ITunes update causing error messages

Hi all.
This is my first time posting, please forgive any faux pas.
I installed the new update from itunes.
It would not install and told me there was a problem, but i did not write down the problem. I restarted the computer in the hope i could fix it with a tweak.
However i then received the APSDaemon.exe System error. The programme can't start because MSVCR80.dll is missing from the computer. Try reinstalling the programme to fix this problem.
I uninstalled iTunes, tried reinstalling but keep getting a message to check my privileges.
I have done a sfc/scannow, in command prompt in safe mode and normal mode, which is not showing any problems.
Used the MS fixit tool to completely uninstall iTunes, tried reinstalling, still the same message.
i seem to have followed all the advice advertised under the APSDaemon.exe. error messages.
Restarted, 4 more attempts and installing with the admin message. I am using the admin account to do all of this in.
It has now been 3 days since it happened and i still cannot find a cure.
I have had suggestions to plug my phone into the pc in the hope it may resolve the issue, but i am worried in case it mucks up the phone as well.
There seem to be a lot of people who have suffered the problem but most of the recommended actions have not helped resolve my issue.
( it could be me i guess).
Thanks for any help offered.

Me again.
I have spent all day working on this problem.
I have finally fixed it by myself!!
As no one responded to my plight, and in case anyone else has the same problem, here is how (i think) i sorted it.
The only way that i could reinstall iTunes successfully was to go into the control panel and under publisher uninstall each and every item that had an Apple inc. name by it.
After reinstalling it, i had to then download quicktime etc and reinstall that too.
Hopefully when i restart the computer all will be ok.
If not i will be back.
Thanks anyway

Similar Messages

TS3694 New itunes updates installation error message 0x800736FD. Has anyone encounter such problem before? appreciate your advice

Hi guys
I have this error message when installing new Itunes updates:
HResult: 0x800736FD.
Can anyone help me? thanks

I did some googling and found alot of topics from you on this issue, to me it simply seems like on of the connectors is broken or loose.

Apple TV update causing error message.

I recently did an update on my Apple TV and after performing it I'm now getting an error message that my HDMI cable needs to be connected to a HDCP port (which I presume my TV doesn't have). I can no longer watch anything on iTunes or netflix. How do I fix this?

Welcome to the Apple Community.
Check that the HDMI cable is correctly seated at both ends.
Try disconnecting the cable and connecting it again.
Try another cable.
Try restarting the Apple TV
Try the Apple TV with another TV

During the installation of iTune update received error message C runtime Library error 7 1114, R6034. Unable to now open my itunes. How do I fix this?

During the update of iTunes to my desktop, I received the error message: C:runtime error. R6034 Error 7 1114. What does this mean and how do I fix it?
Not that computer savvy so please walk me through the fix in simple terms. Thanks

Hey lucky scruffy,
Thanks for the question. I understand that you are experiencing issues with iTunes for Windows. The following article outlines the error message you are receiving and a potential resolution:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Some Windows customers may experience installation issues while trying to install or open iTunes 11.1.4.
Symptoms may include:
"The program can't start because MSVCR80.dll is missing from your computer"
"iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows Error 126)”
"Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly"
"Entry point not found: videoTracks@QTMovie@@QBE?AV?$Vector@V?$RefPtr@VQTTrack@@@***@@$0A@VCrashOnOverf low@@***@@XZ could not be located in the dynamic link library C:\Program Files(x86)\Common Files\Apple\Apple Application Support\WebKit.dll”
Resolution
Follow these steps to resolve the issue:
Check for .dll files
1. Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
2. If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
3. Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
1. Uninstall iTunes and all of its related components.
2. Reboot your computer. If you can't uninstall a piece of Apple software, try using theMicrosoft Program Install and Uninstall Utility.
3. Re-download and reinstall iTunes 11.1.4.
Thanks,
Matt M.

MDO Update causes error message

Hello,
I am currently trying to update to an MDO that first gets data inserted to and then gets data updated.
The insert works fine, but for the update I get the following:
com.sap.xmii.Illuminator.logging.LHException: java.lang.NullPointerException: while trying to invoke the method java.lang.String.equalsIgnoreCase(java.lang.String) of a null object loaded from local variable 'sKey'
This worked on SP03 and is now broken on SP05.
Can someone please propose a solution.
Regards
Christoph

James Bouret's problem is fixed -- or maybe not.
From my blog: +We traced the problem to "something bad" about the folder or its contents that was being reported. By opening the library and the vault with control-click Show Package Contents and navigating down, it was possible to trash the folder. Not only did the vault update complete once that was done, but it worked many, many times faster than before. The bad news is that I think this is due to a bad spot on the disk, indicating a drive that is on its way out. If you have vault problems: back up carefully and consider that you may have a bad disk.+
A bad spot on the disk may also be the reason that Johnny Cappuccino could fix his problem by modifying the image. That will have rewritten the sidecar files, a process that usually involves creating a new temporary file and then atomically deleting the old file and renaming the new one. So the new file is shiny and good and the bad spot is ready for use by another hapless program.

HT2292 gnature can't can't update new version of itunes due to error message saying invalid siupdate new version of itunes due to error messagecan't update new version of itunes due to error message saying invalid si saying invalid si

can't update new version of itunes due to error message saying invalid si

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

HT1925 Can't update iTunes because of error message "iTunes.msi is not a valid installation package for the produce iTunes". How can I fix this?

I can't update iTunes because of error message "iTunes.msi is not a valid installation package for the product iTunes". How can this be resolved. I am using a PC with Windows XP

If you can, uninstall and reinstall itunes..... Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Hope this helps.

My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. Help

My iphone 5c says connect to itunes. It won't update/restore; error message (27) comes up. I also haven't backed the phone up since last year. HELP.

Hi there owain11,
It looks like that particular error may be realted to a hardware issue. Take a look at the article below for more information.
Resolve iOS update and restore errors
Check for hardware issues
Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
These errors mean that your device or computer may have a hardware issue that's preventing the update or restore from completing.
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
-Griff W.

HT3743 How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" Kindly suggest

How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest

It sounds a lot like your phone was hacked or jailbroken to unlock it prior to your trying to update it.
If that is the case, it is nowpermanently bricked.

TS3694 How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" Kindly suggest

How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. But it got stuck and now my itunes is displaying Error message: "there is no sim card installed in the iphone you are attempting to activate" and my iphone is without service. While i am trying to activate my ihone on wifi also it doesnt saying servers are temporary unavailable try after sometime. Kindly suggest

tariqrehmani wrote:
How do i restore my iphone from "no Service". I tried to update my iphone 3G TO iOS 6.0. ...
The iPhone 3G is Not Compatible with iOS 6...
It also appears that your phone may have been Hacked and / or Jailbroken...
If this is the case... you are out of luck... Because...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
Why Jailbreak is Not Supported > http://support.apple.com/kb/HT3743

I was today invited to upgrade my iTunes when I logged on. Update failed. Every time I now try to open iTunes I get error messages. Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126"

I was today invited to upgrade my iTunes when I logged on. Update failed. Every time I now try to open iTunes I get error messages. Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.

I too had this problems (Windows 8.1). A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
Today I fixed the problem by:
Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
Uninstall ALL Apple Software using Control Panel / Programs and Features. I uninstalled:
iTunes
QuickTime
Apple Mobile Device Support
Apple Application Support
Apple Software Update
Bonjour
Delete the folders:
C:\Program Files (x86)\iTunes
C:\Program Files (x86)\Common Files\Apple
Restart the computer
Reinstall QuickTime
Reinstall iTunes
Everything works GREAT now, including the iTunes store. You will not lose your media files, I got everything back, all my settings, playlists, etc.

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

I am having a lot of trouble downloading itunes.My latest error message is that MediaToolbox.dll is missing. I have been trying to fix this for three days now .And it all started with the last update .Can anyone help?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error

updated iTunes to 12.0.1 on XP after updated recieved error message "The procedure entry point ADAdPolicyEngine_DidEnterStation could not be located in the dynamic link dll" "itune not installed correctly error 7 (windows 127). reinstalled same error. Tried suggested steps
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall press on)
Bonjour
Apple Application Support
Still getting same error message. Can anyone help me

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

I updated my itunes but this error message keeps popping up, what should i do?

i updated my itunes but this error message keeps popping up, what should i do?

SUPERNOVA_rico wrote:
i updated my itunes but this error message keeps popping up, what should i do?
What is the Error Message...?

I tried to update the last itunes, but the error message says there is a missing program to finish the update. But it doesn't tell what program.

I tried to update the last itunes, but the error message says there is a missing program to finish the update, but it doesn't list what program is missing. I have never had issues in the past updating a new iTunes.

"There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support perssonel or package vendor."
That's perfect, thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

ITunes update causing error messages

Similar Messages

Maybe you are looking for