ITunes Track CPR doesnt seem to be working
I have been trying to use the track cpr script to find some "lost" songs that arent really lost... the script doesnt seem to be doing much of anything when I run it.... this is on 10.6.4 with itunes 9.2.1
Results:
iTunes Track CPR
Total tracks: 18
Total MIAs: 8
Recovered: 0
Still MIA: 0
I know the files are are in the proper itunes style folder structure... im stumped why this isnt working. maybe my itunes version is too new??
have you tried toggling the hold switch...if that doesn't work, restor ipod nano (plug in nano, got to ipod updater, click restore [i may have the first otwo steps switched, so if is doesn't work, try with step 2 first])...if that doesn't work either, go to an apple store (if there is one near you)to get it replaced...if you don't live near one, send it in to apple (since so many people have problems that apple doesn't identify when they send it in, put a small note in the package
Similar Messages
-
im trying to update IOS version, have done everything as recommended. however, it doesnt seem to be working, when i try to buy a tune i am again prompted to update to new IOS version... can anyone offer any advice
Is this an iPhone or iPad question? You posted in the iPad forum.
See
iOS 5: Updating your device to iOS 5
http://support.apple.com/kb/HT4972
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
Tip - You may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
BBC iPlayer - This content doesnt seem to be working
Hi all, I have tried so many fixes but cant seem to fix the problem
When I log into my user and go on the BBC iPlayer website and click on any video, it loads perfectly fine.
However, when my mum logs onto her user account she cant play any videos.
The message that comes up for ANY video is 'This content doesnt seem to be working. Try again later'
This message never shows up on my side of the computer.
We have an iMac 2GHz Intel Core 2 Duo,
4 GB RAM,
Mac OS X Lion Version 10.7.4,
The newest version of Flash installed (obviously because it works on my side)
The newest version of Safari installed
I have tried removing Flash from the computer then reinstaling it.
I also tried repairing disk permissions through Disk Utility.
I even tried deleting the Safari preferences in Library.
I tried reinstalling Safari
I tried installing 'click to flash' to see if it would convert it to HTML5 but that didnt work. So I deleted the extension.
It will load fine in Chrome & Firefox. So we can assume with this that its a problem with my mums Safari.
Does anyone have any ideas on how to fix this or has anyone had this happen to them?
I do realise the easiest solution would be to just watch BBC iPlayer stuff on another browser or download the BBC iPlayer App and watch videos through there but thats a hassle when it used to work in Safari and actually works in Safari on my side of the computer.
Thanks in Advance.Never mind, after all that and searching loads of forums & discussions it turned out that it was little Snitch and its 'plugin process' turned off.
switched it to allow and its working now. -
I cant seem to get cd's that I have uploaded onto my iphone 5 via itunes. I have tried to highlight the items and drag and drop them into my phone but this isnt working...; This is really starting to frusterate me!!!
Please help meIf you have not already reverted the look and feel to be like iTunes 10 then
View > Show Sidebar
View > Show Statusbar
click on the black arrow in the search box and untick Search Entire Library
Now you should be able to drag and drop onto your phone or use the sync pages
http://support.apple.com/kb/PH12113
If your still having issues with your phone then Try this trouble shooting link
http://support.apple.com/kb/TS1591 -
Preview out in Final Cut Pro 6, doesnt seem to be working
I have a cilent coming over in a few hours and im having some issues getting the preview out from my computer to my TV to work. I refreshed everything, and its set to "All Frames" but all i seem to be getting is a black screen.
its DV format, We are running it though a JVC Deck VIA Firewire. It has worked with Final Cut Pro 5 and up but 6 seems to be an issue, Nothing has changed but the software
-
WLS 9.2 with TIBCO ems integration doesnt seem to be working
Hi, I followed the steps provided by Tibco doc on how to integrate with WLS 8 and they worked fine with my app, the messages were getting in to the Tibco queues, but I didnt find any steps on how to integrate TIBCO with WLS 9.2.
Still I managed to extrapolate the below steps from the WLS 9.2 JMS foreign server config instructions to have them work with TIBCO, but my App fails with errors saying... "Failed to send message using the connection..."
Anyone has the correct working instructions to integrate TIBCO with WLS 9.2?
---------- In Tibco ems --------------------
Created 2 queues:
OrderJMSQueue
ShippingMDBQueue
Created 2 connection factories:
ShippingMDBQueueCF
OrderJMSQueueCF
---------- end In Tibco ems --------------------
---------- In WLS 9.2 server --------------------
1. In C:\WLS92\user_projects\domains\pqedomain\bin\startweblogic.bat
Add:
set CLASSPATH=C:\Tibco\ems\clients\java\tibjms.jar;%CLASSPATH%
(assuming that Tibco is installed under C:\)
2. Start the WLS 9.2 Server
3. Open the WLS 9.2 admin page: http://localhost:7080/console
4. Select Services -> Messaging -> JMS Modules
5. Click New
a. Set Name: "jms-mod"
6. Click on "jms-mod"
7. Create a Resource "Foreign JMs server"
Name: PurchasingAppJMSServer
JNDI Initial Context Factory: com.tibco.tibjms.naming.TibjmsInitialContextFactory
JNDI Connection URL : tibjmsnaming://localhost:7222
8. Under PurchasingAppJMSServer
a. Click on Destinations -> New
i. Name: OrderJMSQueue
ii. Local JNDI Name: OrderJMSQueue
iii. Remote JNDI Name: OrderJMSQueue
b. Click on Save
9. Again under PurchasingAppJMSServer
a. Click on Destinations -> New
i. Name: ShippingMDBQueue
ii. Local JNDI Name: ShippingMDBQueue
iii. Remote JNDI Name: ShippingMDBQueue
b. Click on Save
10. Again under PurchasingAppJMSServer
a. Click on Connection Factories -> New
i. Name: OrderJMSQueueCF
ii. Local JNDI Name: OrderJMSQueueCF
iii. Remote JNDI Name: OrderJMSQueueCF
b. Click on Save
11. Again under PurchasingAppJMSServer
a. Click on Connection Factories -> New
i. Name: ShippingMDBQueueCF
ii. Local JNDI Name: ShippingMDBQueueCF
iii. Remote JNDI Name: ShippingMDBQueueCF
b. Click on Save
12. Come up to the Home page
13. Click on Services -> Foreign JNDI Providers
14. Click on New
15. Enter Name: PurchasingAppJMSServer
16. Click Save
17. Click on "PurchasingAppJMSServer" under the "Summary of Foreign JNDI Servers"
a. Set Initial Context Factory: com.tibco.tibjms.naming.TibjmsInitialContextFactory
b. Set Provider URL: tibjmsnaming://localhost:7222
c. Set User: admin
d. Click SaveI have tried this succesfully with 8.2 and 9.2. No patch was required though it is not a bad idea to apply patch.
As mentioned above, On weblogic side, I configured:
1) Foreign JMS Server
2) Foreign JMS Destination
3) Foreign JMS Connection Factory
I did not configure foreign jms provider.
On EMS side, I created a Queue. That's it.
I used default connection factory in EMS (QueueConnectionFactory)
This is how my MDB class looks like:
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.TextMessage;
import weblogic.ejbgen.MessageDriven;
import weblogic.ejbgen.ForeignJmsProvider;
@MessageDriven(ejbName = "SubscriberMessageDrivenBean",
destinationJndiName = "subscriberNotificationQueue",
destinationType = "javax.jms.Queue",
maxBeansInFreePool = "200",
initialBeansInFreePool = "20",
transTimeoutSeconds = "180",
defaultTransaction = MessageDriven.DefaultTransaction.NOT_SUPPORTED
@ForeignJmsProvider(connectionFactoryJndiName="QueueConnectionFactoryLocal")
public class SubscriberMessageDrivenBean extends JMSInterface {
public void OnMessage(Message inMessage) {
try {
System.out.println("Reached onMessage");
} catch (JMSException exp) {
e.printStackTrace();
and ejb-jar.xml like this......
<?xml version="1.0" encoding="UTF-8"?>
<!--
** This file was automatically generated by
** EJBGen WebLogic Server 9.2 SP1 Sun Jan 7 00:56:31 EST 2007 883308
-->
<ejb-jar
xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/ejb-jar_2_1.xsd"
version="2.1">
<enterprise-beans>
<message-driven>
<ejb-name>SubscriberMessageDrivenBean</ejb-name>
<ejb-class>com.att.cpni.common.interfaces.jms.atlas.SubscriberMessageDrivenBean</ejb-class>
<transaction-type>Container</transaction-type>
<activation-config>
<activation-config-property>
<activation-config-property-name>destinationType</activation-config-property-name>
<activation-config-property-value>javax.jms.Queue</activation-config-property-value>
</activation-config-property>
</activation-config>
</message-driven>
</enterprise-beans>
<assembly-descriptor>
<container-transaction>
<method>
<ejb-name>AccountMessageDrivenBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>NotSupported</trans-attribute>
</container-transaction>
<container-transaction>
<method>
<ejb-name>SubscriberMessageDrivenBean</ejb-name>
<method-name>*</method-name>
</method>
<trans-attribute>NotSupported</trans-attribute>
</container-transaction>
</assembly-descriptor>
</ejb-jar>
and weblogic-ejb-jar.xml like this.......
<?xml version="1.0" encoding="UTF-8"?>
<!--
** This file was automatically generated by
** EJBGen WebLogic Server 9.2 SP1 Sun Jan 7 00:56:31 EST 2007 883308
-->
<weblogic-ejb-jar
xmlns="http://www.bea.com/ns/weblogic/90" xmlns:j2ee="http://java.sun.com/xml/ns/j2ee" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.bea.com/ns/weblogic/90 http://www.bea.com/ns/weblogic/90/weblogic-ejb-jar.xsd">
<weblogic-enterprise-bean>
<ejb-name>SubscriberMessageDrivenBean</ejb-name>
<message-driven-descriptor>
<pool>
<max-beans-in-free-pool>200</max-beans-in-free-pool>
<initial-beans-in-free-pool>20</initial-beans-in-free-pool>
</pool>
<destination-jndi-name>subscriberNotificationQueue</destination-jndi-name>
<connection-factory-jndi-name>QueueConnectionFactoryLocal</connection-factory-jndi-name>
</message-driven-descriptor>
<transaction-descriptor>
<trans-timeout-seconds>180</trans-timeout-seconds>
</transaction-descriptor>
</weblogic-enterprise-bean>
</weblogic-ejb-jar> -
My ipod 6th generation doesnt seem to be working properly. what can I do?
When I connect my iPod to my computer all my music is there and I am able to play them with no complications but the screen doesn't display anything. Its been like this for over four weeks now and I am unable to use it. I've tried the down button and the power button also leaving it to charge for over an hour and nothing. While trying to get it to operate there were a few times I noticed signs of the screen turning on for a few seconds then shuts back off. The longest it was on for was about a good few minutes but then the battery was low then shut off and now want to turn on for nothing and nothing seems to charge it. Any suggestions?
iPod nano (6th generation) - User Guide
-
Sync doesnt seem to be working on my computers
Aloha,
I have used Firefox sync before firefox took it over. It has always worked before with no to very little problems until now. I have 3 computers, desktop, laptop, and office desktop. I am logged into the sync server on all 3, no problems.. But nothing ever syncs. I have re-set the keys, still no sync. all of this used to work. If i use Chrome, sync works just fine, but firefox sync... no go.....Make sure you are plugging things in after you have logged in. That is one of the biggest problems for me. An icon should appear on your desktop when it is plugged in. Take a look at the port, but don't mess around with it. Just see if there is any debris in there.
-
Tracking number doesnt seem to register?
I finally got my tracking number, but when i enter it in the website it says: >>> UPS could not locate the shipment details for your request. Please verify your information and try again later...... it has said this all day
so when do you think it will get here? I mean, I ordered it on the tenth, and it was supposed to have overnight shipping. when i check on my order on the verizon website, it states that my order has been shipped, and also says estimated ship date is february 14th... so is that when ill get it? tomorrow?
-
Arrays.equals doesnt seem to be working
Hi
i have an app that copys the contents of an object array into another, then reruns and compares its contents to the previous copy. they should be equal, but i get a not equal message. i have tried printing out the objects in a loop to see whats happening, i get this:
(code)
for(int i = 0; i < count; i++)
System.out.println(TestPcContainer);
System.out.println(TestPcContainerCopy[i];
output:
Thread[Thread-20,5,main] (orig element 0)
Thread[Thread-15,5,main] (copy element 0)
Thread[Thread-21,5,main] (orig element 1
Thread[Thread-16,5,main] (copy element 1)
Thread[Thread-22,5,main] (orig element 2)
Thread[Thread-17,5,main] (copy element 2)
i dont understand why i keep getting its not equal. i have copied the arrays using : System.arraycopy(TestPcContainer, 0, TestPcContainerCopy, 0, count);
and i compare by doing: if(Arrays.equals(TestPcContainer, TestPcContainerCopy)) { System.out.println("equal");}else not ......
thanx for any help on this
nessok,heres the code:
ckage tmhealthproject;
import com.xyratex.utils.EventHandler;
import com.xyratex.utils.EventInterface;
import com.xyratex.xyrmi.io.XYRMIMessageHandler;
import com.xyratex.xyrmi.io.XYRMIObjectInterface;
import com.xyratex.xyrmi.tcp.XYRMIClient;
import java.io.*;
import java.net.UnknownHostException;
import jicmp.*;
import java.util.*;
* <p>Title: TMHealthStatusTestPc </p>
* <p>Description: Class reads in ip addresses from IpAddress.txt, then creates 16 new
* TMHealthStatusTestPc objects, allocating each one an ip address from the txt file. Each object represents
* a tm, and holds 3 fields of data: ipaddress, Morb and TM. These attributes are set to 1 or a zero depending
* on whether the tm is on or offline, its orb is running and the TestManager software is running. Once these
* checks have been done, the data is sent to the calling application, either terminal or applet.
* <p>Copyright: Copyright (c) 2003</p>
* <p>Company: Xyratex</p>
* @author Vanessa Radford
* @version 1.0
public class TestPc extends Thread implements XYRMIMessageHandler, EventInterface
FileReader filereader;
BufferedReader bufferedreader;
String ipaddress = new String();
int count;
TestPc TestPcContainer[];
TestPc TestPcContainerCopy[];
TestPc testpc = null;
int ipvalid = 0;
int morbvalid = 0;
int tmvalid = 0;
int result = 0;
String tmname = new String();
String host = "127.0.0.1";
String className = "className";
String objectName = "broadCast";
int port = 9765;
String object = new String("Object:");
XYRMIClient Orblink;
XYRMIClient Orblink1[];
XYRMIClient Orblink2[];
String initalMessage1 = (objectName + " " + className + "1 ");
String initalMessage2 = (objectName + " " + className + "2 ");
String initialMessage3 = (objectName + " " + className + "3 ");
EventHandler StatusRequestTimer = null;
EventHandler StatusResponseTimer = null;
int counter = 0;
String viewMessage = (objectName + " StatusView " + "status " + "numberoftms:");
*</p> This method opens the TMipaddress.txt file, reads in each line, creates a
* TMHealthStatusTestPc object for each line that is read in, and assign it an ip address.
* These objects are then stored into a container called TestPcContainer</p>
public void initializeObjects()
counter ++;
//set a count variable to zero. this variable sets the sizes of the Container and Orblink arrays
count = 0;
//try to find the file TMipaddress.txt
try
filereader = new FileReader("TMipaddress.txt");
bufferedreader = new BufferedReader(filereader);
//count how many ip addresses it holds
while ((ipaddress = bufferedreader.readLine()) != null)
count ++;
catch(IOException ioexception)
System.out.println(ioexception.getMessage());
//open the file again and read each line
//now we have the number of tms in the txt file, call the setArraySizes method
//and send it the count variable. This will inialize the containers and arrays to the correct size
setArraySizes(count);
TestPcContainer = new TestPc[count];
try
filereader = new FileReader("TMipaddress.txt");
bufferedreader = new BufferedReader(filereader);
for(int i = 0; i < count; i++)
//for each ip address create a new testpc object
testpc = new TestPc();
//read in each line from the txt file
ipaddress = bufferedreader.readLine();
//create a tokenizer object for each line, and ignore any tabs, spaces or newlines
StringTokenizer str = new StringTokenizer(ipaddress, " \n\t\r,");
//send to the setTmName method the first part of the line which holds the tm name
testpc.setTmName(str.nextToken());
//send to toe setIp method the second part of the line whcih holds the ip address
testpc.setIp(str.nextToken());
//add the object to the container
TestPcContainer[i] = testpc;
catch(IOException e)
//call the method that checks the ip addresses
checkIp();
*<p>This method creates a new ICMPPing object in a loop, and passes in a TestPc object
* as an argument to its constructor. The ICMPPing object extracts the TestPcs host ip
* address and conducts an ICMP ping on it. The result of this is passed back into setIPValid.
* The loop ends when all of the TestPc objects stored in the container have been passed in.
* There is then a 10 second sleep for the data to be collected, then the morb is done </p>
*@param pc Takes a TMHealthStatusTestPc object as its argument
public void checkIp()
for(int i = 0; i < count; i++)
//create a new ICMPPing object and pass in each object in the container
ICMPPing checkIPAddress = new ICMPPing(TestPcContainer);
try
//sleep so that the data can be collected
Thread.sleep(2000);
catch(Exception e)
System.out.println("message in checkip is " + e.getMessage());
//call the morb check
System.out.println("checking morbavail");
checkMorbAvail();
public int doSomething()
if(counter != 1)
if(Arrays.equals(TestPcContainer, TestPcContainerCopy))
StatusRequestTimer();
else
sendRMI();
StatusRequestTimer();
if(counter ==1)
sendRMI();
StatusRequestTimer();
return 1;
public void setArraySizes(int count)
TestPcContainer = null;
if(TestPcContainerCopy == null)
TestPcContainerCopy = new TestPc[count];
if(Orblink1== null)
Orblink1 = new XYRMIClient[count];
if(Orblink2 == null)
Orblink2 = new XYRMIClient[count];
*<p>Method to send RMI message to StatusView applet. Checks to see if an OrbLink has already been created,
* if so uses XYRMIMessageHandler to forward message. Otherwise registers with the Orb of the TM and forwards
* message within registration</p>
*@return int
public int sendRMI()
StringBuffer ipbuffer = new StringBuffer();
for (int t = 0; t < count; t++)
t++;
ipbuffer.append(" Object" + t + ":");
t--;
ipbuffer.append("\"" + TestPcContainer[t].getTmName() + ",");
if(TestPcContainer[t].ipvalid == 1)
if(TestPcContainer[t].morbvalid == 1)
if(TestPcContainer[t].tmvalid == 1)
ipbuffer.append("OK\"");
else
ipbuffer.append("NoTestMan\"");
else
ipbuffer.append("NoOrb\"");
else
ipbuffer.append("TimedOut\"");
String result = ipbuffer.toString();
try
if(counter != 1)
Orblink.XYRMIMessageHandler(viewMessage + "\"" + count + "\"" + result);
else
Orblink = new XYRMIClient(this, host, port, viewMessage + "\"" + count + "\"" + result);
Orblink.SetIdentity(className, objectName);
Orblink.start();
catch(Exception e)
System.out.println("error in sendrmi " + e.getMessage());
return 1;
*<p>This method runs the applicatoin every 60 seconds, so that accurate data is recorded</p>
public void StatusRequestTimer()
StatusRequestTimer = new EventHandler(this, "message");
StatusRequestTimer.initialise();
StatusRequestTimer.startEvent(90);
public void eventMessage(Object obj, String s)
if(obj == StatusRequestTimer)
System.arraycopy(TestPcContainer, 0, TestPcContainerCopy, 0, count);
TestPcContainer = null;
testpc = null;
initializeObjects();
*<p>method to set an ip address </p>
*@param ipadd IP address
public void setIp(String ipadd)
ipaddress = ipadd;
public void setTmName(String tm)
tmname = tm;
*<p>method to get an ip address</p>
*@return string ip address
public String getIp()
return ipaddress;
public String getTmName()
return tmname;
*<p>method to get whether the tm was valid, meaning it responded or not. /p>
*@return string ip address
public int getTmValid()
return tmvalid;
*<p>method to get whether the ip address was valid, meaning online or not, 1 for valid, 0 for not</p>
*@return string ip address
public int getIpValid()
return ipvalid;
*<p>method to get whether the morb on the TestPc is running or not, 1 for valid, 0 for invalid</p>
*@return int morbValid
public int getMorbValid()
return morbvalid;
*<p>method to set validity of the ip addres, recieves result from TMHealthStatusICMPcheck</p>
*@param result passed in result of validity check on ip address, 1 for valid, 0 for invalid</p>
public void setIPValid(int result)
ipvalid = result;
*<p>method to set validity of the Morb to the result</p>
*@param result passed in result of validity check on morb, 1 for valid, 0 for invalid</p>
public void setMorbValid(int result)
morbvalid = result;
*<p>method to set validity of the Morb to the result</p>
*@param result passed in result of validity check on morb, 1 for valid, 0 for invalid</p>
public void setTmValid(int result)
tmvalid = result;
*<p>method to create new XYRMIClient object, pass to it a TMHealthStatusTestPc object, extract
* its ip address, then send an rmi message to the orb of that machine. Used to check if the TestPc's
* Orb is runnning.
*@param pc TMHealthStatusTestPc object
public int checkMorbAvail()
for(int q = 0; q < count; q++)
if(TestPcContainer[q].getIpValid() == 1)
host = TestPcContainer[q].getIp();
if(counter != 1)
Orblink1[q].XYRMIMessageHandler(initalMessage2 + host);
}//close if
else
try
Orblink1[q] = new XYRMIClient(this, host, port, initalMessage2 + host);
Orblink1[q].SetIdentity(className + "2", objectName);
Orblink1[q].start();
} //close try
catch(Exception e)
System.out.println("error in checkmorbavail" + e.getMessage());
}//close catch
}//close if
try
Thread.sleep(30000);
catch(Exception e)
System.out.println("errror here");
checkTmAvail();
return 1;
*<p>method to register with the Orb and send a message to its TestManager. If successful sends
* initial message consisting of the ip address of the TestPc plus "tm" attached to the end.
* Used to check whether the TestManager software is running on that machine</p>
*@param pc takes a TMHealthStatusTestPc object as argument
public int checkTmAvail()
for(int r = 0; r < count; r++)
if(TestPcContainer[r].getMorbValid() == 1)
host = TestPcContainer[r].getIp();
if(counter != 1)
Orblink2[r].XYRMIMessageHandler(initialMessage3 + host + "tm");
else
try
Orblink2[r] = new XYRMIClient(this, host, port, initialMessage3 + host + "tm");
Orblink2[r].SetIdentity(className + "3", objectName);
Orblink2[r].start();
catch(Exception e)
System.out.println("error in checktm is " + e.getMessage());
else
System.out.println("not valid");
try
Thread.sleep(1000);
catch(Exception e)
doSomething();
StatusRequestTimer();
return 1;
*<p>method to create a new XYRMIObjectInterface to handle incoming messages. Checks to see
*whether the incoming meesage has the method name of the ipaddress of each tm meaning that its morb
*has been successfully registered with. Also checks to see if the method has the method name of
*the ipaddress of the tm plus "tm" attached to the end, meaing that the tm has successfully received
*the message and is returning with conformation. </p>
*@return int
*@param s Takes as a parameter a string
public synchronized int XYRMIMessageHandler(String s)
XYRMIObjectInterface msg = null;
XYRMIObjectInterface msg1 = null;
msg1 = new XYRMIObjectInterface(s);
if(msg1.IsMethodName("RequestTestManagerStatus"))
System.out.println("got requesttestmanstatus, sending rmi");
sendRMI();
else
for (int i = 0; i < count; i ++)
msg = new XYRMIObjectInterface(s);
try
if(msg.IsMethodName(TestPcContainer[i].getIp()))
TestPcContainer[i].setMorbValid(1);
System.out.println("setting morb valid");
if(msg.IsMethodName(TestPcContainer[i].getIp() + "tm"))
TestPcContainer[i].setTmValid(1);
System.out.println("setting tmvalid");
catch(Exception e)
System.out.println("message in xyrmimesagehandler is " + e.getMessage());
return 1; -
HEEEEEELP
Make sure tha on the Keyboard it is turned up all the way. Make sure that on the Movie or the CD that the sound is turned up all the way. Make sure that in the System Preferences that under the sound you have the sound turned up in the preferences. One of these should be your issue.
-
The situation I would like is to have a library of step types which sequence developers can use. Therefore if new step types need to be added, or existing ones modified - all that needs to be done is to roll out a new MyTypes.ini (for example), and the code modules/substeps.
Scenarios:
If I create types in MyTypes.ini (make sure "Attach to this file" is checked, so they get saved here). I can then create a sequence file using these step types. No problem so far.
I can open the type palette, modify the step properties, and save. When I go back to my sequence file an asterisk appears (saying it needs to be saved, even if I have opened it from scratch). The properties have been updated to reflect what is in the Type Palette. Still no problem (Type versions are the same in the sequence file and type palette).
This is where the problem appears:
If I change a step type (in the Type Palette) from using a code module to using a Post-Step substep instead (changing the module adaptor to "None") - any instances do NOT update when you open sequence files. (The same happens vice versa also).
Please note that the "Type version" listed in the sequence file DOES match that listed in the Type Palette - the properties are the same but the manner in which the code modules are called is DIFFERENT! This then can lead to to runtime errors if the old code module has been deleted for example.
The only way around this is to open EVERY sequence file that contains an instance of the step type, and make sure that you have "Apply changes to all loaded instances of this type" checked in the step type properties dialog. This is is not a good solution since files could be missed, and is very time consuming if you have hundreds of sequence files!
What I need is that the Type Palette on any particular station contains the MASTER copies of each type. These are loaded whenever a sequence file is loaded and NOT retreived from the sequence file. As discussed above this seems to work when you modify properties - but doesnt work fine if you change the way in which code modules are called.
Am I doing something wrong or is this a limitation?I had a system recently containing seven sequence files, approx 20 subsequences in each, and around 10-20 steps in each sub-sequence. Every step (except for the NI non-code module types) was an instance of a step type.
Each one of these steps had an Edit sub-step and a code module called through the code module adapter.
In order to make these into "wrapped up" step types it was decided to move the code module to a Post-Step substep (as also done in the NI-IVI step types) - so that developers cannot fiddle with the code prototype or module.
In order to do this I had to open all 7 of the sequence files, make the changes and then ensure that "Apply changes in this dialog to a loaded instances" was checked. This seems to sort of work, but some steps started causing Error 17502 (System Error) when you configure them (call the Edit substep). Over the course of the past few months I have had to effectively check every instance of a type to see if it works (deleting the step and replacing it when it doesnt). Other strange things happened like some of the step type instances now have the "None" (adapter) icon associated with them - but both still work.
The idea of creating a type-def of a step type is a good one, but frustrating that it doesnt seem to fully work. Why should the sequence file also store a version of the step-type - which is what is effectively causing this problem - why not make it so that if you dont have the step types installed in the type palette - TOUGH! Message Edited by RichM on 03-15-2005 06:55 AM -
I have a home computer with purchased itunes music and I want to transfer to my Iphone - how can I do this (syncing doesnt seem to work
Syncing is the only way. Explain what you mean by "doesn't seem to work." Exacty, what did you do and what happend.
Are you sure your iPhone is signed into the same iTunes Store account as iTunes on your computer? -
I have an Ipod touch and recently added new music to my Itunes library. When I sync with the library, the new music does not show up on my ipod. The sync process seems to be working and there is still plenty of space on the Ipod for new music so I'm not sure what the problem is!
What happens when you try to sync?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
Do the songs play in iTunes?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Do you have any Restrictions (Settings>General>Restrictions) set that would prevent syncing those songs? -
I have a new ipad and everything works but can't connect to the app store. Itunes works and the wifi seems to be working but i get a blank white screen when i open the appstore. Nothing will load unter the features or charts tab so i cant download any apps. Purchased and updates tab loads fine. Any suggestions?
You would get better response from the iTunes community forum.
Have a nice day!
Maybe you are looking for
-
Raid 1 error message with ASC: 0x11, ASCQ: 0x0, FRU: 0xf
Dear All, There is a error message with ASC: 0x11 (unrecovered read error), ASCQ: 0x0, FRU: 0xf And I reference the documentation at http://docs.oracle.com/cd/E19105-01/storedge.6320/817-5918-10/817-5918-10.pdf The error messages means: "The RAID con
-
Call of duty 4 update lose all stats?
when you update the call of duty 4 from the mac app store will you lose all your progress and start from scracth?
-
I lost the Bluetooth feature on my MacBook.
I recently had huge problems with my MacBook that required going to the Apple store 3 times in one day... Anyway I got all of my problems fixed BUT now I look at the bar on the top of my screen and there is a line through the Bluetooth icon. As seen
-
Hi Friends, I want to build a report based on <b>ALVs</b> and also like a <b>Interactive reports</b>. Eg: First I want to display customer details in first <b>ALV Grid</b>. IF the user click on the <b><u>Cust No</u></b> the next screen should shown t
-
HT4597 Is iCloud free? There is no pricing info anywhere!
I iCloud free? I cannot find any pricing info anywhere. I cannot contact support through the Apple site and the transition from .me to iCloud link is broken. In Australia we have consumer laws that compell businesses to provide this information. Dadd