ITunes store print too small and light

Does anyone else with that it were possible to enlarge iTunes store with a two-finger swipe?  Or at the least, make the type bigger and darker.  Thanks for your consideration.

If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

Similar Messages

  • Prints too small and doesn't do margins correctly

    When printing any document, either form Microsoft Word or the internet, the font sizes come out too small and the margins do not match the settings. For example, I have my margins set to 1inch all the way around and yet the printer prints the paper margins at  **Top 1inch, left and right @ 1.3 inches, and the bottom at 2 inches. This is very annoying because it condenses everything and makes the font smaller.  I have already went into all of the settings both in Word and the Printer. Everything is set right, I am using letter paper 8.5 x 11, it is set up to match that paper, and I've double checked everything. And the paper is loaded in correctly. I seriously don't know what to do. I've even tried selecting "fit to paper" under the printer options and nothing has changed. I am really tired of this printer.
    Please help!

    Scatteredskies
    Welcome to the HP Community Forum.
    Every printer I have ever had seems to revel in messing with us about margins - I had the 7520 printer for a year; in my personal opinion this printer is not better or worse in this regard than others.   
    I am not being sarcastic; far from it.  I am fully sympathetic. 
    There is always something going on -- IF it is the printer then it might be one of the following:
    Printers have margin restrictions that can get in the way of the settings - and the results manifest themselves in odd ways depending on the document type (Word, PDF, html, some-other-type).
    Software can have an effect -- Online Word, for example, may not be the same as Word-in-a-Box and a PDF file on your computer is never the same as a PDF file on the Internet.
    If you think the printer is messing with you because the software is tweaked, then you can remove and then reinstall the printer software -- it does sometimes help IF the software is corrupted or out-of-date.
    Install Full Feature Software – Printer
    You can download files from the Internet and try printing them from your computer -- local files frequently print better from your computer than they do from the Internet.  This assumes you can trust the files to be downloaded onto your computer.  Scan any downloaded file with your best Security Software.
    You can try setting Word document margins to Narrow.  This may work as long as you don't get into trouble with other printer margin restrictions of it if doesn't mess up your document.  Depends.
    You can try using Print Preview to adjust the margins.
    You can try -- when using Word - to adjust the Footer / Header to move the Page Numbers / Headers out of the way of whatever Printer margin restrictions exist.  For example, if the printer cannot print within .5 inches of the edge of the paper, make sure the page numbers have been moved away from the edge of the paper at least that far.
    Our British friends know that A4 paper is not American "Letter" paper.  The difference can present challenges - Word offers an Options setting for this to keep the A4 bottom bits from chopping off.  This setting MIGHT do odd things to "Auto" select paper settings in some printers.
    You can try using Printing Preferences / Properties to print borderless -- assuming your paper selection combination and printer supports this.
    For example:
    Printing Preferences > Paper Quality > Advanced >
    Under Printing Features >> Borderless Printing > Select from Drop Down Menu "Print Borderless"
    Combine this with Print Preview / Margins
    The following might be helpful:
    Manage Print Output with Print Preview
    I hope this helps.
    Click the Kudos Thumbs-Up to say Thank You!
    And...Click Accept as Solution when my Answer provides a Fix or Workaround!
    I am pleased to provide assistance on behalf of HP. I do not work for HP. 
    Kind Regards,
    Dragon-Fur

  • My font in email is too small and spell ceck is too small and light to read. HELP Please.

    According to the Firfox help which I have tried everything suggested. I can get the font readable size by using the + sign - it does not always hold BUT the spell check is even smaller and so light it is impossible to read. This only happens with my Firefox Yahoo account. Any suggestions?

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    * http://kb.mozillazine.org/Zoom_text_of_web_pages
    You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
    * NoSquint - https://addons.mozilla.org/firefox/addon/nosquint/

  • HP Deskjet 3520 Prints too small and when trying to Scan it says can't find Computer..

      HP Deskjet 3520 ALL IN ONE & E-PRINTER I have had this printer about 1 year and have never got it to print out things(Some) where it can hardly be read. (I have to have a magnifyng glass to read some of it others fine. The kind I AM NOT ABLE to read are pre-printed materials.  The kind I AM ABLE to read adequately are things I type out on my Computer and then copy or print out it does fine..  Also when attempting to Scan a piece needed to Scan and printer set to Scan it said no Computer could be found. Can someone tell me how to fix these problems. This printer says 'ALL IN ONE e-Printer but it does not fax.

    Hi @mybeaugie 
    I see you are trying to make the font larger on your printed output, but the small text is only happening when you print from programs aside from documents you create. If you are using Internet Explorer you can use this document; Text is Small When Printing from Internet Explorer. If however, you are using AOL you can following these instructions from this post, 'how do i make the text larger'.
    As you can see modifying the text size is going to depend on the program you are using. If you are not using Internet Explore or AOL, can you please post back with more detail. What Browser are you using and what Operating system do you have?  Mac or Windows?
    I understand you are also getting a communication error when you try scanning.  Running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity:
    USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check: Checks for missing or corrupt driver files.
    Device Manager: Checks for problems in Device Manager that would prevent printing.
    Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match: Checks the port settings for the HP product.
    Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings: Checks and adjusts the print quality settings.
    Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests: Checks the scan mechanism, drivers, and registry entries.
    Source:Try the HP Print and Scan Doctor for Windows
    Click here to download and run the Print and Scan Doctor> www.hp.com/go/tools
    If that does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    If the scan issue persists, try the steps in the following document and let me know the outcome of your efforts; An 'An error occurred while communicating with scanning device' or a 'There is no computer connectio...
    Looking forward to hearing from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Print too small and does not fit page.

    Using windows XP and a Brother printer. Have tried several steps listed for solving this problem.
    In trying to reset firefox printer instruction , cannot locate the print.print_printer in the list to see if that will work. It is not there. How do I solve that problem?
    Changed scale and font size and still does not work to restore settings.
    Have version 21.0 installed on computer.

    If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
    #In order to check the margins, we need to go to ''File'' > ''Page Setup''.
    #Once this is done, switch to the ''Margins & Header/Footer'' tab.
    #Check what's set there under ''Margins''.
    The following are the default values for ''Margins'':
    '''Right''': 12.7
    '''Top''': 12.7
    '''Left''': 12.7
    '''Bottom''': 12.7
    Check these values accordingly and change them if necessary.

  • HP P1006 Prints too Small and cartride life is questionable as it's brand new!

    My parents just bought an HP P1006 and there are two issue..keep in mind I live across the country from them and they are not computer literate.
    Anyway, your help would be greatly appreciated:
    Printing is already fading and they hardly use it...no where near the 700 that comes with the installed cartridge
    Secondly, it prints very very small
    Any help out there?

    Try this for a Quick Fix ...........
    After reading other forum comments from people having the same problem with the yellow cartridge popping-out, combined with others who have realised that HP have no interest in compensating anyone for this rediculous example of, at best, 'bad design', or at worst 'blatent planned obsolescence', I have created a 'quick fix' that may add another 1, 2 or more years of life to the HP Officejet Pro L7580 Printer.
    This is not the elegant technical solution I was hoping for.  However, in hindsight, it may prove to be a more reliable solution than replacing the faulty part that is actually causing the problem.  So, here it is the Quick Fix ........
    I found a wooden triangular door stop that I cut to size that fitted exactly in the space between the plastic door and the offending yellow cartridge. To hold it in place, I wrapped the doorstop with 2" cellotape, then I stuck the door stop to the inside of the plastic door with double sided cellotape (double sided stick-on foam would also work well). With the doorstop in the correct place, the plastic door closed perfectly and was snug enough to apply sufficent pressure to the offending yellow cartridge, and hence stopping it from popping out again.  To make sure the plastic door does not 'fly open' with the pressure of the yellow cartridge (when it wants to pop out!), I applied another piece of 2" cellotape around the outside of the door, holding it to the body of the photocopier.
    This exercise only took 10-15 mins to do.  I feel this is a much better option than spending another $300+ on a new All-in-One  system, as well as being a good environmental solution.  If this is DELIBERATE 'planned obsolescence', companies like HP need to be more accountable for, at best, 'sloppy design'.  Any feedback would be appreciated.

  • Print too small, tried everything (I think..)

    Hi
    I recently installed the driver for this printer from the HP site and replaced some empty ink cartridges. So, printer now prints.
    Trouble is, whatever I do in Preferences, or in Word, Acrobat, anything, the page prints too small and centred. The setting in preferences is A4
    When I ask the printer to print the TEST pages, i.e the 'Self Test Diagnostic Page' and 'Print Quality Diagnositcs Page' they are both perfect and the correct size.
    I am using an older version of Mac OS (10.4.....) but not had trouble before.
    Any help/advice would be greatly appreciated. Many thanks.

    Hi @migrations 
    If I am not mistaken, you need to increase the font size within the program you are printing from. Be sure not to increase the zoom, the font size needs to be larger for the print size to be increased.
    You may also see a scale to option, or fit to page, in the print preview, this might help too.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Hi! I'm from Brazil and I'm having troubles with subtitles. Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

    Watching movies from iTunes and Netflix, the subtitles shows yellow, too small and into gray boxes! I'm having this kind of trouble with my iPad also.

    Solution found.
    I am a Vodafone customer and installed the Vodafone app which asks you to turn off wifi connection on installation as it needs to communicate with their servers over 3G.
    After restoring the iPad via iTunes this is the only app that I did nor re-install and seems to be too much of coincidence that while in full screen view watching films my wifi is switched off and 3G data connection is established 10 - 15 minutes into a fiilm and my data allowance gets eaten up!
    I would also get push notifications from Vodafone saying "my daily data usage was almost used" with this app installed.
    Have tested and on 3rd time watching sky go still wifi is on after 30 mins.
    DO NOT INSTALL VODAFONE APP FROM THE APP STORE.

  • Whenever I turn on my Apple TV, it get an error message that says Go to itunes store on your computer and get your password.

    Whenever I turn on my Apple TV, it get an error message that says "Have you forgot your password. You have attempted to log in too many times. Go to itunes store on your computer and get your password". I have logged into itunes store on my computer, but I don't know what to do next. I accessed my account on itunes store hoping that would give me a pasword or other useful information, but no help. What am I supposed to do?

    I was not complete clear.
    Since you never changed the settings in the advanced section of iTunes preferecnes, you have to chech that your music is really in the location setted in the folders reported in the advanced section.  If not you have 2 ways: reset the position of this folders or in the actual disk organisation or in the pointing on the preferences.
    If you press the reset button you just give to itunes its default setting as for the position of the music files: probably this will be a good choice if you have never changed any default preference.
    But before I would check the folders and see if the songs are really there
    In my iTune I have this, and I believe it is the default.
    Users/YOURHOMEFOLDERNAME/Music/iTunes/iTunes Music

  • Web printing too small

    Any web printing I do is too small and I don't know how to reset the size. This started with Tiger. Any help out there?

    reset

  • Print too small to read

    New HP Officejet J4580
    All in One
    Prints too small.  When I disable shrink to fit to after enlarging font, it cuts off text.
    How to print larger?

    I use a Compaq laptop computer, belong to Frontier.Com and TRY to print on C3180 All In One.  It was working fine, but now
    when I print emails, the printing font is SO SMALL I can bearly read it.  How do I increase this?
      I do NOT have this problem when printing something from Internet other than email.
     HP has not given me any help that works so far.

  • The toolbar displays File, Edit, View, etc. print too small & barely able to read. How to enlarge print. Also background color of toolbars hard to read. It is black. make larger?

    The Menu Bar, Roboform Bar in general all toolbars the print is too small and barely able to read. Please tell me how to enlarge the print. Also, the background color is black and hard to read. Thanks for any help you can give me.

    Use this extension to adjust the font size for the user interface:
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
    Increase the String pref layout.css.devPixelsPerPx from 1.0 to 2.0 in 0.1 or 0.05 steps to adjust the size of all fonts and other elements in Firefox.<br />
    In current Firefox versions this pref is a String value parsed to a float and allows to fine tune the dimensions of all elements (user interface and web pages) more precisely.
    *http://kb.mozillazine.org/about:config
    You can use an extension to set a default font size and page zoom on web pages if the above steps made the text too large.
    *Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/

  • ITunes Store Window too wide

    The iTunes window is too wide, and the columns too far apart. When I want to purchase a tune, I can't see the BUY icon from the song list, and if I move the screen to the right, I can't see which song I'm purchasing. I have to keep moving the screen back and forth to read an entire row in the iTunes store. This is going to drive me crazy...there must be a solution for this.

    There is actually a setting for this which I found and fixed. Now, I have the perfect screen all the time!

  • Anything printed with firefox prints too small

    anything printed with firefox prints too small. If I print and email it prints in the center top of the page and is just larger than a credit card. if I adjust the scale to 100% the it prints what could fit on one page onto 4 pages and prints a small portion in the center top of the page and is just larger than a credit card.

    Ok i think i fixed this issues.
    i went to about:config print.print_margin_bottom (and also left, right and top) and right clicked reset (it took out the previous 0.5 value). now the pages look normal on print preview without the large margin

  • Yosemite Apple Mail prints too small

    After Yosemite upgrade the body of text in Apple Mail messages prints extremely small. 2 Printers tested - HP Laserjet 5100tn and a Konica Minolta 5500 with a Fiery controller. Printing to a PDF file first is OK.
    This only seems to occur when I print messages that I've sent or when I print a message where someone has replied to a message that I sent previously. Only the body of the messages that I sent prints too small. The From, Subject, Date, To, My signature, and anything from messages that have been sent to me from someone else are all OK. In messages that were replies to me from messages that I sent to others, everything is OK except the body of the message that I originally sent to that individual.

    I have had this issue as well and have not really been able to resolve it. Yosemite Mail app doesn't seem to have the option that previous OS did where you could choose "Scale Message to Fit," "Rewrap Message to Fit," etc.
    Am I missing something here or did they disable this option?  I know I can change font or increase font size in preferences, but I don't really need to increase font size for display, only for printing, which seems to be very tiny no matter what I try to do.

Maybe you are looking for

  • IPod not working with headphones or input jack

    I guess I'm probably effed, but I dropped my iPod mini today, and now it only works thru my computer. not thru headphones or input jacks. I imagine I damaged my input device. Any ideas?

  • IView personalization is not opening

    Hi, I have an iview which is created from PDK component and it has the following parameters in portalapp.xml:         <property name="location" value="00084943"/>         <property name="user" value="ep"/>         <property name="status" value="valid

  • Current IBase Component is not in an active IBase

    Hello Everybody, I have a big problem. I am using a BAPI for create a Change Request on Solution Manager, this is the bapi BAPI_BUSPROCESSND_CREATEMULTI The parameters for IBase is 1 and the IBase Component is 3400. The Change Request is created, but

  • Will this kill my hard drive even further?

    Hi, My MacBook hung on me the other night and I heard clicking from inside it. I forced a shut down, but the machine would not reboot (other than to a blinking ? icon) which leads me to believe the hard drive is dud. If I have to, I will pay a drive

  • Uploading Flash Site

    Hello all, I have several questions and I would really appreciate any help that you may have.  First off, my main problem is that my company's website is loading slow and I'm not sure why.  All of my images are small file sizes, but I do have 4 scene