Itunes sync "app name" faild to install

i am attemting installation error itunes sync 'appname' failed to intall when i install .ipa file on my device but it work fine on my simulator its uses dynamic contents whose come from remote server when my apps is start is there on archive time it take any permisson to get connect the remots server at installation time
thanks

Recreate your Mobile provisioning files. Make sure that while creating the MP files, you have not enabled for iclould and have checked your device to be included in the Mobile provisioning file.

Similar Messages

Itunes sync app name failed to install

I am having problems with installing an app with an ipa onto my iphone 4s. Whenever I drag the ipa into itunes and hit sync, my iphone has a message that says itunes sync <appname> failed to install. The app appears on my phone is half way finished installing and then this error pops up. please help.

Recreate your Mobile provisioning files. Make sure that while creating the MP files, you have not enabled for iclould and have checked your device to be included in the Mobile provisioning file.

When i try to transfer apps from itunes to my iphone 4s it comes Itunes sync "app name " failed to instal plaese help

I tried tried and tried but it didn't come , pls help

How is your iPod configured to sync music? In other words, what options and configurations do you have enabled from under your iPod's Summary and Music tabs in iTunes?
Maybe have a look at this article as well to verify your iPod is set up for syncing music.
iTunes: Syncing media content to iOS devices and iPod
B-rock

ITunes Sync app name here failed to install

Hi! I've recently updated to iOS 5 (well, by recently I mean 5 hours ago) and I've encountered issues not fatal but has a big impact on my part.
I encountered this error message when my iPod's restoring:
iTunes Sync <app name here> failed to install
A number of apps weren't successfully installed. I tried restoring for a number of times but the results were the same.
Though, I tried downloading the app via the Appstore on my iPod and it worked. The app was successfully installed and can be ran again.
So then, I tried transferring the purchase to my library to copy the IPA to my PC. Then removed the app from my iPod. Then tried to install again the app from iTunes (this time, I'm trying to use the IPA I downloaded via my iPod; the one that finally worked). But to no avail. The IPA that's working on my iPod didn't install successfully from iTunes.
Can you advise on how to fix this. As much as possible, I'm trying to keep all my downloads via iTunes but this incident is not allowing me to.
If you need more details, below is the list of the apps that aren't being successfully installed via iTunes: (all IPA's are up to date as of Oct. 14, 2011)
- Battleheart
- Castle Empire
- Death Rally
- Infinity Blade
- Chaos Rings
- Dead Space
- Dungeon Hunter 2
- Merriam-Webster Dictionary
- Words With Friends
- N.O.V.A. 2
I'm using iTunes 10.5 / iOS 5. My device is an iPod touch 4th gen black 32 GB

I am having the same or similar problem, wrote a simple program with xcode and it runs and loads to the iPad but when I creat the .ipa and pass it to iTunes it transfer to iPad. When transferring to iPad I get "iTunes Sync 'app name here' Failed to install. Sent to Apple as Bug # 11060939. Apple has had me update all, which I did and run thru it again and have the same results.
At this point I am wondering if it could be a setting in xcode which is also at the current level.

ITunes Synx "app name" failed to install

So i get this error when i am trying to sync my apps from my pc to ipod. Ipod iOS is 5.0.1 (9A405) iTunes version is latest..Some1 plz help me..

Is that the exact wording of the error message? What is Synx?
In the future, it is better to respond to your previous unanswered post to bump it up rather than starting a new post.

Before i updated to ios6 i took off all my apps into iTunes and then when i went to put them back in on my ipod it says " 'app name' failed to install" anyone know whats wrong?

before i updated to ios6 i took off all my apps and put them into iTunes and then when i went to put them back in it says syncing like normal then when i look on my ipod it says " 'app name' failed to install" anyone know whats wrong?

In iTUnes 7....
Connect the ipod. On the ipod summery page hit the "Music" tab. Set it to "Auto update select" and check the playlist you want on the ipod then hit "Apply" in the bottom righthand corner

"App Name" failed to Install message

I had an App which needed to be updated.. I made all the changes and created an IPA file via DPS App Builder. But when I try to load it to my iPad via ITunes I get a message "App Name" failed to Install.
I tired to recreate the certificates and provisioning files and tried again, still get the same message. I had no problems with the origianl App.
Any help or suggestions are greatly appreciated as this is now becoming urgent!
Thank.

Check your folio resolution. It should be 1024x786, 2048x1536.
Recreate certificates from scratch with new app ID (Do not use "*" in App ID e.g com.company.*). Make sure that you have unchecked iCloud in App ID section.
Provision your devices (Add device UDID and device name in Devices section).
Recreate App with new certificates.
Delete the old syncd app in iPad.
Sync new .ipa
Install
Also test your app in content viewer. There may be a chances that the app is not valid if you are unable to test it on content viewer also.

Itunes sync- fifa 13 failed to install

i have ipad 2 GSM jailed (6.1.3) i have downloaded FIFA 13 (latest version) in my computer, but when i sync FIFA 13, this message pop-up during the installation process on ipad "itunes sync- FIFA 13 failed to install" other apps installs successfully..... iv also used programs like ifunbox,itool to install FIFA 13 but still it doesn't install...i hav also installed the same FIFA 13 in my ipod touch 4g...it installs successfully and it is working, it only doesn't work on my ipad

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here.

Can't stop iTunes syncing apps

I've moved from a 64GB iPad to a 16GB iPad and so only want to sync a subset of the old apps. I deselect the apps im itunes, apply the changes, but every time I sync the new iPad itreverts to the previous settings and reinstalls the same apps. There isn't space to completely install them but they fill the space I want for other apps

Right, the buttons are labeled with what you want to do. So, if it says "Will Remove" don't click on it. By doing that , you are basically toggling the switch from whatever it says to the next option. "Will Remove" will remove it from the iPad by preventing it from trying to sync with the iPad. So, you want to get the button to say "Will Remove" on all of the apps that you don't want syncing to your iPad.
If it says "Install" that means "click on this button if you want to install". If you don't want to install, then don't click on it.
So, here's what the buttons mean and do:
Install: means an app that is on your computer or in iCloud but which is not installed on the device you have hooked to the computer right now. If you don't want that app on the device, leave the button on "install".
Will Install: is telling you that this app is not on your device right now, but when you sync again, it will install it.
So, Install and Will Install are a toggle switch for apps that are not currently installed on your iPad. One is saying that it is available to "Install", and the other is saying that you have elected to install the app, and it "Will Install" it on the next sync.
Remove: means that an app is installed on your iPad, and you have the option to remove it by clicking the "Remove" button.
Will Remove: means that you have clicked on the Remove button because you want to remove that app from your iPad.
So, Remove and Will Remove are a toggle switch for apps that are currently installed on your iPad.
If the only options you have are "Install", "Will Install", and "Will Remove", then you want the button to say Install on any app that you don't want sync'd. Then sync the iPad. That should prevent any of those apps from attempting to install again.
Cheers,
GB

ITunes' "Sync Apps" and iPad do not match.

Trying to figure out what my options are here (and what might have happened to cause this)...
Currently, the "Sync Apps" box under the Apps tab in iTunes is unchecked. The image displayed of the iPad reflects the correct number and placement of apps on my iPad.
Checking "Sync Apps" changed to a much-reduced set of apps, with placement that is WAY off.
While I'm interested in what might have caused this, what I'm more interested in is figuring out how to get the two in sync. I can't run the risk of losing data on the iPad and, if possible, I'd prefer not to select apps one-by-one in iTunes (there are about 100 I need to sync). Any thoughts?

Please, show this:
- https://discussions.apple.com/thread/6037934
- https://discussions.apple.com/thread/5943168?tstart=0

How do I stop iTunes syncing apps to iPhone?

I only ever use iTunes to sync audiobooks to my iPhone. I don't (or very rarely, usually at new device time) use it for backups or transferring music. All I want iTunes to sync to my device are the audiobooks I select. Why then does it insist on rearranging all my apps to a predefined layout from inside iTunes and putting BACK apps I deleted months ago?
I know this question has been asked before, but not for a while. Apparently I can go down my list of apps and select "Remove" or "Will Remove" etc but there used to be a check box for "sync apps". Why did Apple feel it was a good idea to remove this? I am sick to death of adding a new book to my phone then having to go and delete unwanted apps from the device - again - and rearrange the order back to how I want it. I should not have to do all this in iTunes before syncing. One button "do no sync apps" is all I want.
Am I missing something obvious or does Apple really believe that iTunes should override my preferred layout with one that it feels is right?

What happens if instead of using the sync button you just manually drag and drop your audiobooks onto your iPhone>Books in the Devices list.
Obviously you would have to have the Sidebar open to do this.

Itunes store app is empty after instaling IOS 7

after instaling IOS 7 the itunes store app is empty. Allready tried reseting and worked once but after reinitiating the app all blak again...

Just had the same problem hasn't worked since I updated. Tried resetting, and tried changing the saved cookies from always to just third party and STILL didn't work. However checked my pop up blocker which was on and turned it off just to see if it would work and it did... Not sure if this will work for anyone else but it's another thing to try! Go into settings-safari and it should be there. Hope this helps!

Another "itunes Sync *app* Failed to install" thread

Hi,
I am having some major provisioning problems, and i dont want to hijack the other thread.
My Macbook Air crashed after trying to install a thunderbolt driver in July and i lost my dev environment.
I reinstalled OS, downloaded my sources and i can debug the SW in the emulator.
But i can no longer get it to install on any device. I have tried both a iphone 4 and an ipad 3.
environment:
osx 10.8
Air 3.4b2
xcode 4.4.1
IOS 5.1.1
IOS language:Swedish
After reading the forum and pretty much half of the internet today I have tried the following.
1. I revoke all certs in apple developer portal
2. i remove all mobile provisioning files
3. I export a cert request from Keychain access. ( Shall i export a special Key?, I export without having chosen a specific key in Keychain access)
4. I use the certsigningrequest to create a new development cert.
5. I download the new cert, doubleclick it and export a .p12 file by chosing Keys-><my name>->privatekey->export.
6. I create a new mobile provisioning profile file in the portal chosing my full Appid 5625GW2MUW.com.elsheep.parken.MobileClient.
7. I download this file, and drag it to itunes.
8. i compile my .ipa using the exported .p21 file and the dev provisioning file.9. i install the .ipa in itunes by doubleclicking on it.
10. I synk the file onto my ipad.
and it bombs.
Should i be able to install a file with development cert/profile, or do i need to use an ad hoc one ( I have tried this and i get the same fault.)
xcode clains that the provisioning pofile is valid
Using iphone configuration utility i can see this in the ipad log:
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 verify_signer_identity: Could not copy validate signature: -402620393
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 preflight_application_install: Could not verify executable at /var/tmp/install_staging.izD4mc/foo_extracted/Payload/Parken.app
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 install_application: Could not preflight application install
Aug 16 22:07:50 unknown com.apple.itunesstored[746] <Notice>: MobileInstallationInstall: failed with -1
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Aug 16 22:07:50 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: device bootloaded
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: detection mode: 0->0
Aug 16 22:07:51 unknown kernel[0] <Debug>: set_crc_notification_state 0
This is truly driving me crazy.
Does anyone have any good ideas? the .ipa is quite large, 123 MB as I have included a lot of assets ( it is an art/photo app). COuld this be a part of the problem?
regards,
/Lars

Hi,
I am using Flash Builder, so that should be ok.
I have now succesfully build and deployed another app using the same .p12 file and a mobileprovisioning file based on the same certificate.
I will try to remove the assets from the IPA to see if it might be a size issue, as that is the major difference from the last version I had that worked before the crash.
/Lars

Itunes Sync *app* Failed to install

So I have been trying to troubleshoot this issue for about a week. I have tried everything I can think of, but I cant seem to find a way to get the app I made to load onto my iPad. Is there some sort of foolproof procedure I can follow? I have been using this site http://www.lynda.com/Flash-Professional-CS5-5-tutorials/Building-Mobile-Apps-for-Multiple- Devices-with-Flash-Professional/89049-2.html but I still am not able to get it to install. Any suggestions/help would be greatly appreciated!!

Sorry about the wait guys, I am currently deleting every old certificate, device, and everything else. I decided to start from scratch so that you guys will be able to tell me what I may be doing wrong.
Step by step, here is what I have done so far.
I went into my provisioning portal and got rid of everything, So I am starting fresh.
1. Generated a certificate signing request using the keychain access
     -oscp and clr set to off
     -requested a certificate from a certificate authority
     -saved to desktop
2. Took the CSR file and went into the certificates tab of provisioning portal
     -clicked request certificate in the development tab
     -on the Create iOS development certificate screen, I found my CSR and selected it
     -I then clicked submit and refreshed the Certificate page so that it is approved
     -Downloaded the developer certificate and saved it to my desktop
3. Opened up the keychain access and went to File | Import
     -Took the new .CER file which is the developer certificate and imported it
     -Right clicked the newly added PRIVATE key in the keychain access and clicked Export
     -Saved the Exported file to the desktop, the file is a P12
     -Gave the P12 a password while saving, verified with admin priveledges.
4. Went back to the provisionong portal and went to the Devices tab
     -Clicked Add device in the Devices tab
     -Connected testing device in iTunes and copied the UDID
     -Gave the device a name and pasted the UDID into the device UDID box
     -Clicked submit at the bottom of the page to register the device
5. Went to the App ID Tab of the provisioning portal
     -Clicked the Manage tab and clicked New App ID
     -On the Create App ID page, entered "General Development" into the Description field
     -Entered "*" into the Bundle Identifier to create a wildcard App ID
6. Went to the Development tab in the Provisioning Profile
     -Clicked on New Profile under Development Provisioning Profiles
     -On the Create iOS Development Provisioning Profile page, entered my name i the Profile Name field
     -Checked the appropriate checkbox for my Development Certificate
     -Selected the "General Development" App ID from the dropdown
     -Checked the box next to the Device Name I recently added
     -Clicked the Submit button, Refreshed the page so it was active
     -Downloaded the Development Provisioning Profile onto my Desktop
And THAT is where I am now. Before I go any further, can I get some feedback on those steps? Did I miss any? Was there a preference I should have selected that I didnt?
Thank you very much for taking the time to read all that, Its quite a bit!

Error 'iTunes sync Overkill 2 has failed to install'!

Hi, i have recently downloaded Overkill 2 game through itunes. When i synced my iphone, it give error 'iTunes sync Overkill 2 has failed to install'. Can anybody tell me the solution for this?

I am having the same or similar problem, wrote a simple program with xcode and it runs and loads to the iPad but when I creat the .ipa and pass it to iTunes it transfer to iPad. When transferring to iPad I get "iTunes Sync 'app name here' Failed to install. Sent to Apple as Bug # 11060939. Apple has had me update all, which I did and run thru it again and have the same results.
At this point I am wondering if it could be a setting in xcode which is also at the current level.

Itunes sync "app name" faild to install

Similar Messages

Maybe you are looking for