Itunes update issue restarted computer now cannot start itunes

Prompted to download latest itunes version, I did this and restarted computer and now cannot restart itunes message "itunes cannot run because some of its required files are missing. Please reinstall." Do I have any options except reinstall will I lose all my playlists? Any assistance much appreciated.

THANKYOU SO MUCH.
I update this morning at work, on VISTA with iphone 4. Same thing, i restart, it tells me Itunes cannot start as files are missing.
I seached EVERYWHERE, with lots of stupid long winded possible solutions.
THIS WORKS, and its ONE SIMPLE CLICK... WHY DO APPLE NOT HAVE THIS LISTED ON THE FRONT OF SOLUTIONS
THanks to those who actually know what to do above.

Similar Messages

  • IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  Please help

    IPad 4 switches off when i am using it, even when battery is fully charged.  Restore function (holding down both buttons) often does not work.  Cannot power up iPad.  I have updated software, restarted computer, but no success.  I did restore the iPad about 8 times during the past 2 weeks.  Just completed another restore.  iTunes says the the iPad has been restored and will restart automatically and appear in iTunes when it is ready.  That was 30 minutes ago.  iPad still won't start.  I am looking down the barrel of yet another fruitless restore.  What a crap product.

    Try a reset:
    Hold the Sleep and Home button down until you see the Apple logo.

  • Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    Up/Down Arrow keys do not perform their function on SOME websites or at SOME times, on other websites and at other times these keys work fine, updated firefox, restarted computer. turned off cursor key option in Advanced tab, using autoscrolling option.

    You may have switched on [http://kb.mozillazine.org/accessibility.browsewithcaret caret browsing].
    You can press press F7 (on Mac: fn + F7) to toggle caret browsing on/off.
    See http://kb.mozillazine.org/Scrolling_with_arrow_keys_no_longer_works
    * Tools > Options > Advanced : General: Accessibility: [ ] "Always use the cursor keys to navigate within pages"

  • Freezing up after latest 10.5 update when restarting computer or waking fro

    Freezing up after latest 10.5 update when restarting computer or waking from sleep. Is anyone else seeing this?

    I am having the same problem with the screen not waking up after it goes to sleep. Once I was able to recover with pressing the power button just long enough to wake it but not restart. The other two times I had to power down and restart -- I also got the jagged screen graphics once.
    I have been experiencing this since I installed the 10.5.3 update. It seems to be ok if I put the computer to sleep using 'Sleep' on the Apple menu, but if my screen saver comes on and it goes to sleep on its own, then I have problems waking it.
    Frustrating - I don't like to power down and restart my iMac if I can avoid it.

  • I have updated to iOS8. Now cannot connect to BT speaker I have been using for months. BT discovers it but will not pair. Help please

    I have updated to iOS8. Now cannot connect to BT speaker that I have been using for months. BT discovers it but will not pair. I have tried switching both off & on but nothing helps.

    I am sure the BT speaker not the problem because it works fine with iOS8 on my iPad!
    ... And no I am not trying to connect both at once.  To be sure I have switched the iPad off completely and switched the speaker off & on but still with the same failure to pair.  The iPhone sees the speaker but then gives me the pairing unsuccessful message when asked to connect.

  • I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

    I have just updated my iPad and now cannot access any apps as they just close down straight away. Any ideas why and how to solve?

    Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
    I've also seen it suggested that people try downloading a free app from the store onto the iPad (as that seems to reset something), and then re-try the apps - the free app can then be deleted.

  • Macbook pro did an update and restart and now my password won't work

    Hi there,
    My Macbook pro did an update and restart and now my password won't work. help!

    When I type in my password it looks like it is going to log in....the screen changes to blue...and then the login screen loads again.

  • Mac OS 10.10. Updated Canon drivers now - "Cannot start the MP Navigator EX"

    Mac OS 10.10 Yosemite
    Canon MG5320
    Worked fine yesterday.
    Updated software from here
    -> http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg5320#Drive...
    Now when running MP Navigator EX 5.0 Opener or MP Navigator EX 5.0, I get  "Cannot start the MP Navigator EX".
    Removed all printers software and deleted printer in System prefs.
    Reinstalled. No help...
    I can print to it from apps (both AirPrint & computer using wifi) and using USB.
    Works using Image Cature.
    Cannot run the MP Navigator EX 5.0 software.

    Mac OS 10.10 Yosemite
    Canon MG5320
    Worked fine last week.
    Updated software from here
    -> http://usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mg_series/pixma_mg5320#Drive...
    Now when attempting to run MP Navigator EX 5.0 Opener or MP Navigator EX 5.0, I get  "Cannot start the MP Navigator EX".
    Removed all printers software and deleted printer in System prefs.
    Reinstalled. No help...
    I can print to the 5320 from apps (both AirPrint & computer using wifi) and using USB.
    Works using Image Cature.
    Cannot run the MP Navigator EX 5.0 software.

  • I installed update as shown but now cannot open Itunes HELP?

    What do I have to do to get Itunes back to my computer....I clicked on the update that appeared and now the whole thing is gone and I am being told to reinstall?

    What's the precise text of the message please, bern? (There's a few different ones I can think of that you might be getting.)

  • Newly authorized computer, now cannot find any iPhoto and iTunes libraries. Ideas?

    I've authorized my new computer, but now cannot locate any iPhoto or iTunes libraries.  I have an older Apple ID and a newer, icloud.com id and neither will work. Ideas? Thanks

    How did you transfer your files from the old Mac to your new one?
    What system are you running on your new Mac and what is on the old one?

  • I tried to use Battery updater and it failed, now it starts up on my computer boot up evrytime and fails everytime, how do you turn it off or get it to work?

    I tried to use the Battery updater software on my Powerbook G4 and it didn't work, now it starts up on my computer startup everytime, how do you get it to work or turn it off?

    It's possible that your model PowerBook doesn't need the updater.
    Did Software Update offer you the Updater, or did you download it from Apple? This article"
    http://support.apple.com/kb/HT2339
    has a list of the specific Mac models requiring the update and how to tell if you have one of those models--if yours is not among them, the updater shouldn't run.

  • What happened ??? I did the "there are updates for your computer" & now...

    I have a macbook pro I bought 5 mos. ago.... yesterday when I went to shut down my computer I get a pop up thing that says there are updates for my computer and that I would need to restart it when I'm done or something like that... so I did it, and now...... my computer is slower, and everytime you got to load a new page, the address in the address bar has this blue highlight that scrolls from left to right as the page is slowly loading.... what happened?????

    I disagree with the recommendation to try Chrome.Since the last Chrome update I am experiencing the same issues you are.I have also tried Opera which is fairly fast but extremely buggy in my experience.I have used Firefox but dislike it for the same reason I disliked IE.............toolbars!And I want to see more of the page than it displays.My Dad swears by Safari but I find the interface to be less user friendly than either Chrome or Opera.I must confess that I have all 4 of these browsers on my late-2008 MBP and use each one in different situations based on my needs at the time.Try them all and decide which is right for you.The best choices are made with hands-on experience.

  • I have just updated pages app, but now cannot open the app.?

    I have just updated the pages app but now cannot open the pages app

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
     Cheers, Tom

  • HT201269 Updated to ios7 but now cannot turn my apps off to save battery. Have tri

    Updated to ios 7 but now cannot turn off apps to save battery
    It worked before , holding down app until it jiggles and delete but now just opens app

    Double tap the home button and swipe upwards on the preview of the App (not the App Icon).
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • I have just tried to upgrade to the latest version of itunes, and my ipad was connected to my computer at the time. The upgrade crashed part way through. I now cannot start itunes as it says MSVCR80.dll is missing. Anyone got any ideas?

    I was upgrading to the latest version of itunes, and my new ipad mini was connected to my computer at the same time, try to sync for the first time. The upgrade crashed part way through, and now itunes won't load and I get an error message saying MSVCR80.dll is missing. How do I do about reinstalling this file?

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99792)

Maybe you are looking for

  • F-54 Vendor down payment

    HI, I have two open items for a particular vendor (one down payment and one invoice) for the same amount. when I am trying to clear down payment against the invoice IN F-54 I am I am getting the error saying "No down payment exist". I have checked th

  • Ordinary depreciation changed in repeat run

    Hi Gurus, We posted some unplanned depreciation in march 2010. and did afab in repeat run for period 12. System posted unplanned depreciation but in some  assets  ordinary depreciation is also changed. After analysing one of the asset i come to know

  • Signed applet works on pc  but can't print on mac! security issue!

    Hello I have an applet which works beautifully on the pc under ie, firefox, chrome and safari. Essentially - it uses the batik libraries to download an svg file and then print it. Problem is that firstly - no matter which operating system or browser

  • Photosmart 6520 power cord

    I have just moved and have already matched a myriad of cables to peripherals.....however, the only power cord that is not clear is the one to my Photosmart 6520 printer. I think I was expecting a typical power cable with an inline AC adapter (like fo

  • Error ORA-06533:  executing dbms_odm.CreateStdFactmv

    Hi, I have been defined and validated a metamodel for a cube and their dimensions, using CWM2 package. I obtained the scripts for dimension materialized view with dbms_odm.CreateDimmv_gs, I run them successfully, but when I try to run dbms_odm.Create