ITunes U Browser Issues with Authentication
We have had iTunes set up for a while and has worked well up until yesterday. If you click on the following link
http://www.aacc.edu/sp/itunes/ifpod.cfm
it will not work with IE. It only works with FireFox.
I keep getting the following error:
Error: 'isNotIE' is undefined
Please help.
Thanks.
Thiha
Windows XP Pro
A couple of items down, in this forum, you'll see an item that reads something like "Urgent---unable to access iTunes U from a PC." Read that thread all the way through to the very end. At the very end of the thread, Apple Duncan explains the problem.
MacBook Pro Mac OS X (10.4.8) I lied. I'm running Leopard
Similar Messages
-
An issue with authentication and authorization on ISE 1.2
Hi, I'm new to ISE.
I have an issue with authentication and authorization.
I have ISE 1.2 plus patch 6 installed on VMware.
I have built-in Windows XP supplicant and 2960 cisco switch with IOS c2960-lanbasek9-mz.150-2.SE5.bin
On supplicant I use EAP(PEAP) with EAP-MSCHAP v2.
I created authentication and authorization rules with Active Directory as External Identity Source. Also I applied authorization profile with DACL.I login on Windows XP machine under different Active Directory accounts. Everything works fine (authentication, authorization ), but only for several hours. After several hours passed , authentication and authorization stop working . I can see that ISE trying authenticate and authorize users, but ISE always use only one account for authentication and authorization . Even if I login under different accounts ISE continue to use only one last account.
I traied to reboot switch and PC,but it didn’t help. Only rebooting of ISE helps. After ISE rebooting, authentication and authorization start to work properly for several hours.
I don’t understand is it a glitch or I misconfigured ISE or switch, supplicant?
What should I do to resolve this issue?
Switch configuration:
testISE#sh runn
Building configuration...
Current configuration : 7103 bytes
! Last configuration change at 12:20:15Tue Apr 15 2014
! NVRAM config last updated at 10:35:02 Tue Apr 15 2014
version 15.0
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname testISE
boot-start-marker
boot-end-marker
no logging console
logging monitor informational
enable secret 5 ************
enable password ********
username radius-test password 0 ********
username admin privilege 15 secret 5 ******************
aaa new-model
aaa authentication dot1x default group radius
aaa authorization network default group radius
aaa authorization auth-proxy default group radius
aaa accounting update periodic 5
aaa accounting dot1x default start-stop group radius
aaa server radius dynamic-author
client 172.16.0.90 server-key ********
aaa session-id common
clock timezone 4 0
system mtu routing 1500
authentication mac-move permit
ip dhcp snooping vlan 1,22
ip dhcp snooping
ip domain-name elauloks
ip device tracking probe use-svi
ip device tracking
epm logging
crypto pki trustpoint TP-self-signed-1888913408
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1888913408
revocation-check none
rsakeypair TP-self-signed-1888913408
crypto pki certificate chain TP-self-signed-1888913408
dot1x system-auth-control
spanning-tree mode pvst
spanning-tree extend system-id
vlan internal allocation policy ascending
ip ssh version 2
interface FastEthernet0/5
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication open
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/6
switchport mode access
ip access-group ACL-ALLOW in
authentication event fail action next-method
authentication event server dead action reinitialize vlan 1
authentication event server alive action reinitialize
authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer reauthenticate server
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
interface FastEthernet0/7
interface Vlan1
ip address 172.16.0.204 255.255.240.0
no ip route-cache
ip default-gateway 172.16.0.1
ip http server
ip http secure-server
ip access-list extended ACL-ALLOW
deny icmp any host 172.16.0.1
permit ip any any
ip radius source-interface Vlan1
logging origin-id ip
logging source-interface Vlan1
logging host 172.16.0.90 transport udp port 20514
snmp-server community public RO
snmp-server community ciscoro RO
snmp-server trap-source Vlan1
snmp-server source-interface informs Vlan1
snmp-server enable traps snmp linkdown linkup
snmp-server enable traps mac-notification change move
snmp-server host 172.16.0.90 ciscoro
radius-server attribute 6 on-for-login-auth
radius-server attribute 6 support-multiple
radius-server attribute 8 include-in-access-req
radius-server attribute 25 access-request include
radius-server dead-criteria time 5 tries 3
radius-server vsa send accounting
radius-server vsa send authentication
radius server ISE-Alex
address ipv4 172.16.0.90 auth-port 1812 acct-port 1813
automate-tester username radius-test idle-time 15
key ******
ntp server 172.16.0.1
ntp server 172.16.0.5
endYes. Tried that (several times) didn't work. 5 people in my office, all with vers. 6.0.1 couldn't access their gmail accounts. Kept getting error message that username and password invalid. Finally solved the issue by using Microsoft Exchange and "m.google.com" as server and domain and that the trick. Think there is an issue with imap.gmail.com and IOS 6.0.1. I'm sure the 5 of us suddently experiencing this issue aren't the only ones. Apple will figure it out. Thanks.
-
iTunes keeps telling me my debit card is declined, when I am trying to use an iTunes card that I added today. The amount from the iTunes card shows on the account.
You need to fix the issue with the credit card on the iTunes account or you can remove the credit card.
-
Latest 12.1.1.4 itune updates has issues with syncing to iPhone 6 Plus
I was one of those folks wary of upgrading to iTunes 12 at first but once I did I actually liked it. I especially liked the fact that my frequent syncing problems seemed to have gone away.
Sadly, these problems came back with 12.1.1.4. For the life of me, the latest iTunes version would not recognize my iPhone 6 Plus or it did but when you tried to apply a sync, it lost visibility of my phone.
In exasperation I tried to get the older version from the Apple Website but for reasons that boggle my mind, they no longer had the 64 bit version of 12.0.1. Only the 32 bit version which would not install on my 64 bit Windows 8 OS.
I was able to find a 64 bit version of 12.0.1 on some other site I found while googling (and this is why I have a virus checker. :-P) and re-installing that worked great. As soon as I ran it, it recognized my iPhone and I could sync like a fiend.
Has anyone come across this issue with 12.1.1.4? I am staying pat with 12.0.1 until Apple fixes the issue.
I know that bugs will happen in software but given the level of importance of syncing ones phone, this really is a feature that needs to be rock solid. Not only that, but the older versions of the software really need to be properly available on the Apple Web site.
IanHello Mirochi,
I am sorry to hear you are having these issues with your iPhone 6 Plus. If you continue to have issues with a looping Trust notification, you may want to try resetting the Lockdown folder, as outlined in the following article:
iTunes: How to reset the Lockdown folder - Apple Support
If you have further issues with your iPhone not being recognized in iTunes, you may find the troubleshooting steps outlined in following article helpful as well:
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Sincerely,
- Brenden -
Browser issues with Silverlight
I've been trying to sort this for ages, but with no luck.
If I run BTSport in Chrome or Firefox, everything is generally ok, but the video frame rate seems slightly off. The picture is ever so slightly jerky.
In IE10 the video is smooth as silk, but the sound is a terrifying mess. The first quarter second or so of the video's sound is looped ad infinitum.
At the moment my work around is to run two streams, one in chrome, minimised, but with the sound on, the other in IE, for a smooth picture. Obviously that's not ideal as the two aren't exactly synced, but I can live with it for football.
Does anyone have any suggestions for smoothing the video in Chrome, or fixing the sound fault in IE10?
For info, I'm running a Haswell Core i7 with 16GB of RAM so it's not a performance issue with the hardware. The sound fault occurs whether I use the onboard Realtek sound, or HDMI sount out into my AV Amp (via my GTX680 GPU) and when I use a USB connected external FiiO DAC, so I don't think it's sound driver or hardware related.
Chrome, Firefox and Silverlight have all been reinstalled and are at their latest versions. There is no other audio 'enhancement' software running, and I have tried disabled enhancements in control panel for all three audio options.
So I'm pretty stuck (and hating Silverlight).
For info, the exact same problems occur when using other Silverlight videos.I just checked my IE and I find I'm running IE 11 on Windows 7. You're right - it runs BT Sport a lot smoother than Chrome or Firefox, thanks for the tip.
To say thanks for a helpful answer, please click the white star -
My ipod downloads songs from itunes and plays them just fine. However, when I added my songs from my CD's to it, they downloaded but don't play like they should. They either don't play at all or randomly play in the middle of the song. It has nothing to do with the start time either because they all say that they start at 0.00. I synced the CD's correctlly, so that is not the issue. The songs from the CD's never start playing when I choose them. What can I do to fix this issue?
Have you looked at the discussions on the right side of this page under the heading "More Like This" with your same problem?
-
IE Browser Issue with Spry Menu Bar {screen-capture attached}
Hi there, my horizontal spry menu bar is messing up when viwed in Internet Eplorer, HTML shows no errors, after extensive testing still cant find a solution. As you will be aware IE is a popular browser so its imperative i resolve the issue. The site is http://www.theboxinghistorian.com/
View in Chrome and Firefox
View in Internet explorer (IE)
Here is the HTML code
Hope this is enough information for a solution.
Thank you for your time
MarkI've never used Spry, so take this with a huge grain of salt.. looking at your html, I am kinda wondering how come the 2nd level of the nested list items making up your submenu items arent assigned a different css style - and therefore is your css file setup to handle this change in orientation properly..
You got a class=MenuBarSubItem" on your Championship History, but theres nothing in your html (other than the nested ul within #Menubar1) to indicate that Heavyweight, Cruiserweight, etc. are 2nd Level MenuItems which should be using a different css style.. therefore it would be up to your CSS to handle this change in how these 2nd level sub menu items gets displayed.. looks like this isn't happening for MSIE, as MSIE keeps floating your 2nd level/submenu items horizontally instead of stringing them up vertically.. You may be missing a style rule in your css, but how come FF gets it right?
If I were to recreate this menu myself, I would assign a new css class to make sure my submenu items dont end up floated next to each other.. But then again, i have no clue about Spry, so I might just be rambling nonsense here... -
Issue with authenticating a user in OBIEE Application
We have few users all of which are able to authenticate themselves in the QA Environment. When we moved the webcatalog from DEV to QA one of the users named CAROLAIG stopped geting authenticated and hence couldnot enter in to the system. We tried deleting the CAROLAIG and CAROLAIG.atr from the Users folder present in the wecatalog but it did not help. The issue is coming up after the webcatalog migration. We are failing to understand how the webcatalog controls the authentication mechanism and make this happen. All the other users continue to work perectly.
The OBIEE version used is 11.1.1.5. The complete webcatalog migration from dev to QA has been done.
Edited by: 925099 on Jul 10, 2012 4:56 AMHi,
Its not the catalog which takes care of authentication but its the OPSS. In OBIEE, the catalog and .rpd hold the GUID of the users in the OpenLDAP of weblogic (If not integrated with any other authentication mechanism). The GUID from the Active Directory is always cross-checked with the one stored in catalog and .rpd during authentication.
So, in your case too the GUID (old one that was got from QA LDAP) might have conflicted with the new one from the production environment and hence the user fails to be successfully authenticated and hence needs a refresh.There are some steps to refresh the GUID in your case in oracle documentation.
Hope this helps.
Thank you,
Dhar -
Am I the only one that is having issues as of the latest versions in the browser.
When I create a new version the stack that I am working on Jumps to the top which is a real pain.
The ordering of the stacks doesn't seem to take and I have to reload
Why is it when cropping pictures Aperture looses focus of which picture you are working on in the browser?
ChrisHi,
I have the EXACT same problem when viewing Webhelp through Firefox. Like you, webhelp does not display the left TOC panel 100% and displays scrollbars, even when expanded. I uninstalled it, upgraded, and did whatever I could to get my file to display the TOC correctly in Firefox.
On an interesting note, the left panel displayed correctly during a quick test using other computers; I just assumed it was something with my computer. I currently generate the output as DHTML > Pure HTML.
I'm sorry I can't give you a solution, other than to acknowledge the same issue still occurs with me using FF: http://forums.adobe.com/thread/586176 . It displays okay in IE8, not in FF 3.6.3. -
I have just installed Lion and since then when I browse the internet about 10 times a minute Safari tells me it cant open the web page because the computer is not connected to the Internet. When clicking on the refresh button it loads the page. This is incredibly annoying and I know my Internet router is ok and the Internet connection is constant. I have a seperate laptoopn running Windows Vista and I am getting no error messages regarding Internet connection when browsing. Is this a known bug with the new Lion OS?
I'm using Safari 6 and Apple Airport Extreme as a router (DNS server) which uses OpenDNS so there shouldn't be any DNS issues especially since Google Chrome never has an issue.
-
I just had my E7-00 reflashed in Helsinki, Finland where it was originally purchased. Everything now works fine except web browsing. I am not in a city centre, but have 4 bars of reception and yet the Symbian browser takes an absolute age to load anything up and the Opera mobile browser as well. A friend with a iPhone using the same network has almost instant browser page loading. Is there anything I can do to speed up my E7 or to deal with medium strength reception conditions?
I know Anna is supposed to have a new Symbian web browser, but can anyone report on how it performs in medium strength reception conditions, and is it any faster than the original browser?Hi,
I have the EXACT same problem when viewing Webhelp through Firefox. Like you, webhelp does not display the left TOC panel 100% and displays scrollbars, even when expanded. I uninstalled it, upgraded, and did whatever I could to get my file to display the TOC correctly in Firefox.
On an interesting note, the left panel displayed correctly during a quick test using other computers; I just assumed it was something with my computer. I currently generate the output as DHTML > Pure HTML.
I'm sorry I can't give you a solution, other than to acknowledge the same issue still occurs with me using FF: http://forums.adobe.com/thread/586176 . It displays okay in IE8, not in FF 3.6.3. -
ITunes 12 compatibility issues with IOS 7.1.1
I downloaded ITunes 12 last week. I tried to sync my IPhone 4S that has IOS 7.1.1 on it to my laptop with ITunes 12 on it and it won't recognize the device even if it is plugged into the laptop. I need to back up my phone. All of my music from my playlist that was on the IPhone was backed up to the laptop when I downloaded ITunes 12 but nothing else synced. How do I solve this issue?
ShannonHi Sterling,
I'm not using a MAC. I'm using a Windows PC.
I've tried restarting both the IPhone and the PC.
I have the most recent update to ITunes installed on my PC.
I have removed ITunes 12 and re-installed it.
I have deleted the Lockdown folder.
I have tried working through the steps that others have found useful on the support forum like installing the relevant drivers for my 64 bit laptop.
I have updated all of the latest software updates for Windows for my PC.
I have ensured that my phone is listed as a managed device on my ITunes account.
I have reset my network settings on my IPhone.
My usb cable and my usb port on the laptop both work. I did initially sync my IPhone to the laptop using ITunes 11. When ITunes asked me to update it on March 10th, I should have declined the update.
I haven't been able to back up my IPhone or sync it to ITunes since.
Is there any other software that I need to download to make ITunes 12 work? This program does not launch when I plug in my devices (unlike every other version of ITunes).
Thanks!
Hopefully, you can suggest something else for me to try. -
Captivate 8 browser issue with HTML 5 published course
Hi, I'm troubleshoot a new issue. I have published a responsive course in HTML 5 and posted it to our LMS. The course played fine last week in Chrome but now seems to have a few issues. I wanted to know if anyone had any ideas if it's a browser compatibility issue or possible more to-do with the course publish settings. The course doesn't automatically play anymore. I have to click play on the playbar to start the course, the videos are slower, and the click boxes are not clickable.
Any ideas?You may want to check out Jim's solution here.
http://captivatedev.com/2014/07/20/html5-captivate-projects-freezing-google-crome-v-36/
Sreekanth -
EPM Version - 11.1.2.3.500.7
We have 3 domains and users are authenticated via the Active Directory, the users of all the domains are able to log on to EPM except one Domain.
What may be the reason?
The setup was running fine for the last x months and suddenly we see this issue.
Did anyone encounter this kind of Issue? Any help ?
1) The Error what the users get :
EPMCSS: 00301: Failed to authenticate user. Invalid Credentials. Enter Valid Credentials
2) Error Admin gets when he is trying to search the users in shared services Error what Admin gets :
EPMCSS:00706: Failed to get users from user directory xx. Error getting connection from connection pool, Verify user Directory Configuration.
Thanks
RK.We encountered this issue when the User DN's password was changed or when the id was moved to a different folder within Active Directory.
-
Upgrade from 10.6.8 to Mavericks server: issue with authenticated bind
Hello, I have tried upgrading a 10.6.8 server to 3.1.2 Mavericks server and found I can't bind 10.9.x clients.
I need to keep using authenticated bind to manage clients in Workgroup Manager
I have exported the 10.6.8 OD database and imported into a clean installation of Mavericks 3.1.2 server and everything went fine that far.
I then noticed that authenticated bind in Mavericks now requires SSL and the certiicate.
Once I have imported the 10.6.8 OD database into the new server (same name and IP), only the selfsigned certificate coming from the 10.6.8 server is being imported and OD service remains "unprotected" without any certificate assigned (it seems I can't change this)
The problem is I can successfully bind 10.8.x clients against the 10.9 server while this seems not to be possible with 10.9.x clients when using authenticated bind.
If I create a new OD domain, there's an intemediate certificate assigned by default and I can bind 10.9.x clients (authenticated bind).
Am I missing something obvious?
Many thanks for your help
Cheers
CarloHello and many thanks to all for your hints
@Strontium90 I am aware I should move to profiles and I am working towards this goal, but I had mixed results as far as reliability here.
Anyway, I took my time to perform the upgrade once again from scratch and it's defenatly something related to certificates
The only way to (authenticated) bind a 10.9 test client is when I create a new OD domain and the server uses the intemediate certificate that it's automatically created and assigned to OD service
Using the sefl-signed certificate (the existing one - that is imported along with the OD DB - or a new one assigne to it) does not work with the imported DB.
This is the error I get when I try to bind with dsconfigldap
iMac-di-admin:~ admin$ sudo /usr/sbin/dsconfigldap -vsemgx -a my.ODserver.FQDN.com
Password:
dsconfigldap verbose mode
Using suggested computer ID <imac-di-admin>
Options selected by user:
Enforce Secure Authentication is enabled
SSL was chosen
Add server option selected
Server name provided as <my.ODserver.FQDN.com>
Computer ID provided as <imac-di-admin>
Local username determined to be <root>
Enforce man-in-the-middle only policy if server supports it.
Adding new node to search policies
Enforce packet encryption policy if server supports it.
Enforce packet signing policy if server supports it.
Certificates will be automatically added to your system keychain in order to talk to this server.
Would you like to continue (y/n)? y
Error: Description unavailable (9006)
While this is the error I get from Directory Utility
I think I'll seek support from a consultant... ...it all seems beyod my skills
Many thanks again!
Carlo
Maybe you are looking for
-
When I attempt to Extend a PDF document via my LiveCycle server I get the error"Application Alert" The file could not be saved. Are you sure you want to lose your results? I can login fine via this address. http://[Server Address]:[Port Number]/Reade
-
Mac connected but PC can't connect to internet through Airport Extreme
When I was using a dial-up connection everything worked fine on both computers but since I changed to a PPPoE / Ethernet connection my PC using Windows XP can't connect to the internet although is connected to the Airport with excellent signal. In Sy
-
Engineer to Order Scenario-Target Costs and Stock Valuation
I have got a query pertaining to Engineer to Order Scenario. A production order has been created with WBS element as the account assignment .Its a valuated project stock scenario, with configurable material. As per SAP standard behaviour and my li
-
How do I get access to my backed up data in the iCloud?i
How do I get access to my backed up data on the cloud?
-
Where is the FAQ section?
With the new setup of the forums, I have difficulty finding the FAQ section, as well as the Featured Discussion section. Where have they gone and how can we retrieve them? There are a number of posts in older threads that specifically link to them or