Itunes U not pulling description from RSS

https://deimos.apple.com/WebObjects/Core.woa/BrowsePrivately/indiana-public.1798 887988
If you don't have description enabled in iTunes, right click, and select it. It is blank. The RSS is valid, and it includes the description.
http://podcast.iu.edu/Portal/GetFeed.aspx?podid=faadf42d-4af7-4f1a-899b-2c0fc59d cdbf

Hello there Rorox89,
It sounds like your iTunes U app is not functioning correctly.
I want to recommend first, closing all the running apps on the device.
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app's preview up to close it.
From: iOS: Force an app to close
http://support.apple.com/kb/ht5137
Then restart your phone and try again.
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
Thank you for using Apple Support Communities.
Regards,
Sterling

Similar Messages

When I was talking on phone, suddenly the phone was switched off. i tried to switch it on but it gave the message....connect to itunes for set up. when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it

when I was talking on phone, suddenly the phone was switched off.
i tried to switch it on but it gave the message....connect to itunes for set up.
when I connected it to itunes...it gave the message, itunes can not read data from this iphone, restore it to factory settings. It also said while restoring ypu will lose all media data but you can restore the contacts.
I restored the factory settings....the phone was on recovery mode...it was verified by itunes and all that..but in the end it again said that iphone has some problem and can not function right now.
after that when ever i connect it with itunes, it gives the message, it can not activate the iphone further, try again later or contact customer service.
What to do now?????? Customer service people say..it is hardware problem

If it's a hardware problem, then the phone will need to be replaced.
There is no magic that can fix a hardware problem.

What do i do when Itunes says "Itunes could not load data from sync services reconnect or try again later

Hi, just recently when I attemted synced my ipod touch 5th generation, i got a message saying
"Itunes could not load data from sync services reconnect or try again later
I am running the latest version on itunes (not quiet sure which specific one)
I am running ios 6.1 my ipod is not jail broken
don't know what to do
I then cleard the message and my ipod showed up and began to sync
however it is staying at the backing up stage for 12 hours
Not sure what to do help!

Try:
iTunes for Windows: "Unable to load data class" or "Unable to load provider data" sync services alert
"load data class"

QM Notification: task end dates not pulled through from response profile

Hello,
I am experiencing a problem with the end dates of the tasks in QM notifications not pulling through (from the response profile) when tasks are determined.
When I do the simulation of task determination, the gantt chart shows all the tasks together with the end dates. But when the actual determination is done these dates are not populated in the planned finish date fields.
I have double checked the configuration: priorities, response and service profiles are set up correctly. I have also searched SAP notes without success.
I thank you in advance for your responses.
Kind regards,
Theo.

Yes, I know, but as far as I understand binding the values back from rule to the workflow is something that doesn't work. I have never tried it, but I have seen posts here about people complaining that this kind of binding does not work.
Have you tried to bind for example some hard coded value back to the workflow (something that should definately work)? Does it work? If not, I suggest you to ask this from SAP that is it supposed to work and if not, why do they have this option to for binding from rule to workflow. Or then just forget what you are trying, and use some of the suggested workarounds.
Regards,
Karri

Itunes v12.1 itunes will not sync photos from photoshop 12

Since I downloaded itunes v12.1, itunes will not sync photos from Photoshop 12 to my iphone 5, 6+ and older Apple TV (with hard Drive). Prior to the itunes software update, all was well. itunes indicates "0" photos available from Photoshop when there are over 7,000 photos on my desktop. I tried uninstalling itunes and reinstalling - no success. Perhaps itunes v13 may fix the problem, meanwhile , any suggestions.

I link to it in th epost above yours.
http://www.iphonehacks.com/2013/09/download-itunes-11-1.html
Scroll down to;
Then click Mac, or whatever one is applicible to you.
Be warned though. After synced, successfully, with iTunes 11.1, i ended up with over 10GB's of 'Other' data on my iphone. I had to do a factory reset (From iTunes/iPhone/Summary). It's been a pain in the ***, but it all seems fine now. But it has taken me hours. An di now have a headache.
Also, a factory reset will remove ALL your data, and i mean EVERYTHING! You've spend the rest of the day putting everything back the way you like it, and setting up all your setting again.
Pain in the ***.

I have been attempting to submit my podcast to the Apple iTunes directory. iTunes will not accept my podcast RSS feed.

I have been attempting to submit my podcast to the Apple iTunes directory.
iTunes will not accept my podcast RSS feed.
Apples Response: "We had difficulty reading this feed. Invalid document."
Apple provides a link to: FEED Validator (FOR ATOM AND RSS AND KML)
Here is Feed Validators response to this RSS feed.
"Congratulations!
This is a valid RSS feed.
Recommendations
This feed is valid, but interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "UTF-8", but your server is reporting "US-ASCII" [help]"
Can you help to resolve this problem, so that my RSS feed will be acceptable;e to iTunes.
Here is the feed: http://www.weare1.us/Energy_As_Medicine/Bruce_Burger/Bruce_Burger.html
Thanks, Bruce

The Server Tech Support helped to create a MIME to solve this problem but Apple is still not accepting the feed & FEED Validator feedback is:
FEED Validator
FOR ATOM AND RSS AND KML
http://www.weare1.us/Energy_As_Medicine/Bruce_Burger/Bruce_Burger.html
Congratulations!
This is a valid RSS feed.
Recommendations
This feed is valid, but interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
line 2, column 0: Use of unknown namespace: http://www.apple.com/iweb [help]
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" xmlns:iweb="h ...
line 23, column 45: Implausible date: Mon, 6 Aug 2012 15:05:12 -0700 [help]      <pubDate>Mon, 6 Aug 2012 15:05:12 -0700</pubDate>
                                             ^
line 36, column 43: Problematical RFC 822 date-time value: Sat, 1 Jan 11 14:52:58 -0800 (3 occurrences) [help]      <pubDate>Sat, 1 Jan 11 14:52:58 -0800</pubDate>
                                           ^
line 71, column 2: Missing atom:link with rel="self" [help] </channel>
^
line 71, column 2: Missing recommended iTunes channel element: itunes:category [help] </channel>
^
line 71, column 2: The recommended <itunes:email> element is missing [help] </channel>
^
Here is the feed:
http://www.weare1.us/Energy_As_Medicine/Bruce_Burger/Bruce_Burger.html
Any help would be appreciated....

ITunes could not restore iPhone (from backup) because not enough free space on *iPhone*?!

Hey everyone,
I recently upgraded to iOS 6 and before I upgraded, I made sure to make a backup because I know upgrading to the new OS can often cause people to lose their things. After upgrading to iOS 6, I found I had everything except for all my messages and some of my contacts (it appears all contacts I added within the past 6-7 months or so are gone, but the older ones are there). I need my messages and those newer contacts, so I want to restore from the backup I made before upgrading to iOS 6, but unfortunately, I get an error message saying iTunes could not restore from backup because there is not enough free space on my iPhone. Note, not my computer or my hard disk, my iPhone. First of all I don't see why I would need free space on my iPhone to restore it, and secondly, I have about 5GBs of free space on it. What can I do?

Yes. Those are the only ones saved by iTunes, as the working assumption is that all the other photos are on your computer and thus can be synced from that source, without the backup duplicating them and taking long time and lots of space. Photos on the camera roll are assumed to be not yet Transferred.
A few random-thoughts suggestions...
Not sure if you tried this multiple times, but it might worth doing. Just remember to cancell the Sync as soon after connecting so you don't overwrite the backup.
1. Check if you still have an older backup that might have the pictures. Follow the instruction by user Linda Custer in this discussion: https://discussions.apple.com/message/13011509#13011509
2. Check the links in the More Like This box on the right, or do a search for your issue on these forums or on Google.
3. Find third party utilities that treat the iPhone as an external USB disk and therefore allow for extracting photo files directly from the device, bypassing iTunes. Search here, Google or check MacUpdate: http://www.macupdate.com/
And perhaps the most obvious, that I forgot to ask about:
4. If you switched iCloud on, and selected backup to iCloud you should have a backup outside of your computer; just select the iCloud backup, instead of the local one, for Restore.
5. If you switched iCloud on and checked PhotoStream on, you should have the camera roll photos in the cloud and can retrieve them from the cloud via the Web site, your Photo app, etc.
Good luck.

ITunes will not accept payment from Banco Popular in Puerto Rico.

For some reason, iTunes will not accept payment info from Banco Popular in Puerto Rico. Is there a way around this?

Check this out:
https://discussions.apple.com/message/13243594#13243594

Itunes will not authorize apps from previous purchases onto iphone 4s ios 7

I keep getting the same warning regardless of how many times I enter/authorize the computer. I had my apps saved to an external hard-drive and copied them over to iTunes. It's not just this app, but all of them from previous purchases, free and paid. I tried to get them from my old 3g iphone, but iTunes would not reconize the apps. It shouldn't be this hard.

Have you restored as a NEW device (not from a backup) to test?

Viewing App page in itunes does not work anymore from web broswer link

When ever I find an app that I would like to view in itunes from a web browser, itunes will not open up that app. It will ask for my password and then take me to the main itunes page. It use to go straight to the "want to view" app.

If you are taking about on your computer, you have an iTunes or browser problem, not an iPod problem. Migh have better luck in the iTunes forum.
Do you by chance have scripting turned off for the browser?

Itunes will not pull up!!!! Help me!!

Itunes have been working for me when nothing else would, now it will not pull up error message: "itunes has stopped working" I use windows vista and I have at &t sercu. system. I have uninstall reinstalled, downloaded the latest version, shut down restart, and check task manager in the process tab and it still will not pull up. Quick time comes up. I have a big graduation party coming up and I really need to get this back up ASAP. Please help

If Your Quicktime works normally, then you should work though this article on trouble shooting iTunes launch failure:
http://support.apple.com/kb/TS1717?viewlocale=en_US

Purchase Order price not pulled through from Purchase Requisition.

Hi:
The Valuation Price on my Purchase Requisition does not pull through to the Purchase Order.
All the settings on "OMET" and my user profile seems to be set but still I get an error - No conditions determined (no authorization for input)
when I enter a tax code on the PO.
All my other authorizations are also okay.
What can the problem be.
Thanks.
W.

Maybe you should explain all steps YOU have done, instead of saying "yes I have done that", As this function works for many many companies without any problem, it is either an issue with your enties, or it is a bug in the programs.
For a bug, you should search OSS notes and open a message to SAP if you cant find one that solves your issue.
the authorization part of this message relates to the functional authorization, and cannot be seen in SU53.
The error is issued in these 4 cases:
   IF t160d-erfin EQ space AND ekpo-repos NE space.
      MESSAGE e235.
IF t160d-eprsz EQ space AND ekpo-repos NE space.
      MESSAGE e235.
IF ekpo-netpr EQ 0 AND ekpo-repos NE space.
and
    IF t160d-erfin EQ space.
      MESSAGE e235.
   IF ekpo-netpr EQ 0 AND ekpo-repos NE space.
and
    IF t160d-eprsz EQ space.
      MESSAGE e235.
so you only need to provide the values of following fields:
T160d-ERFIN
T160D-EPRSZ
EKPO-REPOS
EKPO-NETPR
Edited by: Jürgen L. on Jan 24, 2012 1:11 PM

SQL for pulling description from product identification section off of summ

I tried using the DB schema tool to generate sql for pullling the Description field off of the Product Indentification section on the summary tab and it came up with zero records even though i know we have a few 1,000 specs that use that field.
Can you send me the sql that i should be using or the table to look in to find that text??
thanks,
David

This should get you started,
select
ss.SpecNumber as "Spec Number"
, ssn.name as "Spec Name"
, sdftp.Description as "Description"
from SpecDescriptionFreeTextProp sdftp
inner join gsmProductIdentification gpi on sdftp.fkSpecID = gpi.pkid
inner join SpecSummary ss on gpi.fkSpecID = ss.SpecID
inner join SpecSummaryName ssn on ssn.fkSpecsummary = ss.PKID
where
ssn.langid = 0

Form is not Pulling records from database table.

Hi all,
it seems very simple question for you, but i got stuck here.
I have created one table and insert some records in it from SQL.
then i create one form and create a data block and pull all the fields form the table, now when i run this form it will not show the records... why ?
is anything wrong am i doing ?
Thanks for any help.
Abid

Yes when i press Execute Query it shows the records.
can i add this on form level, i mean when form will load i can execute this query.
how will this work.
on_form_load
execute_query;
is that right ?
Thanks for giving me clue, you soloved my problem.
Abid

Itunes did not uninstall cleanly from windows 7

I uninstalled I tunes from my PC, and the itunes suport programs did not completely uninstall. Now I cannot add Itunes back on the PC.

Seems to have stopped - not sure why but I suspect it was getting stuck trying to find a couple of album covers after I imported my library (though there was no notice of this). Anyway, I walked through the entire library and added any missing covers and it seems to have stopped the behaviour.

Itunes U not pulling description from RSS

Similar Messages

Maybe you are looking for