ITunes Sync app name here failed to install

Hi! I've recently updated to iOS 5 (well, by recently I mean 5 hours ago) and I've encountered issues not fatal but has a big impact on my part.
I encountered this error message when my iPod's restoring:
iTunes Sync <app name here> failed to install
A number of apps weren't successfully installed. I tried restoring for a number of times but the results were the same.
Though, I tried downloading the app via the Appstore on my iPod and it worked. The app was successfully installed and can be ran again.
So then, I tried transferring the purchase to my library to copy the IPA to my PC. Then removed the app from my iPod. Then tried to install again the app from iTunes (this time, I'm trying to use the IPA I downloaded via my iPod; the one that finally worked). But to no avail. The IPA that's working on my iPod didn't install successfully from iTunes.
Can you advise on how to fix this. As much as possible, I'm trying to keep all my downloads via iTunes but this incident is not allowing me to.
If you need more details, below is the list of the apps that aren't being successfully installed via iTunes: (all IPA's are up to date as of Oct. 14, 2011)
- Battleheart
- Castle Empire
- Death Rally
- Infinity Blade
- Chaos Rings
- Dead Space
- Dungeon Hunter 2
- Merriam-Webster Dictionary
- Words With Friends
- N.O.V.A. 2
I'm using iTunes 10.5 / iOS 5. My device is an iPod touch 4th gen black 32 GB

I am having the same or similar problem, wrote a simple program with xcode and it runs and loads to the iPad but when I creat the .ipa and pass it to iTunes it transfer to iPad. When transferring to iPad I get "iTunes Sync 'app name here' Failed to install. Sent to Apple as Bug # 11060939. Apple has had me update all, which I did and run thru it again and have the same results.
At this point I am wondering if it could be a setting in xcode which is also at the current level.

Similar Messages

Error 'iTunes sync Overkill 2 has failed to install'!

Hi, i have recently downloaded Overkill 2 game through itunes. When i synced my iphone, it give error 'iTunes sync Overkill 2 has failed to install'. Can anybody tell me the solution for this?

I am having the same or similar problem, wrote a simple program with xcode and it runs and loads to the iPad but when I creat the .ipa and pass it to iTunes it transfer to iPad. When transferring to iPad I get "iTunes Sync 'app name here' Failed to install. Sent to Apple as Bug # 11060939. Apple has had me update all, which I did and run thru it again and have the same results.
At this point I am wondering if it could be a setting in xcode which is also at the current level.

Itunes sync app name failed to install

I am having problems with installing an app with an ipa onto my iphone 4s. Whenever I drag the ipa into itunes and hit sync, my iphone has a message that says itunes sync <appname> failed to install. The app appears on my phone is half way finished installing and then this error pops up. please help.

Recreate your Mobile provisioning files. Make sure that while creating the MP files, you have not enabled for iclould and have checked your device to be included in the Mobile provisioning file.

When i try to transfer apps from itunes to my iphone 4s it comes Itunes sync "app name " failed to instal plaese help

I tried tried and tried but it didn't come , pls help

How is your iPod configured to sync music? In other words, what options and configurations do you have enabled from under your iPod's Summary and Music tabs in iTunes?
Maybe have a look at this article as well to verify your iPod is set up for syncing music.
iTunes: Syncing media content to iOS devices and iPod
B-rock

Itunes sync "app name" faild to install

i am attemting installation error itunes sync 'appname' failed to intall when i install .ipa file on my device but it work fine on my simulator its uses dynamic contents whose come from remote server when my apps is start is there on archive time it take any permisson to get connect the remots server at installation time
thanks

Recreate your Mobile provisioning files. Make sure that while creating the MP files, you have not enabled for iclould and have checked your device to be included in the Mobile provisioning file.

Can't stop iTunes syncing apps

I've moved from a 64GB iPad to a 16GB iPad and so only want to sync a subset of the old apps. I deselect the apps im itunes, apply the changes, but every time I sync the new iPad itreverts to the previous settings and reinstalls the same apps. There isn't space to completely install them but they fill the space I want for other apps

Right, the buttons are labeled with what you want to do. So, if it says "Will Remove" don't click on it. By doing that , you are basically toggling the switch from whatever it says to the next option. "Will Remove" will remove it from the iPad by preventing it from trying to sync with the iPad. So, you want to get the button to say "Will Remove" on all of the apps that you don't want syncing to your iPad.
If it says "Install" that means "click on this button if you want to install". If you don't want to install, then don't click on it.
So, here's what the buttons mean and do:
Install: means an app that is on your computer or in iCloud but which is not installed on the device you have hooked to the computer right now. If you don't want that app on the device, leave the button on "install".
Will Install: is telling you that this app is not on your device right now, but when you sync again, it will install it.
So, Install and Will Install are a toggle switch for apps that are not currently installed on your iPad. One is saying that it is available to "Install", and the other is saying that you have elected to install the app, and it "Will Install" it on the next sync.
Remove: means that an app is installed on your iPad, and you have the option to remove it by clicking the "Remove" button.
Will Remove: means that you have clicked on the Remove button because you want to remove that app from your iPad.
So, Remove and Will Remove are a toggle switch for apps that are currently installed on your iPad.
If the only options you have are "Install", "Will Install", and "Will Remove", then you want the button to say Install on any app that you don't want sync'd. Then sync the iPad. That should prevent any of those apps from attempting to install again.
Cheers,
GB

ITunes' "Sync Apps" and iPad do not match.

Trying to figure out what my options are here (and what might have happened to cause this)...
Currently, the "Sync Apps" box under the Apps tab in iTunes is unchecked. The image displayed of the iPad reflects the correct number and placement of apps on my iPad.
Checking "Sync Apps" changed to a much-reduced set of apps, with placement that is WAY off.
While I'm interested in what might have caused this, what I'm more interested in is figuring out how to get the two in sync. I can't run the risk of losing data on the iPad and, if possible, I'd prefer not to select apps one-by-one in iTunes (there are about 100 I need to sync). Any thoughts?

Please, show this:
- https://discussions.apple.com/thread/6037934
- https://discussions.apple.com/thread/5943168?tstart=0

How do I stop iTunes syncing apps to iPhone?

I only ever use iTunes to sync audiobooks to my iPhone. I don't (or very rarely, usually at new device time) use it for backups or transferring music. All I want iTunes to sync to my device are the audiobooks I select. Why then does it insist on rearranging all my apps to a predefined layout from inside iTunes and putting BACK apps I deleted months ago?
I know this question has been asked before, but not for a while. Apparently I can go down my list of apps and select "Remove" or "Will Remove" etc but there used to be a check box for "sync apps". Why did Apple feel it was a good idea to remove this? I am sick to death of adding a new book to my phone then having to go and delete unwanted apps from the device - again - and rearrange the order back to how I want it. I should not have to do all this in iTunes before syncing. One button "do no sync apps" is all I want.
Am I missing something obvious or does Apple really believe that iTunes should override my preferred layout with one that it feels is right?

What happens if instead of using the sync button you just manually drag and drop your audiobooks onto your iPhone>Books in the Devices list.
Obviously you would have to have the Sidebar open to do this.

Another "itunes Sync *app* Failed to install" thread

Hi,
I am having some major provisioning problems, and i dont want to hijack the other thread.
My Macbook Air crashed after trying to install a thunderbolt driver in July and i lost my dev environment.
I reinstalled OS, downloaded my sources and i can debug the SW in the emulator.
But i can no longer get it to install on any device. I have tried both a iphone 4 and an ipad 3.
environment:
osx 10.8
Air 3.4b2
xcode 4.4.1
IOS 5.1.1
IOS language:Swedish
After reading the forum and pretty much half of the internet today I have tried the following.
1. I revoke all certs in apple developer portal
2. i remove all mobile provisioning files
3. I export a cert request from Keychain access. ( Shall i export a special Key?, I export without having chosen a specific key in Keychain access)
4. I use the certsigningrequest to create a new development cert.
5. I download the new cert, doubleclick it and export a .p12 file by chosing Keys-><my name>->privatekey->export.
6. I create a new mobile provisioning profile file in the portal chosing my full Appid 5625GW2MUW.com.elsheep.parken.MobileClient.
7. I download this file, and drag it to itunes.
8. i compile my .ipa using the exported .p21 file and the dev provisioning file.9. i install the .ipa in itunes by doubleclicking on it.
10. I synk the file onto my ipad.
and it bombs.
Should i be able to install a file with development cert/profile, or do i need to use an ad hoc one ( I have tried this and i get the same fault.)
xcode clains that the provisioning pofile is valid
Using iphone configuration utility i can see this in the ipad log:
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 verify_signer_identity: Could not copy validate signature: -402620393
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 preflight_application_install: Could not verify executable at /var/tmp/install_staging.izD4mc/foo_extracted/Payload/Parken.app
Aug 16 22:07:50 unknown installd[733] <Error>: 00485000 install_application: Could not preflight application install
Aug 16 22:07:50 unknown com.apple.itunesstored[746] <Notice>: MobileInstallationInstall: failed with -1
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: Posting 'com.apple.iokit.hid.displayStatus' notifyState=1
Aug 16 22:07:50 unknown UserEventAgent[12] <Warning>: DEBUG: Changing screen blanked state: 0
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: detection mode: 255->0 (deferring until bootloaded)
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: device bootloaded
Aug 16 22:07:50 unknown SpringBoard[23] <Notice>: MultitouchHID: detection mode: 0->0
Aug 16 22:07:51 unknown kernel[0] <Debug>: set_crc_notification_state 0
This is truly driving me crazy.
Does anyone have any good ideas? the .ipa is quite large, 123 MB as I have included a lot of assets ( it is an art/photo app). COuld this be a part of the problem?
regards,
/Lars

Hi,
I am using Flash Builder, so that should be ok.
I have now succesfully build and deployed another app using the same .p12 file and a mobileprovisioning file based on the same certificate.
I will try to remove the assets from the IPA to see if it might be a size issue, as that is the major difference from the last version I had that worked before the crash.
/Lars

Itunes Sync *app* Failed to install

So I have been trying to troubleshoot this issue for about a week. I have tried everything I can think of, but I cant seem to find a way to get the app I made to load onto my iPad. Is there some sort of foolproof procedure I can follow? I have been using this site http://www.lynda.com/Flash-Professional-CS5-5-tutorials/Building-Mobile-Apps-for-Multiple- Devices-with-Flash-Professional/89049-2.html but I still am not able to get it to install. Any suggestions/help would be greatly appreciated!!

Sorry about the wait guys, I am currently deleting every old certificate, device, and everything else. I decided to start from scratch so that you guys will be able to tell me what I may be doing wrong.
Step by step, here is what I have done so far.
I went into my provisioning portal and got rid of everything, So I am starting fresh.
1. Generated a certificate signing request using the keychain access
     -oscp and clr set to off
     -requested a certificate from a certificate authority
     -saved to desktop
2. Took the CSR file and went into the certificates tab of provisioning portal
     -clicked request certificate in the development tab
     -on the Create iOS development certificate screen, I found my CSR and selected it
     -I then clicked submit and refreshed the Certificate page so that it is approved
     -Downloaded the developer certificate and saved it to my desktop
3. Opened up the keychain access and went to File | Import
     -Took the new .CER file which is the developer certificate and imported it
     -Right clicked the newly added PRIVATE key in the keychain access and clicked Export
     -Saved the Exported file to the desktop, the file is a P12
     -Gave the P12 a password while saving, verified with admin priveledges.
4. Went back to the provisionong portal and went to the Devices tab
     -Clicked Add device in the Devices tab
     -Connected testing device in iTunes and copied the UDID
     -Gave the device a name and pasted the UDID into the device UDID box
     -Clicked submit at the bottom of the page to register the device
5. Went to the App ID Tab of the provisioning portal
     -Clicked the Manage tab and clicked New App ID
     -On the Create App ID page, entered "General Development" into the Description field
     -Entered "*" into the Bundle Identifier to create a wildcard App ID
6. Went to the Development tab in the Provisioning Profile
     -Clicked on New Profile under Development Provisioning Profiles
     -On the Create iOS Development Provisioning Profile page, entered my name i the Profile Name field
     -Checked the appropriate checkbox for my Development Certificate
     -Selected the "General Development" App ID from the dropdown
     -Checked the box next to the Device Name I recently added
     -Clicked the Submit button, Refreshed the page so it was active
     -Downloaded the Development Provisioning Profile onto my Desktop
And THAT is where I am now. Before I go any further, can I get some feedback on those steps? Did I miss any? Was there a preference I should have selected that I didnt?
Thank you very much for taking the time to read all that, Its quite a bit!

ITunes Synx "app name" failed to install

So i get this error when i am trying to sync my apps from my pc to ipod. Ipod iOS is 5.0.1 (9A405) iTunes version is latest..Some1 plz help me..

Is that the exact wording of the error message? What is Synx?
In the future, it is better to respond to your previous unanswered post to bump it up rather than starting a new post.

Had to reset Ipad to factory settings, now Ipad won't sync to Itunes and apps that aren't factory installed will not open. Is there anything I can do?

Hi,
I hope someone can help. There was something wrong with my Ipad so I had to reset it back to the factory settings. Now the Ipad won't sync to Itunes and only factory installed apps will open. Does this mean that this Ipad is DOA and it is time for a new one? Or is there anything else I can do? It is a 1st generation Ipad.
Thanks for the help in advance.

if all that does not work you can always try to do a recovery mode restore back to factory settings and then set it up as a new device then try to redownlaod every thing again
downlaod past purchases
http://support.apple.com/kb/HT2519
recovery mode
http://support.apple.com/kb/HT1808

ITunes 10.5.3 update failes to install

Window 7 64-bit currently running iTunes10.5.2.11
Every time i try and run the update for iTunes 10.5.3.3 x64 installer, it goes so far as to ask where to install (yes I ran the download manually after the automatic update failed a few times).
Each time it failes almost immeadiately with the error:
"The installer encountered errors before iTunes could be configured.
Errors occured during installation. Your system has not been modified.
Please run the installer again, or click Finish to exit."
I noticed a few things.
a) The version number in about iTunes does not show the x64 after it like the splash screen for 10.5.3
b) My iTunes is installed in Program Files (x86) which is where 32 bit versions generally get installed.
So do I currently have the 32 bit version installed and the auto installer is tring to update it to the 64 bit and that is why it fails?
I've tried run the install to Program Files instead of Program Files (x86). Fails just the same. Do I need to uninstall iTunes and reinstall to get the update to work?
Or is the 10.5.3 install just borked?

Try downloading the package for new installs. the update package failed, but the new install package worked for me without any trouble.
History:
I began this trouble shooting exercise by selecting Download Only through the Apple Update applet. Running the msi manually did not resolve the problem. In fact, it was more frustrating because the download package would disappear after running even though it failed, and I had to download it again. "Cleanup" I suppose. <frown>
I followed advice to remove the Apple Software Update program, reboot and re-run the msi. That did not resolve the failure.
I then followed advice to set permissions for Administrators on registry key HKLM\Software\Micorosoft\Windows\CurrentVersion\Installer\UserData\S-1-5-18\Com ponents
then reboot and run the update msi again. This also did not resolve the failure.
I downloaded the installer from the Apple download site as though it were a fresh install, and - voila! - it installed correctly and all content and settings were preserved. Hopefully that is all that is needed, not the steps above. Let me know! http://www.apple.com/itunes/download/

Error occurred in deployment step 'Install app for SharePoint': Failed to install app for SharePoint. provider-hosted app sharepoint on premise

Error occurred in deployment step 'Install app for SharePoint, ULS log as below:
0x0BA8 SharePoint Foundation         App Deployment                acjjg Medium The current user has System.Threading.Thread.CurrentPrincipal.Identity.Name
= 0#.w|perf\abraham.lincoln, System.Security.Principal.WindowsIdentity.GetCurrent().Name = NT AUTHORITY\IUSR, System.Web.HttpContext.Current.User.Identity.Name = 0#.w|perf\abraham.lincoln. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.39 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ag8d6 Medium SPApp: CreateAppUsingPackageMetadata: isCabStream is false. Treating the stream as a ZIP. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.39 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ahkn9 High    Deleting App with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
on site 264dc389-d394-4985-a43c-ad91a383c0df dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.39 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ahkob High    The App with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
on site 264dc389-d394-4985-a43c-ad91a383c0df was to be deleted, but it did not exist dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                abnqa Medium App Packaging: CreatePackage: There are 10 parts in the package. There are 1 package-part relationships
in the package. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyz6 Medium SPAppResources: ParseResources: No default resource file was found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyzx Medium SPAppResources: ParseResources: no resource file relationships were found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgs Medium SPPackageUtility: ExtractPart: Creating directory 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\AppManifest.xml' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '1072'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '1072', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\AppIcon.png' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '3540'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '3540', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.41 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aidi7 Medium SPIconAppPartValidator: IsSupportedFormat: image raw format is 'b96b3caf-0728-11d3-9d7b-0000f81ef32e'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyz6 Medium SPAppResources: ParseResources: No default resource file was found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afyzx Medium SPAppResources: ParseResources: no resource file relationships were found. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\featurecc1deab7-efdf-4cc2-80ae-60e073577d64.xml' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '321'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '321', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aebgt Medium SPPackageUtility: ExtractPart: Creating file 'C:\Users\abraham.lincoln.PERF\AppData\Local\Temp\71345ca6-3565-43d8-9017-2d3336965d8f\extract\elements4d87f314-4b0a-4b89-8a7e-9cb73c99f25f.xml' dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddw Medium SPPackageUtility: ExtractPart: Part stream length is '849'. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajddz Medium SPPackageUtility: ExtractPart: Length is '849', not locking before copying the stream. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aerhy Medium App Packaging - List of App Parts (count ='2'): Name='SPIconAppPart',Name='SPFeatureAppPart', dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                aerhz Medium App Packaging - List of Deployment Groups (count ='3'): Name='SPIconDeploymentGroup',Name='SPTargetWebDeploymentGroup',Name='SPQuickLaunchDeploymentGroup', dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.42 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                mq71 Medium Creating App with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
to site 264dc389-d394-4985-a43c-ad91a383c0df. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.44 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                afpd2 Medium Committing package with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ==
and data length 8010 to site 264dc389-d394-4985-a43c-ad91a383c0df. dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.46 w3wp.exe (0x2170)                       0x0BA8 SharePoint Foundation
App Deployment                ajk9e Medium Writing 8010 bytes to database for app with fingerprint TJQrYuD5N+kEe38LZtl6wSs3Ak3yYvWcmwuNLTqtpdFzb4qSMopN3SWCRdWvntrKoM7qIS2S2llpA5omi8iHqQ== dcf1d59c-94c5-5071-47bf-07cd3f2ead95
12/14/2014 23:54:27.50 w3wp.exe (0x2170)

Hi Jerry,
I agree with Nikhil, I think you have posted partial ULS log, we could not find effective errors for the issue.
For Provider Hosted app in SharePoint server on-premise,
the TokenHelper class will try to access your Azure Security Principle by default.
Did you have a valid Azure account?
If not, the issue may be caused that you don't have a valid account, to resolve this issue, you can use
a valid Azure account or not going to use Azure Platform for hosting the app as the article
below.
http://pratapreddypilaka.blogspot.jp/2012/12/sharepoint-2013-avoiding-azure-on-dev.html
Thanks,
Jason
Jason Guo
TechNet Community Support

ITunes 12.1.1 Consistently fails to install on WinOS7 SP1

For the past month and a half I have found that the Apple iTunes update will not install. I consistently receive an error popup stating "Errors occurred while installing the updates. I the problem persists choose Tools -> Download Only and try reinstalling manually". Well I've tried that and the update still will not install. But since iTunes still works I just run it and check the do not notify me of updates when the option to install appears. That worked until today when the update appeared on my taskbar and I was given the option of installing iTunes 12.1.1. Thinking this update may have somehow addressed my earlier installation issues I tried installing and ended up with the same error message I have been seeing for the past month and a half. So while trying the reinstalling manually method I repeatedly get a result of an iTunes error pop-up stating "Service 'Apple Mobile Service' (Apple Mobile Device Service) failed to start. Verify that you have sufficient privileges to start system services." Trying to right-click the iTunes6464 installer package to allow it to run as administrator is not listed as an option - this is because the installer never was registered with the system; therefore I am unable to run the installer with administrator privileges that are obviously needed to complete the installation. Retried without software firewall - same results. Search for restricted programs/services shows nothing on "Apple Mobile Device Service" (or anything similar).
I have not changed system settings and previous updates would just smoothly install. To me there is no plain reason why the sudden change in my ability to install a simple iTunes update. Is iTunes doing something different? Perhaps the administrator privileges were assumed to be in place by the time you started the installation.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

ITunes Sync app name here failed to install

Similar Messages

Maybe you are looking for