Itunes timing out when updating

I am trying to uo date iTunes to 8.0.2 and when i chick on "update" is goes through the motions with the system updater and after i chick "agree" on the terms and then a message pops up that says "A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again." And yes, i am connected to the internet because i just updated Safari with the same updater. Suggestions?

Before beginning the download, try temporarily disabling the antivirus, anti-adware, anti-spyware, and any other anti-whatever that is required and is running with that secure OS.

Similar Messages

Itunes timing out when trying to connect to store

So I'm about to recieve an iphone in an hour or two and i'm a little upset because for the past hour i've tried to connect to the itunes store and everytime but once it has timed out. my internet is working fine and i can download my podcasts and play music fine. any troubleshooting i can do so i can connect and set up my new cell subscription?

I was reading another thread and this worked perfectly for me. I kept trying to get this computer authorized and it would time out everytime. All I did was go up to the store menu, sign out, and sign back in. Nothing timed out, I was able authorize and I am back to listening to music again.

Connection timed out when updating - why?

trying to upgrade to iOS5 but keeps telling me to try again/check my network connections, i have tried several times over the last 3 hours .... do i have to remove the windows firewall on my pc

You don't have to remove your firewall, just temporarily turn that and your software antivirus software off until the download has completed.

HT4623 I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do???

I am having trouble with my iPod 5th gen after iOS update. It's in recovery mode and iTunes keeps timing out when I try to restore it. What should I do??? If possible, I would also like to keep all of my data.

Maybe this will help:
Troubleshooting
As with all clickwheel iPods, you can reset this iPod by first toggling the hold switch on and off and then simultaneously pressing the select (center) and menu buttons for approximately 5-10 seconds. This is a common fix should your iPod behave unexpectedly or lock up. Once reset, the iPod should display an Apple logo for a few seconds before showing the main menu. This procedure is similar to rebooting a computer and damages none of your music or data.

ITunes store keeps saying that my session has timed out when trying to buy a product from the store

I Tunes is telling me that my session has timed out when trying to buy a gift voucher, which i have done many times before.
The most recent change i'v made to my computer before this happened was to download an update (MacOSX updatecombo 10.7.3dmg)
a couple of weeks ago. I'v turned off the firewall as suggested whilst trying to transact and turned it back on again, but don't know
what else to try. The problem is three days old as i left and came back to it to see if there might be a glitch in the system.
I'v been able to access the credit i have in the store, but not buy the itunes voucher to email to my own a/c. Please help someone if you can
Sandystone.

Thanks for your suggestion Ned01, I tried this as a last ditch attempt, unfortunatly it made no difference in my case, but i'm pleased it did for you. However, because you reminded me to have another go at this problem, i tried something else (which i'd unsucsessfuly tried before), that is, i deleted the 'CLICK & SAVE " a/c i'd set up recently, and reverted to my previous payment me and would you know it , this time it worked !! I set up a trail purchase and it worked.
It seems to me that other poeple with this problem have to solve it by trail and error, but thank you for your help.Sandystone..

It says my session has timed out when I try and update an iOS game.What should I do to fix it?

IT says my session has timed out when I try to update and ios game.What should I do to update my games?

You may have a USB issue as documented here:
http://support.apple.com/kb/TS5254

How do I stop my itunes from saying my session has timed out when i'm trying to download a song

How do I stop my itunes from saying my session has timed out when i'm trying to download a song

What troubleshooting steps have you tried so far?
Basic Troubleshooting Steps when all else fails
- Quit the App by opening multi-tasking bar, and swiping the App upward to make it disappear. (For iOS 6, holding down the icon for the App for about 3-5 seconds, and then tap the red circle with the white minus sign.)
- Relaunch the App and try again.
- Restart the device. http://support.apple.com/kb/ht1430
- Reset the device. (Same article as above.)
- Reset All Settings (Settings > General > Reset > Reset All Settings)
- Restore from backup. http://support.apple.com/kb/ht1766 (If you don't have a backup, make one now, then skip to the next step.)
- Restore as new device. http://support.apple.com/kb/HT4137 For this step, do not re-download ANYTHING, and do not sign into your Apple ID.
- Test the issue after each step. If the last one does not resolve the issue, it is likely a hardware problem.

Request timed out when purchasing music. Fresh install of Win7.

For the past couple months I have have not been able to purchase music off iTunes without first going into Add/Remove programs and doing a "Repair" to iTunes. Windows Firewall wasn't blocking anything from Apple and even with the firewall totally disabled I would still get the "Request timed out" error. And at the same time I'm getting these errors, a Podcast can be in the background downloading or I can be previewing a song! I eventually gave up and just figured its some random windows bug that isn't very common or its just another example of iTunes sucking for Windows and Apple not caring. I just purchased most of my music off AmazonMP3 which I've been doing more and more of anyway.
Yesterday I installed a new HDD and installed a fresh copy of Windows 7 Home Premium from my retail disc. I Installed all the updates then proceeded to install my software and put all my media back in-place. I'm a backup neat-freak so all this happen pretty easily and fast. I purchased a song off iTunes and was pleased to see it working again. Well here I am again suddenly having the issue with the connection timing out when purchasing a song. Firewall is configured fine and again I even disabled it. I know its not Windows now as there haven't been any new Drivers or Updates installed since I last purchased a song. I even tried different network adapters! What the heck is going on?

This error is specific to RAS. The default CORBA request timeout is 10 minute = 600000 ms. When the RAS SDK does not get the reponse back from RAS server in 600000 ms it throws this message. Why it works in InfoView\CMC what I believe you refer to as "Front End' application is because InfoView\ CMC don't use RAS.
1. First make sure that a smaller report wich runs pretty fast ( 1-2 min) works. This will confirm that there is no connectivitiy issues between RAS and RAS SDK.
2. If you get the efrror for every single report, even the smaller ones, make sure the box running RAS and RAS SDK code( in case they are 2 different) can ping each other with IP, shortname and FQDN. If there is a firewall between them, the RAS port needs to be opened for bidirectional communication. By default RAS chooses a random port for communication with SDK but within CMC you can configure it to use a specific port and open it.
3. If the issue is specific only to reports that are long running, typically more than 10 minutes, then you need to inclease the CORBA timeout to a value more than what the reports typically would take to process. This is done on client code side or IIS in this case.
Here are the steps:
Make the following changes on the application server/system.
Open RegEdit by going to Start > Run and typing in regedit.exe. Then click Ok.
Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Report Application Server\Client SDK\CorbaAdapter
Change the value of SendRequestTimeout(ms) to 100000.
Change the value of WaitReplyTimeout(ms) to 6,000,000 ms. The default value is 600,000 ms and may not be long enough.
Restart IIS by going to Start > Run and typing in iisreset. Then click Ok.
Retry the failing application.
See note: 1296656
This error should be easy to fix
Edited by: Aasavari Bhave on Feb 2, 2012 11:20 AM

HT1688 the network connection timed out while updating iphone software

the network connection timed out while updating iphone software and cannot continue.

Might want to search the Mac forum or post there... also, this thread is over 2 years old.

HT4972 iTunes times out when trying to download iOS 5.1

iTunes times out when trying to download iOS 5.1 - can anyone help? Can I download via a browser and then install that way?
Looking here http://osxdaily.com/2012/03/07/ios-5-1-download/ - I can download an ipsw file - how would I get that to install on my iPhone4?
Help!
Cheers
P.S. My iPhone4 is on Orange UK - is this a GSM one? or CDMA???

Hi,
Tap Settings > General > Reset > Reset Network Settings
Now restart your iPad. Hold the On/Off Sleep/Wake button down until the red slider appears. Slide your finger across the slider to turn off iPhone. To turn iPhone back on, press and hold the On/Off Sleep/Wake button until the Apple logo appears.
If that didn't help, you need to post in the iPad forum here.
This is the forum for Safari for the Mac OS X.

Tabular data model: Query keeps timing out when attempting to Edit Table Properties

Tabular data model (SSDT)
Problem: I have a table in tabular data model using a SQL Query for a data source. The query in question requires about 3 minutes to regenerate. When I open Edit Table Properties for this data source the query times out and I get an error (see below): "
Failed to retrieve data from udvTrainJobReportsData. Reason: Query timeout expired"
This seems to happen anytime I use a query that takes longer than a couple of minutes to regenerate. Anyone have an idea on how to get around this. Is there a timeout setting somewhere in tabular data model that can be increased?
Thanks...

Hi ManikantM,
According to your description, you query keeps time out when edit table properties. Right?
In this scenario, this error is thrown when connection or query execution exceeds the time out value. Please try to import this table and then increase the connection time out seconds.
We can increase to ExternalCommandTimeout in Analysis Server Properties. Please refer to link below:
http://aniruddhathengadi.blogspot.in/2012/07/ole-db-error-ole-db-or-odbc-error-query.html
Please also refer to a similar thread below:
https://social.technet.microsoft.com/Forums/office/en-US/3f83a26b-71c6-462e-8b90-2ce2ce0b9465/powerpivots-2010-query-keeps-timing-out-when-attempting-to-edit-table-properties?forum=excel
Best Regards,
Simon Hou
TechNet Community Support

JDBC activity timed out while updating a table.

Hi,
We have observed the exception *'JDBC activity timed out while updating the table -Table1"* in our logs in prod environment.
1)we verified the AWR report for that particular time and observed that one update statement was trying to update the table table1.
its a simple update statement as below
UPADTE TABLE1 SET COL1=VAL1,COL2=VAL2 WHERE ID1=VAL1 AND ID2=VAL2;
there is a PK index on ID2 column.
2)we also came to know that there were no locks on TABLE1 during this time.
can some one please let me know what could be the possible reason for this kind of exception?
Thanks

958572 wrote:
Hi,
We have observed the exception *'JDBC activity timed out while updating the table -Table1"* in our logs in prod environment.
1)we verified the AWR report for that particular time and observed that one update statement was trying to update the table table1.
its a simple update statement as below
UPADTE TABLE1 SET COL1=VAL1,COL2=VAL2 WHERE ID1=VAL1 AND ID2=VAL2;
there is a PK index on ID2 column.
2)we also came to know that there were no locks on TABLE1 during this time.
can some one please let me know what could be the possible reason for this kind of exception?
ThanksOS/Networking mis-configuration.
Oracle does not know or care about the type or flavor of remote client (JDBC, OCI, ODBC, etc).
Oracle's default configuration contains no timeout.
I suspect a FireWall setting.

Itunes bombs outs when selecting "store" with UBD.exe issue

Itunes bombs outs when selecting "store" with UBD.exe issue - what is the remedy?

Hello there, tuneasa.
The following Knowledge Base article offers some great steps for troubleshooting issues with iTunes performance:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

TS1538 my iphone 5s showing timed out when i access to i tunes on windows 7,pls help me

my iphone 5s showing timed out when i access to i tunes on windows 7,pls help me

Try again with your firewall & anti-virus off.

I forgot my ipod password and when I try to restore and update thru itunes, it keeps timing out when the download is done

I forgot the password to my ipod touch, when I try t restore and update thru itunes it keeps timing out at the end of the download?

Try disabling your computer's security software.

Itunes timing out when updating

Similar Messages

Maybe you are looking for