ITunes track on ipad not in order after update

iTunes LP not in numbered order after iPad update. Checked if shuffle mode was the issue but seems not to be the problem.

I Had the same issue. I spent a good couple of hours talking to iTunes support last night about it. All they could say was that iTunes extras are only available on iTunes and Apple TV.
this morning I had to erase all the content from my iPad and the restore it from an iCloud back up. When the back up was restored the extras were available on my iPad. Might just be a coincidence.

Similar Messages

  • ITunes cannot detect iPad Mini with Retina after update to Version 11.1.4.62

    I am using Windows 8.1.
    Just updated my iTunes to 11.1.4.62.
    After update, iTunes will not recognize my iPad Mini with Retina (but it shows up on My Computer in Windows Explorer).
    I tried the Run Diagnostic and did the suggested solutions.
    Still did not work.
    Please help!!!!

    Found the answer....
    Please follow this link....  Works GREAT for me!!!!
    Thx GCK55.
    https://discussions.apple.com/message/24619760#24619760

  • Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

    updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall press on)
    Bonjour
    Apple Application Support
    Still getting same error message. Can anyone help me

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    tt2

  • My ipad will not power on after update. I have tried connecting to computer which doesn't recognize it. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload and am afraid it 'crashed'

    My first genteration ipad will not power on after update. I have tried connecting to the authorized computer which won't recognize it - does not acknowledge a device is plugged in. I have pushed top and circle buttons at same time. It had a battery charge before it died.  I tried to stop the upload midway and am afraid it 'crashed'

    Try putting it into recovery mode.
    Connect iPad to your computer via USB while it's turned on.
    Open iTunes
    Hold the iPad's Sleep/Wake switch (power button on the top of the iPad) down until the "power off" slider appears.
    Power off the iPad completely (wait for the progress spinner to disappear).
    Hold the Sleep/Wake switch AND the Home button down for a full 10 seconds.
    After 10 seconds (the second time you'll see the Apple logo on the screen) release the Sleep/Wake switch while still holding the Home button.
    Continue to hold the Home button for another 10 seconds until the USB connection image appears on the iPad's screen, then release the Home button.
    A pop-up message will appear on iTunes saying it has detected an iPad in recovery mode, you must restore...
    Click on the "Restore" button and the process will begin.

  • How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?

    Question to all iPad users please help in this issue
    How to solve the problem of connecting my iPad to Itunes while my iPad not working and show to connect to iTunes?
    Thank you for help out.

    Hi Jamalzoal,
    Dose your computer have the most recent iTunes on it? When you connect the iPad 2 to your computer what happens? dose iTunes tell you the iPad need to be restored?
    p.s. you post this question in the Apple Remote Desktop community. You would probable have gotten more an fast responses if you posted this in the iPad community.

  • IPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

    iPad 2 problem. After updating to IOS 8.0.2 iPad says that I need to plug into iTunes. When I do that, the only option is to restore iPad to factory settings? iPad will do nothing until then. I have never had this problem before. Help

    Hi ..
    Follow Apple's instructions for recovery mode here >  iOS: Unable to update or restore
    You can restore from a backup.

  • HT4623 itune is not showing iphone after updateing to IOS6

    itune is not showing iphone after updateing to IOS6

    Have you tried the Basic Troubleshooting Steps...
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
    Be sure to make an appointment first...

  • ITunes finds my iPad over wifi but after a few seconds it disappears. What should I do?

    iTunes finds my iPad over wifi but after a few seconds it disappears. What should I do?

    Hi there,
    You may find the troubleshooting steps in the article below helpful.
    iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi Syncing
    http://support.apple.com/kb/TS4062
    -Griff W.

  • Ipad not clearing memory after movie erased

    Ipad not clearing memory after movie erased. Any fixes out there?

    I did both a soft and hard reset. I just wanted to know if I am going to have to do this every week after my kid loads movies and erases them. It seems this is a major flaw in 7.03 and needs to be rectified.

  • Both iPod and iPad won't connect after update.

    Both iPod and iPad won't connect after update.  iTunes says "can't allocate a resource"

    I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
    Follow these steps to reset the Lockdown folder:
    Disconnect all iOS devices from your computer and quit iTunes.
    From the Finder, choose Go > Go to folder.
    Type the following and then press Return:
    /var/db/lockdown.
    The Finder window should display one or more files with long alphanumeric file names.
    In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
    Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
    Reconnect your iOS device and open iTunes
    My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

  • First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    First off, i think it's sad that i have to use my non apple device to post this question... Why has my iPad become absolutely useless after updating to iOS 8.1? I am unable to use my mini because it crashes, slow performance, major battery drain.

    Restore iPad to Factory Default; do not restore from backup. It may be the cause of the problem.
    Settings>General>Reset>Erase all content and settings

  • Why itunes failed to install apps on iphone after update to ios 6.0.1? And how to restore my purshased apps from itunes?

    Why itunes failed to install apps on iphone after update to ios 6.0.1? And how to restore my purshased apps from itunes?

    See:
    Frequently asked questions about viewing and syncing video with iTunes and iPod
    Why can't I transfer videos to my iPod?
    iTunes: May be unable to transfer videos to iPhone, iPad, or iPod

  • HT4623 Why does my IPad not have a Software Updates button in my General tab?

    Why does my IPad not have a Software Updates button in my General tab?

    The Settings > General > Software Update option only appears when you have iOS 5+ installed, if you have iOS 4 then you will need to do the update via your computer's iTunes.
    To update, connect the iPad to your computer's iTunes and copy any purchases off the iPad to your computer via File > Transfer Purchases. You may also want to copy photos and any important documents off the iPad as well e.g. via the file sharing section at the bottom of the device's apps tab when connected to iTunes, via wifi, email, dropbox etc - they should be included in the backup, but it's best to have a copy of them outside of the backup just in case. You can then force a backup of the iPad by right-clicking the iPad 'Device' on the left-hand side of iTunes and selecting 'Backup'.
    Then start the update by selecting the iPad on the left-hand side of iTunes, and on the Summary tab on the right-hand side clicking the Check For Updates button
    Updating to iOS 5+ : http://support.apple.com/kb/HT4972
    Your iPad should be updated to iOS 6.0.1 (which is the only version that is 'signed' by Apple), so you will lose the built-in YouTube app and the Maps app will change - though google do have app versions in the store

  • Unable to tether my iPad to my iPhone after updating both devices to ISO 7.1 both devices worked prior to the update

    unable to tether my iPad to my iPhone after updating both devices to ISO 7.1 both devices worked prior to the update

    For dial up connections axmung other things. I have not been successful with the Bluetooth (pairng )

  • The front camera of my iPad 3 doesnt work after updated  ios7

    The front camera of my iPad 3 doesnt work after updated  ios7

    Have you tried closing the Camera app completely and seeing if it works when you re-open the app ? From the home screen (i.e. not with Camera 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Camera app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    If neither fix it then you could try contacting Apple.

Maybe you are looking for

  • SAP MII 14.0 Tag Query Findings

    Hi Everyone, We has just migrated from 12.2 to 14.0 MII, we did not got any issue in BLS or any Queries. The only issue we faced was the tag Query. So, after migrating from 12.2 to 14.0 we need to re load the Tag query and save it after migration to

  • I have an apple i tunes account and now I want to set up my daughters new ipod and another, but how do I get the account to recognise 3 ipods?

    I have an apple i tunes account and now I want to set my daughters i pod on my account as well, but the account only seems to recognise one ipod when i want it to recognise 3

  • Bit of a problem need some help please

    import java.io.*; class IO public static void main(String args[]) String sOutString = ""; int iRecordLength = 0; int iWork=0; int[] array = new int[21]; try // creat input file, buffer. FileInputStream fis = new FileInputStream("myInFile.txt"); Buffe

  • Modify object fo material document

    Hi all,        I'm looking for a modify object for a material document in order to start a workflow based on BUS2017. Someone knows which is the standard modify object? Thank you.                         Gino Bonfiglioli

  • Import dataObject problem

    I try to import dataObject like this. var myDoc = event.target; myDoc.importDataObject("myData", "person.xml"); But I get the following warning. Exception in line 2 of function top_level, script XFA:person[0]:initialize NotAllowedError: Security sett