, Allow iTunes control from Remote Speakers, Forget All Remotes.
    7. Connect to remote speakers worked!

    thanks Simius,
    I just tried what you said to do, i had it in Automatic, but when I momenterely switched to manual the fields were all blank so I left them that way and turned on to automatic as you said and left it in auto, then tried to change itunes speaker to remote airplay and it didn t work.
    so i don t know what else to do, I read alot about this in the last few days the bug seems to be related to the newest itunes upgrade and with the presence of the IP6V not turned off completely.
    in the old system one could turn it off completely, now the off button is gone.
    there are work around using terminal, I tried that but it doens t recognize my commands, so it didn t work either.
    anybody has any idea?
    thansk a lot
    D.

  • What happened when a rented movie stops playing and says cannot load movie?

    I rented a movie and while I was watching it, it stopped playing and an message popped up that said cannot load movie.  Can I fix the problem and finish watching the movie?

    Hi Colzona!
    You may need to report an issue with this purchase using the information in the following article:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/ht1933
    Thanks for being a part of the Apple Support Communities!
    Cheers,
    Braden

  • My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

    My new iphone4 won't connect to the app store or iTunes. It says cannot connect to iTunes. But I logged into the game center and onto this web sit. I tryed some fixes on here but nothing has worked. Suggestions?

    HI again Andy,
    The last message had some more stuff in between the "Hello" and "Regards" - I have no idea what happened to it. But nevermind...
    I started up the Mini with the modem in one usb, and the speaker system in the other (M-Audio Sonica Theatre) - I have one of the Minis that have only 2 USB (and one FireWire) ports. The firewire has the external drive connected to it.
    So far, as I"m typing this, I AM able to be online and use iTunes simultaneously. (both SaFari and iTunes respond slower than if I was using only one or the other, but they ARE actually working - in addition to having Adium running) - So I think what you suggested ( that is was something wonky was the USB hub) was a correct, yet assessment.
    Would you have any reccommendations for USB hubs? The only thing that I have connected to the hub under normal circumstances that would be constantly "running" would be the RadioShark (even though the Radio soft isn't playing - the blue light on the RadioShark is always on) - and the speakers naturally. Everything else is of the occassional variety - iPod Sync Cable, Dual Layer External DVD Burner, and a "pass thu" to the USB ports on my Hard Drive Enclosure (which had been unplugged before the problem was noticed). The hub I current use is the
    Kensington DomeHub USB 2.0 (7 ports) Weighted Hub 33118 http://www.amazon.com/Kensington-DomeHub-ports-Weighted-33118/dp/B0002FHENE/ref= sr16/002-4275642-8664817?ie=UTF8&s=electronics&qid=1187848108&sr=8-6
    which (I thought) worked better than the "throwaway" ones I had used previously.
    You think it is the hub or something connected to it that may be causing the problem?
    Regardless, thank you for your time, and I hope to hear from you soon.

Maybe you are looking for

  • I bought the wrong version of an album.

    I bought the clean version instead of the explicit version. Is there anything I can do about this?

  • Offline Mail actions "undone"

    I get the following message in a dialogue: Some actions taken while the account XYZ was offline could not be completed online. ... Mail has undone actions on some messages ... Apple Mail To Do <blah blah> (I'd love to attach a screen shot but that do

  • Installing windows 7 on MBPr 15" late 2013

    I want to install windows 7 on my MBPr so I created the partition and Pen Drive using BootCamp. Every was Ok till I booted the windows 7 installer, I got stuck at the first screen ( choosing language )! Because there were no input sources. I tried to

  • Java Script error in email sent using extended email notification

    We are implementing the extended email notifications for workflow.  We have the workflows being sent to Lotus Notes.  However, when we open the email, we receive the message 'A JavaScript error was encountered while loading a page.  Error on line 35:

  • QuickTime 7 install on vista (64)

    Can't seem to get QuickTime 7 Pro installed on windows vista (64). Instructions tell me to go to settings , control panel, QuickTime 7 but every time I try to uninstall QuickTime downloader and reinstall qt7 it goes back to qt (not 7). Help