ITunes Streaming: connection to home theater using Airport Extreme & Expres

I'm hoping this problem is an easy system config fix...
I am trying to stream my iTunes library from my desktop in the office to my laptop in the living room. Easy 'nuff so far. I adjusted all the nec. settings on each & my desktop iTunes lib. shows up on my laptop iTunes. Plays fine through the laptop speakers.
Now the tricky part that I can't figure out:
The desktop has an Airport Extreme base station & I'm using an Airport Express as a signal booster in the living room.
The AP Express has a 1/4 jack to RCA left/right plugged in to it that is going to my home theater receiver.
How, or can, I get the Airport Express to send the signal out of it so I can listen to my library through the home speakers? All wirelessly of course. ; )
The goal is to listen & control my desktop iTunes lib through my laptop & have it play through my home theater.
dual 2Ghz G5 Mac OS X (10.4.9)

Figured it out... hadn't turned on AirTunes on the desktop iTunes/Prefs.
Merry Christmas to me early!

Similar Messages

Can't connect Canon MP560 wirelessly using Airport Extreme with MacBook Pro

My Canon MP560 is failing to connect to the access point. It recognizes the access point/network I would like to connect to but when I enter in my password it fails to connect and tells me to check access point settings. I used this exact same printer but different router in my old house and everything worked well! I'm thinking this is a Mac thing that I can't seem to figure out. I have the lastest Canon driver updates for Mac and use 10.6.8 software on my Macbook Pro.
This is how the printer instructs me on the panel.
a. Select Wireless LAN setup
b. Select Easy Settings
c. Select Access Point
d. Enter Password
e. Fails to connect..........
Please help.
Brice.

Hi Tesserax,
i have the same issue as mountie30 with the MP560 but it's not working
i have a airport express.
i was following your instructions:
''To get to this feature within the AirPort Utility, go to the utility's menu bar and first choose Base Station, and then, Add Wireless Clients...''
the problem is, base station is in light gray and i can't click on it.
i re-plugged my printer into my imac so it detects it again. (it still says printer offline in settings)
i have no clue what to do.
please help
thanks
Nath

Unable to Connect to the internet using airport extrteme

I am unable to connect to the internet using airport extreme It was working fine with my G3 & G4 iBooks but now I am unable to connect. I am able to connect directly to my Desktop connecting directly using ethernet. I am also receiving a strong signal from the airport base station. Please help. Thank you.

Try the following, in order, until resolved:
1. If the modem has a reset switch, use it to reset the modem. Wait at least 5-10 minutes for the modem to initialize.
2. Remove power from the modem. If it has a backup battery, remove this as well. Wait 5-10 minutes. Replace the battery, and add power back to the modem.
3. Perform a complete power recycle of your network components as follows:
Modem/Router Power Recycling - Quick
o Power-off the modem, AirPort Extreme Base Station (AEBS), & computer(s); Wait at least 5 minutes.
o Power-on the modem; Wait at least 5 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
If this fails to get the modem to "recognize" the Internet router, then try the "Full" version.
Modem/Router Power ReCycling - Full
o Power-off the modem, AEBS, & computer(s). (Wait at least 30 minutes. If possible, leave the modem off overnight.)
o Power-on the modem; Wait at least 15 minutes.
o Power-on the AEBS; Wait at least 5 minutes.
o Power-on the computer(s)
4. Contact your ISP to have them perform a "modem reset."

How to share files using airport extreme?

how can i share files between 2 computers connected to a wifi using airport extreme?

Suggest that you enable File Sharing on both computers. Assuming that you have Macs....
Open System Preferences (gear icon on the dock)
Open Sharing
Enter a check mark next to File Sharing
Do this on both Macs. Then you will be able to access files one one Mac from the other Mac
If you have an AirPort Extreme 802.11n, it is also possible to connect a hard drive to the USB port on the Extreme. Computers will be able to access files on this "shared" drive.

Connect a PC to My existing Wireless Network Using Airport Extreme

this is my issue i bought a Airport Express to connect a PC via ethernet to my wireless network already working at home. Cant figure out the settings???? need help. My home network is using a airport extreme base station. the problem is the PC doesn't have wireless capability so i connected the PC to the airport extreme in order to connect to the network, but no luck so far.

Hello Sailor25. Welcome to the Apple Discussions!
What you need to do is configure the AirPort Express Base Station (AX) as a ProxySTA.
To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

Using ARD remotely connecting to work computer with Airport Extreme...

So I've looked through the forums, over the interwebs, through the ARD PDF manuals online and I'm coming up short. Ugh.
I want to connect from my home laptop to my desktop at my small business where we're using an Airport Extreme for a router. I can NOT figure out how to get this configured to work. We use ARD within the business, so on the same network, no problems. With the router, I'm guessing I need to get the computer setup to have a locked in IP and whatnot but no where can I find the instructions that tell me EVERTHING I need to do. Can someone here point me in the right direction please or hit me over the head with a 2x4 of exact instructions!
Thanks for your time! Shawn

Hi Shawn,
So the steps listed bellow assume some things. They assume that the Airport Extreme Router your configuring is connected directly to the internet connection. And that the Airport Extreme is the only router between your computers and the internet.
That means we're talking about say a DSL modem plugged directly into the Airport Extreme, or a cable modem. in ether case, this assumes that said modem, is not acting as an internet router.
If your modem has multiple ethernet ports on it, or has a little antenna sticking out of it, then your modem is probable also a router, and these steps listed bellow will probable not work.
Also these steps are so one person, can connect to one computer at your work.
Open Airport Utility:
go to the dock
Click on the finder
go to the menu bar
Click on the "Go" menu
Chose "Utilities" from the "Go" Menu
double Click on "AirPort Utility"
Access the Base Station:
Double Click on your Airport Extreme BaseStation that is your internet connection router.
a new window should pop up with your Airport Base Station as the Window Name
Configure Static Address for the computer you want to connect to via ARD:
Click on the internet Icon from the toolbar
Click on the "DHCP" tab
For "DHCP Reservations:" Click on the "+" button
For the "Description" put "ARD"
For "Reserve Address by:" set "DHCP Client ID"
Click the "Continue" button
For "DHCP Client ID:" set "ARD"
write down the number in "IPv4" address field
Click the "Done" Button
Configure routing to ARD computer:
Click on the "Advanced" icon from the tool bar.
Click on the "Port Mapping" tab
Click on the "+" button
for "Service:" Chose "Apple Remote Desktop"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8)"
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Apple Events"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "+" button
For the pulldown menu "Service:" Chose "Remote Login - SSH"
for "Private IP Address:" copy the exact IP address you wrote down in step "3. 8."
Click the "Continue" button
Click the "Done" button
Click the "Update" button.
wait for the Airport Extreme to update, and for your computer to reconnect to the airport extreme. (make sure you can load and browse websites.)
Configure the ARD computer to use the correct IP address:
Go to the computer you want to be able to remotely connect to
On that computer, Go to the menu bar
Chose the "Apple" menu bar
Chose "System Preferences…"
Click on the "Show All" button
Click on the "Network" icon
For the active network connection, (the connection on the left side with the green dot), click on it
Clock on the "Advanced…" button
Click on the "TCP/IP" tab
for the "DHCP Cient ID: field put "ARD".
Click the "OK" button
Click the "Apply" buttonNOTE: Under "Status" you should see "(connection name) is connected to (airport base station name) and has the IP address (IP address)." the "(IP address)" address displayed should match the IP address you wrote down in step "3. 8."
Find out what your public internet IP address is.
On the computer you wish to connect to over the internet, goto http://whatismyipaddress.com/
when the web page loads, you should see "IP Information:" fallow by a number like 192.168.0.1, write down what ever number it is.
At this point you should be able to connect to the computer remotely
connect to the internet from another location.
open Apple Remote Desktop
go to the file menu
chose connect to computer using ip address
set the address to the address to the IP address you wrote down for step 6. 2.
use the same password as you used to connect to the computer at work using ARD.
So here the catch. If your router gets reset... well then your going to have to configure it again. Also all the same rules you have to connect to the computer at work, also apply to connecting to the computer from over the local network. That means your computer need to be on or sleeping. And if it's sleeping it need to be configure to wake for network access.
Also some network connections change. When it comes to internet connections, some connections are static IP, while other connections are DHCP. If your connection is static... great! if it's DHCP, your address may change. If it dose.. well then your ability to connect will break. And then you'd have to do step 6 & 7 again.
Of corse there are ways around this. But that's kind of another conversation.
Some internet locations may block your ability to connect to your computer at work. This is very common at schools, and companies. Basically any place that tries to control your ability to browse the internet, may block remote access to computers; because a remote computer would completely by pass their web filter.
ALSO there is an easier option. As far as setup. There are programs designed to make remotely accessing your mac as easy as possible. For instance there is LogMeIn or Slack. With both of these programs, it's simple. make sure your computer is always on. Then install the software. Create an account with the service. And then you can connect to the computer almost any where by going to their website.
This option requires no router configuration. It handles DHCP. It's designed to work in as many locations as possible.

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

If you have not already done so, your chances will really improve if you....
1) Connect the printer to the USB port on the AirPort Extreme
2) Download and install Bonjour Print Services for Windows on the PC

How can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

how can i sync ipad1/iphone4 with itunes wirelessly using airport extreme network

Hi,
This is currently not supported by iOS for any devices. Rumour is that iOS 5 will finally add this function, until then I'm afraid you are stuck with the good old cable.
Jamie

Why can't i connect to the internet using airport

I can't connect to the internet using Airport. I have to use a ethernet connection.

go to applications>utilities, and make sure your wireless is showing up in the left colum. If you see it there follow the promps to set it up

Re : Apple TV doesn't connect to a Wi-Fi Broadband Internet Service using Airport Extreme

Hi, using Airport Extreme (Airport Utility version 6.3.2, Internet :DHCP, Router mode : Off (Bridge)) with a Wi-Fi Broadband Internet service. My Desktop (iMac), Macbook,iPhone,iPad join the Airport Extreme Wirelessi network (WPA/WPA2 Personal) easily and Broadband ISP Login-page pops up with username & password options. However, in case of Apple TV (2nd Generation Software : 6.0.2 (6646.81.1)), it connects the Airport Extreme W-Fi network easily but no Broadband ISP Login-page pops up with username & password options. Even using the Ethernet connection of the said Wi-Fi Broadband Internet Service directly to the Apple TV, no internet network connects. Please help.

There is no way you can handle login details with the ATV and there is probably no way you can do it with extreme in router mode either.. If you need to use a login name and password via a html screen then that is impossible in a device without html.
But your newest addition confuses me.
A slight correction in the question : the Broadband Internet Service isn't Wireless, but having Ethernet connection to the Airport Extreme.
So how do your iphones pop up a login page.
easily and Broadband ISP Login-page pops up with username & password options.
The alternative method is to use a computer .. login to your service and use ICS through the computer to the ATV..
See http://www.youtube.com/watch?v=0jJe_BkQMRc
Or any site that shows how to route internet through a computer.

I am trying to connect to directv using airport extreme

I am having great difficulty connecting my directv wirelsss connection device to my apple airport extreme. the directv wireless device will not accept my security code. I had the directv technician over for 3 hours and we could not solve the problem. Help!!!

DirecTV wireless capabilities are quite limited for a modern product
Make sure that the name of your AirPort Extreme wireless network contains no apostrophes, exclamation marks, asterisks, dollar signs, etc. Use only regular lettters and numbers.
For example, if the name of your wireless network is
kikuum's wireless network
DirecTV will never be able to connect. Change the name to something with only letters and numbers, no spaces, and no more than 20 characters. So, for example you could use something like
kikuumwireless
You may also need to lower the security setting on your AirPort Extreme router from the default WPA2 Personal to WPA/WPA2 Personal
Open AirPort Utility, click on the AirPort Extreme icon and click Edit
Then click on the Wireless tab at the top of the window to access the settings page
Click Update at the lower right to save your new settings

Where did button go for new itunes to connect speakers/ dvd player through airport?

where did button go for new itunes to connect speakers/ dvd player through airport?

I realize this question is ubiquitous in this forum....I guess I'm specifically interested in knowing WHY won't the Extreme software recognize the Express unit?

Slow wireless internet connection using airport extreme

My wireless internet connection works but is very slow (<80kbs). The problem seems to be with the airport extreme (brand new, purchased in May 07) because my connection is very fast (>6mbs) when i connect by wire to the airport extreme base station. Signal strength is strong, so i can't figure out the problem. Any ideas?
imac Mac OS X (10.4)

BK37, I hope you've solved your problem by now. But if not, and for the benefit of others reading this post, let me share what I (finally) discovered when I had virtually the same problem, i.e. 8mbps wired speed, <50kbps wireless speed.
I tried literally <span style="font-style:italic;">every suggestion I could find in the Airport discussions. First, I can assure you that changing the channel can give you incremental speed improvements in some instances, but for radical drops like yours, it's not the answer. Nor is turning off ipv6, or changing to WEP, or turning off Remote Access, or moving the AEBS, or or or or or....
With such a radical drop in speed, it's most likely you have a hardware-related blockage somewhere. In my case it was my wiring configuration. My setup was France Telecom Livebox (ADSL modem / ethernet & 802.11g router) --> Ethernet cable --> Linksys RTP 3100 IP phone adapter / router --> Ethernet cable --> AEBS --> 3 Airport Express set up to extend network and run AirTunes. After eliminating every other possible problem, I narrowed it down to the Linksys router, which for reasons I have yet to figure out was trapping the speed to the AEBS. I ethernet cabled both the Linksys router and the AEBS directly to the Livebox and presto! Back to blazing speed.
Hopefully this info will be helpful to you or some poor soul in the same situation, as I would have loved to have had it myself before I pulled every hair out of my head!
iMac 21" Intel Mac OS X (10.4.9)

HT4199 libratone live set up using airport extreme

The instructions for setting up the Libratone live speakers to the router, asks that you press the WPS button but there is no WPS button on the Aiport Extreme. Therefore does anyone know how I set up the Libratone speaker using Airport Extreme?

It would be neat though, to be able to connect
wirelessly on my Dell WinXP laptop over this dial-up
connection at home, the few times I'm going to use
it. So I thought eBaying one of those nice "old"
hockey puck Airport Extremes with built-in 56k
modem.
That should work.
From what I understood, the AE doesn't have a
web-based configuration interface, like most
broadband routers have, but one needs to configure it
installing a software utility, right?
Correct
Being in a
Windows only environment, will I be able to configure
my Airport Extreme-to-be using the Windows software
on
<http://docs.info.apple.com/article.html?artnum=75422>
Yes.
http://www.apple.com/support/downloads/airport42forwindows.html
? Does anyone of you have any experience with this?
Yes
If so, could you reassure me that this is actually a
feasible idea?
Yes if does work.
Does the AE dial-in automatically whenever you're
generating traffic, by the way, or do you still have
to establish the connection manually?
You can configure it that way, but it is easier to use Jon Sevy's Java utility.
Jon Sevy has a Java Utility for this purpose.
You will need Java in order to run the utility

Streaming netflix through apple tv using airpot extreme.

I am having trouble streaming netflix through my apple tv using airport extreme router. How can I fix this problem?

What kind of problems?
Accessing Netflix from AppleTV or Airplaying Mirroring via iPad (which would be pointless as it's available on AppleTV direct even if it worked)?
Does other stuff like movie rentals, iTunes previews work ok?
AC

ITunes Streaming: connection to home theater using Airport Extreme & Expres

Similar Messages

Maybe you are looking for