ITunes upgrade failed on Vista  PC,  I now have no Itunes

I had a working installation of Itunes and Quicktime on my Vista PC. The only problem was on each launch I was greeted with a message that a new version was available and presented with an option to upgrade. The upgrade always failed with a message that I should try the stand-alone installer. Also failed to upgrade. I uninstalled ITunes (from add/remove SW) hoping a new install would be the answer. Unistall worked fine. Itunes is gone.
New install does not succeed. It ends on a message:
“Error getting file security: C:\ProgramData\Apple\Computer\Installer Cache\Quicktime 7.55.90.70\ GetLastError:5”
Followed by “Rolling Back Actions” and “The Installation of Quicktime did not complete successfully. iTunes requires QuickTime.”
I have a working installation of QuickTime version 7.5.5. It opens without error from the default install location. However, attempts to ‘Update Existing Software’ fail with the same “Error getting file security…” message and “Rolling back…” message. Same response on attempting to uninstall QuickTime from Add/Remove Software.
Where I previously had a working version of iTunes with only an annoying popup message, I now have no iTunes at all. I do have a working down rev QuickTime (that I cannot remove) but that is of no use to me without iTunes.
I need help to remove QuickTime so I can proceed from ground zero. I assume this is likely a Windows registry issue. I am competent to maker registry edits but not by trial and error. I need more knowledgeable advice on how to proceed.
Thanks

Just a thought, but maybe consider returning the device.  Seems it might be a bit too complicated for you.

Similar Messages

  • After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing.  What has happened?

    After I upgraded my iPad 2 to 6.1.3 I now have a itunes logo and USB cable showing.  What has happened?  What do I do to get by this.  I can not shut the iPad down at all.

    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • My iTunes has gone and is saying it is out of date. I tried installing a beta of 10.5 i think last night. However it hasn't worked and i now have no iTunes. Can anyone help?

    Can anyone help? Tried installing a beta of itunes. It hasnt worked. 10.5 i think. i now have no itunes. my old itunes is now reading as out of date when i try to go in.

    The 10.5 Beta version should only be available to those that have subscribed to the Developer channel, and not to anyone else.
    The latest version that is available to all is 10.4.1: iTunes 10.4.1

  • HT4623 I have the latest iTunes software on my iMac mini and now have IOS7 on my iPhone and now I cant sync music from my library either by wifi or by usb?

    I have the latest iTunes software on my iMac mini and now have IOS7 on my iPhone and now I cant sync music from my library either by wifi or by usb? I get song lists that scoll at a million miles an hour but no actual content. What should I do to get my music onto my iphone.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • I have upgraded to a new computer.   I have installed iTunes from the internet and copied my music from the old hard drive to my new one.  What do I need to do to get my new computer to recognize my old playlist?

    I have upgraded to a new computer.   I have installed iTunes from the internet and copied my music from the old hard drive to my new one.  What do I need to do to get my new computer to recognize my old playlist?

    See https://support.mozilla.com/en-US/kb/Backing%20up%20and%20restoring%20bookmarks
    and
    https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information?s=new+computer&r=4&as=s#os=win&browser=fx8

  • I had my itunes library on an external drive, I now have a new Windows 7 computer. How can I access my library?

    I had my itunes library on an external drive, I now have a new Windows 7 computer. How can I access my library?

    Hello, robertfromboulder city.
    Thank you for the question.  You can direct iTunes to read your media off your external drive.  To do this, follow the instructions below.  See the section in the first article labeled Discovering and changing the iTunes Media folder location.
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    iTunes: Back up your iTunes library by copying to an external hard drive
    http://support.apple.com/kb/ht1751
    Cheers,
    Jason H. 

  • Just upgraded to iOS5 on ipad2 and now have all my old emails to delete. Is there a way to select all like in trash and then delete all?

    just upgraded to iOS5 on ipad2 and now have all my old emails to delete. Is there a way to select all like in trash and then delete all?

    Thanks for the feedback, the question is that it will syn all the folders that I have checked, and its total up to 6000 photos which was taking me one whole day to syn. I am seeking is there away that what have already in my Iphone will not be delected if I did not checked on the next syn, and only add in the new album that was checked.

  • I now have an itunes 2 and cannot find 1 where all of my music etc is/also getting a compatability error/tried to remove and install again and stil hav itunes 2

    I now have an itunes 2, cannot find my itunes original tht has all of my music, tv shows etc. on it.  I have deleted all and comes back as same itunes2/also get a compatability error/also now it won't recognize my ipod touch.

    HI Jazzy, caveat first. I'm not hugely experienced with iTunes and syncing music, BUT, I think the problem is your switch of Apple ID. The music you had before 'belongs' the the previous family AppleID. When you switched ID, then iTunes didn't associate the new ID with the old music list.
    Try this:
    Log back in with the family ID. Either change the credit card number to your own, or add your credit card to the family one. You should be able to delete it later when you have finished. Then you should be able to download the Justin Timberlake album to the family account.
    My suspicion is that by logging back in with the original ID, all the music should be back.

  • We are upgrading to apple 5s from android i have an ituns account. will i need anothe account for my wife. 2 apple phones how many itunes acconts Please Thank-you Moose in Utah

    We are upgrading to apple 5s from android i have an ituns account. will i need anothe account for my wife. 2 apple phones how many itunes acconts Please Thank-you Moose in Utah

        Hello mooseinutah, getting a new phone is always exciting! You will want to make sure to setup 2 separate Apple Id & passwords for each phone so that contacts & stored information are not merged between both devices.
    WiltonA_VZW
    VZW Support
    Follow us on twitter @VZWSupport

  • HT1420 Recently a itunes upgrade failed.  I tried to install it manually as instructed still no go.  I uninstalled itunes and tried to re-install but now i just get a message Apple Mobile Device failed to start-verify you have sufficient privleges to star

    A upgrade to my windows 7 computer failed.  they told me to manually install it that failed and unintalled itunes.  When i tried to reinstall
    it won't and gives me a message that the Apple Mobile Device failed to start- Verify that you have suffiicient priveleges to start system
    services.  I also have itunes on a laptop, ipod and ipad mini.  Please help.

    Hi there willjay3976,
    You may find the troubleshooting steps in the article below helpful.
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    -Griff W. 

  • Itunes update failed on 2 computers, couldn't find msvcr80.dll files.Now have no itunes at all

    iTunes update failed on both computers. Couldn't find msvcr80.dll, now I have no iTunes at all. Is it iTunes or the computers?

    Beth Trachtenberg wrote:
    I did NOT move the other folders (Album Artwork, Mobile Applications, Playlists, Previous iTunes Libraries) or files (iTunes Library, iTunes Library Extras, iTunes Library Genius, iTunes Music Library) that are located inside the Music/iTunes folders.
    should be no problem. i'm doing this also.
    Everything was working fine on both computers - Consolidated the library on the external drive and did the Change the location of the iTunes Media folder in Preferences on both computers, no problem.
    However I added two movies and a few songs to my desktop Mac yesterday - all showed up and played fine after adding them - but when I plug the external drive into my laptop, the new additions don't appear in the library.
    if you're purchasing content from the iTMS, you could use _*Home Sharing*_ to automatically add new content to all machines on your local network.
    Am I right in guessing that it is because the iTunes Library file on the laptop isn't the same as the one on the desktop computer?
    yes.
    Is there a way to add them to the library listing on the laptop? If yes, is that something I need to do every time I connect the external drive to the laptop if I've added things from the desktop computer (I never add stuff on the laptop).
    basically, yes. however, there's _*Home Sharing*_ and ... see below.
    Should I have put the entire iTunes folder - files, folder and media - onto the external drive?
    that's one possibility, however, only one Mac @ a time could access that library. there are other options:
    *the easy way*
    check out TuneRanger.
    *the more involved way*
    click here for tips/information.
    JGG

  • ITunes upgrade fails due to QuickTime

    I tried to upgrade my iTunes to version 9.3.xx. Unfortunately the upgrade failed. The application since then is not opened and the following error message appeared.
    “Error writing the file c:\Program Files\Quick Time\QTTask.exe
    Verify that you have access to that directory”
    I followed all the support suggestions uninstalling all the Apple applications and re-installed them back but with no luck. The above message appears every time iTune is trying to install QuickTime and as iTunes needs QuickTime the whole upgrade fails.
    Any suggestion how I can solve this issue?
    BR// Markos

    “Error writing the file c:\Program Files\Quick Time\QTTask.exe ... Verify that you have access to that directory”
    That's consistent with disk/file damage, Markos.
    Let's first try running a chkdsk over your C drive. There's instructions and a guided help in the following Microsoft document:
    [How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
    Does the chkdsk find/repair any damage? If so, are you able to successfully reinstall QuickTime afterwards?

  • ITunes upgrade fails

    Every attempt to install iTunes upgrades since 0.1.0.79 has failed. It was suggested to download and install manually. This also fails. Any thoughts or suggestions appreciated.
    ken

    “Error writing the file c:\Program Files\Quick Time\QTTask.exe ... Verify that you have access to that directory”
    That's consistent with disk/file damage, Markos.
    Let's first try running a chkdsk over your C drive. There's instructions and a guided help in the following Microsoft document:
    [How to perform disk error checking in Windows XP|http://support.microsoft.com/kb/315265]
    Does the chkdsk find/repair any damage? If so, are you able to successfully reinstall QuickTime afterwards?

  • Upgraded to Windows Vista computer and now my ipod won't show videos/pics

    I recently bought a new computer. Around the same time my ipod broke and I got a brand new one. Everything works on it except the videos and I can't sync any pics. The videos will show up in my recently added list, with the little tv pic but if click on it, I only get audio. The same thing happens under the recently added in my video playlist. However none of the videos, podcasts, or movies show up under their respective menus. All software is up to date, and all of the equipmnt is new. I'm at a loss. Please help.

    You need iTunes 11.1  or later
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Upgraded from Tiger to Snow Leopard - now have problems with basic apps?

    I have a 2007 iMac (5.1, 2007) dual core. It's capable of running Snow Leopard and Lion (but not, I believe ML).
    I just bought the upgrade SL discs from Apple and installed them as an upgrade, moving up to 10.6.3 (from the discs). After running software update I'm now on 10.6.8.
    Since upgrading I've successfully run Time Machine. However I have the following problems:-
    A bunch of emails were present in the Inbox, but contained no body text - just the subject line. I have managed to since find most of them successfully from TM. This is a minor annoyance but I thought I'd mention it.
    ITunes won't boot up. It booted the first time I tried it, but since then the little icon just bounces up and down.
    Certain apps won't quit properly. I quit from the top menu, but the little blue light remains under the icon in the dock. I then have to 'Force Quit - Application Not Responding' *every time*.
    Safari frequently won't load up bookmarked or seach pages, the progress bar gets stuck part way across and I stare at the rainbow pinwheel for ages, before having to quit, then Force Quit, then restart Safari and try again.
    Now, I'm tempted to do a Clean Install, but after four international moves (Singapore-Australia-UK-Canada) I no longer have any of the original discs, and thus as I understand it will lose iLife. And iLife 11 needs Lion.
    I've done a disc permissions repair thing via the Mac Disc Utility. I've run a few clean-up operations via Onyx.
    Any suggestions gratefully received. My Mac as been running great for years, but this upgrade has been extremely disappointing thus far.
    thanks
    Feargus

    Hi baltwo
    Many thanks for your advice. I've read all the links and will be buying a 2nd external HD to do a SuperDuper back up. I already had a 1Tb drive with Maxtor back up on it, and I also managed to get a Time Machine back up as well, so at least my data should be safe.
    Qn - If I back up the System and Utility folders as well as the Home folder, I don't suppose I can restore them after an install and everything (eg iLife) will 'just work'?
    Anyway, I went straight from Tiger to Snow Leopard. I don't have any Tiger discs either (see reasons above) so now have no way of restoring original set up. I tried to boot from the SL install CD and then hold 'C' but must be getting something wrong as I don't get the Disk Utility pop up. It just boots as normal to the desktop.
    Anyway, via the normal Disc Utitlity I've done a Repair Permissions again with no major issues. However, my Onyx software now won't run at all so I can't clean any caches a second time.
    I've contacted the Apple rep who sold be the SL discs but she's not got back to me yet re iLife.
    This weekend I'm going to try a fresh upgrade. If that fails I'll try Erase and Install, if I can get the 'C' button timing right. I'll update if I have any successs.
    cheers
    f

Maybe you are looking for

  • Goods Receipt PO - GetByKey error

    Hello, I have added a user button on Goods Receipt PO. When I click the button I read the document number of the receipt (idocnum). With this number I want to find the correct receipt in the object: oGRPO = (SAPbobsCOM.Documents)oCompany.GetBusinessO

  • Statistical WBS element posting - Asset

    Hi, From the SAP help on AS03 transcation field on Origin tab >Account Assignmnet for investment  - WBS element  , I see the following information. WBS element investment project Enter the WBS element here, if the system should automatically make sta

  • Troubles with attached libraries - Forms6i

    I'm working with Forms6i (6.0.8.8.0). I have some troubles with attached libraries. I have to modify an old forms project. All server elements are on the original server computer (database, sources, libraries , ect..). Now I installed on a new client

  • Problem printing from cs6 photoshop to epson stylus pro 4800 printer

    Has anyone had trouble printing from cs6 on a mac running lion to a epson stylus pro 4800 printer?   I keep getting an error message saying  "There was an error opening your printer. Printing functions will not be available until you have selected a

  • WebLogic 10.3 and Kerberos

    Does WebLogic Server 10.3 require that Kerberos preauthentication be enabled or disabled? I have a system that is experiencing some intermittent authentication issues. The Active Directory Authenticator is setup in WebLogic and my AD users can succes