Itunes update 11.0.2.26 running slow

I updated to 11.0.2.26 and now itunes is running very very slow.  I went to apps to updates apps and its sits there for what seems to be an hour trying to access iTunes Store with no luck.  When I hook my iPhone 5 up my computer recognizes the phone right away but itunes never seems too. Yes my computer and internet are working fine already checked all that.

Try just downloading and installing from the Support site - http://support.apple.com/kb/DL1614 - instead of the Mac App Store.
Clinton

Similar Messages

  • I downloaded the soft wear update now my iPhone is running slow I'm haveing trouble connecting Wifi what can I do?

    I Downloaded the new softwear update now my iPhone is running slow I'm haveing trouble connecting wifi what can I do!

    "Not only did it download a new version of itunes, but it also downloaded MS Word updates, and other software that required updating."
    MS Word is not an Apple product so it could not've downloaded with all the Apple software updates.
    "I clicked File > Check for Updates"
    What program were you running to do that?
    In any case boot from your OS installer disk and run Repair Disk from Disk Uility.

  • Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    Wifi keeps scanning and dropping even after connected to home network.  Never had this issue until the update, and now my phone runs slow and terrible.  Horrible update!!  Any ideas on a fix?

    It's important that you have a steady WiFi connection, ZealousEdge. What phone do you have? Is your phone unable to connect to any WiFi network? If you can, please try deleting the saved WiFi network and re-adding it.
    AndreaS_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • HT201210 I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do?

    I disconnected my iPhone in the middle of an iTunes update. Now it wont run properly what do I do?  I was working online and I recieved a pop up from iTunes stating that there was an harwared update for my iPhone. I had it plugged up for a while , long enoung for me to watch a tv show have dinner and come back.  I thought the update was complete and came back to the computer and unplugged it. The next morning I saw a picture of aUSB cord  and the iTunes icon. I have no use of my phone and cannot get access to emails, internet contacts..nothing . Help !

    Well it should NEVER be unplugged when doing something.
    It actually had not installed the software at that stage, it had been copied over to the iPhone, it was being checked and then it would be installed.
    You need to connect your iPhone to the computer at home and hope that you can install the software again and then restore your backup.
    If you install iTunes at work you may be able to Restore the software but you will most likely lose the content on your iPhone as you do not have a backup to restore on that computer, or all your media / apps.

  • Can my itunes cause my macbook pro to run slow

    MacBook Pro 17 inch mid 2010, OSX 10.9.4, 2.53GHz Intel Core1.5, 4 GB
    Can my Itunes library (it's large) cause my MacBook to run slow?  Constantly getting the beachball.  Have taken it to the Apple store and have dumped the system totally off the computer and reinstalled only the OS and Itunes again.  Beyond slow.  Takes at least 10 minutes to boot up if I turn it off.

    If this started happening without your having made any changes and without a warning of low disk space, then it's likely that the startup drive, or some other hardware component, is failing. Back up all data immediately, then run Apple Diagnostics or the Apple Hardware Test.
    Even if the test is negative, you should make a "Genius" appointment at an Apple Store to have the machine tested more thoroughly.

  • Updated to mavericks now mac running slow.  magicperfs says that I don't have access every time we login?

    cant find how to fix this

    magicperfs - un-install using the developer’s instructions to make sure you remove all parts of the application. Some people recommend not installing an application unless you know how to remove it. Then try re-installing it.
    Activity Monitor - Mavericks
    Activity Monitor in Mavericks has significant changes
    Performance Guide
    Why is my computer slow
    Why your Mac runs slower than it should
    Slow Mac After Mavericks

  • Itunes update wont install --error is "run prescript for apple mobile device support"

    I am running 10.5.8 and trying to update Itunes to 10.6.  It hangs on the install and says "run prescript for apple mobile device support"....I've tried numerous times and it always reverts to this message.  Ideas?

    Sidenote--Itunes compatibility is my curent version of OS.  I have an IPAD 3 that wont sync because of old verison of itunes

  • After downloading the latest update, my Mac Book Pro runs slow must make firefox force quit what is going on

    I did not have any problems until down loading the latest FF update, after loading and installing my Mac Book Pro is running extremely slow, I must force quit FF, my email takes for ever to load the little ball rolls forever trying to wait for things to open, I am pulling my hair out I need help Please

    OS X Mavericks / OS X Mountain Lion  If your Mac runs slowly?
    http://support.apple.com/kb/PH13895
    Startup in Safe Mode
    http://support.apple.com/kb/PH14204
    Repair Disk
    Steps 1 through 7
    http://support.apple.com/kb/PH5836
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • I cant install itunes updates, and now it wont run, cant install or uninstall software error 2324

    I can not install or updates itunes sofeware, have had it loaded for years now I get error 2324, i cant install or uninstall the softward

    Hey joegallow17,
    Thanks for using Apple Support Communities.
    Looks like you are having trouble installing iTunes. If you're having issues installing iTunes, try this article.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/ht1926
    Have a nice day,
    Mario

  • Why does my ipad run slow since update

    Since updating the software, my ipad runs slow, particularly games and web

    Try a Restart. 
    Press and hold the Sleep/Wake button for a few seconds until the red "slide to power off" slider appears, and then slide the slider. Press and hold the Sleep/Wake button until the Apple logo appears.
     Resetting your settings
    You can also try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. You won't lose any data, but it takes time to enter all of the settings again.
    Resetting your device
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears. Apple recommends this only if you are unable to restart it.
    Or if this doesn't work and nobody else on the blog doesn't have a better idea you can contact Apple. 
    Here is a link to their contacts with most of the information below. 
    http://www.apple.com/contact/

  • ITunes Updates Keeps Modifying the Library

    The last two iTunes updates I have allowed to run (9.1x and today, version 10) have mangled my library. The 9.1x download wiped about 2 hours of user-input cover art. The Apple cover art function is awful, to be kind. When I spend hours updating the holes and mistakes it leaves behind, I don't appreciate the next version wiping it out during the update.
    I reluctant;y put in Version 10 today. Immediately afterward, I opened my library to find that not only did this version randomly delete my cover art AGAIN, it also randomly separated my albums into multiple entries. Now I get to spend 2 to 3 hours scouring my library for the missing and wrongly assigned cover art, I also have to knit entries back into single albums.
    Who does your software QA? If I put the cover art in manually, LEAVE IT. Don't rearrange my library entries. Don't break up albums into multiple new albums. Next time you feel the need to make an iTunes upgrade, think Hippocratic, and first do no harm. AND GIVE ME A BLOCK ALL UPGRADES OPTION. I really don't need your help any more.

    SAme problem here. Did you ge tany fixes, other than manual?

  • Is Mavericks making your machine run slow?

    I downloaded Mavericks this afternoon and installed it on my iMac i7 24GB RAM Everything seems to be slow in transitions from one app to another and many apps stall for severeal minutes as if the processor is playing catch-up. Thoughts? Should I just reinstall the update?

    My iMac started running slower than normal with the 10.8.5 update.  Installed Mavericks today and it seems slower, to me as well.  I'm running a mid-2007 Intel iMac 2.4Ghz Intel Core 2 Duo with 4GB RAM, 320 GB HD.
    I know one day I will upgrade the hardware, in the meantime I shouldn't experience this kind of slowness.
    It also periodically stops recognizing my Harman Kardon USB speaker system, even though I set it in the Preferences.  I have to unplug the USB and then re-insert the cable.  My Cubase 7 doesn't recognize the speakers under Mavericks.  Everything was working fine under Mountain Lion, except the slowness at times starting up apps.  
    I think Mavericks killed my computer.  :-)

  • I installed the latest update of iTunes and now my computer is extremely slow and it freezes, What should I do to make it run  as usual?

    I installed the latest update of iTunes and now my computer is extremely slow and it freezes. When I click on the itunes icon, nothing happens, if it opens is a long time afterwards. Most of the time it does not even open, but the computer is very slow. It is a PC desktop running windos xp.

    Hey ArgentoSB!
    I have an article for you that can help you troubleshoot these issues:
    iTunes for Windows XP: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/ts1421
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • OS X 10.5.8 Running VERY slow since installing Safari and itunes updates.

    Installed latest Safari and itunes updates today. When my OS restarted the install took a really long time and since then the computer is so slow its un-usable. Its a Macbook Pro, 2.6 intel dual thingy (the model just before the uni-bodies came out).
    I have down the PRAM reset and tried launching in safe mode. Neither or these made any difference.
    I then started with an install disk installed and while holding down C. Again, it took a long time to boot, but once in that mode I launch the various utilities etc. So I opened disk utility and verify and repair disk...but it found no problems.
    Perhaps I should have repaired disk permissions?
    Also I thought this might be a lose ram issue or something. I don't have a screw driver to open up RAM slot and re-seat it, but also in 'about this mac' it can see the ram...?
    I am very frustrated right now! What have i done to my computer?!
    It was running 100% fine until I did this software update.
    ...and when I say it is running slow, to give an example clicking Apple/N in finder takes maybe 5 for that window to appear followed by another few minutes of the whirling wheel of death. Then I can click on the next item (apps for instance) and go through a similar wait.
    argh!

    No very clear idea of why it is behaving like that Samuel, but in 95% of cases it is some third party add-on, not yet updated for Safari 5, that is the cause.
    Please peruse the following, particularly with respect to Open DNS settings:
    Some general advice on updating:
    It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.5.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications and turn off energy saving and screensaver.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 4.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Macbook pro 13" running slow after update

    After the iTunes update(version 10.7) and OS X Lion update that was rolled out a few weeks ago, my macbook pro 13" has been runnning slow at times. These are mainly those times when I am listening to music on itunes and browsing on safari (and no other activity). In case I am using more than these two applications, it almost certainly runs VERY slow and I am forced to restart. Without itunes, it runs fine though.
    Any help anyone?

    The next time you have the problem, note the exact times when it starts and ends: hour, minute, second.
    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Scroll back in the log to the time you noted above. Post any messages timestamped during that interval – the text, please, not a screenshot.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Maybe you are looking for

  • TS1368 Why can't I log into the iTunes store

    When I try to update my apps, i get a comment saying...can't log into iTunes store.  It's odd because I can download new apps. My password works.  I just can't see my purchased items and can't update my apps.  Im also shown as logged in at the bottom

  • Can't install sound blaster wow headset driver for tap chat use

    ?I get an error I-00 when installing. I google it, this is the install.log file:? <div class="message-format"><div class="rplol">Sound Blaster World of Warcraft Headset] GUID={0429B343-D023-4524-89BC-0478E0D9E3C3}? Error=I-00 Bitmaps not found. So wt

  • Use of @Transactional in Hibernate Data Access Object

    Hello I have just started using Hibernate 3 along with Spring framework using MyEclipse and Oracle 10g. I have started with a basic application having a single database table Customer which is represented by an annotation based POJO. Then created a s

  • Workspace App

    Is there a workspace mobile app for android/iphone in the works?

  • ABAP Web Dynpro Guided Procedures integration

    Hello,   does anyone know if there is a way for an ABAP Web Dynpro to expose input and output parameters for use in Guided Procedures?   Thanks in advance     Gabor