Itunes stops working when I import

I'm trying to import book files from my attached storage device.  Everytime I click "add to itunes", I get an error message that iTunes has stopped working.

there's a bug with 10.1.0.54 that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices.
Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
(1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though) and/or switching off the option to convert files to 128 kbps AAC when syncing.
(2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
(3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
(2 and 3 do help with the device-syncing variation.)

Similar Messages

  • Why does my itunes stop working when I import a file?

    I can now only start iTunes in safe mode, and if I import a file, it stops working.  Help/

    iTunes is not fully functional when operating in Safe Mode, so its possible that the component that supports Audible content is not running.  If iTunes will only run in Safe Mode then there's an issue with your installation - see Turingtest2's tutorial Troubleshooting issues with iTunes for Windows updates, in particular the section on removing all components of iTunes before installing the latest version.
    I have Audible .aa files on a 2nd gen iPod Nano so there shouldn't be an issue with age ...

  • Itunes stops working when accessing the store what needs to be done to get it working again?

    itune stops working when accessing the store.  What needs to be done to get it working again?

    Hey Baitmaster61!
    Here is an article that will help you troubleshoot this issue:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    If you are still experiencing issues with reaching the iTunes Store, you may also need to reference this article:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Itunes stops working when copying apps during Sync

    Hi I am using Itunes 12.01.26 on a Windows 7 PC
    My library is saved on a nas server and the network drive is mapped.
    I have an ipod 5 and Iphone 5s
    Up until october this configuration has works a treat however since about October I have had difficulting in Syncing.
    I cannot sync my music  - everything i try fails so as a last resort i have tried to restore my devices.
    Itunes stops working when it gets to the stage of copying the apps.
    I have read a suggested solution to move the library to the local C drive but this does not seem to be reasonable solution particularly as my library is large.

    Same problem here with Win 7 64 bit & iphone 4.  It all started a few weeks ago with itunes upgrade 10.4.8.   After about 20 hours wasted time, uninstalling and re-insstalling all Apple products in the suggested order as suggested on another forum.  Still had the same problem.  Will sync fine until I check the "videos" tic box.  Itunes stops working in the step of "optimizing photos" (????).  If I go back and uncheck "videos" tic box, iphone4 will sync just fine.  BUT now all my videos previously on my iphone are on the PC.  I would like them back on my phone! 
    I gave up and went to the Apple Store to visit with a Genius.  Took my PC and everything with me.  It was not from lack of trying, she did all the same stuff I did and checked everything over.  Could not fix it.  She said it appeared everything on my PC was set corrrectly and the problem was probably with itunes.  Said she always waits a little while when updates come out to make sure there are not bugs before putting them on her stuff.  Lesson learned.
    I hope with Steve Jobs gone, this is not the future of Apple

  • Itunes stops working when i connect my ipad windows error message comes up looking for solution but then closes itunes.

    Can anyone help my itunes stops working when i connect my ipad to my computer a windows error message comes up looking for solution but then closes itunes.

    Hi tokley13,
    To troubleshoot this issue where iTunes is quitting unexpectedly, please follow the steps in the article below.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Thanks for using the Apple Support Communities!
    Cheers,
    Alex H.

  • Itunes stops working when I try to upload CD

    Itunes stops working when I go to type in info on audio cd file prior to download

    Ah... interesting. I do have errors in the event log for the Bonjour service for all of the times that I have tried to connect (8 for every time I try to connect). They are on the Vista machine and it says : XXX: ERROR: read_msg errno 10054 (An existing connection was forcibly closed by the remote host.)
    The XXX is different number for each of the 8 and includes: 488, 480,476, 472, 468, 464, 460, and 452.
    It also has an application error for itunes:
    Faulting application iTunes.exe, version 9.2.1.5, time stamp 0x4c47745b, faulting module iTunes.dll, version 9.2.1.5, time stamp 0x4c477437, exception code 0xc0000005, fault offset 0x0040efa0, process id 0x12b0, application start time 0x01cb2f69002ea6c0.
    So I tried to restart and start Bonjour and that didn't help. I have rebooted and that didn't help either.

  • When i sync my phone itunes stops working when optimizing my photos.  why

    when i plug in my phone to my computor to sync, itunes stops working when it gets to step 5 optimizing my photos .  why?

    Did you try to delete teh photo chache? Photo Sync creates iPod photo Cache
    Is there enough free space left on the phone? iTunes needs up to 4x the space to sync the photos than the actual size of the photos to be copied to the phone.

  • My itunes stop working when i was buying my songs and none of them saved my money and music is gone.

    My itunes stop working when i was buying my songs and none of them saved my money and music is gone.

    Downloading past purchases from the App Store, iBookstore, and iTunes Store

  • Why does my iTunes stop working when i try to sync music to my iPhone?

    Why does my iTunes stop working when I try to sync music to my iPhone?

    Morning Bandg72,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at this article:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1717
    Best of luck,
    Mario

  • Why does Itunes stop working when I start to play a movie

    Why does Itunes stop working when I start to play a preview or watch a downloaded movie rental

    Let's try the following user tip with that one:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • Itunes stop working when importing cd

    Every time I try to import a cd, itunes stops working and closes down. What do I do? Please Help! And where did gracenote come from. That never showed up before. Anyone know how to disable gracenote?
    Thanks, Amanda

    There's a bug with 10.1.0.54, Amanda, that is causing "iTunes has stopped working messages" (citing CoreAudioToolbox.dll in the Problem Reports for the error) for some folks when importing CDs with the AAC encoding, adding/converting files to AAC, and in some cases syncing devices (when the convert to 128 kbps AAC option is enabled).
    Short of rolling back your iTunes to 10.0.1.22 and your Apple Application Support to 1.3.2 (CoreAudioToolbox.dll is kept in the Apple Application Support program files), there's a few possible workarounds.
    (1) Change your importing prefs to use a different encoding (won't help with the device syncing variation though), and/or disable the convert to 128 kbps AAC when syncing option.
    (2) Replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12576816#12576816
    (3) Or, replace your CoreAudioToolbox.dll version 7.9.4.0 with a shadow copy of a 7.9.3.0 as per:
    http://discussions.apple.com/thread.jspa?messageID=12583499&#12583499
    (4) Or, if no known-good copy of 7.9.3.0 is available and your PC doesn't have a shadow copy of the 7.9.3.0, you can replace your CoreAudioToolbox.dll version 7.9.4.0 with a 7.9.3.0 by performing some installation gymnastics with the current (11 am 18 Nov NZ time) version of the Safari 5.0.2 installer, as per:
    http://discussions.apple.com/thread.jspa?messageID=12598386&#12598386
    *NB with (4) if you have a 64-bit version of Vista or 7* ... the Apple Application Support program files are instead located at:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support\
    (2, 3 and 4 do help with the device-syncing variation.)

  • ITunes Stops Working When Syncing iPad3

    I have iTunes 10.7.0.21, my iPhone 4S syncs perfectly, however when I try to sync my iPad3, iTunes stops working, here's the problem report log, help please!
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.7.0.21
    Application Timestamp: 504d85d9
    Fault Module Name: StackHash_cb9e
    Fault Module Version: 6.0.6002.18541
    Fault Module Timestamp: 4ec3e3d5
    Exception Code: c0000374
    Exception Offset: 000b06b7
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional Information 1: cb9e
    Additional Information 2: b0e52da0b0493b49d940696ab55ed8af
    Additional Information 3: fb61
    Additional Information 4: df5422ac32f51ce35bf094d13827df89

    I just got a new HP Win 7 64x Intel i7 computer, installed the latest 64x iTunes etc and tried to move my iPad over.   It will synch everything except for photos and videos; it gives the error "iTunes stopped working, program will close" when I try to synch my photos.   I have tried to uninstall and reinstall etc. to no avail, it just keeps doing the same thing.   
    I went back to my old computer 32x machine and successfully re synched and put my photos back on.   This seems to indicate that the problem is either with iTunes compatibility with the version of Win 7 on my HP computer or with the iPad compatibility.
    Anyone find the solution to this bug?

  • HT2292 I have a 3GS iphone.It was working alright with iTunes.Recently, it was unlocked. After it was unlocked, the iphone is functioning alright but it is not recognized by iTunes and iTunes stops working, when I connect iphone.Any advice please.

    I have a 3GS iphone. It was jailbroken and working alright.But I was not able to upgrade its IOS frrom 4.0.1 to higher versions and many applicatopns were not compatible with this version of the IOS. So I decided to do a factory unlocking. From an website, based in Mumbai, I unlocked it. When I check now in different websites from my IMEI number, my iphone is unlocked. So I became happy that I can now upgrade my iphone. But the events turned to be different.When I connected to iTunes, iTunes stopped working and my iphone did not appear in the iTunes. I uninstalled and reinstalled iTunes after cleaning previous registry of all relatedd components like Quicktime, Bejour,Apple software updates and mobile softwares. I also used msconfig to troubleshoot conflicts in software of Windows 7 ultimate but still my iTunes is not working, when I connect the iphone. If I do not connect the iphone, iTunes is working alright. Can any friend give me some advice how to proceed. I do not like comments like Jailbreaking is illegal and should not have been done. Please advice me what should I do right now. Thanking you all and expecting some valuable suggestions from this expert community.

    There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support

  • ITunes Stops Working when I Sync

    Does anyone have a clue for me? I've had no problems syncing my phone until a couple of days ago. Now when I try to sync it causes iTunes to stop working and gives me a message that the problem will be solved if I get the lastest version of iTunes. Oh wait! I have the lastest version! I even uninstalled iTunes and redownloaded it and installed it... No change...

    Same problem here with Win 7 64 bit & iphone 4.  It all started a few weeks ago with itunes upgrade 10.4.8.   After about 20 hours wasted time, uninstalling and re-insstalling all Apple products in the suggested order as suggested on another forum.  Still had the same problem.  Will sync fine until I check the "videos" tic box.  Itunes stops working in the step of "optimizing photos" (????).  If I go back and uncheck "videos" tic box, iphone4 will sync just fine.  BUT now all my videos previously on my iphone are on the PC.  I would like them back on my phone! 
    I gave up and went to the Apple Store to visit with a Genius.  Took my PC and everything with me.  It was not from lack of trying, she did all the same stuff I did and checked everything over.  Could not fix it.  She said it appeared everything on my PC was set corrrectly and the problem was probably with itunes.  Said she always waits a little while when updates come out to make sure there are not bugs before putting them on her stuff.  Lesson learned.
    I hope with Steve Jobs gone, this is not the future of Apple

  • ITunes stops working when labelling CD's, iTunes stops working when labelling CD's

    I am using iTunes version 10.5.0.142 with Windows7. I recently attempted to load some audio CDs into iTunes, unsurprisingly 'gracenotes' could not find the track titles and so I went to label the tracks myself. I right-clicked on the device (audio CD) shown on the listing on the left and right-clicked, and selected 'Get Info' from the pop-up box - this invites you to label all the tracks with the artist, book-title etc. As soon as I attempted to input the artist name  - the screen froze and iTunes stopped working, a box instructs you to cancel and you are kicked out!
    Curiously if you click on each track and select 'Get Info' it allows you to enter all the information track by track and I can successfully import the CD. But what a tedious process with 25 tracks per CD!
    I think this is a software error - hopefully fixed with the next version, but has anybody else experienced this problem?

    Thanks for responding.
    I have found a way around the problem. Import the CD without the information, then find the tracks in the 'music' Library folder and label them 'en bloc' there  (click on the first and last track with the 'shift' key depressed) It will ask you if you want to label multiple tracks say yes.
    Hope it works for you too!

Maybe you are looking for

  • IPhoto shows an error message about an inconsistence

    My iPhoto begins to open, but a few seconds later it closes showing an error message about an inconsistence in my iPhoto library. Then it begins to repair but suddenly it closes again. Thank you.

  • Quality level

    Hi, We are migrating QM related master data from 4.6C to ECC6. We have loaded inspection plan. Please let me know the importatnt fields that we have to check in inspection plan. When we try to load quality level, it gives an error stating inspection

  • Remove marker from chart legend.

    How do I remove a marker with no display name from a legend?

  • Baffled: Win7 64bit, iTunes 9.0.2 64 bit, iTunes won't display

    This is a less than 2 week old install of Windows 7 64 bit (so it's not had a chance to collect much cruft yet), running Microsoft Essentials for security. Got a new iPod Touch 8 gb for Christmas, so it's off to do the iTunes thing for the first time

  • Abort Mapping

    Hello, I'm building some vbscript to avoid xlsx import problem on FDM 11.1.1.3 (tDataMap with reserved chars etc...) but I'm able to do it only for workflow import step by ImportAction. Now, I'd like to stop and abort Mapping if selected file is not