ITunes update did not install correctly?
I started my iTunes update and half way through I lost my internet connection. I now get a message (update installed incorrectly, reinstall iTunes) How do I fix this? I can't find the latest update anywhere.
Hello rothespl,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
After verifying that iTunes is completely uninstalled, restart your computer and download and install the latest version of iTunes.
Best of luck,
Mario
Similar Messages
-
Apparently a recent update did not install correctly and we get a message: Service (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start systen services, How do we fix this?
Solving the iTunes Installation Problems in Windows
1. Apple has posted their solution here: iTunes 11.1.4 for Windows- Unable to install or open - MSVCR80 issue.
2. If the Apple article does not fully resolve the problem for you, then try Troubleshooting issues with iTunes for Windows updates - MSVCR80. -
A few weeks ago an itunes upgrade did not install properly on my PC so I had to uninstall itunes and everything associated with it. I was able to reinstall itunes and it works fine including syncing with my ipod. However, now whenever I open my email (outlook) a box pops up stating MobileMe Services has stooped working. This happens a couple of times after I click to close the program. This a nusance and really slows down getting to my email. From what I've found MobileMe was something that used to be used by itunes to sync mobile devices but is no longer used by itunes. I can't find a way to remove this MobileMe from my PC. I've tried going into Contol Panel then Programs and Features to uninstall it but there is no button there to uninstall it. Any suggestions on how this can be removed?
Do you have a backup that you can restore from? Your old hard drive seems to be the problem.
-
I downloaded a new version of I tunes yesterday and it did not install correctly- I cannot open I tunes, I have tried to download again, install again, repair and nothing... should I uninstall ITunes completely and reinstall fresh? what happens to my music collection, images, etc?
Hi bezoya,
Thanks for using Apple Support Communities. If iTunes is not launching after an update, I would recommend trying a thorough reinstall as described here:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Cheers,
- Ari -
I have a error message that says the iTunes update did not download properly and I can no longer open my iTunes icon on my desktop. Any suggestions?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Today, 01/23/2014, I tried updating iTunes, as I got a messsage that update was available. The update did not download correctly I got the message to uninstall iTunes and reinstall it. After the uninstall and reinstall I got an error message, that stated: The program can't start because MSVCR80.dll is missing from your computer. Try reinstalling the program fo fix. then I got the message, iTunes was not installed correctly. Please reinstall iTunes. Error 7 (windows error 126) I have had iTunes since I purchased the iphone in 2012. I have only updated the product since then until today when I did the uninstall ans reinstall as stated in above directions. I am not sure what is different now. please help
I had this problem as well but found the soultion on another post from turingtest2 - it worked for me:
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or by right-clicking the downloaded installer and selectingRun as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
How can I download itunes when I get the following errors ..ituneshelper did not install correctly error 7..I .have installed and uninstalled a dozen times with various fixes...b noir for example and used Revo to clean up.
This has been a problem for 6 weeks now, I retry when I have time and patience and use my other laptop which is also Windows 7 and runs with no problem.
Every attempt fails when all seems fine on the desktop and I try to log on to Itunes I get the errors.
Any help greatly appreciated.
billymacGo to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (If this won't uninstall press on)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
Itunes did not install correctly. windows error 126
After being prompted to update to the latest version of iTunes, I did so. After the download I was given the following message: itunes did not install correctly error 7 windows error 126 - please attempt to re-install. I have attempted uninstall and deleting the software followed by new download and re-install. Same results each time. Please suggest a fix for this issue. Thank you.
Hi dchamp,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
Media Encoder update 4.1 did not install correctly?
I updated Production Premium package to 4.1 when it became available, 31. May.
Now when I check updates, Adobe Media Encoder 4.1 update is still on a list. Somehow it did not install correctly.
It is working OK and version shows 4.1.0.107.
The only problem so far I've noticed is not connected to AME but Premiere: it do not accept .VOB files.
Similar hardware (PC) / software combinations are working OK with other collagues here in our studio.
If I install the AME update again, after downloading and installation "The updating process is finished"
prompt pops up, but the update installation is not complete.
What is preventing AME to install correctly?
Just now I can not uninstall the complete package.First thank you Harm for trying to help.
I'm just learning to use this forum. Your most useful hint was on another thread, and
I could not give you points there. I've also found many of your other posts useful in these forums.
Thanks for those as well.
And because this is Premiere forum I prefer not to hassle with my After Effects problems here.
But no, I don't get full interface at all, just usual MS error message: "Color Finesse has encountered a problem and needs to close..."
I think the most apparent reason is my heavy project, vast amount of material, lots of HD compositions and only 32 bit XP with 4 Gigs of RAM.
When I tried to make a new HD project with less material, Color Finesse's full interface opened just fine.
And because my project's color correction needs were simple foreground to background balancing for bluescreen shots, I managed to do it with Levels. -
Connected ipad to win7 computer to upgrade os as I needed to download an app. Says it has latest version but it did not install correctly. Ipad says hello,asks for language and location,wi-fi then options are set up as new ipad,restore from icloud or itunes backup. I think I have managed to backup over my good backup and lost everything. Ipad will not boot HELP
Hello RodneySmart,
Thanks for using Apple Support Communities.
From what I understand about your issues is that your iPad will currently not turn on. In attempt to resolve this issue please follow the steps in order below:
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Take care,
Alex H. -
I have tried to download ITunes 11on Windows 7 but I keep getting error message 5 telling me it did not install correctly and to install again. Can anyone help?
HI there,
I would recommend taking a look at the troubleshooting steps found in the artilce below.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
-Griff W -
When I want to syncronize my photo's from my computer to my Ipad, I get the message "itunes photoprocessor was not installed correctly, please reinstall itunes, error 7"
When I did so, the same message appears again and again.
Anyone knows the solution?
Thanks on forhand.Repair Apple Application Support.
START/CONTROL PANEL/PROGRAMS N FEATURES/highlight APPLE APPLICATION SUPPORT, then click the REPAIR button -
When starting Window XP on my laptop (which was connected, in the past, in a wi-fi network now no more available) appears immediatly this allert: "iTunes Helper was not installed correctly. Please reinstall iTunes. ERROR 7."
Reistallation of older or up to date iTunes versions is impossible because: "Installation package iTunes.msi is located on a network resource not available" and because "It is impossible to remuove thew previous verson of iTunes. Impossible fto find the path."
Someone can help me ???
Thank,
GeraldTake a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
My 10.8.3 update did not install properly citing an 'Unknown Error'. Now, my Mail and Mac App Store aren't working. What went wrong and how do i fix it ?
I tried this and still have the same problems. If I open Address book or the Mac App Store I get the library rebuild popup and a hang. I created a fresh user and then things are better apart from the printing issue. Its clearly some 3rd party software issue but the crash logs are meningless to me. I used the excellent Etre check app from http://www.etresoft.com/etrecheck so I have a list of what is being loaded and can compare clean and crashed user info but as I cant work out which of the startup items, launch agents, launch daemons etc that are causing the problem.
I have eliminated Dropbox, Mac Keeper and Witness, and it isnt related to my exterrnal LED cinema dispay or my external thunderbolt drives, or any USB devices if thats any help to anyone else. Info from Etrecheck follows -
Kernel Extensions:
com.oxsemi.driver.OxsemiDeviceType00 Version: 1.28.7
com.rogueamoeba.InstantOn Version: 6.0.2
com.rogueamoeba.InstantOnCore Version: 6.0.2
com.Cycling74.driver.Soundflower Version: 1.5.3
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
[not loaded] com.adobe.fpsaud.plist
[not loaded] com.adobe.SwitchBoard.plist
[not loaded] com.bombich.ccc.plist
[not loaded] com.dymo.pnpd.plist
[not loaded] com.intego.BackupManagerPro.daemon.plist
[not loaded] com.micromat.TechToolProDaemon.plist
[not loaded] com.microsoft.office.licensing.helper.plist
[not loaded] com.orbicule.witnessd.plist
[not loaded] com.sierrawireless.SwitchTool.plist
[not loaded] com.stclairsoft.AppTamerAgent.plist
[not loaded] org.macosforge.xquartz.privileged_startx.plist
[not loaded] pcloudd.plist
Launch Agents:
[loaded] com.divx.dms.agent.plist
[loaded] com.divx.update.agent.plist
[loaded] com.epson.epw.agent.plist
[loaded] com.lacie.raidmonitor.daemon.plist
[loaded] com.lacie.safemanager.daemon.plist
[loaded] com.micromat.TechToolProAgent.plist
[loaded] com.orbicule.WitnessUserAgent.plist
[loaded] org.macosforge.xquartz.startx.plist
User Launch Agents:
[not loaded] .DS_Store
[loaded] com.adobe.AAM.Updater-1.0.plist
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.digitalrebellion.SoftwareUpdateAutoCheck.plist
[loaded] com.divx.agent.postinstall.plist
[loaded] com.google.keystone.agent.plist
[loaded] com.propaganda.dejavu.dvmonitor.plist
[loaded] com.valvesoftware.steamclean.plist
[loaded] com.zeobit.MacKeeper.Helper.plist
User Login Items:
iTunesHelper
Synergy
TomTomHOMERunner
Dropbox
3rd Party Preference Panes:
Déjà Vu
Flash Player
Flip4Mac WMV
GR-55
Paragon NTFS for Mac ® OS X
Perian
Printopia
TechTool Protection
Witness -
itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.
Maybe you are looking for
-
SAP R/3 application component issue
Hi all, My issue: SAP R/3 application component hierarchy node in RSA6 got saved in $TMP package as local object. When iam transporting the request from Dev to QA this hierarchy is not getting transported and all the application components in ECC QA
-
I bought a real estate app on my iphone. I want to use it on my MacBook Air because of the larger screen. I see the icon in my Itunes account, and when I click it to open it, it won't do anything. Do I have to purchase the app again to use on my M
-
Automatic creation of Cost Object owner in work flow
Hello Experts, Business requirement background is SREQ Contact person just enter cost object and submit for approval.In all cost object cases he can save the service order and submit. After SREQ FRA reviewer approval, before workflow notification mai
-
Had to replace my hard drive how do i get my music back from itunes
i had to replace my hard drive how do i get my music back from itunes
-
Need some clarifications on Quality-of-services
Hi Everybody. I need some clarification on Quality-of-services.the question is which one is better in Quality-of-services (Exactly-Once or Exactly-Once-In-order)?why?wht is the differenc between them?