ITunes update version 10.6.3 does not load after selecting "download"

iTunes finds update 10.6.3, I select the download and nothing happens. Have not had this problem before.

(apologies, kipwil. This is a side note for wha.)
Some interesting observations on this by markarich over here, wha:
Re: apple software update in windows help!!!!
My thoughts there:
In the normal course of events, SoftwawareUpdate.exe is not set to run as an administrator.
In the normal course of events, if SoftwareUpdate.exe is set to run as administrator, then the Apple Software Update.lnk compatibility mode tab should also be showing that ASU has been set to run as an administrator. So it's not clear why a discrepancy was being seen there.
(Granted, if we've dealing with weird permissions **** here then the symptoms ought to be a bit weird, by definition.)

Similar Messages

Site does not load after some minutes of creation or after restart the server

Hello,
I have been asked to create a test enviroment identical to the production enviroment. So, what I did was:
Backed up the production web application's content database: Prod_WSS_ContentDB
Created new test servers (domain controller, sql server and sharepoint 2013 server) in a new, completely isolated, network environment, without any connection with the production environment (specifically Azure)
Created a new web application in test environment with a new content database.
Dismounted the new content database with powershell: Dismount-spcontentdatabase Test_WSS_Content
Copy the Prod_WSS_ContentDB database to the test sql server and restored it with Management Studio.
Mount the Prod_WSS_ContentDB databe to the web application with powershell:
Mount-spcontentdatabse Prod_WSS_ContentDB -WebApplication http://testsp/
Then, when I type http://testsp in the browser it redirects me to http://testsp/SitePages/Home.aspx
and the site loads exactly as the production environment.
But, after some minutes, or if I restart the Sharepoint Server, when I navigate to
http://sitesp I am redirected to http://testsp/SitePages/Home.aspx
as expected, but the site does not load, the browser just show a complety blank page.
The Central Administration site loads normally.
Trying to fix it I found that if I dismount the content database Prod_WSS_ContentDB, then mount the test database Test_WSS_Content,
then navigate to the site, dismount Test_WSS_Content and finally mount again Prod_WSS_ContentDB, the site loads normally, no blank page, but after some minutes or if I restart the same happens again.
For the error event I receice in event viewer it seems that the problem is related to database. I have not found a solution for this error... How can I solve this?
The error is:
Log Name: Application
Source: Microsoft-SharePoint Products-SharePoint Foundation
Date: 6/27/2014 2:44:22 PM
Event ID: 5586
Task Category: Database
Level: Error
Keywords:
User: UCETEST\spaccount
Computer: TESTSP01.ucetest.edu.do
Description:
Unknown SQL Exception -2146893055 occurred. Additional error information from SQL Server is included below.
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-SharePoint Products-SharePoint Foundation" Guid="{6FB7E0CD-52E7-47DD-997A-241563931FC2}" />
<EventID>5586</EventID>
<Version>15</Version>
<Level>2</Level>
<Task>3</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2014-06-27T14:44:22.743159500Z" />
<EventRecordID>4742</EventRecordID>
<Correlation />
<Execution ProcessID="1688" ThreadID="1692" />
<Channel>Application</Channel>
<Computer>TESTSP01.ucetest.edu.do</Computer>
<Security UserID="S-1-5-21-2552298216-324766354-3392103171-1108" />
</System>
<EventData>
<Data Name="int0">-2146893055</Data>
<Data Name="string1">A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: SSL Provider, error: 0 - The handle specified is invalid)</Data>
</EventData>
</Event>
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

Hi,
According to your post, my understanding is that Site does not load after some minutes of creation or after restart the server.
Please make sure you create a test environment for existing production site correctly.
Here are some great articles for your reference:
Moving content between SharePoint environments
Copy SharePoint production data to a test environment
Build a SharePoint 2010 Test/Development Farm
Best Regards,
Linda Li
Linda Li
TechNet Community Support
Hello Linda Li,
I follwed that steps to create my test enviroment... and I have recreated it some times using that same steps, but the problem persits. After some minutes or after I restart the SharePoint server the site does not load.
Melvintt
MCTS, Windows Server 2008 R2: Network Infrastructure
MCTS, Windows Server 2008 R2: Active Directory, Configuring

The webpage does not load after pressing enter or CTRL+ENTER. My OS is Windows 7 Ultimate

I have tried installing the older version Firefox 3.6. After entering the URL on address bar it does not load after pressing enter or CTRL+ENTER

This issue can be caused by an extension (AVG Safe Search can cause this) that isn't working properly.
Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
* [[Troubleshooting extensions and themes]]
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)

10.2.8 Finder does not load after getting into OS X

I am pretty sure this happened to a lot of people, as I have read many many messages on this issue.
My computer is a Powerbook 867 with 128built in DDR and 512 added.
40Gb internal HDD and a 40GB firewire 3G ipod (the old 3G).
Here's the problem:
Last night just when I finishsed watching some divx on VLC running on 10.2.8, I quitted VLC using apple+Q, then closed the finder window i opened with apple+W. They both closed, but then the finder just did not respond (or have quitted). There isn't a little triangle below my finder icon on the dock. Everything else on the dock works perfectly fine. Desktop icons have disappeared.
Now I have restarted, nothing helps; went on apple discussion and found some "HELPFUL" solutions - deleting the finder preferences. First how was I suppose to delete it? ok... I installed a 10.2.3 on my ipod and boot it through there, also did a repair permission on my internal HDD. Finally deleted the com.apple.finder.plist.. So I booted up using my internal again. But still... finder DOES NOT LOAD after I got into my OS X.
Please if anyone can give me a solution to this problem!
P.S. the finder on my ipod is working fine. AND I do not want to reinstall OS X on my interal because I only did it last week after it went to service after a HDD fail (it has been replaced).
Powerbook 867Mhz 128+512MbDDR Mac OS X (10.2.x) 10.2.8

Check System Preferences - Accounts
Choose you account - login items: If iTunesHelper
shows up - remove it it will prevent re-installation.
It did not have iTunes in the list, just mail and iCal alarm. Deadlines and emails are vital in my home office.
Now that I think about it, adding Mail to the list was the only thing that I had changed to the computer when this happened, but I can't imagine how that would alter permission to install on the OS.
Eric
Note: I saw a G5 1.2 for $1,500 CAN. I was tempted.

Version 18.0.2 does not load Roboform 7.8.6.5 as a Toolbar. The Roboform version does not install. Please help.

The Roboform Toolbar does not appear.

The RoboForm for Firefox page, http://www.roboform.com/platforms/browsers/firefox has this at the top:
Troubleshooting and Frequently Asked Questions
Please read [http://www.roboform.com/support/faq/roboform-v7#faq_firefox RoboForm ver 7 Firefox FAQ] for troubleshooting and common issues.
Under the [http://www.roboform.com/support/faq/roboform-v7#faq_firefox RoboForm ver 7 Firefox FAQ] I found:
'''RoboForm Toolbar does not appear in Firefox. What to do?'''
1) Uninstall all RoboForm-related items from Firefox: Tools -> Add-ons.
2) Reinstall latest version of RoboForm and be sure to check Firefox checkbox in Browser Integration window of RF installer.
3) Make sure RoboForm is enabled in Firefox AddOns:
- In Firefox select Tools -> Add-Ons -> Extensions.
- Click RoboForm Toolbar addon, click Enable if it is disabled.
- Restart Firefox browser. 
<snip>
If the RoboForm Toolbar is installed, it should appear in the Firefox Add-ons Extensions list. Make sure it is enabled. See
[[Disable or remove Add-ons]] for how extensions can be disabled or enabled.
If you have problems with installing the RoboForm Toolbar or if you can't get it to work, your best bet would be to ask for help from RoboForm Support: http://www.roboform.com/support/overview

Hierarchy Viewer does not load after clicking on the + icon

Premise: I have a hierarchy viewer with multiple levels of master-detail with different VOs.
The inputs to the taskflow containing this page are the key and VO type. The tree should render until that VO which matches the type and key and all the next level children under it. The user can expand the nodes under these children at will to drill further.
Issue: I am able to render the tree with results. When I click on the + icon to drill on the children, I see that the backend code for fetching the children is called. But, the tree does not display. It shows the loading icon forever.
Example:
Organization - PO - POItem - Vendor - VendorSite -VendorAddress
 - Responsible - ContactDetails
 - Project - SubProject - Location
TaskFlow Input: Vendor, 12345
The tree should dispaly Organization - PO - POItem - Vendor(12345) - VendorSite(for 12345)
 -Responsible(for 12345)
If the user expands any of the VendorSites, the VendorAddresses should be shown
Technical Details: JDeveloper Version: 11.1.2.1.0
Code: To filter the children, I am overriding the CreateViewLinkAccessorRS in the VOImpls. I am passing bind variables to the VO criterion to check the paths.

@Arunkumar: Yes, I ran the AM tester and I am able to see the results properly for all the VOs and levels.
I created a sample on the HR Schema and tested. I see that when I click on the Employee node for expansion(can be checked with the data or the short description), it hangs with the load icon.
I do not see anything in the log other than:
<RegionRenderer> <encodeAll> The region component with id: r1 has detected a page fragment with multiple root components. Fragments with more than one root component may not display correctly in a region and may have a negative impact on performance. It is recommended that you restructure the page fragment to have a single root component.
I do not see any upload options here to give my testcase. So, I uploaded to this link: https://www.dropbox.com/s/vybip3owzuziz86/HRHierarchyViewer.zip
Please let me know if I can do this elsewhere for easy access.
Message was edited by: Divya Bellamkonda

Setup.exe file does not run after the download

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name East
- Filename All the disks, 1 through 3, have been downloaded and extracted.
- Date/Time Aug 7, 2002
- Browser + Version
- O/S + Version
- Error Msg
I am unable to run the setup.exe file in Disk1 directory. I think we need more information on how to install the server. Please help us ASAP.

I found out that besides setting the library, I should also set the classpath.
I tried to set the classpath by setting the environment variable CLASSPATH: path1.jar; path2.jar; path3.jar.
I also tried to set it with the command prompt:
CLASSPATH = path1.jar; path2.jar; path3.jar.
But when double clicking on my .exe file, it still does not run and I still get the NoClassDefFoundError.
Please help. Thanks!

Ipod touch does not work after I downloaded 2.0

this evening i noticed there was a new new download with new apps and I spent the money to download it. while it was downloading there was a part about backing up my ipod . well appearantly there was an error and I went on to click continue assuming i would jsut have to relaod music and contacts and so on and so forth. well after the download was complete I connected it to i tunes and it shows up but i can't do anything from there. I unpluged it and pluged it in, tried apples 5 r's and now itunes does not even recognize my i pod is plugged in! any suggestions

Hey!
You might get some joy with this......
iPod Touch won't start up
See Skwarks post to use Recovery Mode.
Cheers,
John

File does not exist after ftp downloading

Hi all,
I have a really strange problem.
I'm getting a file from a remote server (ftp "get"), the process ends with no exceptions, but when I go to the specific directory where the file should have been - there is nothing there.
I tried to get the file manually through acommand line ftp and it succeeded, but performing the same operation in the java code gives me no result.
I also scanned the entire hard-disks but again - the file does not exist anywhere.
Any idea? Anyone?

performing the same
operation in the java code gives me no result.Obviously not the same operation. As Hiwa says, impossible to say further without some code.

Hp software interface does not load after installing printer 6500A plus

I own a 6500A plus printer that is connected via wifi to my windows 8.1 laptop. At certain point in time the desktop icon stopped functioning, i.e double cliking it does not do anything. The same happens if i do that through start->programs->hp...
more info:
1. running HP Officejet 6500 E710n-z.exe from the install folder does nothing (also when running as admin)
2. installation of the software (the full package) completes with no errors
3. printer prints fine and scans throught the printer interface wihtout a problem
4. tried uninstall and reinstall 2-3 times, both as a wireless printer and USB printer, no errors during install
5. The hp print and scan doctor, finds no problem and at the end im able to run Test Scan and the interface opens and works fine.
6. i ran sfc /scannow it says it founds some problems it cant repair - dont know if it means anything
7. in the Devices and Printers screen i see the printer listed and i'm able to print a test page
dontknow what to do next

Hello Salmonela,
Welcome to the HP Support Forums!
That is a very well done post, very informative. Regarding the software interface not loading, I would like to suggest a means of uninstall and install that you may not have tried.
I would like you to use the Microsoft Fixit to uninstall. Then use the HP Printer Install Wizard to install the software again.
Let me know if this clears things up.
Happy Turkey Day!
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

After upgrading FireFox to V 26.0 Real Player does not load. I downloaded Real P but it will not execue. Says "side by side config is incorrect. Please see th

Videos don't load, just black screen. Followed instructions and download Real Player. Real Player does not execute, provides message "The application failed to start because its side-by-side configuration is incorrect. Please see application event log or use the command-line sxtrace.exe tool for more detail."
Can you please tell me where to go from here?

Hi, its microsoft issue, please go-through the below link
*http://support.microsoft.com/kb/2525435
*http://answers.microsoft.com/en-us/windows/forum/windows_7-pictures/error-the-application-has-failed-to-start-because/df019c0d-746e-42d0-ad68-465e18e3f3ef

Qosmio G50-12q - Vista does not load after connecting external USB keyboard

I have acquired a keyboard enermax acrilux usb and have connected the taken keyboard to the qosmio g50 12q at the same one where an other keyboard was attacked usb and that it worked without problems.
After to start the PC with keyboard eneramx connected the qosmio has not loaded windows vista ultimate and the inner impellers have been activated.
Never happened previously. I have doubted of the enermax
Reconnected to taken usb the mail of the qosmio it has on the back not given to problems of start of impellers
As the enermax it never has blocked the start of the system operating and put in function the impellers also having connected it to the same one taken usb to which precedence was connected one keyboard ?
Tank you

Hi mate
Sorry but you message I really hard to understand
What I understand is that you connected an external keyboard to the Qosmio and now the notebook does not boot up correctly. Is it right?
What to say; maybe you should disable the USB legacy mode in BIOS.
Please check this!
To get into the BIOS press F2 and while powering up the notebook.

Firefox does not open after I downloaded Microsoft antivirus, why? How to fix it?

Firefox worked fine on my desktop for years but when I downloaded Microsoft antivirus two days ago, Firefox does not work. It will not open anymore.

Thanks LN.
Now that I got an expert's attention, there are two problems that bug me all the time and have not able to get an explanation/solution:
1. After restart, the trackpad lost it's ability to tab and click. I always have to use the mouse to tap the user (myself) to get the tiny signin password window. After that, all trackpad functions work fine. This happens for me through Marverik and now Yosemite.
2. This one only happens recently after Yosemite upgrade. Everytime after restart, I have to reset my Verizon Router manually in order to establish network connection to access internet sites.
Thank you for your help,
...Jeff

Lightroom does not work after the download

I bought and downloaded Lightroom 5 and it does not work. It does not allow me to do anything. It looks like it is not activated. I have downloaded it 2 times and still have the same problem.

You need to provide system information and explain what exacxtly isn't working.
Mylenium

Morning Coffee for version 10.0.2 does not load. Why?

Does this extension work with 10.0.2? If not, how do I go back to one that it does?

I have tried to reinstall it, but it doesn't seem to reinstall. I cannot tell which version of "Morning Coffee" I have. I don't know how to delete it to reinstall it, as I cannot seem to find it.

ITunes update version 10.6.3 does not load after selecting "download"

Similar Messages

Maybe you are looking for