Itunes u refuses to list "lecture 1" after subscribing

Hello, I am experiencing this issue with itunes on my mac pro, not the actual itunes u app on my iphone. For some reason, maybe because I watched it halfway through in the past on my iphone, itunes refuses to list the first lecture of the introduction to computer science MIT class on itunes u in my library in itunes once i subscribe to it. it lists lecures 24 down to 2 in decending order. it plays just fine if you go to it in the store and just hit the play button next to it, but again, once you subscribe and go to library, it refuses to list the first lecture.
also, another funny part of this is that even though i know i have watched the first lecture halfway through already on my iphone, there is still a solid blue circle next to it as if i have not watched it yet.
can someone please help me figure out either what i am doing wrong, or what is messed up in itunes. thank you.

THIS WON"T HELP but will show you what Im talking about, the ipod is tied to your library on your PC.
http://docs.info.apple.com/article.html?artnum=93856
So your ipod got "Tied" to iTUnes 6 and its library. When you updated, iTUnes 7 and its library did not get tied to the ipod.
Also in iTUnes 7 theres a ipod diagnostic located in help>run diagnostics that will show you sometimes whats causing an issue

Similar Messages

ITunes U doesn't list the videos on Subscribe

When I view a course listing in the iTunes U section of the iTunes store I see a list with both the video lectures and the supplemental documents like homework assignments and answer keys.
When I subscribe to that course, only the documents show up in the list in my iTunes U Library. There is no listing to download and watch the actual lectures. I have used iTunes U before, so this seems to be a recent issue, and my previously subscribed courses all still show up correctly.
I have seen this behavior with these courses that I have tried:
Stanford - Introduction to Robotics
Stanford - The Fourier Transform and its Applications
Subscribing worked properly with:
MIT - Introduction to Algorithms
Stanford - iPhone and iPad Application Development
Both of the problem courses mention that they may be optimized for the new iOS iTunes U app, and the other two do not so it looks like the problem might lie with some new iTunes U format.
Brian

Same problem here.
If I subscribe from iPad the course i complete, 100% ok... but it don't sync with iTunes on Mac.
If I subscribe from Mac (example Stanford's Programming Methodology) I don't see any video.
@ithildin
have you solved?

My thorough list of problems after updating to iTunes 7

I've been reading the topics around. Some of these problems below seem to be sort of common, with slight differences in my case. Some others I couldn't figure out whether anyone else has experienced them.
First of all, unlike in a lot of the topics that I've read around, I didn't have any problems installing iTunes 7 (although the problems started right after I turned it on for the first time...). Nor did I have any problems updating the software on my iPod to version 1.2, which I have to say, unlike iTunes 7, seems to be very nice, particularly on the new detail of searching the long lists of songs/artists/albums alphabetically.
1) The least serious of the bugs on iTunes already used to happen to me with the previous version 6. Occasionaly, when I plug in my iPod to the computer, iTunes doesn't recognize it properly. Instead of the 5th generation video, it shows up on iTunes as a previous generation iPod without video. What happens then is that iTunes screws up the whole artwork settings on the iPod. It starts off by switching off the artwork visualization option on my iPod, the next time it correctly recognizes it as the 60 G video model. And when I turn the option back on, as it should always have stayed, iTunes proceeds to reorganize the whole artwork list on the iPod, by first deleting it completely and then optimizing it. When one has the iPod with more than 20 G full of albums (let alone when it's 60 G are completely full...), this is something that already takes a lot of time and becomes irritating, taking into account that it happens sort of randomly: you plug in the iPod and pray that iTunes recognizes it properly. It used to happen to me quite frequently with iTunes 6, and I thought it would be fixed with the new version 7. But it hasn't: yesterday it already happened to me again, once, after I plugged/unplugged it some 10-15 times. The frequency of the ocurrence of the problem, at least, seems to have decreased, when compared to iTunes 6.
2) As opposed to the previous problem, the most serious happend to me right after I started iTunes 7 for the very first time, with the iPod plugged in. Like it has already been reported by several particpants in this forum, it started doing the infamous gapless analysis on my BIG iPod song library and it froze after a while, finally crashing with the usual message "Do you want to send a report to Microsoft". Up to this point, this seems to be common with a lot of users of the new version 7. With me, it went farther. I was the one that froze right afterwards: when I started iTunes again, I realized that in the process of freezing/crashing/restarting iTunes had switched off my manual update option on the iPod, instantaneously erasing about 5000 songs that I had loaded in it. The problem is that I didn't have enough space on my computer hard-disk to hold those 25 G of music, so I only kept them on the iPod whereas my iTunes music library was essentially empty. And there I am now, importing every single one of my CDs back into iTunes and to the iPod, something that will take me another couple of weeks at least.
3) Taking into account the previous point, I am essentially using iTunes 7 now from the start with an empty library, importing every CD back from scratch, as if this was my first encounter with iTunes and iPod. I cannot see then what it could have done to an already existing music library on the computer (other than completely erasing the one that I had on the iPod), like some damage that also I read happened to some people. With the CDs being imported all over again with iTunes 7, it no longer does any gapless analysis of anything, because there are no songs imported with previous iTunes versions to be analyzed. The sound is also fine: I don't get any of the static or garbled noises that I read were also troubling a lot of people.
4) As for the crossfading/gapless discussion, after experimenting with those (now infamous) two options for a while, I got to the conclusion that there's really no point at all in having them, even when they work well... let alone the serious problems that their introduction on iTunes 7 has been causing. By turning the crossfading option on, I can see that iTunes merges the end of one song with the beginning of the following one, with time lengths depending on the slider position chosen by the user in the corresponding option's window. But it's something that I personally dislike a lot, to have both songs sort of being played on top of each other, during their transition. So I switched it off. On the other hand, the gapless playback seemed to be a nice welcome. It is true that, until this version 7 came up, on certain albums, like in the classical "Sgt. Pepper's Lonley Hearts Club Band" (that supposedly first started that concept) or a lot of the Pink Floyd ones, where the songs are almost continuous without any pauses between them, both iTunes and the iPod used to force an inconvenient pause between the songs. I then imagined that this gapless option would at least improve on that. But what I've figured out by now, after using iTunes 7 for three days, is that if the original albums don't have any pauses between songs, iTunes 7 now imports those albums exactly as they are, without any pauses either, even if both the crossfading and the gapless option are switched off. In other words, after importing my "Sgt. Pepper's" and "Dark Side of the Moon" CDs again with iTunes 7, I no longer get forced pauses between the songs like I used to get before, either on iTunes, or in the iPod. This, even though I make sure that those two options are switched off. The gapless playback seems then to be sort of automatic now on iTunes 7, as it should, if that's the way the original imported album is also recorded. And this troublesome gapless option seems then to be a completely useless thing, unless the idea is to fix songs imported with previous iTunes versions, or to force gapless playing on albums that originally have pauses.
5) As many people have noted already, the "Drag and drop" album artwork window only works for single songs. If one wants to cut and paste the artwork into that window for several selected songs or a whole album at once, like it could be done on iTunes 6, that's not working now. One has to select all the songs and then, with the right mouse button, choose the info window to paste the artwork into the small box there.
6) Finally, when the iPod is plugged to the computer, some viewing configurations on iTunes are not being memorized either. For example, I always turn the browser option on (Ctrl+B), so that I can see the artists and albums lists, on top of the complete song list. But everytime I plug the iPod back on, that option is switched off. For the main iTunes music library it's OK: I've only needed to do it once, and now that viweing configuration has been there forever, everytime I start iTunes. But whenever I plug the iPod and click on its music library, I then need to press Ctrl+B every time, because iTunes doesn't seem to keep that viewing option switched on from the previous time the iPod was plugged. Again, this is something that worked fine with iTunes 6.
Conclusion: there are indeed a lot of bugs to be fixed with this new version of iTunes, some of them highly damaging to the saved libraries. IF YOU STILL HAVEN'T UPDATED TO VERSION 7, DON'T DO IT YET. WAIT A FEW WEEKS UNTIL APPLE FIXES ALL THIS.
Windows XP Pro Pentium 4, 2.4 GHz, iPod Video 60 G

Upgrading to itunes 7.0 just cost me 2 days of messing around and in the end I had to revert back to v6.0 and resore my lib.
Apple CS was good but did not belly up the fact that 7.0 is defective in some cases and in the end told me I had a hardware problem!
The main issue is that I could not get itunes 7.0 to see my ipod (very infrequently after a hard boot I would see it but would not be able to upload anything). Worked(s) 100% with v 6.0.
This is very defintey 1/2 baked following in the steps of the other well known producers of sw that is not always functional/buggy the first time around.
My computer is a x40 IBM laptop with xp sp2. Will have to wait a few more weeks to see how this pans out.
IBM X40 Windows XP

HT201272 I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else.

I purchased songs from iTunes Radio on my iPhone, but now the only place they will show up is in the iTunes Store app on my phone, even after syncing to my computer a million times, the songs do not show up in my library or anywhere else. My phone is not syncing properly, I wanted to add another playlist to it that I created on my Mac. I pluged in my phone and made sure the playlist I wanted to add was checked to be on my phone when I synced.
The playlist I wanted to add was "Country." It is clearly checked. I also wanted to add the "Recently Added" playlist, which I also checked before sycing. Currently, my phone only has the "Purchased" playlist and my "All Songs" playlist on it. When I hit sync, iTunes added another playlist automatically added another playlist to the list above and checked it. It was titled "ALL SONGS 1" and had ten fewer songs in it than the playlist I had created, "ALL SONGS" had. This playlist, however does not show up on my phone after syncing, nor does "Country" or "Recently Added." (Every time I sync, another playlist is created as "ALL SONGS 2, 3, 4, etc.") One of the songs (I have not, yet checked the other songs) that I purchased from within iTunes Radio shows up in the "ALL SONGS 1" on this screen:
But does not show up anywhere else. This playlist does not show up anywhere but the two screens above. The ALL SONGS 1 or 2 playlists do not show up here:
When I search for those song in my library, it shows that I do not have them:
But if I go to the iTunes store, I get the play button and not the price of the song:
This is what things look like from my phone's side of things:
"Summertime Sadness," one of the songs I bought from iTunes Radio, does not show up in the iTunes store under purchased "All" or "Not on This iPhone"
But, it does show up under "Recent Purchases"
Also, this is what playlists are on my phone after syncing a million times:
Only what was on there before I started any of this. "Summertime Sadness" and the other songs I bought from inside iTunes Radio, do not show up in either of these playlists. Please, help me.

Hi Petrafin,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
You can download your purchases directly to your computer.
Downloading past purchases from the iTunes Store, App Store, and iBooks Store
http://support.apple.com/kb/HT2519
Cheers,
- Judy

Why does iTunes sometimes refuse to burn a 78:30 playlist?!?

Most of the time iTunes 6 will burn a 79:30 playlist to an 80-minute CD-R with no fuss. (That's a real 79:30 or 79:40 or even 79:55, not the list of times as iTunes displays them to the whole second. I monitor the time precisely using the Info/Options panel for each track.)
But once in a while, iTunes decides a playlist is too long even when it's not, like when it is really 78:30. This happens erratically. But when it does continue to give me this message, no amount of chopping time off each track seems to matter. (I use Peak to edit out "dead air" at the end. Doing this to 20 tracks can cut over a minute from the total time of a playlist.) It will only burn to one CD if I remove a whole track.
I just tested one case where it burned 75:50 but not the last track, which was another 2:43. I rebuilt the playlist one track at a time with a new name, but no cigar. I really want this particular 78:30 playlist on one CD. Can anyone help with this?

I would like at once to thank you for making this point again and also to say that it is just not relevant to the problem I'm having. However much space TAO takes up, at the end of the day it's accountable in the total time on the CD. I am not having a problem with iTunes failing to accept a playlist near the limit of time. When the playlist plus TAO space plus anything else adds up to under 80 minutes, iTunes will burn it.
My problem comes when I begin with a playlist of specific tracks that total a few seconds more than 80 minutes. Not incidentally, this is the result of iTunes adding from two to five seconds to each track as it imports the track using Apple Lossless Compression. As a result, a playlist that was actually shorter than 80 minutes becomes longer than 80 minutes.
Then, WITHOUT CHANGING THE TITLES, I remove 60 seconds from the total playlist time BY EDITING THOSE TITLES to make them shorter. For example, "Only the Lonely.mp4" is changed from 2:28.93 to 2:23.87.
I do this by using Peak to remove "dead air" from the end of the track. I then save the new file and substitute it for the old one in the iTunes library. I look before and after at the iTunes file info to confirm I have actually shortened the track by 5.06 seconds as far as iTunes is concerned. In my playlist the time now reads 2:23 instead of 2:28. I do this to other tracks, 10 or more times, to reduce the actual running time of the playlist by a full minute or more. The playlist is now UNDER 79 MINUTES.
But iTunes will not burn this exact playlist on one CD. IF, on the other hand, I simply change one track from my playlist to another track (with a new name) and a shorter playing time, iTunes will burn it just fine. What iTunes will not let me do is burn the exact playlist I started with, from which I have subtracted a full minute's time. I need a fix for this specific situation.

I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list. I have t

I am having a problem when I try to select a photo or itunes song in Imovie or other programs. I get a window with grey lettering that says: "Open Itunes to populate this list" or "Open iphoto to see photos from your iPhoto library in this list. I have tried relaunching programs and nothing appears. Seemed to start happening a while back after one of my system upgrades.

After a a lengthy conversation with Apple Tech. ($20), my problem seems to be solves. The Iphoto problem solved by trashing the plist file. The Itunes was more involved. We had to create a new Itunes folder and import the files into the new folder; and then import the playlists.

ITunes is no longer listed in Default Programs in Vista

After accepting the latest update to iTunes (7.6.029) + QuickTime this afternoon, there are several registry keys associated with iTunes and QuickTime that no longer have the appropriate permissions set which I believe is the main reason why iTunes is no longer listed in Default Programs in Vista. It also constantly alerts me that it's not the default player for audio files and if I'd like to go to Default Programs control panel to fix it. If I say yes, I get a blank screen in the details because it's trying to point to the properties of the once-listed iTunes in the Default Programs screen. I know I can disable the notification, but it's just evident of larger issues with the software.
Anyone else experience this with a fix? I've seen many, many posts when Googling this problem about the Default Programs in Vista not listing iTunes, other problems associated with registry keys for iTunes and QuickTime that aren't editable, etc.
I actually discovered this after the update when one of my sidebar gadgets would no longer launch iTunes. I performed a system restore to this morning before the update and most everything worked again. However, I had to reinstall iTunes because it warned me that it couldn't launch because some of the necessary files were missing. After reinstalling it, the sidebar tool was able to launch it again but the tool isn't listed in Default Programs now with some of the registry keys locked. I can unlock them and adjust the permissions but there are 50+ entries and their child keys that all would need to be unlocked.
It would be nice to have this problem resolved. I'm concerned about future upgrades as I've seen other users mention this problem in 7.4 and 7.1.

I have the same exact problem and same exact symptoms. I tried uninstalling and re-installing and no luck. Did you ever find a solution?

Help me!!!! my itunes library and play list are disappearance!!! Please!! 50gb of music!!

Help me!!!! my itunes library and play list are disappearance!!! Please!! 50gb of music!!

Layoff whatever drugs you are taking... they have seriously messed with your brain.
No content shows in iTunes after updating
iTunes 11.04 is most certainly compatible with iOS5 and previous versions of iTunes.

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

TS1875 when trying to turn off compatibility mode on my itunes, i dont have a compatibility tab after right clicking properties. Can any one help

When trying to turn off compatibility mode on my itunes i dont have a compatibility tab after right clicking properties. Can any one help???

Hi Roger
Thank you for your reply.
My original feed is: http://casa-egypt.com/feed/
However, because I modified the feed http://feeds.feedburner.com/imananddinasbroadcast and nothing changed, I redirected it to another feed and then I deleted this feed.
Is there any way to change the feed in itunes? The only feed I have now is http://feeds.feedburner.com/CasaEgyptStation
I tried to restore the feed http://feeds.feedburner.com/imananddinasbroadcast but feedburner refused.
I know that I missed things up but I still have hope in working things out.
Thanks is advance.
Dina
Message was edited by: dinadik

TS4223 In the iCloud column of my iTunes television section, it lists my shows as "ineligible" and doesn't show them at all on my iPod classic. Please help!

In the iCloud column of my iTunes television section, it lists my shows as "ineligible," and on my iPod Classic, won't show that I have any television shows. Can someone help, please?

kinmdchaney,
The solution to this thread should also fix your situation.
Here they are layed out for you. Try these in order until your issue is resolved:
1. Reset the Device:
Hold the power button and the home button down until the device shuts off, then power it back on and see if the problem is resolved.
2. Put the device in DFU mode:
Connect the device to iTunes
Hold both the power button and the home button down simultaneously
After 10 seconds, release the power button but leave the home button pressed
iTunes should then recognize that the device has entered DFU mode and ask to restore.
3. Put the device into recovery mode:
http://support.apple.com/kb/HT1808
Have you already tried these recommendations but to no avail?
4. Try draining your device and charge it back up for about 10 minutes or more, then try step 2 or 3 again.
I hope this helps you out.
Sincerely,
~Lt. Leviathan

ITunes suddenly refusing connection to Apple TV

Hi,
Problem: iTunes suddenly refusing connection to Apple TV!
I noticed that the above was occuring and checked out iTunes to be dismayed not to see my normal Apple TV in the iTunes devices list.
My problem is similar to ihttp://discussions.apple.com/thread.jspa?threadID=1631334&tstart=0
Which appear not to have been answered - yet has "Helpful" answers available: 2 . "Solved" answers available: 1 . (whatever that means??)
The only change I've made recently is not renewing mobileme services. My mobileme user id was also my Apple ID (which should not have expired with the mobileme account). To protect the Apple ID I changed the associated email address to an non mobileme one. As an extra precaution updated my iTunes to the new account email address and verified itunes computer authorisation as well.
At the same time thinking that the Apple TV might need to have its iTunes connection refreshed I removed (as it was not working anymore anyone) the original iTunes setting and set to reconnecting using: settings>Computers>Connect to iTunes
On the Apple TV the usual dialogue appears with the expected 5 digit passcode. I then expected iTunes to pick this up which did not occur in a normal fashion. What did come up was an inane dialogue box with the following comments (the same as I had been getting before all this nonsense started):
'Authentication required
To access this site, you need to log in to area "daap" on 0.0.0.0
Your login information will be sent securely
Name:
Password:'
etc
Obviously I've tried my updated Apple ID / registered email - but they don't work for the login and there appears to be no other explanation for this (obviously I've noted Apple's implementation of DAAP, however I still can't find a solution - hence this post)
I would really appreciate a solution to this as I am now unable to use my Apple TV whatsoever
Stephen
Macbook with OS X 10.5.6 | iTunes 8.0.2 (20) | Apple TV 2.3
Message was edited by: stevieci

Hi,
I am having the same problem, getting the following message when launching iTunes "To access this site, you need to log in to area "daap" on 0.0.0.0." I just recently update my OS to 10.5.6, but when I launch iTunes (8.02) and try to synch either my iPhone 3g, Apple TV or the wife's Ipod touch, none of which appear.
Is this a know problem?
Cheers
A

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013
Newform.aspx of list:-
Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

Hello dcakumar,
Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
- Dennis | Netherlands | Blog |
Twitter

SharePoint Online 2013 Workflows for one List stopped working after 07/08/2014

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

Our client host application in Office 365 SharePoint Online 2013, and we just found that all workflows for one list stopped working after 7, Aug 2014. It kept displaying pop-up message "Something went wrong. To try again, reload the page and then start
the workflow." when manually start a workflow for this List.
Tested workflow for other list, there's no problem.
Could anyone can help on this issue?

I want to put all my music onto an external hard drive. But I can't get it to put music on my itunes. The music list is completely empty and so is my IPOD.

I want to put all my music onto an external hard drive. But I can't get it to put music on my itunes. The music list is completely empty and so is my IPOD. How do I do this? I have a PC with Windows.

You say the music is not on the external HD, the music list (iTunes?) is empty, and it is not on the iPOd. Then where is the music you want to move to the external HD?
You can redownlaod iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Itunes u refuses to list "lecture 1" after subscribing

Similar Messages

Maybe you are looking for