ITunes throwing cryptic error to the console while lagging

Everytime I change a file attribute in iTunes or delete a song, iTunes throws the following error to the console:
2/24/12 12:33:35.677 PM mds: (Warning) FMW: event:1 had an arg mismatch. ac:2 am:51
it takes several seconds to switch between songs or perform any kinds of simple editing like editing comments
In addition to these fun time, I've been getting the following popup alert window periodically when I attempt to open iTunes:
"The iTunes application could not be opened. An unknown error has occurred (-50)."
what gives? Also what is "FMW"?
MBP 17" quad i7
Lion Latest Build
8 gig ram
14TB array

yes I did actually!
I removed an iTunes-specific plugin called "Quartz Composer Visualizer.bundle" and all of the 3rd party iTunes visualizers
While I was snooping around I also removed a collection of old kernel extensions with ancient modification dates that just happened to perpetually migrate into each version of the OSX I updated to.
it's probably in your best interest to remove any iTunes plugins you have and see if you can replace them one at a time (assuming you have itunes plugs) until you discover the bug.
Another issue I had was excessive firewire cable length (total accumulated firewire cablelength) . This interferes with iTunes' ability to do a lot of things incl playback through a firewire audio interface while reading the music off a firewire drive
let me know if this helps

Similar Messages

TS1424 I can't open iTunes. Get error message "the file iTunes library.itl cannot be opened because it was created by a newer version of iTunes"

I cannot open itunes. Getting error message: "the file iTunes library.itl cannot be read because it was created by a newer version of iTunes"
What do I need to do so I dont lose all my loaded music, etc.?
Thanks

If you still have an issue you may have to see about using the iTunes version (application) included with Snow Leopard 10.6 from the installer or an another one if available online, and see if that will install.
Sometimes you may have uninstall the bits left in your system by the earlier (or later) iTunes installers; as they all leave a trace and these can stop a different version of iTunes from being installed.
Not sure if the following site/link will tell the method...
•Apple - Support - iTunes - install & update:
http://www.apple.com/support/itunes/install/
•Troubleshooting iTunes installation on Mac OS X:
http://support.apple.com/kb/HT2311
Good luck & happy computing!
ps: i see you resolved this issue. it's magic!

I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder

I can't open my Itunes keep receiving error message- The iTunes Library.itl file cannot be found or created. The default location for this file is in the "i Tunes" folder in the "Music" folder. I have even tried removing and reinstalling iTunes and it still does work because I continue to receive this error message. Please Help!

Anyone can help to advice how to solve this issue ?

"Message from Webpage (error) There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."

I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
Matt

We had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Loading issue : Error: sql error in the database while accessing a table

Hello,
where as one of the DTP in the process chain failed due to *Error: sql error in the database while accessing a table*, where as in the short dump it showing as Transaction log of data base is full., but i checked the data base space in DB02, more space is available . once we run the same DTP by manually its successful. its not through any errors.
could u please help me out solve the problem.
Thanks
siva kumar.

it might be a lock. do you drop index before loading?
the database might be full at the moment of loading and not later if many loadings happen at the same time on the same system...
when you then rerun your dtp manually, it can go through as it's perhaps the only one running at that moment...
you can try to set the btch parameter to 1...this will help in some cases.
M.

I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

I cannot open my itunes, I keep getting message, saying Itunes exe-system error. The progam can't start because SVCR80.dll is missing from your computer.?

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99807)

Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"?

Problem accessing iTunes. Getting error message "The iTunes Library Extras.itdb file is on a locked disk"

Close iTunes, delete iTunes Library Extras.itdb from your iTunes folder, start iTunes. iTunes should rebuild the file automatically.
tt2

Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50). Everytime I try to sync my phone?

Why does itunes give an error saying " The Iphone cannot be synced. An unknown error occured (-50)". Everytime I try to sync my phone? I have another Iphone that syncs with the same itunes account and it's working fine.

What operating system do you have on your computer?

Does Hibernate throw and error if the result set is above a specific #

Does Hibernate throw and error if the result set is above a specific #
of records?

why do you ask?Maybe he hasn't been able to find the bug in his code yet, so he's casting further and further about for more and more esoteric explanations for what he's seeing? ;-)
(God knows I've been there...)

Restore iphone 4 to install the ios 5 but something went wrong while doing back up and whenever i connect the phone to itunes theres an error and the phone turn off after 1min

hi guys i just downloaded the ios 5 and while it was doing back up something went wrong and everything were stopped and shows me a message as an error msg and now whenever i connect my iphone 4(32g) to itunes after 1min it goes off and the battery full and the same thing happend again and again can u help me guys plz i only see connect to itunes on the screen no options even

by reset option do you mean the DFU restore? worked for me, have you tried that?
if not - hold the lock and home button until the power down bar comes up. then hold the lock button for ten seconds - next continue to hold the lock button and press the home button for ten seconds - next release the lock button and hold the home button for 10 seconds. this should be done with the phone tethered. If done right and your itunes is configured as such, the phone will reload the drivers and start up itunes, and then prompt for a restore/update.

Error shown in console while running BPEL process

We have built one BPEL process that creates AR invoices in Oracle Apps from a legacy system. While deploying the process it deploys without Error, but when viewing the process through BPEL Console by clicking the instance it throws Below ERROR -- "java.rmi.RemoteException: No Exception - originate from:java.lang.Exception: No Exception - originate from:; nested exception is:
java.lang.Exception: No Exception - originate from:"
We have increased <transaction-config timeout="90000"/> residing in Oracle_Home\integration\orabpel\system\appserver\oc4j\j2ee\home\server.xml file. but still the Error remains same....
Any help will be appreciated.
Regards,
Suman

Have you created a connection pool with the JNDI specified while configuring adapter in Oracle Apps adapter on weblogic admin console. You should create it at Deployments --> OracleAppsAdapter --> Configuration--> Outbound Connection pools
Make sure to update the adapter after creating a connection pool so that changes can take effect.
Regards,
Anuj

Error Displayed on Console while Deplyoing a BPEL Process

While trying to deploy a BPEL Process which interacts with a external web service , no Error is seen either during validating the process, nor during compilation time , but on deploying the process the console displays the following Error
Build Information:
Oracle BPEL Server version 10.1.2.0.0
Build: 1442
Build time: Fri Apr 29 16:59:32 PDT 2005
Build type: release
Source tag: BPELPM_10_1_2_release_branch
Exception Message:
[java.lang.NullPointerException]
null
Exception Trace:
java.lang.NullPointerException
     at com.collaxa.cube.engine.deployment.ProcessRevisionRegistry$RevisionTable.remove(ProcessRevisionRegistry.java:296)
     at com.collaxa.cube.engine.deployment.ProcessRevisionRegistry.delete(ProcessRevisionRegistry.java:112)
     at com.collaxa.cube.engine.deployment.CubeProcessLoader.destroy(CubeProcessLoader.java:596)
     at com.collaxa.cube.engine.deployment.CubeProcessHolder.reload(CubeProcessHolder.java:972)
     at com.collaxa.cube.engine.deployment.CubeProcessHolder.loadAndBind(CubeProcessHolder.java:922)
     at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:787)
     at com.collaxa.cube.engine.deployment.CubeProcessHolder.getProcess(CubeProcessHolder.java:765)
     at com.collaxa.cube.engine.deployment.CubeProcessHolder.getStatus(CubeProcessHolder.java:211)
     at com.collaxa.cube.engine.deployment.DeploymentHelper.lookupProcessStatus(DeploymentHelper.java:301)
     at com.collaxa.cube.ejb.impl.FinderBean.lookupProcess(FinderBean.java:86)
     at IFinderBean_StatelessSessionBeanWrapper42.lookupProcess(IFinderBean_StatelessSessionBeanWrapper42.java:228)
     at com.oracle.bpel.client.Locator.lookupProcess(Locator.java:245)
     at displayProcess.jspService(_displayProcess.java:88)
     at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
     at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347)
     at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
     at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:810)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:220)
     at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:138)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:649)
     at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:322)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:270)
     at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:112)
     at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
     at java.lang.Thread.run(Thread.java:534)
Please touch base with suggestions to the problem.
Thank You.
Sri Vidya
Message was edited by:
Sri Vidya A

As I stated in my previous post, there is an issue with the BPEL process not responding back to ESB in a timely manner.
Unfortunately I don't have your process infront of me so it will require some thinking on your behalf to undersatnd how and why this may be happening.
Things to ask yourself.
- Is the data getting past correctly from the ESB to BPEL
- What happend to the BPEL process that the ESB called
- Is the ESB calling the BPEL process you are expecting, check server, and bpel versions
- What does the opmn or domain logs say
cheers
James

File upload throws an error if the file is opened

The file upload throws an Application type error if attached
file is opened and it returns the following error message: "The
MIME type of the uploaded file "application/octet-stream" was not
accepted by the server." The file type I tried to attach was MS
Word. It uploads fine if the file is closed.
Is this expected behavior? Is there fix for this - to be able
to upload a file while it is opened?

fcpssupport wrote:
> The file upload throws an Application type error if
attached file is opened and
> it returns the following error message: "The MIME type
of the uploaded file
> "application/octet-stream" was not accepted by the
server." The file type I
> tried to attach was MS Word. It uploads fine if the file
is closed.
>
> Is this expected behavior? Is there fix for this - to be
able to upload a
> file while it is opened?
>
do you have an ACCEPT attribute defined in your
<cffile>? if so, does it
include "application/octet-stream" MIME type?
Azadi Saryev
Sabai-dee.com
Vientiane, Laos
http://www.sabai-dee.com

Getting Error In the Routine - While writing Code for the Cross Reference.

Hi,
Getting Error In the Start Routine - While writing Code for the Cross Reference from the Text table ( /BIC/TZMDES with Fields /BIC/ZMDES(Key),TXTSH ) Getting Error as [ E:Field "ZMDES" unknown ].
Transformation : IOBJ ZPRJ3(Source) -> IOBJ ZPRJC ( Target ).
The Source Fields are: 0logsys(Key),zprj3(Key),ZDOM3.
The Target Fields are : 0logsys(Key),zprjc(Key),ZDOM3, UID.
Here i am trying to Update the target Field UID by Comparing the Source Field [ zprj3(Key)] with the Text table ( /BIC/TZMDES ) and update the UID.
The Code is as below:
Global Declarations in the Start Routine:
Types: begin of itabtype,
        ZMDES type /BIC/TZMDES-/BIC/ZMDES,
        TXT type /BIC/TZMDES-TXTSH,
         end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Routine Code :
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab.
CLEAR wa_itab.
The tys_SC_1 structure is :
BEGIN OF tys_SC_1,
     InfoObject: 0LOGSYS.
        LOGSYS           TYPE RSDLOGSYS,
     InfoObject: ZPRJ3.
        /BIC/ZPRJ3           TYPE /BIC/OIZPRJ3,
     InfoObject: ZDOM3.
        /BIC/ZDOM3           TYPE /BIC/OIZDOM3,
     Field: RECORD.
        RECORD           TYPE RSARECORD,
      END   OF tys_SC_1.
    TYPES:
      tyt_SC_1        TYPE STANDARD TABLE OF tys_SC_1
                        WITH NON-UNIQUE DEFAULT KEY.
Please suggest with your valuable inputs.
Thanks in Advance

I have split the code in two.. one for start routine.. other for field routine.. hope this helps
Types: begin of itabtype,
ZMDES type /BIC/TZMDES-/BIC/ZMDES,
TXT type /BIC/TZMDES-TXTSH,
end of itabtype.
data : itab type standard table of itabtype
with key ZMDES,
wa_itab like line of itab.
Start routine
select * from /BIC/TZMDES into corresponding fields of table itab for
all entries in SOURCE_PACKAGE
where ZMDES = SOURCE_PACKAGE-/BIC/ZPRJ3.
Sort itab.
field routine
CLEAR wa_itab.
READ TABLE itab INTO wa_itab
WITH KEY ZMDES = SOURCE_FIELD-/BIC/ZPRJ3
BINARY SEARCH.
IF SY-SUBRC = 0.
RESULT = wa_itab-<field name>

Error in the procedure while tried to increment the seq

Hello ,
I tried the following but giving the errors..
Plz help me in this..
CREATE OR REPLACE PROCEDURE Seq_inc AS
   vmaxarrec number(10);
   vseq number(10);
      select max(recid) into vmaxarrec from acc_rec;
      select SEQ_ACC_REC.currval into vseq from dual;
    BEGIN
      FOR i IN vseq .. vmaxarrec LOOP
        select SEQ_ACC_REC.nextval from dual;
      END LOOP;
    END ;And giving the following errors...
LINE/COL ERROR
4/7 PLS-00103: Encountered the symbol "SELECT" when expecting one of
the following:
begin function package pragma procedure subtype type use
<an identifier> <a double-quoted delimited-identifier> form
current cursor
The symbol "begin" was substituted for "SELECT" to continue.
11/9 PLS-00103: Encountered the symbol "end-of-file" when expecting
one of the following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
LINE/COL ERROR
<an identifier> <a double-quoted delimited-identifier>
<a bind variable> << close current delete fetch lock insert
open rollback savepoint set sql execute commit forall merge
Thanks

smile wrote:
SQL> CREATE OR REPLACE PROCEDURE Seq_inc AS
2     vmaxarrec number(10);
3     vseq number(10);
4
5      BEGIN
6      select max(recid) into vmaxarrec from acc_rec;
7      select SEQ_ACC_REC.currval into vseq from dual;
8
9        FOR i IN vseq .. vmaxarrec LOOP
10          select SEQ_ACC_REC.nextval from dual;
11        END LOOP;
12
13      END ;
14 /
Warning: Procedure created with compilation errors.
SQL> sho err
Errors for PROCEDURE SEQ_INC:
LINE/COL ERROR
10/9     PLS-00428: an INTO clause is expected in this SELECT statementI tried with the above correction ..and still errorsIt looks to me like you're trying to reset the sequence number to a new starting value. In reality there's very little point in doing this, though I've come across a few test scenarios where it's good to start with the same sequence number each time.
The logic for changing a sequence to a particular value is along the lines of:
SQL> select test.nextval from dual;
   NEXTVAL
       125
SQL> var v_inc number;
SQL> var v_resetno number;
SQL> exec :v_resetno := 50;
PL/SQL procedure successfully completed.
SQL> exec execute immediate 'select -(test.nextval-:x)-1 from dual' into :v_inc using :v_resetno;
PL/SQL procedure successfully completed.
SQL> exec execute immediate 'alter sequence test increment by '||:v_inc;
PL/SQL procedure successfully completed.
SQL> select test.nextval from dual;
   NEXTVAL
        49
SQL> alter sequence test increment by 1;
Sequence altered.
SQL> select test.nextval from dual;
   NEXTVAL
        50
SQL> select test.nextval from dual;
   NEXTVAL
        51
SQL>Note: In your code you are reading the currval of the sequence before you know that you've read the nextval. That will give an error, because the currval is only known within the current session after a nextval has been obtained.
So, as a procedure, you want something like:
CREATE OR REPLACE PROCEDURE Seq_inc AS
v_maxarrec number;
v_inc      number;
v_seq      number;
BEGIN
select max(recid)+1 into v_maxarrec from acc_rec; -- get the required sequence value
select -(seq_acc_rec.nextval-v_maxarrec)-1 into v_inc from dual; -- determine the difference
execute immediate 'alter sequence seq_acc_rec increment by '||v_inc; -- alter the sequence
select seq_acc_rec.nextval into v_seq from dual; -- query the sequence to reset it
execute immediate 'alter sequence seq_acc_rec increment by 1'; -- alter the sequence to increment by 1 again
END ;(+untested+)

ITunes throwing cryptic error to the console while lagging

Similar Messages

Maybe you are looking for